- 28 May, 2019 6 commits
-
-
Quentin Monnet authored
libbpf was recently made aware of the log_level attribute for programs, used to specify the level of information expected to be dumped by the verifier. Function bpf_prog_load_xattr() got support for this log_level parameter. But some applications using libbpf rely on another function to load programs, bpf_object__load(), which does accept any parameter for log level. Create an API function based on bpf_object__load(), but accepting an "attr" object as a parameter. Then add a log_level field to that object, so that applications calling the new bpf_object__load_xattr() can pick the desired log level. v3: - Rewrite commit log. v2: - We are in a new cycle, bump libbpf extraversion number. Signed-off-by:
Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net>
-
Quentin Monnet authored
libbpf has three levels of priority for output messages: warn, info, debug. By default, debug output is not printed to the console. Add a new "--debug" (short name: "-d") option to bpftool to print libbpf logs for all three levels. Internally, we simply use the function provided by libbpf to replace the default printing function by one that prints logs regardless of their level. v2: - Remove the possibility to select the log-levels to use (v1 offered a combination of "warn", "info" and "debug"). - Rename option and offer a short name: -d|--debug. - Add option description to all bpftool manual pages (instead of bpftool-prog.rst only), as all commands use libbpf. Signed-off-by:
-
Hariprasad Kelam authored
Fix below warning reported by coccicheck: /tools/lib/bpf/libbpf.c:3461:1-3: WARNING: PTR_ERR_OR_ZERO can be used Signed-off-by:
Hariprasad Kelam <hariprasad.kelam@gmail.com> Acked-by:
Yonghong Song <yhs@fb.com> Signed-off-by:
-
Chang-Hsien Tsai authored
Use fgets() as the while loop condition. Signed-off-by:
Chang-Hsien Tsai <luke.tw@gmail.com> Acked-by:
-
Yonghong Song authored
Commit 8b401f9e ("bpf: implement bpf_send_signal() helper") introduced bpf_send_signal() helper. If the context is nmi, the sending signal work needs to be deferred to irq_work. If the signal is invalid, the error will appear in irq_work and it won't be propagated to user. This patch did an early check in the helper itself to notify user invalid signal, as suggested by Daniel. Suggested-by:
-
Andrii Nakryiko authored
Auto-complete BTF IDs for `btf dump id` sub-command. List of possible BTF IDs is scavenged from loaded BPF programs that have associated BTFs, as there is currently no API in libbpf to fetch list of all BTFs in the system. Suggested-by:
Andrii Nakryiko <andriin@fb.com> Reviewed-by:
-
- 25 May, 2019 19 commits
-
-
Matteo Croce authored
This commit adds ibumad to .gitignore which is currently ommited from the ignore file. Signed-off-by:
Matteo Croce <mcroce@redhat.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org>
-
Alexei Starovoitov authored
Jiong Wang says: ==================== v9: - Split patch 5 in v8. make bpf uapi header file sync a separate patch. (Alexei) v8: - For stack slot read, mark them as REG_LIVE_READ64. (Alexei) - Change DEF_NOT_SUBREG from -1 to 0. (Alexei) - Rebased on top of latest bpf-next. v7: - Drop the first patch in v6, the one adding 32-bit return value and argument type. (Alexei) - Rename bpf_jit_hardware_zext to bpf_jit_needs_zext. (Alexei) - Use mov32 with imm == 1 to indicate it is zext. (Alexei) - JIT back-ends peephole next insn to optimize out unnecessary zext inserted by verifier. (Alexei) - Testing: + patch set tested (bpf selftest) on x64 host with llvm 9.0 no regression observed no both JIT and interpreter modes. + patch set tested (bpf selftest) on x32 host. By Yanqing Wang, thanks! no regression observed on both JIT and interpreter modes. + patch set tested (bpf selftest) on RV64 host with llvm 9.0, By Björn Töpel, thanks! no regression observed before and after this set with JIT_ALWAYS_ON. test_progs_32 also enabled as LLVM 9.0 is used by Björn. + cross compiled the other affected targets, arm, PowerPC, SPARC, S390. v6: - Fixed s390 kbuild test robot error. (kbuild) - Make comment style in backends patches more consistent. v5: - Adjusted several test_verifier helpers to make them works on hosts w and w/o hardware zext. (Naveen) - Make sure zext flag not set when verifier by-passed, for example, libtest_bpf.ko. (Naveen) - Conservatively mark bpf main return value as 64-bit. (Alexei) - Make sure read flag is either READ64 or READ32, not the mix of both. (Alexei) - Merged patch 1 and 2 in v4. (Alexei) - Fixed kbuild test robot warning on NFP. (kbuild) - Proposed new BPF_ZEXT insn to have optimal code-gen for various JIT back-ends. - Conservately set zext flags for patched-insn. - Fixed return value zext for helper function calls. - Also adjusted test_verifier scalability unit test to avoid triggerring too many insn patch which will hang computer. - re-tested on x86 host with llvm 9.0, no regression on test_verifier, test_progs, test_progs_32. - re-tested offload target (nfp), no regression on local testsuite. v4: - added the two missing fixes which addresses two Jakub's reviewes in v3. - rebase on top of bpf-next. v3: - remove redundant check in "propagate_liveness_reg". (Jakub) - add extra check in "mark_reg_read" to prune more search. (Jakub) - re-implemented "prog_flags" passing mechanism, removed use of global switch inside libbpf. - enabled high 32-bit randomization beyond "test_verifier" and "test_progs". Now it should have been enabled for all possible tests. Re-run all tests, haven't noticed regression. - remove RFC tag. v2: - rebased on top of bpf-next master. - added comments for what is sub-register def index. (Edward, Alexei) - removed patch 1 which turns bit mask from enum to macro. (Alexei) - removed sysctl/bpf_jit_32bit_opt. (Alexei) - merged sub-register def insn index into reg state. (Alexei) - change test methodology (Alexei): + instead of simple unit tests on x86_64 for which this optimization doesn't enabled due to there is hardware support, poison high 32-bit for whose def identified as safe to do so. this could let the correctness of this patch set checked when daily bpf selftest ran which delivers very stressful test on host machine like x86_64. + hi32 poisoning is gated by a new BPF_F_TEST_RND_HI32 prog flags. + BPF_F_TEST_RND_HI32 is enabled for all tests of "test_progs" and "test_verifier", the latter needs minor tweak on two unit tests, please see the patch for the change. + introduced a new global variable "libbpf_test_mode" into libbpf. once it is set to true, it will set BPF_F_TEST_RND_HI32 for all the later PROG_LOAD syscall, the goal is to easy the enable of hi32 poison on exsiting testsuite. we could also introduce new APIs, for example "bpf_prog_test_load", then use -Dbpf_prog_load=bpf_prog_test_load to migrate tests under test_progs, but there are several load APIs, and such new API need some change on struture like "struct bpf_prog_load_attr". + removed old unit tests. it is based on insn scan and requires quite a few test_verifier generic code change. given hi32 randomization could offer good test coverage, the unit tests doesn't add much extra test value. - enhanced register width check ("is_reg64") when record sub-register write, now, it returns more accurate width. - Re-run all tests under "test_progs" and "test_verifier" on x86_64, no regression. Fixed a couple of bugs exposed: 1. ctx field size transformation was not taken into account. 2. insn patch could cause lost of original aux data which is important for ctx field conversion. 3. return value for propagate_liveness was wrong and caused regression on processed insn number. 4. helper call arg wasn't handled properly that path prune may cause 64-bit read info in pruned path lost. - Re-run Cilium bpf prog for processed-insn-number benchmarking, no regression. v1: - Fixed the missing handling on callee-saved for bpf-to-bpf call, sub-register defs therefore moved to frame state. (Jakub Kicinski) - Removed redundant "cross_reg". (Jakub Kicinski) - Various coding styles & grammar fixes. (Jakub Kicinski, Quentin Monnet) eBPF ISA specification requires high 32-bit cleared when low 32-bit sub-register is written. This applies to destination register of ALU32 etc. JIT back-ends must guarantee this semantic when doing code-gen. x86_64 and AArch64 ISA has the same semantics, so the corresponding JIT back-end doesn't need to do extra work. However, 32-bit arches (arm, x86, nfp etc.) and some other 64-bit arches (PowerPC, SPARC etc) need to do explicit zero extension to meet this requirement, otherwise code like the following will fail. u64_value = (u64) u32_value ... other uses of u64_value This is because compiler could exploit the semantic described above and save those zero extensions for extending u32_value to u64_value, these JIT back-ends are expected to guarantee this through inserting extra zero extensions which however could be a significant increase on the code size. Some benchmarks show there could be ~40% sub-register writes out of total insns, meaning at least ~40% extra code-gen. One observation is these extra zero extensions are not always necessary. Take above code snippet for example, it is possible u32_value will never be casted into a u64, the value of high 32-bit of u32_value then could be ignored and extra zero extension could be eliminated. This patch implements this idea, insns defining sub-registers will be marked when the high 32-bit of the defined sub-register matters. For those unmarked insns, it is safe to eliminate high 32-bit clearnace for them. Algo ==== We could use insn scan based static analysis to tell whether one sub-register def doesn't need zero extension. However, using such static analysis, we must do conservative assumption at branching point where multiple uses could be introduced. So, for any sub-register def that is active at branching point, we need to mark it as needing zero extension. This could introducing quite a few false alarms, for example ~25% on Cilium bpf_lxc. It will be far better to use dynamic data-flow tracing which verifier fortunately already has and could be easily extend to serve the purpose of this patch set. - Split read flags into READ32 and READ64. - Record index of insn that does sub-register write. Keep the index inside reg state and update it during verifier insn walking. - A full register read on a sub-register marks its definition insn as needing zero extension on dst register. A new sub-register write overrides the old one. - When propagating read64 during path pruning, also mark any insn defining a sub-register that is read in the pruned path as full-register. Benchmark ========= - I estimate the JITed image could be 10% ~ 30% smaller on these affected arches (nfp, arm, x32, risv, ppc, sparc, s390), depending on the prog. - For Cilium bpf_lxc, there is ~11500 insns in the compiled binary (use latest LLVM snapshot, and with -mcpu=v3 -mattr=+alu32 enabled), 4460 of them has sub-register writes (~40%). Calculated by: cat dump | grep -P "\tw" | wc -l (ALU32) cat dump | grep -P "r.*=.*u32" | wc -l (READ_W) cat dump | grep -P "r.*=.*u16" | wc -l (READ_H) cat dump | grep -P "r.*=.*u8" | wc -l (READ_B) After this patch set enabled, > 25% of those 4460 could be identified as doesn't needing zero extension on the destination, and the percentage could go further up to more than 50% with some follow up optimizations based on the infrastructure offered by this set. This leads to significant save on JITed image. ==================== Signed-off-by: -
Jiong Wang authored
This patch eliminate zero extension code-gen for instructions including both alu and load/store. The only exception is for ctx load, because offload target doesn't go through host ctx convert logic so we do customized load and ignores zext flag set by verifier. Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Jiong Wang <jiong.wang@netronome.com> Signed-off-by:
-
Jiong Wang authored
Cc: Björn Töpel <bjorn.topel@gmail.com> Acked-by:
Björn Töpel <bjorn.topel@gmail.com> Tested-by:
-
Jiong Wang authored
Cc: Wang YanQing <udknight@gmail.com> Tested-by:
Wang YanQing <udknight@gmail.com> Signed-off-by:
-
Jiong Wang authored
Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
-
Jiong Wang authored
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Jiong Wang authored
Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com> Cc: Sandipan Das <sandipan@linux.ibm.com> Signed-off-by:
-
Jiong Wang authored
Cc: Shubham Bansal <illusionist.neo@gmail.com> Signed-off-by:
-
Jiong Wang authored
The previous libbpf patch allows user to specify "prog_flags" to bpf program load APIs. To enable high 32-bit randomization for a test, we need to set BPF_F_TEST_RND_HI32 in "prog_flags". To enable such randomization for all tests, we need to make sure all places are passing BPF_F_TEST_RND_HI32. Changing them one by one is not convenient, also, it would be better if a test could be switched to "normal" running mode without code change. Given the program load APIs used across bpf selftests are mostly: bpf_prog_load: load from file bpf_load_program: load from raw insns A test_stub.c is implemented for bpf seltests, it offers two functions for testing purpose: bpf_prog_test_load bpf_test_load_program The are the same as "bpf_prog_load" and "bpf_load_program", except they also set BPF_F_TEST_RND_HI32. Given *_xattr functions are the APIs to customize any "prog_flags", it makes little sense to put these two functions into libbpf. Then, the following CFLAGS are passed to compilations for host programs: -Dbpf_prog_load=bpf_prog_test_load -Dbpf_load_program=bpf_test_load_program They migrate the used load APIs to the test version, hence enable high 32-bit randomization for these tests without changing source code. Besides all these, there are several testcases are using "bpf_prog_load_attr" directly, their call sites are updated to pass BPF_F_TEST_RND_HI32. Signed-off-by:
-
Jiong Wang authored
- bpf_fill_ld_abs_vlan_push_pop: Prevent zext happens inside PUSH_CNT loop. This could happen because of BPF_LD_ABS (32-bit def) + BPF_JMP (64-bit use), or BPF_LD_ABS + EXIT (64-bit use of R0). So, change BPF_JMP to BPF_JMP32 and redefine R0 at exit path to cut off the data-flow from inside the loop. - bpf_fill_jump_around_ld_abs: Jump range is limited to 16 bit. every ld_abs is replaced by 6 insns, but on arches like arm, ppc etc, there will be one BPF_ZEXT inserted to extend the error value of the inlined ld_abs sequence which then contains 7 insns. so, set the dividend to 7 so the testcase could work on all arches. - bpf_fill_scale1/bpf_fill_scale2: Both contains ~1M BPF_ALU32_IMM which will trigger ~1M insn patcher call because of hi32 randomization later when BPF_F_TEST_RND_HI32 is set for bpf selftests. Insn patcher is not efficient that 1M call to it will hang computer. So , change to BPF_ALU64_IMM to avoid hi32 randomization. Signed-off-by: -
Jiong Wang authored
libbpf doesn't allow passing "prog_flags" during bpf program load in a couple of load related APIs, "bpf_load_program_xattr", "load_program" and "bpf_prog_load_xattr". It makes sense to allow passing "prog_flags" which is useful for customizing program loading. Reviewed-by:
-
Jiong Wang authored
This patch randomizes high 32-bit of a definition when BPF_F_TEST_RND_HI32 is set. Suggested-by:
-
Jiong Wang authored
Sync new bpf prog load flag "BPF_F_TEST_RND_HI32" to tools/. Signed-off-by:
-
Jiong Wang authored
x86_64 and AArch64 perhaps are two arches that running bpf testsuite frequently, however the zero extension insertion pass is not enabled for them because of their hardware support. It is critical to guarantee the pass correction as it is supposed to be enabled at default for a couple of other arches, for example PowerPC, SPARC, arm, NFP etc. Therefore, it would be very useful if there is a way to test this pass on for example x86_64. The test methodology employed by this set is "poisoning" useless bits. High 32-bit of a definition is randomized if it is identified as not used by any later insn. Such randomization is only enabled under testing mode which is gated by the new bpf prog load flags "BPF_F_TEST_RND_HI32". Suggested-by:
-
Jiong Wang authored
After previous patches, verifier will mark a insn if it really needs zero extension on dst_reg. It is then for back-ends to decide how to use such information to eliminate unnecessary zero extension code-gen during JIT compilation. One approach is verifier insert explicit zero extension for those insns that need zero extension in a generic way, JIT back-ends then do not generate zero extension for sub-register write at default. However, only those back-ends which do not have hardware zero extension want this optimization. Back-ends like x86_64 and AArch64 have hardware zero extension support that the insertion should be disabled. This patch introduces new target hook "bpf_jit_needs_zext" which returns false at default, meaning verifier zero extension insertion is disabled at default. A back-end could override this hook to return true if it doesn't have hardware support and want verifier insert zero extension explicitly. Offload targets do not use this native target hook, instead, they could get the optimization results using bpf_prog_offload_ops.finalize. NOTE: arches could have diversified features, it is possible for one arch to have hardware zero extension support for some sub-register write insns but not for all. For example, PowerPC, SPARC have zero extended loads, but not for alu32. So when verifier zero extension insertion enabled, these JIT back-ends need to peephole insns to remove those zero extension inserted for insn that actually has hardware zero extension support. The peephole could be as simple as looking the next insn, if it is a special zero extension insn then it is safe to eliminate it if the current insn has hardware zero extension support. Reviewed-by:
-
Jiong Wang authored
The encoding for this new variant is based on BPF_X format. "imm" field was 0 only, now it could be 1 which means doing zero extension unconditionally .code = BPF_ALU | BPF_MOV | BPF_X .dst_reg = DST .src_reg = SRC .imm = 1 We use this new form for doing zero extension for which verifier will guarantee SRC == DST. Implications on JIT back-ends when doing code-gen for BPF_ALU | BPF_MOV | BPF_X: 1. No change if hardware already does zero extension unconditionally for sub-register write. 2. Otherwise, when seeing imm == 1, just generate insns to clear high 32-bit. No need to generate insns for the move because when imm == 1, dst_reg is the same as src_reg at the moment. Interpreter doesn't need change as well. It is doing unconditionally zero extension for mov32 already. One helper macro BPF_ZEXT_REG is added to help creating zero extension insn using this new mov32 variant. One helper function insn_is_zext is added for checking one insn is an zero extension on dst. This will be widely used by a few JIT back-ends in later patches in this set. Signed-off-by: -
Jiong Wang authored
Patched insns do not go through generic verification, therefore doesn't has zero extension information collected during insn walking. We don't bother analyze them at the moment, for any sub-register def comes from them, just conservatively mark it as needing zero extension. Signed-off-by:
-
Jiong Wang authored
eBPF ISA specification requires high 32-bit cleared when low 32-bit sub-register is written. This applies to destination register of ALU32 etc. JIT back-ends must guarantee this semantic when doing code-gen. x86_64 and AArch64 ISA has the same semantics, so the corresponding JIT back-end doesn't need to do extra work. However, 32-bit arches (arm, x86, nfp etc.) and some other 64-bit arches (PowerPC, SPARC etc) need to do explicit zero extension to meet this requirement, otherwise code like the following will fail. u64_value = (u64) u32_value ... other uses of u64_value This is because compiler could exploit the semantic described above and save those zero extensions for extending u32_value to u64_value, these JIT back-ends are expected to guarantee this through inserting extra zero extensions which however could be a significant increase on the code size. Some benchmarks show there could be ~40% sub-register writes out of total insns, meaning at least ~40% extra code-gen. One observation is these extra zero extensions are not always necessary. Take above code snippet for example, it is possible u32_value will never be casted into a u64, the value of high 32-bit of u32_value then could be ignored and extra zero extension could be eliminated. This patch implements this idea, insns defining sub-registers will be marked when the high 32-bit of the defined sub-register matters. For those unmarked insns, it is safe to eliminate high 32-bit clearnace for them. Algo: - Split read flags into READ32 and READ64. - Record index of insn that does sub-register write. Keep the index inside reg state and update it during verifier insn walking. - A full register read on a sub-register marks its definition insn as needing zero extension on dst register. A new sub-register write overrides the old one. - When propagating read64 during path pruning, also mark any insn defining a sub-register that is read in the pruned path as full-register. Reviewed-by:
-
- 24 May, 2019 15 commits
-
-
Daniel Borkmann authored
Yonghong Song says: ==================== This patch tries to solve the following specific use case. Currently, bpf program can already collect stack traces through kernel function get_perf_callchain() when certain events happens (e.g., cache miss counter or cpu clock counter overflows). But such stack traces are not enough for jitted programs, e.g., hhvm (jited php). To get real stack trace, jit engine internal data structures need to be traversed in order to get the real user functions. bpf program itself may not be the best place to traverse the jit engine as the traversing logic could be complex and it is not a stable interface either. Instead, hhvm implements a signal handler, e.g. for SIGALARM, and a set of program locations which it can dump stack traces. When it receives a signal, it will dump the stack in next such program location. This patch implements bpf_send_signal() helper to send a signal to hhvm in real time, resulting in intended stack traces. Patch #1 implemented the bpf_send_helper() in the kernel. Patch #2 synced uapi header bpf.h to tools directory. Patch #3 added a self test which covers tracepoint and perf_event bpf programs. Changelogs: v4 => v5: . pass the "current" task struct to irq_work as well since the current task struct may change between nmi and subsequent irq_work_interrupt. Discovered by Daniel. v3 => v4: . fix one typo and declare "const char *id_path = ..." to avoid directly use the long string in the func body in Patch #3. v2 => v3: . change the standalone test to be part of prog_tests. RFC v1 => v2: . previous version allows to send signal to an arbitrary pid. This version just sends the signal to current task to avoid unstable pid and potential races between sending signals and task state changes for the pid. ==================== Signed-off-by: -
Yonghong Song authored
The test covered both nmi and tracepoint perf events. $ ./test_progs ... test_send_signal_tracepoint:PASS:tracepoint 0 nsec ... test_send_signal_common:PASS:tracepoint 0 nsec ... test_send_signal_common:PASS:perf_event 0 nsec ... test_send_signal:OK Acked-by:
-
Yonghong Song authored
The bpf uapi header include/uapi/linux/bpf.h is sync'ed to tools/include/uapi/linux/bpf.h. Acked-by:
-
Yonghong Song authored
This patch tries to solve the following specific use case. Currently, bpf program can already collect stack traces through kernel function get_perf_callchain() when certain events happens (e.g., cache miss counter or cpu clock counter overflows). But such stack traces are not enough for jitted programs, e.g., hhvm (jited php). To get real stack trace, jit engine internal data structures need to be traversed in order to get the real user functions. bpf program itself may not be the best place to traverse the jit engine as the traversing logic could be complex and it is not a stable interface either. Instead, hhvm implements a signal handler, e.g. for SIGALARM, and a set of program locations which it can dump stack traces. When it receives a signal, it will dump the stack in next such program location. Such a mechanism can be implemented in the following way: . a perf ring buffer is created between bpf program and tracing app. . once a particular event happens, bpf program writes to the ring buffer and the tracing app gets notified. . the tracing app sends a signal SIGALARM to the hhvm. But this method could have large delays and causing profiling results skewed. This patch implements bpf_send_signal() helper to send a signal to hhvm in real time, resulting in intended stack traces. Acked-by: -
Alexei Starovoitov authored
Andrii Nakryiko says: ==================== This patch set adds BTF-to-C dumping APIs to libbpf, allowing to output a subset of BTF types as a compilable C type definitions. This is useful by itself, as raw BTF output is not easy to inspect and comprehend. But it's also a big part of BPF CO-RE (compile once - run everywhere) initiative aimed at allowing to write relocatable BPF programs, that won't require on-the-host kernel headers (and would be able to inspect internal kernel structures, not exposed through kernel headers). This patch set consists of three groups of patches and one pre-patch, with the BTF-to-C dumper API depending on the first two groups. Pre-patch #1 fixes issue with libbpf_internal.h. btf__parse_elf() API patches: - patch #2 adds btf__parse_elf() API to libbpf, allowing to load BTF and/or BTF.ext from ELF file; - patch #3 utilizies btf__parse_elf() from bpftool for `btf dump file` command; - patch #4 switches test_btf.c to use btf__parse_elf() to check for presence of BTF data in object file. libbpf's internal hashmap patches: - patch #5 adds resizeable non-thread safe generic hashmap to libbpf; - patch #6 adds tests for that hashmap; - patch #7 migrates btf_dedup()'s dedup_table to use hashmap w/ APPEND. BTF-to-C dumper API patches: - patch #8 adds btf_dump APIs with all the logic for laying out type definitions in correct order and emitting C syntax for them; - patch #9 adds lots of tests for common and quirky parts of C type system; - patch #10 adds support for C-syntax btf dumping to bpftool; - patch #11 updates bpftool documentation to mention C-syntax dump option; - patch #12 update bash-completion for btf dump sub-command. v2->v3: - fix bpftool-btf.rst formatting (Quentin); - simplify bash autocompletion script (Quentin); - better error message in btf dump (Quentin); v1->v2: - removed unuseful file header (Jakub); - removed inlines in .c (Jakub); - added 'format {c|raw}' keyword/option (Jakub); - re-use i var for iteration in btf_dump_c() (Jakub); - bumped libbpf version to 0.0.4; v0->v1: - fix bug in hashmap__for_each_bucket_entry() not handling empty hashmap; - removed `btf dump`-specific libbpf logging hook up (Quentin has more generic patchset); - change btf__parse_elf() to always load .BTF and return it as a result, with .BTF.ext being optional and returned through struct btf_ext** arg (Alexei); - endianness check to use __BYTE_ORDER__ (Alexei); - bool:1 to __u8:1 in type_aux_state (Alexei); - added HASHMAP_APPEND strategy to hashmap, changed hashmap__for_each_key_entry() to also check for key equality during iteration (multimap iteration for key); - added new tests for empty hashmap and hashmap as a multimap; - tried to clarify weak/strong dependency ordering comments (Alexei) - btf dump test's expected output - support better commenting aproach (Alexei); - added bash-completion for a new "c" option (Alexei). ==================== Signed-off-by: -
Andrii Nakryiko authored
Add bash completion for new C btf dump option. Cc: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by:
-
Andrii Nakryiko authored
Document optional **c** option for btf dump subcommand. Cc: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by:
-
Andrii Nakryiko authored
Utilize new libbpf's btf_dump API to emit BTF as a C definitions. Acked-by:
-
Andrii Nakryiko authored
Add new test_btf_dump set of tests, validating BTF-to-C conversion correctness. Tests rely on clang to generate BTF from provided C test cases. Signed-off-by:
-
Andrii Nakryiko authored
BTF contains enough type information to allow generating valid compilable C header w/ correct layout of structs/unions and all the typedef/enum definitions. This patch adds a new "object" - btf_dump to facilitate dumping BTF as valid C. btf_dump__dump_type() is the main API which takes care of dumping out (through user-provided printf-like callback function) C definitions for given type ID and it's required dependencies. This allows for not just dumping out entirety of BTF types, but also selective filtering based on user-provided criterias w/ minimal set of dependent types. Signed-off-by:
-
Andrii Nakryiko authored
Utilize libbpf's hashmap as a multimap fof dedup_table implementation. Signed-off-by:
-
Andrii Nakryiko authored
Test all APIs for internal hashmap implementation. Signed-off-by:
-
Andrii Nakryiko authored
There is a need for fast point lookups inside libbpf for multiple use cases (e.g., name resolution for BTF-to-C conversion, by-name lookups in BTF for upcoming BPF CO-RE relocation support, etc). This patch implements simple resizable non-thread safe hashmap using single linked list chains. Four different insert strategies are supported: - HASHMAP_ADD - only add key/value if key doesn't exist yet; - HASHMAP_SET - add key/value pair if key doesn't exist yet; otherwise, update value; - HASHMAP_UPDATE - update value, if key already exists; otherwise, do nothing and return -ENOENT; - HASHMAP_APPEND - always add key/value pair, even if key already exists. This turns hashmap into a multimap by allowing multiple values to be associated with the same key. Most useful read API for such hashmap is hashmap__for_each_key_entry() iteration. If hashmap__find() is still used, it will return last inserted key/value entry (first in a bucket chain). For HASHMAP_SET and HASHMAP_UPDATE, old key/value pair is returned, so that calling code can handle proper memory management, if necessary. Signed-off-by:
-
Andrii Nakryiko authored
Switch test_btf.c to rely on btf__parse_elf to check presence of BTF and BTF.ext data, instead of implementing its own ELF parsing. Signed-off-by:
-
Andrii Nakryiko authored
Use btf__parse_elf() API, provided by libbpf, instead of implementing ELF parsing by itself. Signed-off-by:
-
