- 06 Sep, 2019 21 commits
-
-
Andrii Nakryiko authored
${@:2} is BASH-specific extension, which makes link-vmlinux.sh rely on BASH. Use shift and ${@} instead to fix this issue. Reported-by:Stephen Rothwell <sfr@canb.auug.org.au> Fixes: 341dfcf8 ("btf: expose BTF info through sysfs") Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
Andrii Nakryiko <andriin@fb.com> Acked-by:
Yonghong Song <yhs@fb.com> Reviewed-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller authored
Daniel Borkmann says: ==================== The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Add the ability to use unaligned chunks in the AF_XDP umem. By relaxing where the chunks can be placed, it allows to use an arbitrary buffer size and place whenever there is a free address in the umem. Helps more seamless DPDK AF_XDP driver integration. Support for i40e, ixgbe and mlx5e, from Kevin and Maxim. 2) Addition of a wakeup flag for AF_XDP tx and fill rings so the application can wake up the kernel for rx/tx processing which avoids busy-spinning of the latter, useful when app and driver is located on the same core. Support for i40e, ixgbe and mlx5e, from Magnus and Maxim. 3) bpftool fixes for printf()-like functions so compiler can actually enforce checks, bpftool build system improvements for custom output directories, and addition of 'bpftool map freeze' command, from Quentin. 4) Support attaching/detaching XDP programs from 'bpftool net' command, from Daniel. 5) Automatic xskmap cleanup when AF_XDP socket is released, and several barrier/{read,write}_once fixes in AF_XDP code, from Björn. 6) Relicense of bpf_helpers.h/bpf_endian.h for future libbpf inclusion as well as libbpf versioning improvements, from Andrii. 7) Several new BPF kselftests for verifier precision tracking, from Alexei. 8) Several BPF kselftest fixes wrt endianess to run on s390x, from Ilya. 9) And more BPF kselftest improvements all over the place, from Stanislav. 10) Add simple BPF map op cache for nfp driver to batch dumps, from Jakub. 11) AF_XDP socket umem mapping improvements for 32bit archs, from Ivan. 12) Add BPF-to-BPF call and BTF line info support for s390x JIT, from Yauheni. 13) Small optimization in arm64 JIT to spare 1 insns for BPF_MOD, from Jerin. 14) Fix an error check in bpf_tcp_gen_syncookie() helper, from Petar. 15) Various minor fixes and cleanups, from Nathan, Masahiro, Masanari, Peter, Wei, Yue. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
The variable rx_process_result is being initialized with a value that is never read and is being re-assigned immediately afterwards. The assignment is redundant, so replace it with the return from function lan743x_rx_process_packet. Addresses-Coverity: ("Unused value") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
David S. Miller authored
Simon Horman says: ==================== ravb: remove use of undocumented registers this short series cleans up the RAVB driver a little. The first patch corrects the spelling of the FBP field of SFO register. This register field is unused and should have no run-time effect. The remaining patches remove the use of undocumented registers after some consultation with the internal Renesas BSP team. Changes in v2: * Corrected mangled state of first patch * Patches 2/4 and 3/4 split out of a large patch * Accumulated acks * Tweaked changelog * Claimed authorship of all patches v1 of this series was tested on the following platforms. No behaviour change is expected in v2. * E3 Ebisu * H3 Salvator-XS (ES2.0) * M3-W Salvator-XS * M3-N Salvator-XS * RZ/G1C iW-RainboW-G23S ==================== Signed-off-by: -
Simon Horman authored
Only use the TROCR register on R-Car Gen3 as it is not present on other SoCs. Offsets used for the undocumented registers are considered reserved and should not be written to. After some internal investigation with Renesas it remains unclear why this driver accesses these fields on R-Car Gen2 but regardless of what the historical reasons are the current code is considered incorrect. Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Reviewed-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
Simon Horman authored
This patch removes the use of the undocumented BOC bit of the CCC register. Current documentation for EtherAVB (ravb) describes the offset of what the driver uses as the BOC bit as reserved and that only a value of 0 should be written. After some internal investigation with Renesas it remains unclear why this driver accesses these fields but regardless of what the historical reasons are the current code is considered incorrect. Based on work by Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by:
-
Simon Horman authored
This patch removes the use of the undocumented counter registers CDCR, LCCR, CERCR, CEECR. Offsets used for undocumented registers are considered reserved and should not be written to. After some internal investigation with Renesas it remains unclear why this driver accesses these fields but regardless of what the historical reasons are the current code is considered incorrect. Based on work by Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by:
-
Simon Horman authored
The field name is FBP rather than FPB. This field is unused and could equally be removed from the driver entirely. But there seems no harm in leaving as documentation of the presence of the field. Based on work by Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by:
-
David S. Miller authored
Huazhong Tan says: ==================== net: hns3: add some bugfixes and cleanups This patch-set includes bugfixes and cleanups for the HNS3 ethernet controller driver. [patch 01/07] fixes an error when setting VLAN offload. [patch 02/07] fixes an double free issue when setting ringparam. [patch 03/07] fixes a mis-assignment of hdev->reset_level. [patch 04/07] adds a checking for client's validity. [patch 05/07] simplifies bool variable's assignment. [patch 06/07] disables loopback when initializing. [patch 07/07] makes internal function to static. Change log: V1->V2: fixes comment from Sergei Shtylyov. ==================== Signed-off-by: -
Guojia Liao authored
hclge_dbg_get_m7_info is used only in the hclge_debugfs.c, so it should be declared with static. Signed-off-by:
Guojia Liao <liaoguojia@huawei.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
-
Yufeng Mo authored
If the selftest and reset are performed at the same time, the loopback setting may be still in the enable state after the reset. As a result, packets cannot be sent out. This patch fixes this issue by disabling loopback in hclge_mac_init. Signed-off-by:
Yufeng Mo <moyufeng@huawei.com> Signed-off-by:
-
Guojia Liao authored
Relational and logical operators evaluate to bool, explicit conversion is overly verbose and unnecessary. Signed-off-by:
-
Peng Li authored
HNS3 driver can only unregister client which included in hnae3_client_list. This patch adds the client node validity judgment. Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
-
Huazhong Tan authored
Since hclge_get_reset_level may return HNAE3_NONE_RESET, so hdev->reset_level can not be assigned with the return value in the hclge_reset(), otherwise, it will cause the use of hdev->reset_level in hclge_reset_event get into error. Fixes: 012fcb52 ("net: hns3: activate reset timer when calling reset_event") Signed-off-by:
-
Huazhong Tan authored
The system will panic when change the ringparam in HNS3 drivers: [ 1459.627727] hns3 0000:bd:00.0 eth6: Changing Tx/Rx ring ds from 1024/1024 to 24/24 [ 1459.635766] hns3 0000:bd:00.0 eth6: link down [ 1459.640788] BUG: Bad page state in process ethtool pfn:203f75c18 [ 1459.646940] page:ffff7ee4ffd70600 refcount:0 mapcount:0 mapping:ffff993fff40f400 index:0x0 compound_mapcount: 0 [ 1459.656987] flags: 0x9fffe00000010200(slab|head) [ 1459.661591] raw: 9fffe00000010200 dead000000000100 dead000000000122 ffff993fff40f400 [ 1459.669302] raw: 0000000000000000 0000000080100010 00000000ffffffff 0000000000000000 [ 1459.677016] page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set [ 1459.683432] bad because of flags: 0x200(slab) [ 1459.687775] Modules linked in: ib_ipoib ib_umad rpcrdma ib_iser libiscsi scsi_transport_iscsi hns_roce_hw_v2 crct10dif_ce hns3 ses hclge hnae3 hisi_hpre hisi_zip qm uacce ip_tables x_tables hisi_sas_v3_hw hisi_sas_main libsas scsi_transport_sas [ 1459.709329] CPU: 14 PID: 17244 Comm: ethtool Tainted: G O 5.3.0-rc4-00415-gc86f057 #1 [ 1459.718419] Hardware name: Huawei TaiShan 2280 V2/BC82AMDC, BIOS 2280-V2 CS V3.B040.01 07/26/2019 [ 1459.727248] Call trace: [ 1459.729688] dump_backtrace+0x0/0x150 [ 1459.733335] show_stack+0x24/0x30 [ 1459.736639] dump_stack+0xa0/0xc4 [ 1459.739943] bad_page+0xf0/0x158 [ 1459.743157] free_pages_check_bad+0x84/0xa0 [ 1459.747322] __free_pages_ok+0x348/0x378 [ 1459.751228] page_frag_free+0x80/0x88 [ 1459.754877] skb_free_head+0x38/0x48 [ 1459.758436] skb_release_data+0x134/0x160 [ 1459.762427] skb_release_all+0x30/0x40 [ 1459.766158] consume_skb+0x38/0x108 [ 1459.769633] __dev_kfree_skb_any+0x58/0x68 [ 1459.773718] hns3_fini_ring+0x48/0x58 [hns3] [ 1459.777970] hns3_set_ringparam+0x2a8/0x418 [hns3] [ 1459.782741] dev_ethtool+0x5f4/0x2080 [ 1459.786390] dev_ioctl+0x190/0x3d8 [ 1459.789777] sock_do_ioctl+0xf8/0x220 [ 1459.793423] sock_ioctl+0x3bc/0x490 [ 1459.796896] do_vfs_ioctl+0xc4/0x868 [ 1459.800454] ksys_ioctl+0x8c/0xa0 [ 1459.803752] __arm64_sys_ioctl+0x28/0x38 [ 1459.807658] el0_svc_common.constprop.0+0xe0/0x1e0 [ 1459.812426] el0_svc_handler+0x34/0x90 [ 1459.816158] el0_svc+0x10/0x14 [ 1459.819220] Disabling lock debugging due to kernel taint [ 1459.825182] ------------[ cut here ]------------ Since ndo_stop will reclaim the RX's skb allocated by the driver, so the backed up ring parameter should not keep this info. Fixes: a723fb8e ("net: hns3: refine for set ring parameters") Signed-off-by:
-
Jian Shen authored
In original codes, the VF index used incorrectly in function hclge_set_vlan_rx_offload_cfg() and hclge_set_vlan_rx_offload_cfg(). When VF id is greater than 8, for example 9, it will set the same bit with VF id 1. This patch fixes it by using vport->vport_id % HCLGE_VF_NUM_PER_CMD / HCLGE_VF_NUM_PER_BYTE as the array index, instead of vport->vport_id / HCLGE_VF_NUM_PER_CMD. Fixes: 052ece6d ("net: hns3: add ethtool related offload command") Signed-off-by:
Jian Shen <shenjian15@huawei.com> Signed-off-by:
-
Andy Shevchenko authored
This patch amends the error and warning messages across the platform driver. It includes the following changes: - append \n to the end of messages - change pr_* macros to dev_* Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Jose Abreu authored
While running stmmac selftests I found that in my 1G setup some tests were failling when running with PHY loopback enabled. It looks like when loopback is enabled the PHY will report that Link is down even though there is a valid connection. As in loopback mode the data will not be sent anywhere we can bypass the logic of checking if Link is valid thus saving unecessary reads. Signed-off-by:
Jose Abreu <joabreu@synopsys.com> Signed-off-by:
-
David Dai authored
For high speed adapter like Mellanox CX-5 card, it can reach upto 100 Gbits per second bandwidth. Currently htb already supports 64bit rate in tc utility. However police action rate and peakrate are still limited to 32bit value (upto 32 Gbits per second). Add 2 new attributes TCA_POLICE_RATE64 and TCA_POLICE_RATE64 in kernel for 64bit support so that tc utility can use them for 64bit rate and peakrate value to break the 32bit limit, and still keep the backward binary compatibility. Tested-by:
David Dai <zdai@linux.vnet.ibm.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Paul Blakey authored
Offloaded OvS datapath rules are translated one to one to tc rules, for example the following simplified OvS rule: recirc_id(0),in_port(dev1),eth_type(0x0800),ct_state(-trk) actions:ct(),recirc(2) Will be translated to the following tc rule: $ tc filter add dev dev1 ingress \ prio 1 chain 0 proto ip \ flower tcp ct_state -trk \ action ct pipe \ action goto chain 2 Received packets will first travel though tc, and if they aren't stolen by it, like in the above rule, they will continue to OvS datapath. Since we already did some actions (action ct in this case) which might modify the packets, and updated action stats, we would like to continue the proccessing with the correct recirc_id in OvS (here recirc_id(2)) where we left off. To support this, introduce a new skb extension for tc, which will be used for translating tc chain to ovs recirc_id to handle these miss cases. Last tc chain index will be set by tc goto chain action and read by OvS datapath. Signed-off-by:
Paul Blakey <paulb@mellanox.com> Signed-off-by:
Vlad Buslov <vladbu@mellanox.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Acked-by:
Pravin B Shelar <pshelar@ovn.org> Signed-off-by:
-
zhong jiang authored
Continue is not needed at the bottom of a loop. Signed-off-by:
zhong jiang <zhongjiang@huawei.com> Signed-off-by:
-
- 05 Sep, 2019 19 commits
-
-
Daniel Borkmann authored
Björn Töpel says: ==================== This is a four patch series of various barrier, {READ, WRITE}_ONCE cleanups in the AF_XDP socket code. More details can be found in the corresponding commit message. Previous revisions: v1 [4] and v2 [5]. For an AF_XDP socket, most control plane operations are done under the control mutex (struct xdp_sock, mutex), but there are some places where members of the struct is read outside the control mutex. The dev, queue_id members are set in bind() and cleared at cleanup. The umem, fq, cq, tx, rx, and state member are all assigned in various places, e.g. bind() and setsockopt(). When the members are assigned, they are protected by the control mutex, but since they are read outside the mutex, a WRITE_ONCE is required to avoid store-tearing on the read-side. Prior the state variable was introduced by Ilya, the dev member was used to determine whether the socket was bound or not. However, when dev was read, proper SMP barriers and READ_ONCE were missing. In order to address the missing barriers and READ_ONCE, we start using the state variable as a point of synchronization. The state member read/write is paired with proper SMP barriers, and from this follows that the members described above does not need READ_ONCE statements if used in conjunction with state check. To summarize: The members struct xdp_sock members dev, queue_id, umem, fq, cq, tx, rx, and state were read lock-less, with incorrect barriers and missing {READ, WRITE}_ONCE. After this series umem, fq, cq, tx, rx, and state are read lock-less. When these members are updated, WRITE_ONCE is used. When read, READ_ONCE are only used when read outside the control mutex (e.g. mmap) or, not synchronized with the state member (XSK_BOUND plus smp_rmb()) [1] https://lore.kernel.org/bpf/beef16bb-a09b-40f1-7dd0-c323b4b89b17@iogearbox.net/ [2] https://lwn.net/Articles/793253/ [3] https://github.com/google/ktsan/wiki/READ_ONCE-and-WRITE_ONCE [4] https://lore.kernel.org/bpf/20190822091306.20581-1-bjorn.topel@gmail.com/ [5] https://lore.kernel.org/bpf/20190826061053.15996-1-bjorn.topel@gmail.com/ v2->v3: Minor restructure of commits. Improve cover and commit messages. (Daniel) v1->v2: Removed redundant dev check. (Jonathan) ==================== Signed-off-by:Daniel Borkmann <daniel@iogearbox.net>
-
Björn Töpel authored
When accessing the members of an XDP socket, the control mutex should be held. This commit fixes that. Acked-by:
Jonathan Lemon <jonathan.lemon@gmail.com> Fixes: a36b38aa ("xsk: add sock_diag interface for AF_XDP") Signed-off-by:
Björn Töpel <bjorn.topel@intel.com> Signed-off-by:
-
Björn Töpel authored
Prior the state variable was introduced by Ilya, the dev member was used to determine whether the socket was bound or not. However, when dev was read, proper SMP barriers and READ_ONCE were missing. In order to address the missing barriers and READ_ONCE, we start using the state variable as a point of synchronization. The state member read/write is paired with proper SMP barriers, and from this follows that the members described above does not need READ_ONCE if used in conjunction with state check. In all syscalls and the xsk_rcv path we check if state is XSK_BOUND. If that is the case we do a SMP read barrier, and this implies that the dev, umem and all rings are correctly setup. Note that no READ_ONCE are needed for these variable if used when state is XSK_BOUND (plus the read barrier). To summarize: The members struct xdp_sock members dev, queue_id, umem, fq, cq, tx, rx, and state were read lock-less, with incorrect barriers and missing {READ, WRITE}_ONCE. Now, umem, fq, cq, tx, rx, and state are read lock-less. When these members are updated, WRITE_ONCE is used. When read, READ_ONCE are only used when read outside the control mutex (e.g. mmap) or, not synchronized with the state member (XSK_BOUND plus smp_rmb()) Note that dev and queue_id do not need a WRITE_ONCE or READ_ONCE, due to the introduce state synchronization (XSK_BOUND plus smp_rmb()). Introducing the state check also fixes a race, found by syzcaller, in xsk_poll() where umem could be accessed when stale. Suggested-by:Hillf Danton <hdanton@sina.com> Reported-by: syzbot+c82697e3043781e08802@syzkaller.appspotmail.com Fixes: 77cd0d7b ("xsk: add support for need_wakeup flag in AF_XDP rings") Signed-off-by:
-
Björn Töpel authored
The umem member of struct xdp_sock is read outside of the control mutex, in the mmap implementation, and needs a WRITE_ONCE to avoid potential store-tearing. Acked-by:
-
Björn Töpel authored
Use WRITE_ONCE when doing the store of tx, rx, fq, and cq, to avoid potential store-tearing. These members are read outside of the control mutex in the mmap implementation. Acked-by:
-
Alexei Starovoitov authored
Add two tests to check that stack slot marking during backtracking doesn't trigger 'spi > allocated_stack' warning. One test is using BPF_ST insn. Another is using BPF_STX. Signed-off-by:
-
Kevin Laatz authored
Currently, we don't add headroom to the handle in ixgbe_zca_free, ixgbe_alloc_buffer_slow_zc and ixgbe_alloc_buffer_zc. The addition of the headroom to the handle was removed in commit d8c3061e ("ixgbe: modify driver for handling offsets"), which will break things when headroom isvnon-zero. This patch fixes this and uses xsk_umem_adjust_offset to add it appropritely based on the mode being run. Fixes: d8c3061e ("ixgbe: modify driver for handling offsets") Reported-by:
Kevin Laatz <kevin.laatz@intel.com> Acked-by:
-
Kevin Laatz authored
Currently, we don't add headroom to the handle in i40e_zca_free, i40e_alloc_buffer_slow_zc and i40e_alloc_buffer_zc. The addition of the headroom to the handle was removed in commit 2f86c806 ("i40e: modify driver for handling offsets"), which will break things when headroom is non-zero. This patch fixes this and uses xsk_umem_adjust_offset to add it appropritely based on the mode being run. Fixes: 2f86c806 ("i40e: modify driver for handling offsets") Reported-by:
-
Hayes Wang authored
The UPS feature only works for runtime suspend, so UPS flags only need to be set before enabling runtime suspend. Therefore, I create a struct to record relative information, and use it before runtime suspend. All chips could record such information, even though not all of them support the feature of UPS. Then, some functions could be combined. Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
-
Krzysztof Wilczynski authored
Move the static keyword to the front of declaration of g_dsaf_mode_match, and resolve the following compiler warning that can be seen when building with warnings enabled (W=1): drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c:27:1: warning: ‘static’ is not at beginning of declaration [-Wold-style-declaration] Signed-off-by:
Krzysztof Wilczynski <kw@linux.com> Signed-off-by:
-
Krzysztof Wilczynski authored
Move the static keyword to the front of declaration of iwarp_state_names, and resolve the following compiler warning that can be seen when building with warnings enabled (W=1): drivers/net/ethernet/qlogic/qed/qed_iwarp.c:385:1: warning: ‘static’ is not at beginning of declaration [-Wold-style-declaration] Also, resolve checkpatch.pl script warning: WARNING: static const char * array should probably be static const char * const Signed-off-by:
-
Andy Shevchenko authored
Use %*ph format to print small buffer as hex string. Signed-off-by:
-
David S. Miller authored
Harini Katakam says: ==================== Fix GMII2RGMII private field Fix the usage of external phy's priv field by gmii2rgmii driver. Based on net-next. ==================== Signed-off-by: -
Harini Katakam authored
Use set/get drv data in phydev's mdio device instead. Phy device priv field maybe used by the external phy driver and should not be overwritten. Signed-off-by:
Harini Katakam <harini.katakam@xilinx.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Harini Katakam authored
Add set/get drv_data helpers for mdio device. Signed-off-by:
-
David S. Miller authored
Arseny Solokha says: ==================== gianfar: some assorted cleanup This is a cleanup series for the gianfar Ethernet driver, following up a discussion in [1]. It is intended to precede a conversion of gianfar from PHYLIB to PHYLINK API, which will be submitted later in its version 2. However, it won't make a conversion cleaner, except for the last patch in this series. Obviously this series is not intended for -stable. The first patch looks super controversial to me, as it moves lots of code around for the sole purpose of getting rid of static forward declarations in two translation units. On the other hand, this change is purely mechanical and cannot do any harm other than cluttering git blame output. I can prepare an alternative patch for only swapping adjacent functions around, if necessary. The second patch is a trivial follow-up to the first one, making functions that are only called from the same translation unit static. The third patch removes some now unused macro and structure definitions from gianfar.h, slipped away from various cleanups in the past. The fourth patch, also suggested in [1], makes the driver consistently use PHY connection type value obtained from a Device Tree node, instead of ignoring it and using the one auto-detected by MAC, when connecting to PHY. Obviously a value has to be specified correctly in DT source, or omitted altogether, in which case the driver will fall back to auto-detection. When querying a DT node, the driver will also take both applicable properties into account by making a proper API call instead of open-coding the lookup half-way correctly. [1] https://lore.kernel.org/netdev/CA+h21hruqt6nGG5ksDSwrGH_w5GtGF4fjAMCWJne7QJrjusERQ@mail.gmail.com/ ==================== Signed-off-by:
-
Arseny Solokha authored
Historically, gianfar only used phy-connection-type DT property when connected to PHY in the rgmii-id mode. It ignored the property otherwise, relying on the connection type auto-detection carried out by MAC and providing that reconstructed mode to of_phy_connect(). It also did not consider alternative phy-mode property at all. Make the driver properly query DT node for PHY connection type first and use an obtained value if it was specified there. Otherwise, if a particular DT relies on connection type auto-detection, fall back to reconstructing the value from MAC registers, as before. Signed-off-by:
Arseny Solokha <asolokha@kb.kras.ru> Signed-off-by:
-
Arseny Solokha authored
Remove now unused macro and structure definitions from gianfar.h that have accumulated there over time. Signed-off-by:
-
Arseny Solokha authored
Make functions that do not have callers outside the translation unit they are defined in static. Signed-off-by:
-
