Pull PNP fix from Rafael Wysocki:
 "This fixes build errors due to a missing header file inclusion in
  drivers/pnp/pnpbios/core.c (Randy Dunlap)"

* tag 'pnp-extra-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PNP: pnpbios: add header file to fix build errors

Pull more ACPI updates from Rafael Wysocki:
 "Two more fixes in ACPI drivers, one in the ACPI EC driver
  (stable-candidate) and one in the ACPI button driver.

  Specifics:

   - An ACPI EC driver fix from the 4.3 cycle may cause the ACPICA's
     method reentrancy limit to be exceeded for a _Qxx method due to a
     large number of concurrent EC operations, so prevent that from
     happening by moving the EC handling into a separate workqueue with
     a limit on the number of concurrently executed work items (Lv
     Zheng)

   - Fix the cleanup code in the ACPI button driver that forgets to
     clear two variables on exit which causes an error to occur on the
     next attmpt to load the driver (Benjamin Tissoires)"

* tag 'acpi-extra-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / EC: Work around method reentrancy limit in ACPICA for _Qxx
  ACPI / button: remove pointer to old lid_sysfs on unbind

Pull more power management updates from Rafael Wysocki:
 "A few more fixes and cleanups in the x86-64 low-level hibernation
  code, PM core, cpufreq (Kconfig and intel_pstate), and the operating
  points framework.

  Specifics:

   - Prevent the low-level assembly hibernate code on x86-64 from
     referring to __PAGE_OFFSET directly as a symbol which doesn't work
     when the kernel identity mapping base is randomized, in which case
     __PAGE_OFFSET is a variable (Rafael Wysocki).

   - Avoid selecting CPU_FREQ_STAT by default as the statistics are not
     required for proper cpufreq operation (Borislav Petkov).

   - Add Skylake-X and Broadwell-X IDs to the intel_pstate's list of
     processors where out-of-band (OBB) control of P-states is possible
     and if that is in use, intel_pstate should not attempt to manage
     P-states (Srinivas Pandruvada).

   - Drop some unnecessary checks from the wakeup IRQ handling code in
     the PM core (Markus Elfring).

   - Reduce the number operating performance point (OPP) lookups in one
     of the OPP framework's helper functions (Jisheng Zhang)"

* tag 'pm-extra-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  x86/power/64: Do not refer to __PAGE_OFFSET from assembly code
  cpufreq: Do not default-yes CPU_FREQ_STAT
  cpufreq: intel_pstate: Add more out-of-band IDs
  PM / OPP: optimize dev_pm_opp_set_rate() performance a bit
  PM-wakeup: Delete unnecessary checks before three function calls

Pull more input updates from Dmitry Torokhov:
 "Two new drivers for touchscreen controllers:

   - Silead touchscreen controllers
   - SiS 9200 family touchscreen controllers

  and a few driver fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: silead - remove some dead code
  Input: sis-i2c - select CONFIG_CRC_ITU_T
  Input: add driver for SiS 9200 family I2C touchscreen controllers
  Input: ili210x - fix permissions on "calibrate" attribute
  Input: elan_i2c - properly wake up touchpad on ASUS laptops
  Input: add driver for Silead touchscreens
  Input: elantech - fix debug dump of the current packet
  Input: rotary_encoder - support binary encoding of states
  Input: xpad - power off wireless 360 controllers on suspend
  Input: i8042 - break load dependency between atkbd/psmouse and i8042
  Input: synaptics-rmi4 - do not check for NULL when calling of_node_put()
  Input: cros_ec_keyb - cleanup use of dev

Pull more USB updates from Greg KH:
 "Here are a few more straggler patches for USB for 4.8-rc1.

  Most of these are for the usb-serial driver tree.  All of those have
  been in linux-next for a long time, but missed my previous pull
  request to you.

  The remaining change is to fix up a staging tree build error, due to
  some USB gadget driver changes that went in.  I put it in this tree as
  it was for a USB driver and people are reporting the build error on
  your tree.

  All of these have been in linux-next for this week, and longer for the
  usb-serial changes"

* tag 'usb-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  staging: emxx_udc: allow modular build
  USB: serial: use variable for status
  USB: serial: option: add support for Telit LE910 PID 0x1206
  USB: serial: cp210x: use kmemdup
  USB: serial: ti_usb_3410_5052: use functions rather than macros
  USB: serial: ti_usb_3410_5052: remove ti_usb_3410_5052.h
  USB: serial: ti_usb_3410_5052: use __packed
  USB: serial: ti_usb_3410_5052: remove useless comments

* acpi-ec:
  ACPI / EC: Work around method reentrancy limit in ACPICA for _Qxx

* acpi-button:
  ACPI / button: remove pointer to old lid_sysfs on unbind

Pull RTC updates from Alexandre Belloni:
 "RTC for 4.8

  Cleanups:
   - huge cleanup of rtc-generic and char/genrtc this allowed to cleanup
     rtc-cmos, rtc-sh, rtc-m68k, rtc-powerpc and rtc-parisc
   - move mn10300 to rtc-cmos

  Subsystem:
   - fix wakealarms after hibernate
   - multiples fixes for rctest
   - simplify implementations of .read_alarm

  New drivers:
   - Maxim MAX6916

  Drivers:
   - ds1307: fix weekday
   - m41t80: add wakeup support
   - pcf85063: add support for PCF85063A variant
   - rv8803: extend i2c fix and other fixes
   - s35390a: fix alarm reading, this fixes instant reboot after
     shutdown for QNAP TS-41x
   - s3c: clock fixes"

* tag 'rtc-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (65 commits)
  rtc: rv8803: Clear V1F when setting the time
  rtc: rv8803: Stop the clock while setting the time
  rtc: rv8803: Always apply the I²C workaround
  rtc: rv8803: Fix read day of week
  rtc: rv8803: Remove the check for valid time
  rtc: rv8803: Kconfig: Indicate rx8900 support
  rtc: asm9260: remove .owner field for driver
  rtc: at91sam9: Fix missing spin_lock_init()
  rtc: m41t80: add suspend handlers for alarm IRQ
  rtc: m41t80: make it a real error message
  rtc: pcf85063: Add support for the PCF85063A device
  rtc: pcf85063: fix year range
  rtc: hym8563: in .read_alarm set .tm_sec to 0 to signal minute accuracy
  rtc: explicitly set tm_sec = 0 for drivers with minute accurancy
  rtc: s3c: Add s3c_rtc_{enable/disable}_clk in s3c_rtc_setfreq()
  rtc: s3c: Remove unnecessary call to disable already disabled clock
  rtc: abx80x: use devm_add_action_or_reset()
  rtc: m41t80: use devm_add_action_or_reset()
  rtc: fix a typo and reduce three empty lines to one
  rtc: s35390a: improve two comments in .set_alarm
  ...

* pm-sleep:
  x86/power/64: Do not refer to __PAGE_OFFSET from assembly code

* pm-cpufreq:
  cpufreq: Do not default-yes CPU_FREQ_STAT
  cpufreq: intel_pstate: Add more out-of-band IDs

* pm-core:
  PM-wakeup: Delete unnecessary checks before three function calls

* pm-opp:
  PM / OPP: optimize dev_pm_opp_set_rate() performance a bit

Pull sound fixes from Takashi Iwai:
 "Nothing existing here: as usual a few HD-audio fixes (device fixups, a
  new AMD PCI ID, and a fix for krealloc() usage), in addition to a fix
  in Kconfig for legacy arm drivers"

* tag 'sound-fix-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Fix headset mic detection problem for two dell machines
  ALSA: hda: Fix krealloc() with __GFP_ZERO usage
  ALSA: hda: add AMD Bonaire AZ PCI ID with proper driver caps
  ALSA: arm: Fix empty menuconfig SND_ARM
  ALSA: hda - On-board speaker fixup on ACER Veriton
  ALSA: hda/realtek - Can't adjust speaker's volume on a Dell AIO

Pull more powerpc updates from Michael Ellerman:
 "These were delayed for various reasons, so I let them sit in next a
  bit longer, rather than including them in my first pull request.

  Fixes:
   - Fix early access to cpu_spec relocation from Benjamin Herrenschmidt
   - Fix incorrect event codes in power9-event-list from Madhavan Srinivasan
   - Move register_process_table() out of ppc_md from Michael Ellerman

  Use jump_label use for [cpu|mmu]_has_feature():
   - Add mmu_early_init_devtree() from Michael Ellerman
   - Move disable_radix handling into mmu_early_init_devtree() from Michael Ellerman
   - Do hash device tree scanning earlier from Michael Ellerman
   - Do radix device tree scanning earlier from Michael Ellerman
   - Do feature patching before MMU init from Michael Ellerman
   - Check features don't change after patching from Michael Ellerman
   - Make MMU_FTR_RADIX a MMU family feature from Aneesh Kumar K.V
   - Convert mmu_has_feature() to returning bool from Michael Ellerman
   - Convert cpu_has_feature() to returning bool from Michael Ellerman
   - Define radix_enabled() in one place & use static inline from Michael Ellerman
   - Add early_[cpu|mmu]_has_feature() from Michael Ellerman
   - Convert early cpu/mmu feature check to use the new helpers from Aneesh Kumar K.V
   - jump_label: Make it possible for arches to invoke jump_label_init() earlier from Kevin Hao
   - Call jump_label_init() in apply_feature_fixups() from Aneesh Kumar K.V
   - Remove mfvtb() from Kevin Hao
   - Move cpu_has_feature() to a separate file from Kevin Hao
   - Add kconfig option to use jump labels for cpu/mmu_has_feature() from Michael Ellerman
   - Add option to use jump label for cpu_has_feature() from Kevin Hao
   - Add option to use jump label for mmu_has_feature() from Kevin Hao
   - Catch usage of cpu/mmu_has_feature() before jump label init from Aneesh Kumar K.V
   - Annotate jump label assembly from Michael Ellerman

  TLB flush enhancements from Aneesh Kumar K.V:
   - radix: Implement tlb mmu gather flush efficiently
   - Add helper for finding SLBE LLP encoding
   - Use hugetlb flush functions
   - Drop multiple definition of mm_is_core_local
   - radix: Add tlb flush of THP ptes
   - radix: Rename function and drop unused arg
   - radix/hugetlb: Add helper for finding page size
   - hugetlb: Add flush_hugetlb_tlb_range
   - remove flush_tlb_page_nohash

  Add new ptrace regsets from Anshuman Khandual and Simon Guo:
   - elf: Add powerpc specific core note sections
   - Add the function flush_tmregs_to_thread
   - Enable in transaction NT_PRFPREG ptrace requests
   - Enable in transaction NT_PPC_VMX ptrace requests
   - Enable in transaction NT_PPC_VSX ptrace requests
   - Adapt gpr32_get, gpr32_set functions for transaction
   - Enable support for NT_PPC_CGPR
   - Enable support for NT_PPC_CFPR
   - Enable support for NT_PPC_CVMX
   - Enable support for NT_PPC_CVSX
   - Enable support for TM SPR state
   - Enable NT_PPC_TM_CTAR, NT_PPC_TM_CPPR, NT_PPC_TM_CDSCR
   - Enable support for NT_PPPC_TAR, NT_PPC_PPR, NT_PPC_DSCR
   - Enable support for EBB registers
   - Enable support for Performance Monitor registers"

* tag 'powerpc-4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (48 commits)
  powerpc/mm: Move register_process_table() out of ppc_md
  powerpc/perf: Fix incorrect event codes in power9-event-list
  powerpc/32: Fix early access to cpu_spec relocation
  powerpc/ptrace: Enable support for Performance Monitor registers
  powerpc/ptrace: Enable support for EBB registers
  powerpc/ptrace: Enable support for NT_PPPC_TAR, NT_PPC_PPR, NT_PPC_DSCR
  powerpc/ptrace: Enable NT_PPC_TM_CTAR, NT_PPC_TM_CPPR, NT_PPC_TM_CDSCR
  powerpc/ptrace: Enable support for TM SPR state
  powerpc/ptrace: Enable support for NT_PPC_CVSX
  powerpc/ptrace: Enable support for NT_PPC_CVMX
  powerpc/ptrace: Enable support for NT_PPC_CFPR
  powerpc/ptrace: Enable support for NT_PPC_CGPR
  powerpc/ptrace: Adapt gpr32_get, gpr32_set functions for transaction
  powerpc/ptrace: Enable in transaction NT_PPC_VSX ptrace requests
  powerpc/ptrace: Enable in transaction NT_PPC_VMX ptrace requests
  powerpc/ptrace: Enable in transaction NT_PRFPREG ptrace requests
  powerpc/process: Add the function flush_tmregs_to_thread
  elf: Add powerpc specific core note sections
  powerpc/mm: remove flush_tlb_page_nohash
  powerpc/mm/hugetlb: Add flush_hugetlb_tlb_range
  ...

Pull metag architecture updates from James Hogan:
 "Just a few minor fixes:

   - Fix another incorrect inline asm register constraint, which has
     been lying quietly for 5 and a half years before finally causing
     build breakage during this merge window.

   - Removal of duplicated KERN_INFO from Joe Perches

   - Typo fixes from Andrea Gelmini"

* tag 'metag-for-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag:
  metag: Fix __cmpxchg_u32 asm constraint for CMP
  metag: Remove duplicate KERN_<LEVEL> prefix
  metag: Fix typos

If a PCI bridge (or PCIe port) that is runtime-suspended gets an ACPI
hotplug notification, such as a bus check, it has to be resumed before
re-scanning the devices below it, or those devices will not be
accessible and will be treated as hot-removed.

Make that happen and let the bridge suspend again after the bus below it
has been re-scanned.

This is a replacement for commit 16468c78 ("ACPI / hotplug / PCI:
Runtime resume bridge before rescan") that has been reverted, because it
introduced a system resume regression (due to missing bridge->pci_dev
checks that are necessary in case the notification is targeted at the
host bridge) and it is necessary for the code added by commit
006d44e4 ("PCI: Add runtime PM support for PCIe ports") to work as
expected.
Tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge misc fixes from Andrew Morton:
 "A few late-breaking fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm/memblock.c: fix NULL dereference error
  MAINTAINERS: update cgroup's document path
  slub: drop bogus inline for fixup_red_left()
  powerpc/fsl_rio: fix a missing error code
  mm: initialise per_cpu_nodestats for all online pgdats at boot
  mm/memblock: fix a typo in a comment
  mm: disable CONFIG_MEMORY_HOTPLUG when KASAN is enabled

Pull second round of rdma updates from Doug Ledford:
 "This can be split out into just two categories:

   - fixes to the RDMA R/W API in regards to SG list length limits
     (about 5 patches)

   - fixes/features for the Intel hfi1 driver (everything else)

  The hfi1 driver is still being brought to full feature support by
  Intel, and they have a lot of people working on it, so that amounts to
  almost the entirety of this pull request"

* tag 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (84 commits)
  IB/hfi1: Add cache evict LRU list
  IB/hfi1: Fix memory leak during unexpected shutdown
  IB/hfi1: Remove unneeded mm argument in remove function
  IB/hfi1: Consistently call ops->remove outside spinlock
  IB/hfi1: Use evict mmu rb operation
  IB/hfi1: Add evict operation to the mmu rb handler
  IB/hfi1: Fix TID caching actions
  IB/hfi1: Make the cache handler own its rb tree root
  IB/hfi1: Make use of mm consistent
  IB/hfi1: Fix user SDMA racy user request claim
  IB/hfi1: Fix error condition that needs to clean up
  IB/hfi1: Release node on insert failure
  IB/hfi1: Validate SDMA user iovector count
  IB/hfi1: Validate SDMA user request index
  IB/hfi1: Use the same capability state for all shared contexts
  IB/hfi1: Prevent null pointer dereference
  IB/hfi1: Rename TID mmu_rb_* functions
  IB/hfi1: Remove unneeded empty check in hfi1_mmu_rb_unregister()
  IB/hfi1: Restructure hfi1_file_open
  IB/hfi1: Make iovec loop index easy to understand
  ...

Pull base rdma updates from Doug Ledford:
 "Round one of 4.8 code: while this is mostly normal, there is a new
  driver in here (the driver was hosted outside the kernel for several
  years and is actually a fairly mature and well coded driver).  It
  amounts to 13,000 of the 16,000 lines of added code in here.

  Summary:

   - Updates/fixes for iw_cxgb4 driver
   - Updates/fixes for mlx5 driver
   - Add flow steering and RSS API
   - Add hardware stats to mlx4 and mlx5 drivers
   - Add firmware version API for RDMA driver use
   - Add the rxe driver (this is a software RoCE driver that makes any
     Ethernet device a RoCE device)
   - Fixes for i40iw driver
   - Support for send only multicast joins in the cma layer
   - Other minor fixes"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (72 commits)
  Soft RoCE driver
  IB/core: Support for CMA multicast join flags
  IB/sa: Add cached attribute containing SM information to SA port
  IB/uverbs: Fix race between uverbs_close and remove_one
  IB/mthca: Clean up error unwind flow in mthca_reset()
  IB/mthca: NULL arg to pci_dev_put is OK
  IB/hfi1: NULL arg to sc_return_credits is OK
  IB/mlx4: Add diagnostic hardware counters
  net/mlx4: Query performance and diagnostics counters
  net/mlx4: Add diagnostic counters capability bit
  Use smaller 512 byte messages for portmapper messages
  IB/ipoib: Report SG feature regardless of HW UD CSUM capability
  IB/mlx4: Don't use GFP_ATOMIC for CQ resize struct
  IB/hfi1: Disable by default
  IB/rdmavt: Disable by default
  IB/mlx5: Fix port counter ID association to QP offset
  IB/mlx5: Fix iteration overrun in GSI qps
  i40iw: Add NULL check for puda buffer
  i40iw: Change dup_ack_thresh to u8
  i40iw: Remove unnecessary check for moving CQ head
  ...

Pull SCSI target updates from Nicholas Bellinger:
 "The most notable item is IBM virtual SCSI target driver, that was
  originally ported to target-core back in 2010 by Tomo-san, and has
  been brought forward to v4.x code by Bryant Ly, Michael Cyr and co
  over the last months.

  Also included are two ORDERED task related bug-fixes Bryant + Michael
  found along the way using ibmvscsis with AIX guests, plus a few
  miscellaneous target-core + iscsi-target bug-fixes with associated
  stable tags"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  target: fix spelling mistake: "limitiation" -> "limitation"
  target: Fix residual overflow handling in target_complete_cmd_with_length
  tcm_fc: set and unset FCP_SPPF_TARG_FCN
  iscsi-target: Fix panic when adding second TCP connection to iSCSI session
  ibmvscsis: Initial commit of IBM VSCSI Tgt Driver
  target: Fix ordered task CHECK_CONDITION early exception handling
  target: Fix ordered task target_setup_cmd_from_cdb exception hang
  target: Fix max_unmap_lba_count calc overflow
  target: Fix race between iscsi-target connection shutdown + ABORT_TASK
  target: Fix missing complete during ABORT_TASK + CMD_T_FABRIC_STOP

It causes NULL dereference error and failure to get type_a->regions[0]
info if parameter type_b of __next_mem_range_rev() == NULL

Fix this by checking before dereferring and initializing idx_b to 0

The approach is tested by dumping all types of region via
__memblock_dump_all() and __next_mem_range_rev() fixed to UART
separately the result is okay after checking the logs.

Link: http://lkml.kernel.org/r/57A0320D.6070102@zoho.comSigned-off-by: zijun_hu <zijun_hu@htc.com>
Tested-by: zijun_hu <zijun_hu@htc.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cgroup's document path is changed to "cgroup-v1".  update it.

Link: http://lkml.kernel.org/r/1470322507-5161-1-git-send-email-iamyooon@gmail.comSigned-off-by: seokhoon.yoon <iamyooon@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

With m68k-linux-gnu-gcc-4.1:

    include/linux/slub_def.h:126: warning: `fixup_red_left' declared inline after being called
    include/linux/slub_def.h:126: warning: previous declaration of `fixup_red_left' was here

Commit c146a2b9 ("mm, kasan: account for object redzone in SLUB's
nearest_obj()") made fixup_red_left() global, but forgot to remove the
inline keyword.

Fixes: c146a2b9 ("mm, kasan: account for object redzone in SLUB's nearest_obj()")
Link: http://lkml.kernel.org/r/1470256262-1586-1-git-send-email-geert@linux-m68k.orgSigned-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Alexander Potapenko <glider@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We should set the error code here rather than incorrectly returning 0.
Otherwise static checkers complain.

Link: http://lkml.kernel.org/r/20160804053525.GM775@mwandaSigned-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Alexandre Bounine <alexandre.bounine@idt.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Paul Mackerras and Reza Arbab reported that machines with memoryless
nodes fail when vmstats are refreshed.  Paul reported an oops as follows

  Unable to handle kernel paging request for data at address 0xff7a10000
  Faulting instruction address: 0xc000000000270cd0
  Oops: Kernel access of bad area, sig: 11 [#1]
  SMP NR_CPUS=2048 NUMA PowerNV
  Modules linked in:
  CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.7.0-kvm+ #118
  task: c000000ff0680010 task.stack: c000000ff0704000
  NIP: c000000000270cd0 LR: c000000000270ce8 CTR: 0000000000000000
  REGS: c000000ff0707900 TRAP: 0300   Not tainted  (4.7.0-kvm+)
  MSR: 9000000102009033 <SF,HV,VEC,EE,ME,IR,DR,RI,LE,TM[E]>  CR: 846b6824  XER: 20000000
  CFAR: c000000000008768 DAR: 0000000ff7a10000 DSISR: 42000000 SOFTE: 1
  NIP refresh_zone_stat_thresholds+0x80/0x240
  LR refresh_zone_stat_thresholds+0x98/0x240
  Call Trace:
    refresh_zone_stat_thresholds+0xb8/0x240 (unreliable)

Both supplied potential fixes but one potentially misses checks and
another had redundant initialisations.  This version initialises
per_cpu_nodestats on a per-pgdat basis instead of on a per-zone basis.

Link: http://lkml.kernel.org/r/20160804092404.GI2799@techsingularity.netSigned-off-by: Mel Gorman <mgorman@techsingularity.net>
Reported-by: Paul Mackerras <paulus@ozlabs.org>
Reported-by: Reza Arbab <arbab@linux.vnet.ibm.com>
Tested-by: Reza Arbab <arbab@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

s/accomodate/accommodate/

Link: http://lkml.kernel.org/r/20160804121824.18100-1-kuleshovmail@gmail.comSigned-off-by: Alexander Kuleshov <kuleshovmail@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

At present it is obvious that memory online and offline will fail when
KASAN is enabled.  So add the condition to limit the memory_hotplug when
KASAN is enabled.

Link: http://lkml.kernel.org/r/1470063651-29519-1-git-send-email-zhongjiang@huawei.comSigned-off-by: zhong jiang <zhongjiang@huawei.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull nfsd updates from Bruce Fields:
 "Highlights:

   - Trond made a change to the server's tcp logic that allows a fast
     client to better take advantage of high bandwidth networks, but may
     increase the risk that a single client could starve other clients;
     a new sunrpc.svc_rpc_per_connection_limit parameter should help
     mitigate this in the (hopefully unlikely) event this becomes a
     problem in practice.

   - Tom Haynes added a minimal flex-layout pnfs server, which is of no
     use in production for now--don't build it unless you're doing
     client testing or further server development"

* tag 'nfsd-4.8' of git://linux-nfs.org/~bfields/linux: (32 commits)
  nfsd: remove some dead code in nfsd_create_locked()
  nfsd: drop unnecessary MAY_EXEC check from create
  nfsd: clean up bad-type check in nfsd_create_locked
  nfsd: remove unnecessary positive-dentry check
  nfsd: reorganize nfsd_create
  nfsd: check d_can_lookup in fh_verify of directories
  nfsd: remove redundant zero-length check from create
  nfsd: Make creates return EEXIST instead of EACCES
  SUNRPC: Detect immediate closure of accepted sockets
  SUNRPC: accept() may return sockets that are still in SYN_RECV
  nfsd: allow nfsd to advertise multiple layout types
  nfsd: Close race between nfsd4_release_lockowner and nfsd4_lock
  nfsd/blocklayout: Make sure calculate signature/designator length aligned
  xfs: abstract block export operations from nfsd layouts
  SUNRPC: Remove unused callback xpo_adjust_wspace()
  SUNRPC: Change TCP socket space reservation
  SUNRPC: Add a server side per-connection limit
  SUNRPC: Micro optimisation for svc_data_ready
  SUNRPC: Call the default socket callbacks instead of open coding
  SUNRPC: lock the socket while detaching it
  ...

Pull more btrfs updates from Chris Mason:
 "This is part two of my btrfs pull, which is some cleanups and a batch
  of fixes.

  Most of the code here is from Jeff Mahoney, making the pointers we
  pass around internally more consistent and less confusing overall.  I
  noticed a small problem right before I sent this out yesterday, so I
  fixed it up and re-tested overnight"

* 'for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (40 commits)
  Btrfs: fix __MAX_CSUM_ITEMS
  btrfs: btrfs_abort_transaction, drop root parameter
  btrfs: add btrfs_trans_handle->fs_info pointer
  btrfs: btrfs_relocate_chunk pass extent_root to btrfs_end_transaction
  btrfs: convert nodesize macros to static inlines
  btrfs: introduce BTRFS_MAX_ITEM_SIZE
  btrfs: cleanup, remove prototype for btrfs_find_root_ref
  btrfs: copy_to_sk drop unused root parameter
  btrfs: simpilify btrfs_subvol_inherit_props
  btrfs: tests, use BTRFS_FS_STATE_DUMMY_FS_INFO instead of dummy root
  btrfs: tests, require fs_info for root
  btrfs: tests, move initialization into tests/
  btrfs: btrfs_test_opt and friends should take a btrfs_fs_info
  btrfs: prefix fsid to all trace events
  btrfs: plumb fs_info into btrfs_work
  btrfs: remove obsolete part of comment in statfs
  btrfs: hide test-only member under ifdef
  btrfs: Ratelimit "no csum found" info message
  btrfs: Add ratelimit to btrfs printing
  Btrfs: fix unexpected balance crash due to BUG_ON
  ...

Pull UBI/UBIFS updates from Richard Weinberger:
 "This contains mostly cleanups and minor improvements of UBI and UBIFS"

* tag 'upstream-4.8-rc1' of git://git.infradead.org/linux-ubifs:
  ubi: Use bitmaps in Fastmap self-check code
  ubi: Be more paranoid while seaching for the most recent Fastmap
  ubi: Check whether the Fastmap anchor matches the super block
  ubi: Rework Fastmap attach base code
  ubi: Fix whitespace issue in count_fastmap_pebs()
  ubi: Introduce vol_ignored()
  ubi: Fix scan_fast() comment
  ubifs: switch_gc_head: Remove redondant sync of wbuf
  ubi: Make volume resize power cut aware
  ubi: Fix early logging
  ubi: gluebi: Fix double refcounting
  ubifs: Silence early error messages if MS_SILENT is set
  ubi: Fix race condition between ubi device creation and udev
  ubifs: Update comment for ubifs_errc
  ubi: Only read necessary size when reading the VID header
  ubifs: Make xattr structures static
  ubifs: Silence error output if MS_SILENT is set

Pull UML updates from Richard Weinberger:
 "Beside of various fixes this also contains patches to enable features
  such was Kcov, kmemleak and TRACE_IRQFLAGS_SUPPORT on UML"

* 'for-linus-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  hostfs: Freeing an ERR_PTR in hostfs_fill_sb_common()
  um: Support kcov
  um: Enable TRACE_IRQFLAGS_SUPPORT
  um: Use asm-generic/irqflags.h
  um: Fix possible deadlock in sig_handler_common()
  um: Select HAVE_DEBUG_KMEMLEAK
  um: Setup physical memory in setup_arch()
  um: Eliminate null test after alloc_bootmem

Pull parisc updates from Helge Deller:

 - added an optimized hash implementation for parisc (George Spelvin)

 - C99 style cleanups in iomap.c (Amitoj Kaur Chawla)

 - added breaks to switch statement in PDC function (noticed by Dan
   Carpenter)

* 'parisc-4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Change structure intialisation to C99 style in iomap.c
  parisc: Add break statements to pdc_pat_io_pci_cfg_read()
  parisc: Add <asm/hash.h>

Pull m68knommu updates from Greg Ungerer:
 "This series is all about Nicolas flat format support for MMU systems.

  Traditional m68k no-MMU flat format binaries can now be run on m68k
  MMU enabled systems too.  The series includes some nice cleanups of
  the binfmt_flat code and converts it to using proper user space
  accessor functions.

  With all this in place you can boot and run a complete no-MMU flat
  format based user space on an MMU enabled system"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k: enable binfmt_flat on systems with an MMU
  binfmt_flat: allow compressed flat binary format to work on MMU systems
  binfmt_flat: add MMU-specific support
  binfmt_flat: update libraries' data segment pointer with userspace accessors
  binfmt_flat: use clear_user() rather than memset() to clear .bss
  binfmt_flat: use proper user space accessors with old relocs code
  binfmt_flat: use proper user space accessors with relocs processing code
  binfmt_flat: clean up create_flat_tables() and stack accesses
  binfmt_flat: use generic transfer_args_to_stack()
  elf_fdpic_transfer_args_to_stack(): make it generic
  binfmt_flat: prevent kernel dammage from corrupted executable headers
  binfmt_flat: convert printk invocations to their modern form
  binfmt_flat: assorted cleanups
  m68k: use same start_thread() on MMU and no-MMU
  m68k: fix file path comment
  m68k: fix bFLT executable running on MMU enabled systems

We changed this around in f135af1041f ('nfsd: reorganize nfsd_create')
so "dchild" can't be an error pointer any more.  Also, dchild can't be
NULL here (and dput would already handle this even if it was).
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

We need an fh_verify to make sure we at least have a dentry, but actual
permission checks happen later.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Minor cleanup, no change in behavior.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

vfs_{create,mkdir,mknod} each begin with a call to may_create(), which
returns EEXIST if the object already exists.

This check is therefore unnecessary.

(In the NFSv2 case, nfsd_proc_create also has such a check.  Contrary to
RFC 1094, our code seems to believe that a CREATE of an existing file
should succeed.  I'm leaving that behavior alone.)
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

There's some odd logic in nfsd_create() that allows it to be called with
the parent directory either locked or unlocked.  The only already-locked
caller is NFSv2's nfsd_proc_create().  It's less confusing to split out
the unlocked case into a separate function which the NFSv2 code can call
directly.

Also fix some comments while we're here.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Create and other nfsd ops generally assume we can call lookup_one_len on
inodes with S_IFDIR set.  Al says that this assumption isn't true in
general, though it should be for the filesystem objects nfsd sees.

Add a check just to make sure our assumption isn't violated.

Remove a couple checks for i_op->lookup in create code.

Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

lookup_one_len already has this check.

The only effect of this patch is to return access instead of perm in the
0-length-filename case.  I actually prefer nfserr_perm (or _inval?), but
I doubt anyone cares.

The isdotent check seems redundant too, but I worry that some client
might actually care about that strange nfserr_exist error.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

When doing a create (mkdir/mknod) on a name, it's worth
checking the name exists first before returning EACCES in case
the directory is not writeable by the user.
This makes return values on the client more consistent
regardless of whenever the entry there is cached in the local
cache or not.
Another positive side effect is certain programs only expect
EEXIST in that case even despite POSIX allowing any valid
error to be returned.
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

The LNKGET based atomic sequence in __cmpxchg_u32 has slightly incorrect
constraints for the return value which under certain circumstances can
allow an address unit register to be used as the first operand of a CMP
instruction. This isn't a valid instruction however as the encodings
only allow a data unit to be specified. This would result in an
assembler error like the following:

  Error: failed to assemble instruction: "CMP A0.2,D0Ar6"

Fix by changing the constraint from "=&da" (assigned, early clobbered,
data or address unit register) to "=&d" (data unit register only).

The constraint for the second operand, "bd" (an op2 register where op1
is a data unit register and the instruction supports O2R) is already
correct assuming the first operand is a data unit register.

Other cases of CMP in inline asm have had their constraints checked, and
appear to all be fine.

Fixes: 6006c0d8 ("metag: Atomics, locks and bitops")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-metag@vger.kernel.org
Cc: <stable@vger.kernel.org> # 3.9.x-

buf[0] is an unsigned char.  touch_nr is an int.  The test for negative
here doesn't make sense so I have removed it.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The newly added sis_i2c driver fails to link without the CRC_ITU_T
driver enabled:

drivers/input/touchscreen/sis_i2c.o: In function `sis_ts_irq_handler':
sis_i2c.c:(.text+0xc0): undefined reference to `crc_itu_t'

This adds a Kconfig select statement.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: a485cb03 ("Input: add driver for SiS 9200 family I2C touchscreen controllers")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>