- 29 Jan, 2009 40 commits
-
-
Chatre, Reinette authored
We encountered a problem related to this BUG and need to obtain more debugging information. See bug report at http://marc.info/?l=linux-wireless&m=123147215829854&w=2Signed-off-by:
Reinette Chatre <reinette.chatre@intel.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Winkler, Tomas authored
This patch removes iwl3945_scan_cancel and iwl3945_scan_cancel_timeout because iwl_scan_cancel iwl_scan_cancel_timeout are just same. Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
-
Winkler, Tomas authored
This patch fix iwl_mac_set_key function changed in patch "mac80211: clean up set_key callback" 1. removing 'static' const u8 *addr' that can possible cause conflict when two or more NICs are present in the system. 2. simplifying functions Signed-off-by:
-
Winkler, Tomas authored
This patch rearrange code in iwl-power.c function to make it a little more readable. No functional changes. Signed-off-by:
-
Jouni Malinen authored
The separate Association Comeback Time IE was removed from IEEE 802.11w and the Timeout Interval IE (from IEEE 802.11r) is used instead. The editing on this is still somewhat incomplete in IEEE 802.11w/D7.0, but still, the use of Timeout Interval IE is the expected mechanism. Signed-off-by:
Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by:
-
Bob Copeland authored
mac80211 now takes down interfaces automatically during suspend so doing it in the driver is unnecessary. Signed-off-by:
Bob Copeland <me@bobcopeland.com> Signed-off-by:
-
Bob Copeland authored
This patch introduces suspend and resume callbacks to mac80211, allowing mac80211 to quiesce its state (bringing down interfaces, removing keys, etc) in preparation for suspend. cfg80211 will call the suspend hook before the device suspend, and resume hook after the device resume. Signed-off-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Johannes Berg authored
This should help implement suspend/resume in mac80211, these hooks will be run before the device is suspended and after it resumes. Therefore, they can touch the hardware as much as they want to. Signed-off-by:
-
Jouni Malinen authored
ADDBA request Action frame was sent out before 4-way handshake was completed and the initial 802.11w code ended up dropping the frame even if MFP was not enabled. While the sending of Action frames this early is not really a good idea (will break with MFP enabled), we should not break this for the MFP disabled case. This patch fixes ieee80211_tx_h_select_key() not to drop management frames if MFP is disabled. If MFP is enabled, Action frames will be dropped before keys are set per IEEE 802.11w/D7.0. Other robust management frames (i.e., Deauthentication and Disassociation frames) are allowed unprotected prior to key configuration. Signed-off-by:
-
Helmut Schaa authored
Currently iwlagn is not able to report hw-killswitch events while the interface is down. This has implications on user space tools (like NetworkManager) relying on rfkill notifications to bring the interface up once the wireless gets enabled through a hw killswitch. Thus, enable the device already in iwl_pci_probe instead of iwl_up and enable interrups while the interface is down in order to get notified about killswitch state changes. The firmware loading is still done in iwl_up. Signed-off-by:
Helmut Schaa <helmut.schaa@googlemail.com> Acked-by:
-
Helmut Schaa authored
Fix the following warnings if compiled without CONFIG_IWLWIFI_DEBUG. drivers/net/wireless/iwlwifi/iwl3945-base.c: In function ‘iwl3945_rx_reply_add_sta’: drivers/net/wireless/iwlwifi/iwl3945-base.c:2748: warning: unused variable ‘pkt’ drivers/net/wireless/iwlwifi/iwl3945-base.c: In function ‘iwl3945_rx_scan_results_notif’: drivers/net/wireless/iwlwifi/iwl3945-base.c:2903: warning: unused variable ‘notif’ drivers/net/wireless/iwlwifi/iwl3945-base.c: In function ‘iwl3945_rx_scan_complete_notif’: drivers/net/wireless/iwlwifi/iwl3945-base.c:2928: warning: unused variable ‘scan_notif’ Signed-off-by:
Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by:
-
Rami Rosen authored
This patch fixes the documentation of mesh_nexthop_lookup() in mesh_hwmp.c. Signed-off-by:
Rami Rosen <ramirose@gmail.com> Signed-off-by:
-
Rami Rosen authored
This patch fixes documentation of enum mesh_path_flags in mesh.h. Signed-off-by:
-
Rami Rosen authored
This patch removes mesh_plink_close() method as it is unused. Signed-off-by:
-
Wei Yongjun authored
Transform calls kmalloc/memset to a single kcalloc. Signed-off-by:
Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by:
-
Roel Kluin authored
To notice a negative keytype Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Acked-by:
-
Ivo van Doorn authored
When the led mode is asus, the activity led mode must be registered otherwise the second LED will not be enabled. Signed-off-by:
Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by:
-
Ivo van Doorn authored
conf_tx() in rt61pci and rt73usb only have to check once if the queue_idx indicates a non-WMM queue and break of the function immediately if that is the case. Only the WMM queues need to have the TX configuration written to the registers. Signed-off-by:
-
Ivo van Doorn authored
Signed-off-by:
-
Andrey Borzenkov authored
Since driver now lives in separate subdirectory, move Kconfig entries in own file so they can be tweaked indepndently. It complements "orinoco: Move sources to a subdirectory". Signed-off-by:
Andrey Borzenkov <arvidjaar@mail.ru> Acked-by:
Pavel Roskin <proski@gnu.org> Signed-off-by:
-
Christian Lamparter authored
On Friday 16 January 2009 20:33:43 Kalle Valo wrote: > N800 and N810 support is not on mainline yet, for stlc45xx I decided > to add module parameters for the gpio numbers. Here's the commit from > stlc45xx repo: > > http://gitorious.org/projects/stlc45xx/repos/mainline/commits/35afc5df0027d02d49e6f5bf986dcc4deb4ee6cf This is the same patch for p54spi. It removes all N800/N810 specific code from p54spi, so the driver can be used on other architectures, or configurations as well. Signed-off-by:
Christian Lamparter <chunkeey@web.de> Signed-off-by:
-
Christian Lamparter authored
A recent change in the usb core "USB: change interface to usb_lock_device_for_reset()" conflicts with "p54usb: utilize usb_reset_device for 3887". Sadly, we have to call usb_reset_device before we can upload the firmware on 3887. Unless someone figures out how to reliably stop the 3887 so the hardware is still usable next time we want to start it. Signed-off-by:
-
Sujith authored
The buffer state is already cleared in ATH_TXBUF_RESET. Remove redundant code clearing the type variable. Signed-off-by:
Sujith <Sujith.Manoharan@atheros.com> Signed-off-by:
-
Sujith authored
This patch cleans up the convoluted buffer management logic for TX aggregation. Both aggregation creation and completion are addressed. Signed-off-by:
-
Sujith authored
If the current holding descriptor is the last one in the TX queue, *and* it has been marked as STALE, then move it to the free list and bail out, as it has already been processed. Signed-off-by:
-
Sujith authored
Signed-off-by:
-
Sujith authored
The TX queue draining routines have confusing names, rename them approprately and merge ath_drain_txdataq() with ath_drain_all_txq(). Signed-off-by:
-
Sujith authored
Signed-off-by:
-
Sujith authored
This patch starts cleaning up all the crufty code in transmission path, grouping functions into logical blocks. Signed-off-by:
-
Sujith authored
The rate control algorithm needs to know if a STA allows short guard interval, fixing this allows RC to use the correct table. Signed-off-by:
-
Sujith authored
Calculation of rate indices from ratecode is done in recv.c in a straightforward manner for both HT and legacy rates. This variable is not needed anymore. Signed-off-by:
-
Jouni Malinen authored
A new nl80211 command, NL80211_CMD_SET_MGMT_EXTRA_IE, can be used to add arbitrary IE data into the end of management frames. The interface allows extra IEs to be configured for each management frame subtype, but only some of them (ProbeReq, ProbeResp, Auth, (Re)AssocReq, Deauth, Disassoc) are currently accepted in mac80211 implementation. This makes it easier to implement IEEE 802.11 extensions like WPS and FT that add IE(s) into some management frames. In addition, this can be useful for testing and experimentation purposes. Signed-off-by:
-
Gabor Juhos authored
Because we have support for the AR9100 devices now, we can enable them. Changes-licensed-under: ISC Signed-off-by:
Gabor Juhos <juhosg@openwrt.org> Signed-off-by:
Imre Kaloz <kaloz@openwrt.org> Tested-by:
-
Gabor Juhos authored
In 'ath9k_ani_reset' the 'ahp->ah_curani' will be initialized only if 'DO_ANI(ah)' true. In 'ath9k_hw_ani_monitor' we are using 'ahp->ah_curani' unconditionally, and it will cause a NULL pointer dereference on AR9100. Changes-licensed-under: ISC Signed-off-by:
-
Gabor Juhos authored
Writing the register at offset 0x98c4 causes a deadlock on the AR913x SoCs. Although i don't have detailed knowledge about these registers, but if i change the register offset according to the 'ar5416Addac' table, it works. Additionally there is no reference to the 0x98c4 elsewhere. Changes-licensed-under: ISC Signed-off-by:
-
Gabor Juhos authored
The RTC register offsets don't fit into 'u16' on the AR913x, so we have to remove the existing casts. Changes-licensed-under: ISC Signed-off-by:
-
Gabor Juhos authored
On the AR913x SOCs we have to provide EEPROM contents via platform_data, because accessing the flash via MMIO is not safe. Additionally different boards may store the radio calibration data at different locations. Changes-licensed-under: ISC Signed-off-by:
-
Gabor Juhos authored
This patch adds the platform_driver itself, and modifies the main driver to register it. Changes-licensed-under: ISC Signed-off-by:
-
Gabor Juhos authored
Now that we have converted all bus specific routines to replaceable, we can move the PCI specific codes into a separate file. Changes-licensed-under: ISC Signed-off-by:
-
Gabor Juhos authored
We have left only some PCI specific cleanup code. We have to convert them as well. Changes-licensed-under: ISC Signed-off-by:
-
