- 13 Sep, 2017 4 commits
-
-
Harinath Nampally authored
This driver supports multiple devices like mma8653, mma8652, mma8452, mma8453 and fxls8471. Almost all these devices have more than one event. Current driver design hardcodes the event specific information, so only one event can be supported by this driver at any given time. Also current design doesn't have the flexibility to add more events. This patch improves by detaching the event related information from chip_info struct,and based on channel type and event direction the corresponding event configuration registers are picked dynamically. Hence both transient and freefall events can be handled in read/write callbacks. Changes are thoroughly tested on fxls8471 device on imx6UL Eval board using iio_event_monitor user space program. After this fix both Freefall and Transient events are handled by the driver without any conflicts. Signed-off-by:Harinath Nampally <harinath922@gmail.com> Reviewed-by:
Martin Kepplinger <martink@posteo.de> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Lukas Wunner authored
The Texas Instruments DAC7512 has the exact same pinout, programming interface and power-down modes as the Texas Instruments DAC121S101 and Analog Devices AD5320, which are already supported by the IIO driver ad5446.c. Remove the duplicate misc driver. This requires user space to migrate to the standardized IIO sysfs ABI. (In other words, it needs to change a filename.) The IIO driver supports the chip's features more fully, e.g. the ability to power down the output or choose one of the available powerdown modes. There is an oddity with the misc driver in that it initializes the SPI slave to SPI_MODE_0, in contradiction to the datasheet which specifies that data is latched in on the falling edge, implying that SPI_MODE_1 or SPI_MODE_2 must be used. Another oddity is that Kconfig and the MODULE_DESCRIPTION() claim the chip has 16-bit resolution although it actually has 12-bit. Datasheets: http://www.ti.com/lit/ds/symlink/dac7512.pdf http://www.ti.com/lit/ds/symlink/dac121s101.pdf http://www.analog.com/media/en/technical-documentation/data-sheets/AD5320.pdfSigned-off-by:
Lukas Wunner <lukas@wunner.de> Acked-by:
Daniel Mack <daniel@zonque.org> Acked-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Lukas Wunner authored
The Texas Instruments DAC081S101, DAC101S101 and DAC121S101 have the exact same pinout, programming interface and power-down modes as the AD5300, AD5310 and AD5320, respectively, and their datasheets declare them "a direct replacement" for the Analog Devices chips. This may not be immediately obvious to a casual observer, so add them to the supported modalias strings. Datasheets: http://www.ti.com/lit/ds/symlink/dac081s101.pdf http://www.ti.com/lit/ds/symlink/dac101s101.pdf http://www.ti.com/lit/ds/symlink/dac121s101.pdf http://www.analog.com/media/en/technical-documentation/data-sheets/AD5300.pdf http://www.analog.com/media/en/technical-documentation/data-sheets/AD5310.pdf http://www.analog.com/media/en/technical-documentation/data-sheets/AD5320.pdfSigned-off-by:
-
Lorenzo Bianconi authored
Signed-off-by:
Lorenzo Bianconi <lorenzo.bianconi@st.com> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
- 03 Sep, 2017 16 commits
-
-
Lorenzo Bianconi authored
add support to STMicroelectronics LPS33HW and LPS35HW pressure sensors to st_pressure framework http://www.st.com/resource/en/datasheet/lps33hw.pdf http://www.st.com/resource/en/datasheet/lps35hw.pdfSigned-off-by:
-
Colin Ian King authored
Don't populate the arrays on the stack, instead make them static. Makes the object code smaller by 135 bytes: Before: text data bss dec hex filename 15135 4240 128 19503 4c2f inv_mpu_core.o After: text data bss dec hex filename 14840 4400 128 19368 4ba8 inv_mpu_core.o Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Ladislav Michl authored
As user's guide "ADS1015EVM, ADS1115EVM, ADS1015EVM-PDK, ADS1115EVM-PDK User Guide (Rev. B)" (http://www.ti.com/lit/ug/sbau157b/sbau157b.pdf) states at page 16: "Note that both the ADS1115 and ADS1015 have internal clocks with a ±10% accuracy. If performing FFT tests, frequencies may appear to be incorrect as a result of this tolerance range.", add those 10% to converion wait time. Cc: Daniel Baluta <daniel.baluta@gmail.com> Cc: Jonathan Cameron <jic23@kernel.org> Signed-off-by:
Ladislav Michl <ladis@linux-mips.org> Reviewed-by:
Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by:
-
Ladislav Michl authored
There is no point writing ADS1015_CFG_REG when configuration didn't change. Avoid that. Cc: Daniel Baluta <daniel.baluta@gmail.com> Cc: Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Gustavo A. R. Silva authored
Add missing break statement to prevent the code for case IIO_CHAN_INFO_CALIBBIAS falling through to the default case. Also, add a break to the default case for the switch within case IIO_CHAN_INFO_CALIBBIAS. Addresses-Coverity-ID: 1357377 Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Gustavo A. R. Silva authored
Check return values from call to devm_kzalloc() and devm_kmemup() in order to prevent a NULL pointer dereference. This issue was detected using Coccinelle and the following semantic patch: @@ expression x; identifier fld; @@ * x = devm_kzalloc(...); ... when != x == NULL x->fld Fixes: 7ba9df54 ("iio: multiplexer: new iio category and iio-mux driver") Signed-off-by:
Gustavo A. R. Silva <garsilva@embeddedor.com> Acked-by:
Peter Rosin <peda@axentia.se> Signed-off-by:
-
Akinobu Mita authored
The TCS3472 device provides interrupt signal for out-of-threshold events with persistence filter. This change adds interrupt support for the threshold events and enables to configure the period of time by persistence filter. Cc: Peter Meerwald <pmeerw@pmeerw.net> Cc: Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Arvind Yadav authored
i2c_device_id are not supposed to change at runtime. All functions working with i2c_device_id provided by <linux/i2c.h> work with const i2c_device_id. So mark the non-const structs as const. Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
-
Jonathan Cameron authored
These docs need to be cleaned up properly, but for now lets drop this entry as it is definitely no longer true. Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de>
-
Jonathan Cameron authored
Whilst these docs have lots of other flaws, this element is definitely no longer true. Signed-off-by:
-
Jonathan Cameron authored
The SPI core has handled this for some time. Signed-off-by:
-
Jonathan Cameron authored
This has been handled by the spi core for some time. Signed-off-by:
-
Jonathan Cameron authored
This has been handled by the spi core for some time now. Signed-off-by:
-
Jonathan Cameron authored
This has been handled by the i2c core for some time. Signed-off-by:
-
Jonathan Cameron authored
The equivalents are now assigned automatically in the relevant registration calls and so are not needed in these operations structures. Signed-off-by:
-
Jonathan Cameron authored
This is now done through some macro magic by the core. Signed-off-by:
-
- 22 Aug, 2017 20 commits
-
-
Jonathan Cameron authored
This is now handled by use of a macro for device registration. The field in iio_info will be going away shortly as it is no longer used. Cc: <platform-driver-x86@vger.kernel.org> Signed-off-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by:
Azael Avalos <coproscefalo@gmail.com> Reviewed-by:
-
Jonathan Cameron authored
This is now handled via some macro magic during the register. The field in iio_info will be removed shortly. Cc: Linux Input <linux-input@vger.kernel.org> Acked-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by:
-
Jonathan Cameron authored
The equivalent is now done via macro magic in the register call. Note this is the only case not found by the coccinelle script suggesting that perhaps that script needs to be a little more clever! Signed-off-by:
-
Jonathan Cameron authored
The equivalent of this is now done via macro magic when the relevant register call is made. The actual structure elements will shortly go away. Signed-off-by:
-
Jonathan Cameron authored
The equivalent is now done via macro magic when the relevant register call is made. The actual structure elements will shortly go away. Signed-off-by:
-
Jonathan Cameron authored
The equivalent of both of these are now done via macro magic when the relevant register calls are made. The actual structure elements will shortly go away. Signed-off-by:
-
Jonathan Cameron authored
The equivalent of this is now done via macro magic when the relevant register call is made. The actual structure elements will shortly go away. Signed-off-by:
-
Jonathan Cameron authored
The equivalent of this is now done via macro magic when the relevant register call is made. The actual structure elements will shortly go away. Signed-off-by:
-
Jonathan Cameron authored
The equivalent of this is now done via macro magic when the relevant register call is made. The actual structure elements will shortly go away. Signed-off-by:
-
Jonathan Cameron authored
The equivalent of this is now done via macro magic when the relevant register call is made. The actual structure elements will shortly go away. Signed-off-by:
-
Jonathan Cameron authored
The equivalent of this is now done via macro magic when the relevant register call is made. The actual structure element will shortly go away. Signed-off-by:
-
Jonathan Cameron authored
The equivalent this is now done via macro magic when the relevant register call is made. The actual structure elements will shortly go away. Signed-off-by:
-
Jonathan Cameron authored
The equivalent of both of these are now done via macro magic when the relevant register calls are made. The actual structure elements will shortly go away. Note that stm32-timer-trigger has expanded rather beyond triggers (to include encoder input counting for example) and hence has an iio_info structure. Signed-off-by:
-
Jonathan Cameron authored
The equivalent of this is now done via macro magic when the relevant register call is made. The actual structure elements will shortly go away. Signed-off-by:
-
Jonathan Cameron authored
The equivalent of both of these are now done via macro magic when the relevant register calls are made. The actual structure elements will shortly go away. Signed-off-by:
-
Jonathan Cameron authored
The equivalent of both of these are now done via macro magic when the relevant register calls are made. The actual structure elements will shortly go away. Signed-off-by:
-
Jonathan Cameron authored
The equivalent of both of these are now done via macro magic when the relevant register calls are made. The actual structure elements will shortly go away. Signed-off-by:
-
Jonathan Cameron authored
The equivalent of this is now done via macro magic when the relevant register call is made. The actual structure elements will shortly go away. Signed-off-by:
-
Jonathan Cameron authored
The equivalent of this is now done via macro magic when the relevant register call is made. The actual structure elements will shortly go away. Signed-off-by:
-
Jonathan Cameron authored
The equivalent of both of these are now done via macro magic when the relevant register calls are made. The actual structure elements will shortly go away. Signed-off-by:
-
