- 23 Nov, 2009 8 commits
-
-
Peter Zijlstra authored
It appeared we did call update_event_times() on exit, but we failed to update the context time, which renders the former moot. Locking is a bit iffy, we call update_event_times under ctx->mutex instead of ctx->lock - the next patch fixes this. Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20091123103819.764207355@chello.nl> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Peter Zijlstra authored
If we leave the event in STATE_INACTIVE, any read of the event after the detach will increase the running count but not the enabled count and cause funny scaling artefacts. Signed-off-by:
-
Peter Zijlstra authored
Signed-off-by:
-
Peter Zijlstra authored
We had two almost identical functions, avoid the duplication. Signed-off-by:
-
Ingo Molnar authored
The structure init creates a bit memcpy, which shows up big time in perf annotate output: : ffffffff810a859d <__perf_sw_event>: 1.68 : ffffffff810a859d: 55 push %rbp 1.69 : ffffffff810a859e: 41 89 fa mov %edi,%r10d 0.01 : ffffffff810a85a1: 49 89 c9 mov %rcx,%r9 0.00 : ffffffff810a85a4: 31 c0 xor %eax,%eax 1.71 : ffffffff810a85a6: b9 16 00 00 00 mov $0x16,%ecx 0.00 : ffffffff810a85ab: 48 89 e5 mov %rsp,%rbp 0.00 : ffffffff810a85ae: 48 83 ec 60 sub $0x60,%rsp 1.52 : ffffffff810a85b2: 48 8d 7d a0 lea -0x60(%rbp),%rdi 85.20 : ffffffff810a85b6: f3 ab rep stos %eax,%es:(%rdi) None of the callees depends on the structure being pre-initialized, so only initialize ->addr. This gets rid of the memcpy overhead. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: -
Ingo Molnar authored
Decreases perf overhead when function tracing is enabled, by about 50%. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: -
Simon Kaempflein authored
Print more accurate error message when "perf record" fails because there is no APIC support, on x86. Signed-off-by: -
Michael S. Tsirkin authored
gcc with no flags typically is a sane default for systems to use, and looking at the running kernel is probably broken for cross-builds anyway, so let's not do this. Add EXTRA_CFLAGS so that users can override default gcc mode if they want to. Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
Arjan van de Ven <arjan@infradead.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <20091122121335.GA24254@redhat.com> Signed-off-by:
-
- 22 Nov, 2009 12 commits
-
-
Arnaldo Carvalho de Melo authored
Bug introduced in 439d473b, making the initial map be used for all IPs, so that symbols outside this initial map would either be erroneously resolved or not resolve at all. Reported-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1258909162-28496-1-git-send-email-acme@infradead.org> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
Suggested-by:
-
Michael S. Tsirkin authored
On error, suggest installing static libraries along with shared libraries. Signed-off-by:
-
Michael S. Tsirkin authored
Make standard error show up on console when V=2 is set. Signed-off-by:
-
Ingo Molnar authored
Fix: ERROR: "perf_swevent_put_recursion_context" [fs/ext4/ext4.ko] undefined! ERROR: "perf_swevent_get_recursion_context" [fs/ext4/ext4.ko] undefined! Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Jason Baron <jbaron@redhat.com> LKML-Reference: <1258864015-10579-1-git-send-email-fweisbec@gmail.com> Signed-off-by: -
Pekka Enberg authored
The write_event() function in builtin-record.c writes out all mmap()'d DSOs including non-ELF files like GNOME resource files and such. Therefore, check for ELF_K_ELF in filename__read_build_id() before attempting to read the ELF header with gelf_getehdr(). Fixes the following error messages when running "perf kmem record": penberg@penberg-laptop:~/src/linux/tools/perf$ perf kmem record ^C[ perf record: Woken up 2 times to write data ] [ perf record: Captured and wrote 0.753 MB perf.data (~32885 samples) ] filename__read_build_id: cannot get elf header. filename__read_build_id: cannot get elf header. filename__read_build_id: cannot get elf header. filename__read_build_id: cannot get elf header. filename__read_build_id: cannot get elf header. filename__read_build_id: cannot get elf header. filename__read_build_id: cannot get elf header. filename__read_build_id: cannot get elf header. filename__read_build_id: cannot get elf header. Signed-off-by:
Pekka Enberg <penberg@cs.helsinki.fi> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1258885784-11709-1-git-send-email-penberg@cs.helsinki.fi> Signed-off-by:
-
Pekka Enberg authored
This patch adds support for "--sort hit" and "--sort frag" to the "perf kmem" tool. The former was already mentioned in the help text and the latter is useful for finding call-sites that exhibit worst case behavior for SLAB allocators. Signed-off-by:
-
Márton Németh authored
The buffer is first zeroed out by memset(). Then strncpy() is used to fill the content. The strncpy() function also pads the string till the end of the specified length, which is redundant. The strncpy() does not ensures that the string will be properly closed with 0. Use strlcpy() instead. The semantic match that finds this kind of pattern is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression buffer; expression size; expression str; @@ memset(buffer, 0, size); ... - strncpy( + strlcpy( buffer, str, sizeof(buffer) ); @@ expression buffer; expression size; expression str; @@ memset(&buffer, 0, size); ... - strncpy( + strlcpy( &buffer, str, sizeof(buffer)); @@ expression buffer; identifier field; expression size; expression str; @@ memset(buffer, 0, size); ... - strncpy( + strlcpy( buffer->field, str, sizeof(buffer->field) ); @@ expression buffer; identifier field; expression size; expression str; @@ memset(&buffer, 0, size); ... - strncpy( + strlcpy( buffer.field, str, sizeof(buffer.field)); // </smpl> On strncpy() vs strlcpy() see http://www.gratisoft.us/todd/papers/strlcpy.html . Signed-off-by:
Márton Németh <nm127@freemail.hu> Cc: Julia Lawall <julia@diku.dk> Cc: cocci@diku.dk Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <4B086547.5040100@freemail.hu> Signed-off-by:
-
Frederic Weisbecker authored
So that we can include this header from userspace tools, like perf tools, to get the breakpoint types and len definitions. Signed-off-by:
Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Prasad <prasad@linux.vnet.ibm.com> LKML-Reference: <1258863695-10464-4-git-send-email-fweisbec@gmail.com> Signed-off-by:
-
Frederic Weisbecker authored
Remove asm/processor.h and asm/debugreg.h as these headers are not used anymore in the hw-breakpoints core file. Signed-off-by:
-
Frederic Weisbecker authored
We are never in an NMI context when we commit a syscall trace to perf. So just forget about the nmi buffer there. Signed-off-by:
-
Frederic Weisbecker authored
When we commit a trace to perf, we first check if we are recursing in the same buffer so that we don't mess-up the buffer with a recursing trace. But later on, we do the same check from perf to avoid commit recursion. The recursion check is desired early before we touch the buffer but we want to do this check only once. Then export the recursion protection from perf and use it from the trace events before submitting a trace. v2: Put appropriate Reported-by tag Reported-by:
Peter Zijlstra <peterz@infradead.org> Signed-off-by:
-
- 21 Nov, 2009 20 commits
-
-
Arnaldo Carvalho de Melo authored
It better propagate errors, also if we do a simple: [root@doppio linux-2.6-tip]# perf record -R -a -f sleep 3s ; perf trace [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.182 MB perf.data (~7972 samples) ] Fatal: not an trace data file [root@doppio linux-2.6-tip]# That is what is expected, right? I.e. as we didn't specify any tracepoint event via -e, it should gracefully bail out and not SEGFAULT. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
Signed-off-by:
-
Arnaldo Carvalho de Melo authored
We better call this routine after both the kernel and modules are loaded, because as it was if there weren't modules it would not be called, resulting in kernel_map->end remaining at zero, so no map would be found and consequently the kernel symtab wouldn't get loaded, i.e. no kernel symbols would be resolved. Also this fixes another case, that is when we _have_ modules, but the last map would have its ->end address not set before we loaded its symbols, which would never happen because ->end was not set. Reported-by:
-
Stephane Eranian authored
This patch fixes the default watermark value for the sampling buffer. With the existing calculation (watermark = max(PAGE_SIZE, max_size / 2)), no notification was ever received when the buffer was exactly 1 page. This was because you would never cross the threshold (there is no partial samples). In certain configuration, there was no possibilty detecting the problem because there was not enough space left to store the LOST record.In fact, there may be a more generic problem here. The kernel should ensure that there is alaways enough space to store one LOST record. This patch sets the default watermark to half the buffer size. With such limit, we are guaranteed to get a notification even with a single page buffer assuming no sample is bigger than a page. Signed-off-by:
Stephane Eranian <eranian@gmail.com> Signed-off-by:
-
Peter Zijlstra authored
We should hold event->child_mutex when iterating the inherited counters, we should hold ctx->mutex when iterating siblings. Signed-off-by:
-
Peter Zijlstra authored
Properly account the full hierarchy of counters for both the count (we already did so) and the scale times (new). Signed-off-by:
-
Peter Zijlstra authored
Most sites updating ctx->time and event times do so under ctx->lock, make sure they all do. This was made possible by removing the __perf_event_read() call from __perf_event_sync_stat(), which already had this lock taken. Signed-off-by:
-
Peter Zijlstra authored
cpuctx is always active, task context is always active for current the previous condition verifies that if its a task context its for current, hence we can assume ctx->is_active. Signed-off-by:
-
Peter Zijlstra authored
Removes constraints from __perf_event_read() by leaving it with a single callsite; this callsite had ctx->lock held, the other one does not. Removes some superfluous code from __perf_event_sync_stat(). Signed-off-by:
-
Peter Zijlstra authored
Both callers actually have IRQs disabled, no need doing so again. Signed-off-by:
-
Peter Zijlstra authored
Remove an update_context_time() call from the perf_event_task_sched_out() path and into the branch its needed. The call was both superfluous, because __perf_event_sched_out() already does it, and wrong, because it was done without holding ctx->lock. Place it in perf_event_sync_stat(), which is the only place it is needed and which does already hold ctx->lock. Signed-off-by:
-
Peter Zijlstra authored
As Corey reported, the total_enabled and total_running times could occasionally be 0, even though there were events counted. It turns out this is because we record the times before reading the counter while the latter updates the times. This patch corrects that. While looking at this code I found that there is a lot of locking iffyness around, the following patches correct most of that. Reported-by:
Corey Ashford <cjashfor@linux.vnet.ibm.com> Signed-off-by:
-
Peter Zijlstra authored
Remove a rcu_read_{,un}lock() pair and a few conditionals. We can remove the rcu_read_lock() by increasing the scope of one in the calling function. We can do away with the system_state check if the machine still boots after this patch (seems to be the case). We can do away with the list_empty() check because the bare list_for_each_entry_rcu() reduces to that now that we've removed everything else. Signed-off-by: -
Peter Zijlstra authored
Remove a rcu_read_{,un}lock() pair and a few conditionals. We can remove the rcu_read_lock() by increasing the scope of one in the calling function. We can do away with the system_state check if the machine still boots after this patch (seems to be the case). We can do away with the list_empty() check because the bare list_for_each_entry_rcu() reduces to that now that we've removed everything else. Signed-off-by: -
Peter Zijlstra authored
Remove a rcu_read_{,un}lock() pair and a few conditionals. We can remove the rcu_read_lock() by increasing the scope of one in the calling function. We can do away with the system_state check if the machine still boots after this patch (seems to be the case). We can do away with the list_empty() check because the bare list_for_each_entry_rcu() reduces to that now that we've removed everything else. Signed-off-by: -
Peter Zijlstra authored
Remove a rcu_read_{,un}lock() pair and a few conditionals. We can remove the rcu_read_lock() by increasing the scope of one in the calling function. We can do away with the system_state check if the machine still boots after this patch (seems to be the case). We can do away with the list_empty() check because the bare list_for_each_entry_rcu() reduces to that now that we've removed everything else. Signed-off-by: -
Peter Zijlstra authored
Avoid the rather expensive perf_swevent_set_period() if we know we have to sample every single event anyway. Signed-off-by:
-
Peter Zijlstra authored
in-kernel perf users might wish to have custom actions on the sample interrupt. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
So that the user have a clearer indication about the source of the symbols, as we only state buildid mismatches in verbose mode, because 'perf top' would overwrite such warning anyway. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
E.g.: [root@doppio linux-2.6-tip]# perf top -v --vmlinux ../build/tip/vmlinux > /dev/null build_id in vmlinux is e96699725a47413a50c231864a8e7a8ced40a31b while expected is 18e7cc53db62a7d35e9d6f6c9ddc23017d38ee9a, ignoring it I.e. perf top was told to use a vmlinux file that is not the one currently running on the machine, it ignores it and falls back to using /proc/kallsyms. This solves many, at first, mysterious results when people have a stale vmlinux file while keeping the default of trying to use the vmlinux file in the current directory in things like 'perf annotate' where the DWARF info is required and thus we can't use just /proc/kallsyms. Modules buildids are already being checked as of the previous changeset in this series, because we are using the default dso__load routine, that will look at a series of places looking for the best file with a matching buildid, starting in the -debuginfo directories. Signed-off-by:
-
