- 28 Oct, 2013 8 commits
-
-
Olof Johansson authored
Merge tag 'omap-for-v3.13/dt-late' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Some more dts changes from Benoit Cousson <bcousson@baylibre.com> via Tony Lindgren: - Add a lot of N900 nodes - Add OPP table to OMAP5/DRA7 - Add support for Newflow NanoBone board - Add i2c aliases - Add McASP and audio support - Add reset/idle on init bindings for OMAP - Add more nodes for AM4272 * tag 'omap-for-v3.13/dt-late' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (42 commits) ARM: dts: omap5-uevm: Remove pinmux for dmic pins ARM: dts: omap5-uevm: Correct twl6040 reset GPIO pinmux ARM: dts: TWL4030: Add power button support ARM: dts: omap3-n900: Add LP5523 support ARM: dts: omap3-n900: Add TLV320AIC3X support ARM: dts: omap3-n900:: Mux RX51_LCD_RESET_GPIO in DTS ARM: dts: omap3-n900: Add NAND support ARM: dts: omap3-n900: Specify regulator info ARM: dts: TWL4030: Add missing regulators ARM: dts: omap3-n900: Add LP5523 support ARM: dts: omap3-n900: Add vibrator device ARM: dts: omap3-n900: GPIO key definitions ARM: dts: omap3-n900: Add support for SD cards ARM: dts: omap3-n900: Add UART support ARM: dts: omap3-n900: Fix i2c bus speed ARM: dts: omap3-n900: Add pinctrl for i2c devices ARM: dts: DRA7: Add CPU OPP table ARM: dts: OMAP5: Add CPU OPP table ARM: dts: dra7-evm: add smps123 supply for CPU ARM: dts: omap5-uevm: add smps123 supply for CPU ... Signed-off-by:
Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'omap-for-v3.13/cpufreq-late' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt From Tony Lindgren: Few patches to make cpufreq work for omap3 with device tree. Note that this branch has a dependency to the patches merged with omap-for-v3.13/board-removal-signed-take2. * tag 'omap-for-v3.13/cpufreq-late' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP3+: use cpu0-cpufreq driver in device tree supported boot ARM: OMAP2+: add missing lateinit hook for calling pm late init ARM: OMAP3+: do not register non-dt OPP tables for device tree boot Signed-off-by:
-
git://git.infradead.org/linux-mvebuOlof Johansson authored
From Jason Cooper, mvebu dt changes for v3.13 (round 4): - mvebu - core divider clock driver dt binding and nodes * tag 'dt-3.13-4' of git://git.infradead.org/linux-mvebu: ARM: mvebu: Add the core-divider clock to Armada 370/XP ARM: mvebu: Add a 2 GHz fixed-clock Armada 370/XP ARM: mvebu: Add Core Divider clock device-tree binding -
git://git.linaro.org/people/shawnguo/linux-2.6Olof Johansson authored
From Shawn Guo: The imx/mxs device tree changes for 3.13: - Use macros for mxs pinctrl settings - New board support: VF610 Cosmic/Cosmic+, imx6q-udoo, MSR M28CU3 - Support DSPI device for vf610 - Add PCIe device for imx6qdl - Add UHS pinctrl states for imx6sl and imx6qdl - Display support for APF and imx51-babbage boards - Enable SPI NOR and USB for imx6sl-evk board - Enable LVDS for imx6q-sabrelite and SPDIF for imx6qdl-wandboard - Misc updates on boards: TX28, imx6qdl-wandboard, imx53-qsb etc. - Some random updates on imx51 device tree * tag 'imx-dt-3.13' of git://git.linaro.org/people/shawnguo/linux-2.6: (44 commits) ARM: imx: imx6sl iomuxc syscon is compatible to imx6q ARM: dts: imx6sl-evk: enable the SPI NOR ARM: dts: imx6sl: add a pinctrl for ECSPI1 ARM: imx27: add missing #pwm-cells property ARM: dts: imx6sl: add pinctrl uhs states for usdhc ARM: dts: imx6qdl-sabresd: Add backlight support for lvds ARM: dts: imx51-babbage: Make DVI and WVGA panel functional ARM: imx27-apf27dev: Add framebuffer support ARM: imx51-apf51dev: Add parallel display support ARM: dts: imx53-qsb: Do not use GPIO1_8 as wakeup source ARM: dts: imx53-qsb: SDHC1 does not have cd-gpios ARM: dts: imx53-qsb: SDHC3 is connected in 8-bit mode ARM: dts: mxs: Add MSR M28CU3 board ARM: dts: imx6qdl-wandboard: Provide phy-reset-gpios ARM: dts: imx6qdl-sabresd: Provide phy-reset-gpios ARM: dts: imx6q-sabrelite: Add ethernet phy reset pin into hog ARM: dts: imx6qdl: add pcie device node ARM: dts: imx6q-udoo: Add initial board support ARM: dts: mxs: Add muxing options for the SSP2 MMC ARM: dts: add initial VF610 Cosmic/Cosmic+ board support ... Signed-off-by:
-
Olof Johansson authored
Merge most of tag 'tags/exynos-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git into next/dt From Kukjin Kim, these are device-tree updates for Exynos. Among the changes: - add MIPI PHY node for exynos4 - update regulator for origen and exynos5250-arndale - add support HDMI for exynos5250, exynos5420 * commit '93457b9c': ARM: dts: Add HDMI related I2C nodes for Arndale board ARM: dts: enable hdmi subsystem for exynos5420 smdk board ARM: dts: add dt nodes for hdmi subsystem for exynos5420 ARM: dts: add i2c device nodes for Exynos5420 ARM: dts: add clocks to hdmi dt node for exynos5250 ARM: dts: add mixer clocks to mixer node for Exynos5250 of/documentation: update with clock information for exynos hdmi subsystem ARM: dts: Disable Exynos5250 I2S controllers by default ARM: dts: Add reg property to regulator nodes in exynos5250-arndale ARM: dts: Add fixed voltage regulator to simple bus for origen ARM: dts: Add MIPI PHY node to exynos4.dtsi
-
Olof Johansson authored
Merge tag 'ux500-dt-for-v3.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/dt From Linus Walleij: Five incremental device tree patches around the clock handling, and adding SSP/SPI devices to the device tree. * tag 'ux500-dt-for-v3.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: ARM: ux500: register all SSP and SPI blocks ARM: ux500: fix I2C4 clock bit ARM: ux500: fix clock for GPIO blocks 6 and 7 clk: ux500: fix erroneous bit assignment ARM: ux500: fix clock for GPIO block 8 Signed-off-by:
-
https://github.com/mripard/linuxOlof Johansson authored
From Maxime Ripard: Allwinner sunXi SoCs minor fixes for 3.13 * tag 'sunxi-fixes-for-3.13' of https://github.com/mripard/linux: ARM: sun6i: Fix the APB2 clock gates register size Signed-off-by:
-
https://github.com/mripard/linuxOlof Johansson authored
From Maxime Ripard: Allwinner sunXi SoCs device tree changes for 3.13 This DT series sees the introduction of the cubietruck DT, plus the addition of the i2c controller for the A20 based boards, and of the Security ID found in all the Allwinner SoCs but the A31. * tag 'sunxi-dt-for-3.13' of https://github.com/mripard/linux: ARM: sunxi: dts: Add support for the cubieboard3, the CubieTruck ARM: sun7i: olinuxino-micro: Enable the I2C controllers ARM: sun7i: cubieboard2: Enable the I2C controllers ARM: sun7i: Add the pin muxing options for the I2C controllers ARM: sun7i: Enable the I2C controllers ARM: sunxi: dt: Add sunxi-sid to dts for sun4i, sun5i and sun7i Signed-off-by:
-
- 23 Oct, 2013 20 commits
-
-
Ezequiel Garcia authored
The Armada 370/XP SoC has a clock provider called "Core Divider", that is derived from a fixed 2 GHz PLL clock. Reviewed-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by:
Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by:
Jason Cooper <jason@lakedaemon.net>
-
Ezequiel Garcia authored
Armada 370/XP SoCs have a 2 GHz fixed PLL that is used to feed other clocks. This commit adds a DT representation of this clock through a fixed-clock compatible node. Reviewed-by:
-
Ezequiel Garcia authored
The Armada 370/XP SoCs have a Core Divider clock providing several clocks. For now, only the NAND clock is supported. Reviewed-by:
-
Tony Lindgren authored
Merge tag 'for_3.13_super_late/dts_signed' of git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt into omap-for-v3.13/dt Add a lot of N900 nodes Add OPP table to OMAP5/DRA7 Add support for Newflow NanoBone board
-
Peter Ujfalusi authored
When the omap5-evm.dts file has been renamed to omap5-uevm.dts and the sEVM support got deprecated in favor of uEVM (or Panda5) the content was not validated. Panda5 does not have support for digital microphones so remove the pinmux section for it. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
Benoit Cousson <bcousson@baylibre.com>
-
Peter Ujfalusi authored
When the omap5-evm.dts file has been renamed to omap5-uevm.dts and the sEVM support got deprecated in favor of uEVM (or Panda5) the content was not validated. On uEVM the twl6040 reset GPIO is from gpio5_141 and not via gpio5_145, which was the case in sEVM. Signed-off-by:
-
Sebastian Reichel authored
Enable support for the power button. Signed-off-by:
Sebastian Reichel <sre@debian.org> Signed-off-by:
-
Sebastian Reichel authored
Add support for LP5523 device. Signed-off-by:
-
Sebastian Reichel authored
This patch adds support for Nokia N900 TLV320AIC3X chips. Signed-off-by:
-
Sebastian Reichel authored
Add RX51_LCD_RESET_GPIO pin mux information to display. Signed-off-by:
-
Sebastian Reichel authored
This patch adds supports for Nokia N900 NAND memory. Signed-off-by:
-
Sebastian Reichel authored
Add regulator names and voltage information to the Nokia N900 DTS file. Signed-off-by:
-
Sebastian Reichel authored
The twl4030.dtsi is missing some regulators. This patch adds the missing ones and orders the regulators alphabetically. Signed-off-by:
-
Sebastian Reichel authored
Add support for LP5523 device. Signed-off-by:
-
Sebastian Reichel authored
Add support for Nokia N900's vibrator. Signed-off-by:
-
Sebastian Reichel authored
Add device tree node for the GPIO keys provided by the N900 board. This is a simple conversion of the existing board code. Signed-off-by:
-
Sebastian Reichel authored
Add support for external SD card slot. Signed-off-by:
-
Sebastian Reichel authored
Add UART support to Nokia N900. Signed-off-by:
-
Sebastian Reichel authored
Fix the bus speed of i2c bus 2 and 3. Signed-off-by:
-
Sebastian Reichel authored
Add pin muxing support for the Nokia N900 i2c controllers. Signed-off-by:
-
- 22 Oct, 2013 12 commits
-
-
J Keerthy authored
Add DT OPP table for DRA7xx family of devices. This data is decoded by OF with of_init_opp_table() helper function. The data is based on DRA75x, DRA74x Data Manual revision F (Sept 2013). TODO: add OPP_HIGH after AVS-Class0 is functional NOTE: The voltage and frequency values work well only on NOM samples and it is mandatory to use ABB/AVS Class 0 support for all OPPs. Clock nodes are pending clock node alignment. [nm@ti.com: cleanups and rebase to latest] Signed-off-by:
Nishanth Menon <nm@ti.com> Signed-off-by:
J Keerthy <j-keerthy@ti.com> Signed-off-by:
-
J Keerthy authored
Add DT OPP table for OMAP54xx family of devices. This data is decoded by OF with of_init_opp_table() helper function. The data is based on OMAP543x ES2.0 DM Operating Condition Addendum Version 0.6(April 2013) NOTE: The voltage and frequency values work well only on NOM samples and are supposed to work properly only with ABB/AVS for ALL OPPs. TODO: Add SPEED BIN OPP after ABB and AVS support so the cpufreq works on all samples seamlessly. Clock node is pending alignment for clock dts conversion [nm@ti.com: sync to latest and fixes] Signed-off-by:
-
J Keerthy authored
regulator smps123 supply from Palmas PMIC powers CPU0 on DRA7 EVM. [nm@ti.com: rebase to latest] Signed-off-by:
-
Nishanth Menon authored
regulator smps123 supply from Palmas PMIC powers CPU0 on OMAP5uEVM. Based on a patch by J Keerthy <j-keerthy@ti.com> Signed-off-by:
-
Nishanth Menon authored
With OMAP3+ and AM33xx supported SoC having defined CPU device tree entries with operating-points and clock nodes defined, we can now use the SoC generic cpufreq-cpu0 driver by registering appropriate device. Cc: Benoit Cousson <bcousson@baylibre.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Nishanth Menon authored
AM335x, AM43xx, OMAP5 and DRA7 have missing late init hook. Introduce SoC specific hook with a call to OMAP2+ generic lateinit hook. This allows the generic late initializations such as cpufreq hooks to be active. Based on out-of-tree patches that need to be introduced in mainline, this introduction allows us to provide the foundation for further SoC specific features as they are developed. Cc: Benoit Cousson <bcousson@baylibre.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Nishanth Menon authored
OMAP3+ supports both device tree and non-device tree boot. Device tree bindings for OMAP3+ is supposed to be added via dts following: Documentation/devicetree/bindings/power/opp.txt Since we now have device tree entries for OMAP3+ cpu OPPs, The current code wrongly adds duplicate OPPs. So, dont register OPPs when booting using device tree. Signed-off-by:
-
Eric Witcher authored
Correct mcspi pin descriptions to match corresponding node name and add chip select number to be consistent with OMAP5 TRM. Signed-off-by:
Eric Witcher <ewitcher@mindspring.com> Signed-off-by:
-
Markus Pargmann authored
Control module is not usb specific. Changes the label to usb_ctrl_mod. Signed-off-by:
Markus Pargmann <mpa@pengutronix.de> Signed-off-by:
-
Mark Jackson authored
NanoBone Specification: ----------------------- CPU: TI AM335x Memory: 256MB DDR3 128MB NOR flash 128KB FRAM Ethernet: 2 x 10/100 connected to SMSC LAN8710 PHY USB: 1 x USB2.0 Type A I2C: 2Kbit EEPROM (Microchip 24AA02) RTC (Maxim DS1338) GPIO Expander (Microchip MCP23017) Expansion connector: 6 x UART 1 x MMC/SD 1 x USB2.0 Signed-off-by:
Mark Jackson <mpfj@newflow.co.uk> Reviewed-by:
Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by:
-
Tony Lindgren authored
Looks like omap3 is still relying on hwmod data for some basic device tree information. Let's add the information to omap3.dtsi so we can remove the related hwmod data once omap3 is DT only. Acked-by:
-
Tony Lindgren authored
Merge tag 'for_3.13_late/dts_signed' of git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt into omap-for-v3.13/dt Add i2c aliases Add McASP and audio support Add reset/idle on init bindings for OMAP Add more nodes for AM4272
-
