- 29 May, 2020 1 commit
-
-
Daniel Vetter authored
For historical reasons it's called dev->num_crtcs, which is rather confusing ever since kms was added. But now we have a nice helper, so let's use it for better readability! Only code change is in atomic helpers: vblank support means that dev->irq_enabled must be set too. Another one of these quirky things ... But since it's implied we can simplify that check. Reviewed-by:
Thomas Zimmermann <tzimmermann@suse.de> Acked-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200527111134.1571781-1-daniel.vetter@ffwll.ch
-
- 27 May, 2020 10 commits
-
-
Ville Syrjälä authored
gma500 only uses mode->private_flags to convey the sdvo pixel multiplier from the encoder .mode_fixup() hook to the encoder .mode_set() hook. Those always seems get called as a pair so let's just stuff the pixel multiplier into the encoder itself as there are no state objects we could use in this non-atomic driver. Paves the way for nuking mode->private_flag. Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> CC: Sam Ravnborg <sam@ravnborg.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Emil Velikov <emil.l.velikov@gmail.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200428171940.19552-15-ville.syrjala@linux.intel.com
-
Ville Syrjälä authored
htotal*vtotal*vrefresh ~= clock. So just say "clock" when we mean it. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Ville Syrjälä authored
Reorganize drm_display_mode to eliminate all the holes. We'll put all the actual timings to the start of the struct and all the extra junk to the end. Gets the size down to 136 bytes on 64bit and 120 bytes on 32bit. With a bit more work we should be able to get this below the two cacheline mark even on 64bit. v2: Rebase due to DRM_MODE_TYPE_USERDEF comment change Reviewed-by:
Emil Velikov <emil.velikov@collabora.com> Signed-off-by:
-
Ville Syrjälä authored
Remove the pointless whole-function indentation. Also don't need to worry about negative values anymore since we switched everything to u16. Reviewed-by:
-
Ville Syrjälä authored
Store the timings (apart from the clock) as u16. The uapi mode struct already uses u16 for everything so using something bigger internally doesn't really help us. Reviewed-by:
-
Ville Syrjälä authored
The mode flags are direclty exposed in the uapi as u32. Use the same size type to store them internally. Reviewed-by:
-
Ville Syrjälä authored
We only have 7 bits defined for mode->type. Shrink the storage to u8. Reviewed-by:
-
Ville Syrjälä authored
Instead of supporting ~2000km wide displayes let's limit ourselves to ~65m. That seems plenty big enough to me. Even with EDID_QUIRK_DETAILED_IN_CM EDIDs seem to be limited to 10*0xfff which fits into the 16 bits. Reviewed-by:
-
Ville Syrjälä authored
The driver never sets mode->private_flags so copying it back and forth is entirely pointless. Stop doing it. Also drop private_flags from the tracepoint. Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Reviewed-by:
-
Ville Syrjälä authored
Get rid of mode->vrefresh and just calculate it on demand. Saves a bit of space and avoids the cached value getting out of sync with reality. Mostly done with cocci, with the following manual fixups: - Remove the now empty loop in drm_helper_probe_single_connector_modes() - Fix __MODE() macro in ch7006_mode.c - Fix DRM_MODE_ARG() macro in drm_modes.h - Remove leftover comment from samsung_s6d16d0_mode - Drop the TODO @@ @@ struct drm_display_mode { ... - int vrefresh; ... }; @@ identifier N; expression E; @@ struct drm_display_mode N = { - .vrefresh = E }; @@ identifier N; expression E; @@ struct drm_display_mode N[...] = { ..., { - .vrefresh = E } ,... }; @@ expression E; @@ { DRM_MODE(...), - .vrefresh = E, } @@ identifier M, R; @@ int drm_mode_vrefresh(const struct drm_display_mode *M) { ... - if (M->vrefresh > 0) - R = M->vrefresh; - else if (...) { ... } ... } @@ struct drm_display_mode *p; expression E; @@ ( - p->vrefresh = E; | - p->vrefresh + drm_mode_vrefresh(p) ) @@ struct drm_display_mode s; expression E; @@ ( - s.vrefresh = E; | - s.vrefresh + drm_mode_vrefresh(&s) ) @@ expression E; @@ - drm_mode_vrefresh(E) ? drm_mode_vrefresh(E) : drm_mode_vrefresh(E) + drm_mode_vrefresh(E) @find_substruct@ identifier X; identifier S; @@ struct X { ... struct drm_display_mode S; ... }; @@ identifier find_substruct.S; expression E; identifier I; @@ { .S = { - .vrefresh = E } } @@ identifier find_substruct.S; identifier find_substruct.X; expression E; identifier I; @@ struct X I[...] = { ..., .S = { - .vrefresh = E } ,... }; v2: Drop TODO v3: Rebase v4: Rebase Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@siol.net> Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: CK Hu <ck.hu@mediatek.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Jerry Han <hanxu5@huaqin.corp-partner.google.com> Cc: Icenowy Zheng <icenowy@aosc.io> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Stefan Mavrodiev <stefan@olimex.com> Cc: Robert Chiras <robert.chiras@nxp.com> Cc: "Guido Günther" <agx@sigxcpu.org> Cc: Purism Kernel Team <kernel@puri.sm> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: VMware Graphics <linux-graphics-maintainer@vmware.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: linux-amlogic@lists.infradead.org Cc: nouveau@lists.freedesktop.org Reviewed-by:Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
-
- 26 May, 2020 4 commits
-
-
Ville Syrjälä authored
The drrs code dereferences mode->vrefresh via some really long chain of structures/pointers. Couldn't get coccinelle to see through all that so let's add some local variables to help it. Reviewed-by:
-
Noralf Trønnes authored
This replaces drm_fb_swab16() with drm_fb_swab() supporting 16 and 32-bit. Also make pixel line caching optional. v2: - Bail out on cpp != 2 && 4 (Sam) Reviewed-by:
Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200509141619.32970-8-noralf@tronnes.org
-
Noralf Trønnes authored
Add a way for client to check the configuration before comitting. v2: - Fix docs (Sam) Reviewed-by:
-
Noralf Trønnes authored
Some drivers need explicit flushing of buffer changes, add a function that does that. v2: - Put all clip rect stuff inside if statement (Sam) Reviewed-by:
-
- 25 May, 2020 2 commits
-
-
James Hilliard authored
If the vc4 hdmi driver loads before the pixel clock is available we see a spurious "*ERROR* Failed to get pixel clock" error. Signed-off-by:
James Hilliard <james.hilliard1@gmail.com> Signed-off-by:
-
Colin Ian King authored
The variable ret is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
- 23 May, 2020 1 commit
-
-
Lyude Paul authored
On some architectures like ppc64le and aarch64, compiling with -Wformat=1 will throw the following warnings: In file included from drivers/gpu/drm/drm_vblank.c:33: drivers/gpu/drm/drm_vblank.c: In function 'drm_update_vblank_count': drivers/gpu/drm/drm_vblank.c:273:16: warning: format '%llu' expects argument of type 'long long unsigned int', but argument 4 has type 'long int' [-Wformat=] DRM_DEBUG_VBL("updating vblank count on crtc %u:" ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./include/drm/drm_print.h:407:22: note: in definition of macro 'DRM_DEBUG_VBL' drm_dbg(DRM_UT_VBL, fmt, ##__VA_ARGS__) ^~~ drivers/gpu/drm/drm_vblank.c:274:22: note: format string is defined here " current=%llu, diff=%u, hw=%u hw_last=%u\n", ~~~^ %lu So, fix that with a typecast. Signed-off-by:Lyude Paul <lyude@redhat.com> Co-developed-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
- 20 May, 2020 3 commits
-
-
Daniel Vetter authored
It's the default. Signed-off-by:
Michael J. Ruhl <michael.j.ruhl@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200511091142.208787-1-daniel.vetter@ffwll.ch
-
Chris Wilson authored
Some users want to pass NULL to drm_gem_object_put(), but those using __drm_gem_object_put() did not. Compromise, have both and let the compiler sort it out. drm_gem_fb_destroy() calls drm_gem_object_put() with NULL obj causing: [ 11.584209] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 11.584213] #PF: supervisor write access in kernel mode [ 11.584215] #PF: error_code(0x0002) - not-present page [ 11.584216] PGD 0 P4D 0 [ 11.584220] Oops: 0002 [#1] SMP NOPTI [ 11.584223] CPU: 7 PID: 1571 Comm: gnome-shell Tainted: G E 5.7.0-rc1-1-default+ #27 [ 11.584225] Hardware name: Micro-Star International Co., Ltd. MS-7A31/X370 XPOWER GAMING TITANIUM (MS-7A31), BIOS 1.MR 12/03/2019 [ 11.584237] RIP: 0010:drm_gem_fb_destroy+0x28/0x70 [drm_kms_helper] <snip> [ 11.584256] Call Trace: [ 11.584279] drm_mode_rmfb+0x189/0x1c0 [drm] [ 11.584299] ? drm_mode_rmfb+0x1c0/0x1c0 [drm] [ 11.584314] drm_ioctl_kernel+0xaa/0xf0 [drm] [ 11.584329] drm_ioctl+0x1ff/0x3b0 [drm] [ 11.584347] ? drm_mode_rmfb+0x1c0/0x1c0 [drm] [ 11.584421] amdgpu_drm_ioctl+0x49/0x80 [amdgpu] [ 11.584427] ksys_ioctl+0x87/0xc0 [ 11.584430] __x64_sys_ioctl+0x16/0x20 [ 11.584434] do_syscall_64+0x5f/0x240 [ 11.584438] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 11.584440] RIP: 0033:0x7f0ef80f7227 Reported-by:
Nirmoy Das <nirmoy.das@amd.com> Fixes: b5d25074 ("drm/gem: fold drm_gem_object_put_unlocked and __drm_gem_object_put()") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Nirmoy Das <nirmoy.das@amd.com> Cc: Emil Velikov <emil.velikov@collabora.com> Cc: Christian König <christian.koenig@amd.com>. Acked-by:
-
Daniel Vetter authored
Do it uncontionally, there's a separate peek function with dma_fence_is_signalled() which can be called from atomic context. v2: Consensus calls for an unconditional might_sleep (Chris, Christian) Full audit: - dma-fence.h: Uses MAX_SCHEDULE_TIMOUT, good chance this sleeps - dma-resv.c: Timeout always at least 1 - st-dma-fence.c: Save to sleep in testcases - amdgpu_cs.c: Both callers are for variants of the wait ioctl - amdgpu_device.c: Two callers in vram recover code, both right next to mutex_lock. - amdgpu_vm.c: Use in the vm_wait ioctl, next to _reserve/unreserve - remaining functions in amdgpu: All for test_ib implementations for various engines, caller for that looks all safe (debugfs, driver load, reset) - etnaviv: another wait ioctl - habanalabs: another wait ioctl - nouveau_fence.c: hardcoded 15*HZ ... glorious - nouveau_gem.c: hardcoded 2*HZ ... so not even super consistent, but this one does have a WARN_ON :-/ At least this one is only a fallback path for when kmalloc fails. Maybe this should be put onto some worker list instead, instead of a work per unamp ... - i915/selftests: Hardecoded HZ / 4 or HZ / 8 - i915/gt/selftests: Going up the callchain looks safe looking at nearby callers - i915/gt/intel_gt_requests.c. Wrapped in a mutex_lock - i915/gem_i915_gem_wait.c: The i915-version which is called instead for i915 fences already has a might_sleep() annotation, so all good Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: "VMware Graphics" <linux-graphics-maintainer@vmware.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Cc: linux-rdma@vger.kernel.org Cc: amd-gfx@lists.freedesktop.org Cc: intel-gfx@lists.freedesktop.org Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Christian König <christian.koenig@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
- 19 May, 2020 19 commits
-
-
Emil Velikov authored
Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200518083456.132248-1-emil.l.velikov@gmail.com
-
Emil Velikov authored
The question of "what process is this pid" keeps on popping up, so lets print the process name alongside the pid. Cc: Mauro Rossi <issor.oruam@gmail.com> Cc: Bob Beckett <bob.beckett@collabora.com> Cc: Pekka Paalanen <pekka.paalanen@collabora.co.uk> Signed-off-by:
-
Emil Velikov authored
As of last commit, all the drivers have been updated away from the _unlocked helper. As such we can now remove the transient #define. v2: keep sed and #define removal separate Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
-
Emil Velikov authored
Spelling out _unlocked for each and every driver is a annoying. Especially if we consider how many drivers, do not know (or need to) about the horror stories involving struct_mutex. Just drop the suffix. It makes the API cleaner. Done via the following script: __from=drm_gem_object_put_unlocked __to=drm_gem_object_put for __file in $(git grep --name-only $__from); do sed -i "s/$__from/$__to/g" $__file; done Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Acked-by:
-
Emil Velikov authored
Spelling out _unlocked for each and every driver is a annoying. Especially if we consider how many drivers, do not know (or need to) about the horror stories involving struct_mutex. Just drop the suffix. It makes the API cleaner. Done via the following script: __from=drm_gem_object_put_unlocked __to=drm_gem_object_put for __file in $(git grep --name-only $__from); do sed -i "s/$__from/$__to/g" $__file; done v2: - Rebase Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Cc: Haneen Mohammed <hamohammed.sa@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
-
Emil Velikov authored
Spelling out _unlocked for each and every driver is a annoying. Especially if we consider how many drivers, do not know (or need to) about the horror stories involving struct_mutex. Just drop the suffix. It makes the API cleaner. Done via the following script: __from=drm_gem_object_put_unlocked __to=drm_gem_object_put for __file in $(git grep --name-only $__from); do sed -i "s/$__from/$__to/g" $__file; done Cc: David Airlie <airlied@linux.ie> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
Gerd Hoffmann <kraxel@redhat.com> Acked-by:
-
Emil Velikov authored
Spelling out _unlocked for each and every driver is a annoying. Especially if we consider how many drivers, do not know (or need to) about the horror stories involving struct_mutex. Just drop the suffix. It makes the API cleaner. Done via the following script: __from=drm_gem_object_put_unlocked __to=drm_gem_object_put for __file in $(git grep --name-only $__from); do sed -i "s/$__from/$__to/g" $__file; done Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Emil Velikov <emil.velikov@collabora.com> Signed-off-by:
-
Emil Velikov authored
Spelling out _unlocked for each and every driver is a annoying. Especially if we consider how many drivers, do not know (or need to) about the horror stories involving struct_mutex. Just drop the suffix. It makes the API cleaner. Done via the following script: __from=drm_gem_object_put_unlocked __to=drm_gem_object_put for __file in $(git grep --name-only $__from); do sed -i "s/$__from/$__to/g" $__file; done Cc: Eric Anholt <eric@anholt.net> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
-
Emil Velikov authored
Spelling out _unlocked for each and every driver is a annoying. Especially if we consider how many drivers, do not know (or need to) about the horror stories involving struct_mutex. Just drop the suffix. It makes the API cleaner. Done via the following script: __from=drm_gem_object_put_unlocked __to=drm_gem_object_put for __file in $(git grep --name-only $__from); do sed -i "s/$__from/$__to/g" $__file; done Cc: Eric Anholt <eric@anholt.net> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
-
Emil Velikov authored
Spelling out _unlocked for each and every driver is a annoying. Especially if we consider how many drivers, do not know (or need to) about the horror stories involving struct_mutex. Just drop the suffix. It makes the API cleaner. Done via the following script: __from=drm_gem_object_put_unlocked __to=drm_gem_object_put for __file in $(git grep --name-only $__from); do sed -i "s/$__from/$__to/g" $__file; done Cc: Thierry Reding <thierry.reding@gmail.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
Thierry Reding <treding@nvidia.com> Acked-by:
-
Emil Velikov authored
Spelling out _unlocked for each and every driver is a annoying. Especially if we consider how many drivers, do not know (or need to) about the horror stories involving struct_mutex. Just drop the suffix. It makes the API cleaner. Done via the following script: __from=drm_gem_object_put_unlocked __to=drm_gem_object_put for __file in $(git grep --name-only $__from); do sed -i "s/$__from/$__to/g" $__file; done Cc: Sandy Huang <hjc@rock-chips.com> Cc: "Heiko Stübner" <heiko@sntech.de> Cc: David Airlie <airlied@linux.ie> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Acked-by:
-
Emil Velikov authored
Spelling out _unlocked for each and every driver is a annoying. Especially if we consider how many drivers, do not know (or need to) about the horror stories involving struct_mutex. Just drop the suffix. It makes the API cleaner. Done via the following script: __from=drm_gem_object_put_unlocked __to=drm_gem_object_put for __file in $(git grep --name-only $__from); do sed -i "s/$__from/$__to/g" $__file; done Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com> Signed-off-by:
-
Emil Velikov authored
Spelling out _unlocked for each and every driver is a annoying. Especially if we consider how many drivers, do not know (or need to) about the horror stories involving struct_mutex. Just drop the suffix. It makes the API cleaner. Done via the following script: __from=drm_gem_object_put_unlocked __to=drm_gem_object_put for __file in $(git grep --name-only $__from); do sed -i "s/$__from/$__to/g" $__file; done Cc: Dave Airlie <airlied@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: David Airlie <airlied@linux.ie> Signed-off-by:
-
Emil Velikov authored
Spelling out _unlocked for each and every driver is a annoying. Especially if we consider how many drivers, do not know (or need to) about the horror stories involving struct_mutex. Just drop the suffix. It makes the API cleaner. Done via the following script: __from=drm_gem_object_put_unlocked __to=drm_gem_object_put for __file in $(git grep --name-only $__from); do sed -i "s/$__from/$__to/g" $__file; done Cc: Rob Herring <robh@kernel.org> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Steven Price <steven.price@arm.com> Signed-off-by:
Steven Price <steven.price@arm.com> Acked-by:
-
Emil Velikov authored
Spelling out _unlocked for each and every driver is a annoying. Especially if we consider how many drivers, do not know (or need to) about the horror stories involving struct_mutex. Just drop the suffix. It makes the API cleaner. Done via the following script: __from=drm_gem_object_put_unlocked __to=drm_gem_object_put for __file in $(git grep --name-only $__from); do sed -i "s/$__from/$__to/g" $__file; done Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
-
Emil Velikov authored
Spelling out _unlocked for each and every driver is a annoying. Especially if we consider how many drivers, do not know (or need to) about the horror stories involving struct_mutex. Just drop the suffix. It makes the API cleaner. Done via the following script: __from=drm_gem_object_put_unlocked __to=drm_gem_object_put for __file in $(git grep --name-only $__from); do sed -i "s/$__from/$__to/g" $__file; done Cc: Ben Skeggs <bskeggs@redhat.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
-
Emil Velikov authored
Spelling out _unlocked for each and every driver is a annoying. Especially if we consider how many drivers, do not know (or need to) about the horror stories involving struct_mutex. Just drop the suffix. It makes the API cleaner. Done via the following script: __from=drm_gem_object_put_unlocked __to=drm_gem_object_put for __file in $(git grep --name-only $__from); do sed -i "s/$__from/$__to/g" $__file; done Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Signed-off-by:
-
Emil Velikov authored
Spelling out _unlocked for each and every driver is a annoying. Especially if we consider how many drivers, do not know (or need to) about the horror stories involving struct_mutex. Just drop the suffix. It makes the API cleaner. Done via the following script: __from=drm_gem_object_put_unlocked __to=drm_gem_object_put for __file in $(git grep --name-only $__from); do sed -i "s/$__from/$__to/g" $__file; done Cc: Dave Airlie <airlied@redhat.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
-
Emil Velikov authored
Spelling out _unlocked for each and every driver is a annoying. Especially if we consider how many drivers, do not know (or need to) about the horror stories involving struct_mutex. Just drop the suffix. It makes the API cleaner. Done via the following script: __from=drm_gem_object_put_unlocked __to=drm_gem_object_put for __file in $(git grep --name-only $__from); do sed -i "s/$__from/$__to/g" $__file; done Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: David Airlie <airlied@linux.ie> Signed-off-by:
Chun-Kuang Hu <chunkuang.hu@kernel.org> Acked-by:
-
