Skip to content

L
linux
Switch branch/tag
  1. 13 Apr, 2017 8 commits
  3. 12 Apr, 2017 6 commits
    • Rashmica Gupta's avatar
      powerpc/mm: Fix hash table dump when memory is not contiguous · 9e4114b3
      Rashmica Gupta authored 
      The current behaviour of the hash table dump assumes that memory is contiguous
and iterates from the start of memory to (start + size of memory). When memory
isn't physically contiguous, this doesn't work.

If memory exists at 0-5 GB and 6-10 GB then the current approach will check if
entries exist in the hash table from 0GB to 9GB. This patch changes the
behaviour to iterate over any holes up to the end of memory.

Fixes: 1515ab93 ("powerpc/mm: Dump hash table")
Signed-off-by: default avatarRashmica Gupta <rashmica.g@gmail.com>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      9e4114b3
    • Oliver O'Halloran's avatar
      powerpc/mm: Add physical address to Linux page table dump · aaa22952
      Oliver O'Halloran authored 
      The current page table dumper scans the Linux page tables and coalesces mappings
with adjacent virtual addresses and similar PTE flags. This behaviour is
somewhat broken when you consider the IOREMAP space where entirely unrelated
mappings will appear to be virtually contiguous. This patch modifies the range
coalescing so that only ranges that are both physically and virtually contiguous
are combined. This patch also adds to the dump output the physical address at
the start of each range.

Fixes: 8eb07b18 ("powerpc/mm: Dump linux pagetables")
Signed-off-by: default avatarOliver O'Halloran <oohall@gmail.com>
[mpe: Print the physicall address with 0x like the other addresses]
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      aaa22952
    • Oliver O'Halloran's avatar
      powerpc/mm: Fix missing _PAGE_NON_IDEMPOTENT in pgtable dump · 70538eaa
      Oliver O'Halloran authored 
      On Book3s we have two PTE flags used to mark cache-inhibited mappings:
_PAGE_TOLERANT and _PAGE_NON_IDEMPOTENT. Currently the kernel page table dumper
only looks at the generic _PAGE_NO_CACHE which is defined to be _PAGE_TOLERANT.
This patch modifies the dumper so both flags are shown in the dump.

Fixes: 8eb07b18 ("powerpc/mm: Dump linux pagetables")
Signed-off-by: default avatarOliver O'Halloran <oohall@gmail.com>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      70538eaa
    • Balbir Singh's avatar
      powerpc/tracing: Allow tracing of mmap syscalls · 9c355917
      Balbir Singh authored 
      Currently sys_mmap() and sys_mmap2() (32-bit only), are not visible to the
syscall tracing machinery. This means users are not able to see the execution of
mmap() syscalls using the syscall tracer.

Fix that by using SYSCALL_DEFINE6 for sys_mmap() and sys_mmap2() so that the
meta-data associated with these syscalls is visible to the syscall tracer.

A side-effect of this change is that the return type has changed from unsigned
long to long. However this should have no effect, the only code in the kernel
which uses the result of these syscalls is in the syscall return path, which is
written in asm and treats the result as unsigned regardless.

Example output:
  cat-3399  [001] ....   196.542410: sys_mmap(addr: 7fff922a0000, len: 20000, prot: 3, flags: 812, fd: 3, offset: 1b0000)
  cat-3399  [001] ....   196.542443: sys_mmap -> 0x7fff922a0000
  cat-3399  [001] ....   196.542668: sys_munmap(addr: 7fff922c0000, len: 6d2c)
  cat-3399  [001] ....   196.542677: sys_munmap -> 0x0
Signed-off-by: default avatarBalbir Singh <bsingharora@gmail.com>
[mpe: Massage change log, add detail on return type change]
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      9c355917
    • Michael Ellerman's avatar
      powerpc/mm: Fix swapper_pg_dir size on 64-bit hash w/64K pages · 03dfee6d
      Michael Ellerman authored 
      Recently in commit f6eedbba ("powerpc/mm/hash: Increase VA range to 128TB"),
we increased H_PGD_INDEX_SIZE to 15 when we're building with 64K pages. This
makes it larger than RADIX_PGD_INDEX_SIZE (13), which means the logic to
calculate MAX_PGD_INDEX_SIZE in book3s/64/pgtable.h is wrong.

The end result is that the PGD (Page Global Directory, ie top level page table)
of the kernel (aka. swapper_pg_dir), is too small.

This generally doesn't lead to a crash, as we don't use the full range in normal
operation. However if we try to dump the kernel pagetables we can trigger a
crash because we walk off the end of the pgd into other memory and eventually
try to dereference something bogus:

  $ cat /sys/kernel/debug/kernel_pagetables
  Unable to handle kernel paging request for data at address 0xe8fece0000000000
  Faulting instruction address: 0xc000000000072314
  cpu 0xc: Vector: 380 (Data SLB Access) at [c0000000daa13890]
      pc: c000000000072314: ptdump_show+0x164/0x430
      lr: c000000000072550: ptdump_show+0x3a0/0x430
     dar: e802cf0000000000
  seq_read+0xf8/0x560
  full_proxy_read+0x84/0xc0
  __vfs_read+0x6c/0x1d0
  vfs_read+0xbc/0x1b0
  SyS_read+0x6c/0x110
  system_call+0x38/0xfc

The root cause is that MAX_PGD_INDEX_SIZE isn't actually computed to be
the max of H_PGD_INDEX_SIZE or RADIX_PGD_INDEX_SIZE. To fix that move
the calculation into asm-offsets.c where we can do it easily using
max().

Fixes: f6eedbba ("powerpc/mm/hash: Increase VA range to 128TB")
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      03dfee6d
    • Michael Ellerman's avatar
      Merge branch 'topic/xive' (early part) into next · 3c19d5ad
      Michael Ellerman authored 
      This merges the arch part of the XIVE support, leaving the final commit
with the KVM specific pieces dangling on the branch for Paul to merge
via the kvm-ppc tree.
      3c19d5ad
  5. 10 Apr, 2017 19 commits
  7. 07 Apr, 2017 1 commit
    • Benjamin Herrenschmidt's avatar
      powerpc/smp: Remove migrate_irq() custom implementation · a978e139
      Benjamin Herrenschmidt authored 
      Some powerpc platforms use this to move IRQs away from a CPU being
unplugged. This function has several bugs such as not taking the right
locks or failing to NULL check pointers.

There's a new generic function doing exactly the same thing without all
the bugs, so let's use it instead.

mpe: The obvious place for the select of GENERIC_IRQ_MIGRATION is on
HOTPLUG_CPU, but that doesn't work. On some configs PM_SLEEP_SMP will
select HOTPLUG_CPU even though its dependencies are not met, which means
the select of GENERIC_IRQ_MIGRATION doesn't happen. That leads to the
build breaking. Fix it by moving the select of GENERIC_IRQ_MIGRATION to
SMP.
Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      a978e139
  9. 06 Apr, 2017 3 commits
  11. 04 Apr, 2017 3 commits
    • Matt Brown's avatar
      powerpc/powernv: Add OPAL exports attributes to sysfs · 11fe909d
      Matt Brown authored 
      New versions of OPAL have a device node /ibm,opal/firmware/exports, each
property of which describes a range of memory in OPAL that Linux might
want to export to userspace for debugging.

This patch adds a sysfs file under 'opal/exports' for each property
found there, and makes it read-only by root.
Signed-off-by: default avatarMatt Brown <matthew.brown.dev@gmail.com>
[mpe: Drop counting of props, rename to attr, free on sysfs error, c'log]
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      11fe909d
    • Sukadev Bhattiprolu's avatar
      powerpc/prom: Increase minimum RMA size to 512MB · 687da8fc
      Sukadev Bhattiprolu authored 
      When booting very large systems with a large initrd, we run out of
space early in boot for either RTAS or the flattened device tree (FDT).
Boot fails with messages like:

	Could not allocate memory for RTAS
or
	No memory for flatten_device_tree (no room)

Increasing the minimum RMA size to 512MB fixes the problem. This
should not have an impact on smaller LPARs (with 256MB memory),
as the firmware will cap the RMA to the memory assigned to the LPAR.

Fix is based on input/discussions with Michael Ellerman. Thanks to
Praveen K. Pandey for testing on a large system.
Reported-by: default avatarPraveen K. Pandey <preveen.pandey@in.ibm.com>
Signed-off-by: default avatarSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      687da8fc
    • Alistair Popple's avatar
      powerpc/powernv: Introduce address translation services for Nvlink2 · 1ab66d1f
      Alistair Popple authored 
      Nvlink2 supports address translation services (ATS) allowing devices
to request address translations from an mmu known as the nest MMU
which is setup to walk the CPU page tables.

To access this functionality certain firmware calls are required to
setup and manage hardware context tables in the nvlink processing unit
(NPU). The NPU also manages forwarding of TLB invalidates (known as
address translation shootdowns/ATSDs) to attached devices.

This patch exports several methods to allow device drivers to register
a process id (PASID/PID) in the hardware tables and to receive
notification of when a device should stop issuing address translation
requests (ATRs). It also adds a fault handler to allow device drivers
to demand fault pages in.
Signed-off-by: default avatarAlistair Popple <alistair@popple.id.au>
[mpe: Fix up comment formatting, use flush_tlb_mm()]
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      1ab66d1f
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7