- 26 Jul, 2019 17 commits
-
-
Sean Paul authored
Fixes the following warnings: ../drivers/gpu/drm/drm_dp_mst_topology.c:1593: warning: Excess function parameter 'drm_connector' description in 'drm_dp_mst_connector_late_register' ../drivers/gpu/drm/drm_dp_mst_topology.c:1613: warning: Excess function parameter 'drm_connector' description in 'drm_dp_mst_connector_early_unregister' ../drivers/gpu/drm/drm_dp_mst_topology.c:1594: warning: Function parameter or member 'connector' not described in 'drm_dp_mst_connector_late_register' ../drivers/gpu/drm/drm_dp_mst_topology.c:1614: warning: Function parameter or member 'connector' not described in 'drm_dp_mst_connector_early_unregister' Fixes: 562836a2 ("drm/dp_mst: Enable registration of AUX devices for MST ports") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Lyude Paul <lyude@redhat.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Reviewed-by:
Lyude Paul <lyude@redhat.com> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190726142057.224121-1-sean@poorly.run
-
Sean Paul authored
Now that we use the drm psr helpers, we no longer need to hand-roll our atomic_commit_tail implementation. So use the helper Changes in v2: - None Changes in v3: - None Changes in v4: - None Changes in v5: - None Link to v1: https://patchwork.freedesktop.org/patch/msgid/20190228210939.83386-6-sean@poorly.run Link to v2: https://patchwork.freedesktop.org/patch/msgid/20190326204509.96515-5-sean@poorly.run Link to v3: https://patchwork.freedesktop.org/patch/msgid/20190502194956.218441-11-sean@poorly.run Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-12-sean@poorly.run Cc: Zain Wang <wzz@rock-chips.com> Cc: Tomasz Figa <tfiga@chromium.org> Tested-by:
Heiko Stuebner <heiko@sntech.de> Reviewed-by:
-
Sean Paul authored
Instead of fully disabling and re-enabling the vop on self refresh transitions, only disable the active windows. This will speed up self refresh exits substantially and is still a power-savings win. This patch integrates portions of Zain's patch from here: https://patchwork.kernel.org/patch/9615063/ Changes in v2: - None Changes in v3: - None Changes in v4: - Adjust for preceding vop_win_disable changes Changes in v5: - None Link to v1: https://patchwork.freedesktop.org/patch/msgid/20190228210939.83386-5-sean@poorly.run Link to v2: https://patchwork.freedesktop.org/patch/msgid/20190326204509.96515-4-sean@poorly.run Link to v3: https://patchwork.freedesktop.org/patch/msgid/20190502194956.218441-10-sean@poorly.run Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-11-sean@poorly.run Cc: Zain Wang <wzz@rock-chips.com> Cc: Tomasz Figa <tfiga@chromium.org> Cc: Kristian H. Kristensen <hoegsberg@chromium.org> Tested-by:
-
Sean Paul authored
Change the argument to vop_win_disable to vop_win to accomodate future changes to the function. Changes in v4: - Added to the patchset Changes in v5: - None Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-10-sean@poorly.runTested-by:
-
Sean Paul authored
Instead of rolling our own implementation for tracking when PSR should be [in]active, use the new self refresh helpers to do the heavy lifting. Changes in v2: - updated to reflect changes made in the helpers Changes in v3: - use the new atomic hooks to inspect crtc state instead of needing conn state (Daniel) Changes in v4: - Use Laurent's get_new_connector_for_encoder helper (Daniel) - Exit vop disable early if it's already off Changes in v5: - Rebase on latest drm-misc-next - Resolve conflict with s/edp_vsc_psr/dp_sdp/ rename - Resolve conflict with drm_atomic.h header inclusion Link to v1: https://patchwork.freedesktop.org/patch/msgid/20190228210939.83386-4-sean@poorly.run Link to v2: https://patchwork.freedesktop.org/patch/msgid/20190326204509.96515-3-sean@poorly.run Link to v3: https://patchwork.freedesktop.org/patch/msgid/20190502194956.218441-9-sean@poorly.run Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-9-sean@poorly.run Cc: Zain Wang <wzz@rock-chips.com> Cc: Tomasz Figa <tfiga@chromium.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by:
-
Sean Paul authored
Once we start shutting off the link during PSR, we're going to want fast training to work. If the display doesn't support fast training, don't enable psr. Changes in v2: - None Changes in v3: - None Changes in v4: - None Changes in v5: - None Link to v1: https://patchwork.freedesktop.org/patch/msgid/20190228210939.83386-3-sean@poorly.run Link to v2: https://patchwork.freedesktop.org/patch/msgid/20190326204509.96515-2-sean@poorly.run Link to v3: https://patchwork.freedesktop.org/patch/msgid/20190502194956.218441-9-sean@poorly.run Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-8-sean@poorly.run Cc: Zain Wang <wzz@rock-chips.com> Cc: Tomasz Figa <tfiga@chromium.org> Tested-by:
-
Guido Günther authored
We were already using the generic functions in our debugfs code, do the same in jh057n_shutdown. This was suggested by Sam Ravnborg. Signed-off-by:
Guido Günther <agx@sigxcpu.org> Reviewed-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
Guido Günther authored
Most of them had these already but two mere missing. This eases debugging. Signed-off-by:
-
Guido Günther authored
This makes it symmetric with the panel init happening in enable(). Signed-off-by:
-
Guido Günther authored
If the panel is wrapped in a panel_bridge it gets prepar()ed before the upstream DSI bridge which can cause hangs (e.g. with imx-nwl since clocks are not enabled yet). To avoid this move the panel's first DSI access to enable() so the upstream bridge can prepare the DSI host controller in it's pre_enable(). This is also in line with other panel drivers. Signed-off-by:
-
Douglas Anderson authored
In the patch ("video: of: display_timing: Don't yell if no timing node is present") we'll stop spouting an error directly in of_get_display_timing() if no node is present. Presumably amba-clcd should take charge of spouting its own error now. NOTE: we'll print two errors if the node was present but there were problems parsing the timing node (one in of_parse_display_timing() and this new one). Since this is a fatal error for the driver's probe (and presumably someone will be debugging), this should be OK. Signed-off-by:Douglas Anderson <dianders@chromium.org> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: David Airlie <airlied@linux.ie> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190722182439.44844-5-dianders@chromium.org
-
Douglas Anderson authored
In the patch ("video: of: display_timing: Don't yell if no timing node is present") we'll stop spouting an error directly in of_get_display_timing() if no node is present. Presumably panel-lvds should take charge of spouting its own error now. NOTE: we'll print two errors if the node was present but there were problems parsing the timing node (one in of_parse_display_timing() and this new one). Since this is a fatal error for the driver's probe (and presumably someone will be debugging), this should be OK. Signed-off-by: -
Douglas Anderson authored
There may be cases (like in panel-simple.c) where we have a sane fallback if no timings are specified in the device tree. Let's get rid of the unconditional pr_err(). We can add error messages in individual drivers if it makes sense. NOTE: we'll still print errors if the node is present but there are problems parsing the timings. Fixes: b8a2948f ("drm/panel: simple: Add ability to override typical timing") Reported-by:
-
Douglas Anderson authored
From code inspection it can be seen that of_get_display_timing() is lacking an of_node_put(). Add it. Fixes: ffa3fd21 ("videomode: implement public of_get_display_timing()") Signed-off-by:
-
Jeffrey Hugo authored
The Sharp LD-D5116Z01B is a 12.3" eDP panel with a 1920X1280 resolution. Signed-off-by:
Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Reviewed-by:
-
Jeffrey Hugo authored
The Sharp LD-D5116Z01B is a 12.3" eDP panel with a 1920X1280 resolution. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Navid Emamdoost authored
The following function calls may fail and return NULL, so the null check is added. of_graph_get_next_endpoint of_graph_get_remote_port_parent of_graph_get_remote_port Update: Thanks to Sam Ravnborg, for suggession on the use of goto to avoid leaking endpoint. Signed-off-by:
Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by:
-
- 25 Jul, 2019 23 commits
-
-
Yue Hu authored
Since governor name is defined by DEVFREQ framework internally, use the macro definition instead of using the name directly. Signed-off-by:
Yue Hu <huyue2@yulong.com> Reviewed-by:
Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Jordan Crouse <jcrouse@codeaurora.org> for the msm part. Signed-off-by:
-
Steven Price authored
Midgard/Bifrost GPUs have a bunch of feature registers providing details of what the hardware supports. Panfrost already reads these, this patch exports them all to user space so that the jobs created by the user space driver can be tuned for the particular hardware implementation. Signed-off-by:
Steven Price <steven.price@arm.com> Reviewed-by:
Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Signed-off-by:
-
Leo Li authored
Implement late_register and early_unregister hooks for MST connectors. Call drm helpers for MST connector registration, which registers the AUX devices. Cc: Jerry Zuo <Jerry.Zuo@amd.com> Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Signed-off-by:
Leo Li <sunpeng.li@amd.com> Reviewed-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by:
Harry Wentland <harry.wentland@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190723232808.28128-10-sunpeng.li@amd.com
-
Leo Li authored
Set the connector's kernel device as the parent for the aux kernel device. This allows udev rules to access connector attributes when creating symlinks to aux devices. For example, the following udev rule: SUBSYSTEM=="drm_dp_aux_dev", SUBSYSTEMS=="drm", ATTRS{edid}=="*", SYMLINK+="drm_dp_aux/by-name/$id" Will create the following symlinks using the connector's name: $ ls /dev/drm_dp_aux/by-name/ card0-DP-1 card0-DP-2 card0-DP-3 Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Cc: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Signed-off-by: -
Leo Li authored
Set the connector's kernel device as the parent for the aux kernel device. This allows udev rules to access connector attributes when creating symlinks to aux devices. Cc: Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Ville Syrjälä authored
All available downstream ports - physical and logical - are exposed for each MST device. They are listed in /dev/, following the same naming scheme as SST devices by appending an incremental ID. Although all downstream ports are exposed, only some will work as expected. Consider the following topology: +---------+ | ASIC | +---------+ Conn-0| | +----v----+ +----| MST HUB |----+ | +---------+ | | | |Port-1 Port-2| +-----v-----+ +-----v-----+ | MST | | SST | | Display | | Display | +-----------+ +-----------+ |Port-1 x MST Path | MST Device ----------+---------------------------------- sst:0 | MST Hub mst:0-1 | MST Display mst:0-1-1 | MST Display's disconnected DP out mst:0-1-8 | MST Display's internal sink mst:0-2 | SST Display On certain MST displays, the upstream physical port will ACK DPCD reads. However, reads on the local logical port to the internal sink will *NAK*. i.e. reading mst:0-1 ACKs, but mst:0-1-8 NAKs. There may also be duplicates. Some displays will return the same GUID when reading DPCD from both mst:0-1 and mst:0-1-8. There are some device-dependent behavior as well. The MST hub used during testing will actually *ACK* read requests on a disconnected physical port, whereas the MST displays will NAK. In light of these discrepancies, it's simpler to expose all downstream ports - both physical and logical - and let the user decide what to use. v3 changes: * Change WARN_ON_ONCE -> DRM_ERROR on dpcd read errors * Docstring and cosmetic fixes v2 changes: Moved remote aux device (un)registration to new mst connector late register and early unregister helpers. Drivers should call these from their own mst connector function hooks. This is to solve an issue during driver unload, where mst connector devices are unregistered before the remote aux devices are. In a setup where aux devices are created as children of connector devices, the aux device would be removed too early, and uncleanly. Doing so in early_unregister solves this issue, as that is called before connector unregistration. Signed-off-by:Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Leo Li authored
In preparation for adding aux devices for DP MST, make the IDR non-cyclic. That way, hotplug cycling MST devices won't needlessly increment the minor version index. Signed-off-by:
-
Sam Ravnborg authored
Drop use of the deprecated drmP.h header. While touching the files divide include files in blocks and sort the files alphabetically. v2: - Replace all uses of DRM_WAIT_ON() with VIA_WAIT_ON() and thus avoiding to pull in drm_os_linux.h v3: - DRM_WAIT_ON replacement moved to earlier patch (Emil) Signed-off-by:
Emil Velikov <emil.velikov@collabora.com> Cc: Kevin Brace <kevinbrace@gmx.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: "Gustavo A. R. Silva" <gustavo@embeddedor.com> Cc: Mike Marshall <hubcap@omnibond.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Michel Dänzer <michel@daenzer.net> Link: https://patchwork.freedesktop.org/patch/msgid/20190723200944.17285-5-sam@ravnborg.org
-
Sam Ravnborg authored
Added include of header files to make via_drv.h self-contained. v3: - Reworded changelog a little - to reflect that more than one header files are added Signed-off-by:
-
Sam Ravnborg authored
VIA_WAIT_ON() is a direct copy of DRM_WAIT_ON() from drm_os_linux.h. The copy is made so we can avoid the dependency on the legacy header. A more involved approach had been to introduce wait_event_* but for this legacy driver the simpler and more safe approach with a copy of the macro was selected. Added the relevant header files for the functions used in VIA_WAIT_ON. v3: - Updated users of DRM_WAIT_ON => VIA_WAIT_ON (Emil) - Updated $subject (Emil) Signed-off-by:
-
Sam Ravnborg authored
The DRM_READ, DRM_WRITE macros comes from the deprecated drm_os_linux.h header file. Remove their use to remove this dependency. Replace the use of the macros with static inline variants. v4: - Use a more standard via_write8_mask() function (Emil) v3: - Use static inline functions, rather than macros (Emil) - Use dedicated mask variants for byte access (Emil) Signed-off-by:
-
Olivier Moysan authored
Implement get_dai_id callback of audio HDMI codec to support ASoC audio graph card. HDMI audio output has to be connected to sii902x port 3. get_dai_id callback maps this port to ASoC DAI index 0. Signed-off-by:
Olivier Moysan <olivier.moysan@st.com> Reviewed-by:
Philippe Cornu <philippe.cornu@st.com> Acked-by:
Andrzej Hajda <a.hajda@samsung.com> Reviewed-by:
Jyri Sarha <jsarha@ti.com> Signed-off-by:
Benjamin Gaignard <benjamin.gaignard@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/1562141052-26221-1-git-send-email-olivier.moysan@st.com
-
Olivier Moysan authored
The master clock on i2s bus is not mandatory, as sii902X internal PLL can be used instead. Make use of mclk optional. Signed-off-by:
-
Olivier Moysan authored
As stated in SiL9022/24 datasheet, master clock is not required for I2S. Make mclk property optional in DT bindings. Fixes: 3f18021f ("dt-bindings: display: sii902x: Add HDMI audio bindings") Signed-off-by:
-
Olivier Moysan authored
Add devm_clk_get call to retrieve reference to master clock. Fixes: ff578163 ("drm/bridge: sii902x: Implement HDMI audio support") Signed-off-by:
-
Ahmad Fatoum authored
To properly synchronize with other devices the fence from the GEM object backing the framebuffer needs to be attached to the atomic state, so the commit work can wait on fence signaling. Signed-off-by:
Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Acked-by:
-
Noralf Trønnes authored
tinydrm is just a collection of tiny drivers now. Add T: drm-misc entry for tinydrm drivers that lacks it. Cc: David Lechner <david@lechnology.com> Reviewed-by:
Noralf Trønnes <noralf@tronnes.org> Acked-by:
David Lechner <david@lechnology.com> Acked-by:
Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20190722104312.16184-10-noralf@tronnes.org
-
Noralf Trønnes authored
This moves mipi-dbi to be a core helper with the name drm_mipi_dbi. Fixup include's in drivers. Move the docs entry and delete tinydrm.rst. Delete the last tinydrm todo entry. v2: Make DRM_MIPI_DBI tristate to enable it being built as a module. Cc: Eric Anholt <eric@anholt.net> Cc: David Lechner <david@lechnology.com> Reviewed-by:
-
Noralf Trønnes authored
mipi-dbi uses several KMS helper functions but that build dependency is not expressed. Select DRM_KMS_HELPER to fix that. Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
-
Noralf Trønnes authored
The mipi_dbi helper is missing a dependency on DRM_KMS_HELPER and putting that in revealed this problem: drivers/video/fbdev/Kconfig:12:error: recursive dependency detected! drivers/video/fbdev/Kconfig:12: symbol FB is selected by DRM_KMS_FB_HELPER drivers/gpu/drm/Kconfig:75: symbol DRM_KMS_FB_HELPER depends on DRM_KMS_HELPER drivers/gpu/drm/Kconfig:69: symbol DRM_KMS_HELPER is selected by TINYDRM_MIPI_DBI drivers/gpu/drm/tinydrm/Kconfig:11: symbol TINYDRM_MIPI_DBI is selected by TINYDRM_HX8357D drivers/gpu/drm/tinydrm/Kconfig:15: symbol TINYDRM_HX8357D depends on BACKLIGHT_CLASS_DEVICE drivers/video/backlight/Kconfig:144: symbol BACKLIGHT_CLASS_DEVICE is selected by FB_BACKLIGHT drivers/video/fbdev/Kconfig:187: symbol FB_BACKLIGHT depends on FB A symbol that selects DRM_KMS_HELPER can not depend on BACKLIGHT_CLASS_DEVICE. The reason for this is that DRM_KMS_FB_HELPER selects FB instead of depending on it. The tinydrm drivers have somehow gotten away with depending on BACKLIGHT_CLASS_DEVICE because DRM_TINYDRM selects DRM_KMS_HELPER and the drivers depend on that symbol. An audit shows that all DRM drivers that select DRM_KMS_HELPER and use BACKLIGHT_CLASS_DEVICE, selects it: DRM_TILCDC, DRM_GMA500, DRM_SHMOBILE, DRM_NOUVEAU, DRM_FSL_DCU, DRM_I915, DRM_RADEON, DRM_AMDGPU, DRM_PARADE_PS8622 Documentation/kbuild/kconfig-language.txt has a note regarding select: 1. 'select should be used with care since it doesn't visit dependencies.' This is not a problem since BACKLIGHT_CLASS_DEVICE doesn't have any dependencies. 2. 'In general use select only for non-visible symbols' BACKLIGHT_CLASS_DEVICE is user visible. The real solution to this would be to have DRM_KMS_FB_HELPER depend on the user visible symbol FB. That is a can of worms I'm not willing to tackle. I fear that such a change will result in me handling difficult fallouts for the next weeks. So I'm following DRM suite here. Signed-off-by:
-
Noralf Trønnes authored
mipi-dbi depends on the CMA helper through its use of drm_fb_cma_get_gem_obj(). This is an unnecessary dependency to drag in for drivers that only want to use the MIPI DBI interface part. Avoid this by open coding the function. Signed-off-by:
-
Noralf Trønnes authored
Split struct mipi_dbi into an interface part and a display pipeline part. The interface part can be used by drivers that need to initialize the controller, but that won't upload the framebuffer over this interface. MIPI DBI supports 3 interface types: - A. Motorola 6800 type parallel bus - B. Intel 8080 type parallel bus - C. SPI type with 3 options: I've embedded the SPI type specifics in the mipi_dbi struct to avoid adding unnecessary complexity. If more interface types will be supported in the future, the type specifics might have to be split out. Rename functions to match the new struct mipi_dbi_dev: - drm_to_mipi_dbi() -> drm_to_mipi_dbi_dev(). - mipi_dbi_init*() -> mipi_dbi_dev_init*(). Cc: Eric Anholt <eric@anholt.net> Cc: David Lechner <david@lechnology.com> Reviewed-by:
-
Noralf Trønnes authored
struct mipi_dbi is going to be split into an interface part and a display pipeline part. The interface part can be used by drivers that need to initialize the controller, but that won't upload the framebuffer over this interface. tinydrm uses the variable name 'mipi' but this is not a good name since MIPI refers to a lot of standards. This patch changes the variable name to 'dbidev' where it refers to the pipeline part of struct mipi_dbi. Cc: Eric Anholt <eric@anholt.net> Cc: David Lechner <david@lechnology.com> Reviewed-by:
-
