- 29 Jul, 2020 23 commits
-
-
Cong Wang authored
When red_init() fails, red_destroy() is called to clean up. If the timer is not initialized yet, del_timer_sync() will complain. So we have to move timer_setup() before any failure. Reported-and-tested-by: syzbot+6e95a4fabf88dc217145@syzkaller.appspotmail.com Fixes: aee9caa0 ("net: sched: sch_red: Add qevents "early_drop" and "mark"") Cc: Petr Machata <petrm@mellanox.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Luo bin says: ==================== hinic: add some error messages for debug patch #1: support to handle hw abnormal event patch #2: improve the error messages when functions return failure and dump relevant registers in some exception handling processes ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Luo bin authored
improve the error message when functions return failure and dump relevant registers in some exception handling processes Signed-off-by: Luo bin <luobin9@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Luo bin authored
add support to handle hw abnormal event such as hardware failure, cable unplugged,link error Signed-off-by: Luo bin <luobin9@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jacob Keller says: ==================== introduce PLDM firmware update library This series goal is to enable support for updating the ice hardware flash using the devlink flash command. The ice firmware update files are distributed using the file format described by the "PLDM for Firmware Update" standard: https://www.dmtf.org/documents/pmci/pldm-firmware-update-specification-100 Because this file format is standard, this series introduces a new library that handles the generic logic for parsing the PLDM file header. The library uses a design that is very similar to the Mellanox mlxfw module. That is, a simple ops table is setup and device drivers instantiate an instance of the pldmfw library with the device specific operations. Doing so allows for each device to implement the low level behavior for how to interact with its firmware. This series includes the library and an implementation for the ice hardware. I've removed all of the parameters, and the proposed changes to support overwrite mode. I'll be working on the overwrite mask suggestion from Jakub as a follow-up series. Because the PLDM file format is a standard and not something that is specific to the Intel hardware, I opted to place this update library in lib/pldmfw. I should note that while I tried to make the library generic, it does not attempt to mimic the complete "Update Agent" as defined in the standard. This is mostly due to the fact that the actual interfaces exposed to software for the ice hardware would not allow this. This series depends on some work just recently and is based on top of the patch series sent by Tony published at: https://lore.kernel.org/netdev/20200723234720.1547308-1-anthony.l.nguyen@intel.com/T/#t Changes since v2 RFC * Removed overwrite mode patches, as this can become a follow up series with a separate discussion * Fixed a minor bug in the pldm_timestamp structure not being packed. * Dropped Cc for other driver maintainers, as this series no longer includes changes to the core flash update command. * Re-ordered patches slightly. Changes since v1 RFC * Removed the "allow_downgrade_on_flash_update" parameter. Instead, the driver will always attempt to flash the device, even when firmware indicates that it would be a downgrade. A dev_warn is used to indicate when this occurs. * Removed the "ignore_pending_flash_update". Instead, the driver will always check for and cancel any previous pending update. A devlink flash status message will be sent when this cancellation occurs. * Removed the "reset_after_flash_update" parameter. This will instead be implemented as part of a devlink reset interface, work left for a future change. * Replaced the "flash_update_preservation_level" parameter with a new "overwrite" mode attribute on the flash update command. For ice, this mode will select the preservation level. For all other drivers, I modified them to check that the mode is "OVERWRITE_NOTHING", and have Cc'd the maintainers to get their input. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jacob Keller authored
Use the newly added pldmfw library to implement device flash update for the Intel ice networking device driver. This support uses the devlink flash update interface. The main parts of the flash include the Option ROM, the netlist module, and the main NVM data. The PLDM firmware file contains modules for each of these components. Using the pldmfw library, the provided firmware file will be scanned for the three major components, "fw.undi" for the Option ROM, "fw.mgmt" for the main NVM module containing the primary device firmware, and "fw.netlist" containing the netlist module. The flash is separated into two banks, the active bank containing the running firmware, and the inactive bank which we use for update. Each module is updated in a staged process. First, the inactive bank is erased, preparing the device for update. Second, the contents of the component are copied to the inactive portion of the flash. After all components are updated, the driver signals the device to switch the active bank during the next EMP reset (which would usually occur during the next reboot). Although the firmware AdminQ interface does report an immediate status for each command, the NVM erase and NVM write commands receive status asynchronously. The driver must not continue writing until previous erase and write commands have finished. The real status of the NVM commands is returned over the receive AdminQ. Implement a simple interface that uses a wait queue so that the main update thread can sleep until the completion status is reported by firmware. For erasing the inactive banks, this can take quite a while in practice. To help visualize the process to the devlink application and other applications based on the devlink netlink interface, status is reported via the devlink_flash_update_status_notify. While we do report status after each 4k block when writing, there is no real status we can report during erasing. We simply must wait for the complete module erasure to finish. With this implementation, basic flash update for the ice hardware is supported. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jacob Keller authored
After a flash update, the pending status of the update can be determined from the device capabilities. Read the appropriate device capability and store whether there is a pending update awaiting a reboot. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Cudzilo, Szymon T authored
Add structures, identifiers, and helper functions for several AdminQ commands related to performing a firmware update for the ice hardware. These will be used in future code for implementing the devlink .flash_update handler. Signed-off-by: Cudzilo, Szymon T <szymon.t.cudzilo@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jacek Naczyk authored
Extends function parsing response from Discover Device Capability AQC to check if the device supports unified NVM update flow. Signed-off-by: Jacek Naczyk <jacek.naczyk@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jacob Keller authored
The pldmfw library is used to implement common logic needed to flash devices based on firmware files using the format described by the PLDM for Firmware Update standard. This library consists of logic to parse the PLDM file format from a firmware file object, as well as common logic for sending the relevant PLDM header data to the device firmware. A simple ops table is provided so that device drivers can implement device specific hardware interactions while keeping the common logic to the pldmfw library. This library will be used by the Intel ice networking driver as part of implementing device flash update via devlink. The library aims to be vendor and device agnostic. For this reason, it has been placed in lib/pldmfw, in the hopes that other devices which use the PLDM firmware file format may benefit from it in the future. However, do note that not all features defined in the PLDM standard have been implemented. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Mat Martineau says: ==================== mptcp: Exchange MPTCP DATA_FIN/DATA_ACK before TCP FIN This series allows the MPTCP-level connection to be closed with the peers exchanging DATA_FIN and DATA_ACK according to the state machine in appendix D of RFC 8684. The process is very similar to the TCP disconnect state machine. The prior code sends DATA_FIN only when TCP FIN packets are sent, and does not allow for the MPTCP-level connection to be half-closed. Patch 8 ("mptcp: Use full MPTCP-level disconnect state machine") is the core of the series. Earlier patches in the series have some small fixes and helpers in preparation, and the final four small patches do some cleanup. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mat Martineau authored
The MPTCP socket's write_seq member can be read without the msk lock held, so use WRITE_ONCE() to store it. Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mat Martineau authored
The MPTCP socket's write_seq member should be read with READ_ONCE() when the msk lock is not held. Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mat Martineau authored
Bare TCP ack skbs are freed right after MPTCP sees them, so the work to allocate, zero, and populate the MPTCP skb extension is wasted. Detect these skbs and do not add skb extensions to them. Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mat Martineau authored
The MPTCP state machine handles disconnections on non-fallback connections, but the mptcp_sock still needs to get notified when fallback subflows disconnect. Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mat Martineau authored
RFC 8684 appendix D describes the connection state machine for MPTCP. This patch implements the DATA_FIN / DATA_ACK exchanges and MPTCP-level socket state changes described in that appendix, rather than simply sending DATA_FIN along with TCP FIN when disconnecting subflows. DATA_FIN is now sent and acknowledged before shutting down the subflows. Received DATA_FIN information (if not part of a data packet) is written to the MPTCP socket when the incoming DSS option is parsed by the subflow, and the MPTCP worker is scheduled to process the flag. DATA_FIN received as part of a full DSS mapping will be handled when the mapping is processed. The DATA_FIN is acknowledged by the worker if the reader is caught up. If there is still data to be moved to the MPTCP-level queue, ack_seq will be incremented to account for the DATA_FIN when it reaches the end of the stream and a DATA_ACK will be sent to the peer. Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mat Martineau authored
After DATA_FIN has been sent, the peer will acknowledge it. An ack of the relevant MPTCP-level sequence number will update the MPTCP connection state appropriately. Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mat Martineau authored
This will be used to transition to the appropriate state on close and determine if a DATA_FIN needs to be sent for that state transition. Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mat Martineau authored
Incoming DATA_FIN headers need to propagate the presence of the DATA_FIN bit and the associated sequence number to the MPTCP layer, even when arriving on a bare ACK that does not get added to the receive queue. Add structure members to store the DATA_FIN information and helpers to set and check those values. Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mat Martineau authored
Since DATA_FIN information is the same for every subflow, store it only in the mptcp_sock. Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mat Martineau authored
mptcp_close() acquires the msk lock, so it clearly should not be held before the function is called. Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mat Martineau authored
A MPTCP socket where sending has been shut down should not attempt to send additional data, since DATA_FIN has already been sent. Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mat Martineau authored
RFC 8684-compliant DATA_FIN needs to be sent and ack'd before subflows are closed with TCP FIN, so write DATA_FIN DSS headers whenever their transmission has been enabled by the MPTCP connection-level socket. Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 28 Jul, 2020 17 commits
-
-
David S. Miller authored
Christoph Hellwig says: ==================== sockptr_t fixes v2 a bunch of fixes for the sockptr_t conversion Changes since v1: - fix a user pointer dereference braino in bpfilter ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christoph Hellwig authored
Make sure not just the pointer itself but the whole range lies in the user address space. For that pass the length and then use the access_ok helper to do the check. Fixes: 6d04fe15 ("net: optimize the sockptr_t for unified kernel/user address spaces") Reported-by: David Laight <David.Laight@ACULAB.COM> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christoph Hellwig authored
sockptr_advance never properly worked. Replace it with _offset variants of copy_from_sockptr and copy_to_sockptr. Fixes: ba423fda ("net: add a new sockptr_t type") Reported-by: Jason A. Donenfeld <Jason@zx2c4.com> Reported-by: Ido Schimmel <idosch@idosch.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Jason A. Donenfeld <Jason@zx2c4.com> Tested-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christoph Hellwig authored
While the kernel in general is not strict aliasing safe we can trivially do that in sockptr_is_null without affecting code generation, so always check the actually assigned union member. Reported-by: Jan Engelhardt <jengelh@inai.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christoph Hellwig authored
This was accidentally removed in an unrelated commit. Fixes: c2f12630 ("netfilter: switch nf_setsockopt to sockptr_t") Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: Add support for QSFP-DD transceiver type This patch set from Vadim adds support for Quad Small Form Factor Pluggable Double Density (QSFP-DD) modules in mlxsw. Patch #1 enables dumping of QSFP-DD module information through ethtool. Patch #2 enables reading of temperature thresholds from QSFP-DD modules for hwmon and thermal zone purposes. Changes since v1 [1]: Only rebase on top of net-next. After discussing with Andrew and Adrian we agreed that current approach is OK and that in the future we can follow Andrew's suggestion to "make a new API where user space can request any pages it want, and specify the size of the page". This should allow us "to work around known issues when manufactures get their EEPROM wrong". [1] https://lore.kernel.org/netdev/20200626144724.224372-1-idosch@idosch.org/#t ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vadim Pasternak authored
Allow QSFP-DD transceivers temperature thresholds reading for hardware monitoring and thermal control. For this type, the thresholds are located in page 02h according to the "Module and Lane Thresholds" description from Common Management Interface Specification. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vadim Pasternak authored
The Quad Small Form Factor Pluggable Double Density (QSFP-DD) hardware specification defines a form factor that supports up to 400 Gbps in aggregate over an 8x50-Gbps electrical interface. The QSFP-DD supports both optical and copper interfaces. Implementation is based on Common Management Interface Specification; Rev 4.0 May 8, 2019. Table 8-2 "Identifier and Status Summary (Lower Page)" from this spec defines "Id and Status" fields located at offsets 00h - 02h. Bit 2 at offset 02h ("Flat_mem") specifies QSFP EEPROM memory mode, which could be "upper memory flat" or "paged". Flat memory mode is coded "1", and indicates that only page 00h is implemented in EEPROM. Paged memory is coded "0" and indicates that pages 00h, 01h, 02h, 10h and 11h are implemented. Pages 10h and 11h are currently not supported by the driver. "Flat" memory mode is used for the passive copper transceivers. For this type only page 00h (256 bytes) is available. "Paged" memory is used for the optical transceivers. For this type pages 00h (256 bytes), 01h (128 bytes) and 02h (128 bytes) are available. Upper page 01h contains static advertising field, while upper page 02h contains the module-defined thresholds and lane-specific monitors. Extend enumerator 'mlxsw_reg_mcia_eeprom_module_info_id' with additional field 'MLXSW_REG_MCIA_EEPROM_MODULE_INFO_TYPE_ID'. This field is used to indicate for QSFP-DD transceiver type which memory mode is to be used. Expose 256 bytes buffer for QSFP-DD passive copper transceiver and 512 bytes buffer for optical. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== mlx5-updates-2020-07-28 Misc and small update to mlx5 driver: 1) Aya adds PCIe relaxed ordering support for mlx5 netdev queues. 2) Eran Refactors pages data base to be per vf/function to speedup unload time. 3) Parav changes eswitch steering initialization to account for tota_vports rather than for only active vports and Link non uplink representors to PCI device, for uniform naming scheme. 4) Tariq, trivial RX code improvements and missing inidirect calls wrappers. 5) Small cleanup patches ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vaibhav Gupta authored
The .suspend() and .resume() callbacks are not defined for this driver. Still, their power management structure follows the legacy framework. To bring it under the generic framework, simply remove the binding of callbacks from "struct pci_driver". Change code indentation from space to tab in "struct pci_driver". Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Julia Lawall authored
list_for_each_entry is able to handle an empty list. The only effect of avoiding the loop is not initializing the index variable. Drop list_empty tests in cases where these variables are not used. Note that list_for_each_entry is defined in terms of list_first_entry, which indicates that it should not be used on an empty list. But in list_for_each_entry, the element obtained by list_first_entry is not really accessed, only the address of its list_head field is compared to the address of the list head, so the list_first_entry is safe. The semantic patch that makes this change is as follows (with another variant for the no brace case): (http://coccinelle.lip6.fr/) <smpl> @@ expression x,e; iterator name list_for_each_entry; statement S; identifier i; @@ -if (!(list_empty(x))) { list_for_each_entry(i,x,...) S - } ... when != i ? i = e </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Gustavo A. R. Silva authored
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-throughSigned-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Alex Vesker authored
There is no need to print on each unsuccessful matcher ip_version combination since it probably will happen when trying to create all the possible combinations. On a real failure we have a print in the calling function. Signed-off-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Aya Levin authored
The concept of Relaxed Ordering in the PCI Express environment allows switches in the path between the Requester and Completer to reorder some transactions just received before others that were previously enqueued. In ETH driver, there is no question of write integrity since each memory segment is written only once per cycle. In addition, the driver doesn't access the memory shared with the hardware until the corresponding CQE arrives indicating all PCI transactions are done. Running TCP single stream over ConnectX-4 LX, ARM CPU on remote-numa has 300% improvement in the bandwidth. With relaxed ordering turned off: BW:10 [GB/s] With relaxed ordering turned on: BW:40 [GB/s] The driver turns relaxed ordering with respect to the firmware capabilities and the return value from pcie_relaxed_ordering_enabled(). Signed-off-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Tariq Toukan authored
Use the indirect call wrapper API macros for declaration and scope of the RX post WQEs functions. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Tariq Toukan authored
Move them from the generic header file "en.h", to the datapath header file "txrx.h". Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Tariq Toukan authored
Instead of exposing the RQ datapath handlers (from en_rx.c) so that they are set in the control path (in en_main.c), wrap this logic in a single function in en_rx.c and expose it alone. Every profile will now have a pointer to the new mlx5e_rx_handlers structure, instead of directly pointing to the previously-exposed RQ handlers. This significantly improves locality and modularity of the driver, and allows many functions in en_rx.c to become static. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-