- 17 Nov, 2005 40 commits
-
-
Greg Kroah-Hartman authored
This lets us remove a lot of code in the drivers that were all checking the same thing. It also found some bugs in a few of the drivers, which has been fixed up. Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Richard Purdie authored
Fix an error in the OHCI lh7a404 driver after the platform device conversion. Signed-off-by:
Richard Purdie <rpurdie@rpsys.net> Signed-off-by:
-
Antti Andreimann authored
This small patch adds a device ID used by older Maxtor OneTouch drives (the ones with blue face-plate instead of the fancy silver one used in newer models). The button on those drives works well with the current driver. From: Antti Andreimann <Antti.Andreimann@mail.ee> Signed-off-by:
-
Andrew Morton authored
drivers/usb/core/devio.c: In function `proc_ioctl_compat': drivers/usb/core/devio.c:1401: warning: passing arg 1 of `compat_ptr' makes integer from pointer without a cast Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Herbert Xu authored
this patch from Herbert Xu fixes a race by moving termination of the URBs into close() exclusively. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Oliver Neukum <oliver@neukum.name> Signed-off-by:
-
Daniel Drake authored
Peter Favrholdt reported that his Kodak flash device was getting detected as a CDROM, and he helped me track this down to the fact that the device takes a long time (approx 440ms!) to reset. This patch increases the delay to 500ms, which solves the problem. Signed-off-by:
Daniel Drake <dsd@gentoo.org> Signed-off-by:
-
Oliver Neukum authored
the scsi layer now uses very short sg lists. This breaks the microtek driver. Here is a patch fixes this and some other issues. Signed-off-by:
-
Luiz Fernando Capitulino authored
Updates pl2303_update_line_status() to handle X75 and SX1 Siemens mobiles Signed-off-by:
Luiz Capitulino <lcapitulino@mandriva.com.br> Signed-off-by:
-
Luiz Fernando Capitulino authored
This patch adds two new Siemens mobiles IDs for the pl2303 driver. Signed-off-by:
-
David Brownell authored
The onetouch support doesn't suspend correctly (leaves an interrupt URB posted, instead of unlinking it) so for now just disable it when PM is in the air. Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Josef Balatka authored
Jablotron usb serial interface identification Signed-off-by:
Josef Balatka <balatka@email.cz> Signed-off-by:
-
Pavel Machek authored
I actually have this device, and kernel reports blacklist entry is no longer neccessary. Signed-off-by:
Pavel Machek <pavel@suse.cz> Signed-off-by:
-
Andrew Morton authored
drivers/usb/core/devio.c: In function `proc_ioctl_compat': drivers/usb/core/devio.c:1401: warning: passing arg 1 of `compat_ptr' makes integer from pointer without a cast NFI if this is correct... Cc: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by:
-
OGAWA Hirofumi authored
Signed-off-by:
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by:
-
Marcel Holtmann authored
This patch deletes the bluetooth.txt help file of the bluetty driver and hands over its major device nodes for character devices to the RFCOMM TTY implementation of the Bluetooth subsystem. Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Dmitry Torokhov authored
USB: fix 'unused variable' warning Signed-off-by:
Dmitry Torokhov <dtor@mail.ru> Signed-off-by:
-
Ping Cheng authored
This patch adds support for Graphire4, Cintiq 710, Intuos3 6x11, etc. and report Device IDs. Signed-off-by:
Ping Cheng <pingc@wacom.com> Signed-off-by:
-
Ping Cheng authored
This patch adds support for Graphire4, Cintiq 710, Intuos3 6x11, etc. Signed-off-by:
-
Greg Kroah-Hartman authored
People are complaining about a .old file in the tree. So rename drivers/usb/serial/ChangeLog.old to ChangeLog.history. Signed-off-by:
-
Greg Kroah-Hartman authored
Signed-off-by:
-
Deepak Saxena authored
Platform device conversion missed a couple of spots. Signed-off-by:
Deepak Saxena <dsaxena@plexity.net> Signed-off-by:
-
-
Linus Torvalds authored
The second __const_sigaddset() should have been a sigdelset.. Compile trouble noted by Greg K-H. Signed-off-by: -
Linus Torvalds authored
-
Linus Torvalds authored
-
Linus Torvalds authored
-
Constantine Gavrilov authored
Due to incomplete memory constraints, gcc would miscompile code with sigaddset on i386 if sig arg was const. A quote form Jakub to make the issue clear: "You need either __asm__("btsl %1,%0" : "+m"(*set) : "Ir"(_sig-1) : "cc"); or __asm__("btsl %1,%0" : "=m"(*set) : "Ir"(_sig-1), "m"(*set) : "cc"); because the btsl instruction doesn't just set the memory to some value, but needs to read its previous content as well. If you don't tell that fact to GCC, GCC is of course free to optimize as if the asm was just setting the value and not depended on the previous value." Signed-off-by: -
Zhu Yi authored
This fixes a slab corruption issue in the ipw2200 driver: it essentially multiplied the error log number _twice_ by the size of the error element entry (once explicitly in the code, and once implicitly as part of the regular pointer arithmetic). Cc: Henrik Brix Andersen <brix@gentoo.org> Cc: Bernard Blackham <bernard@blackham.com.au> Cc: Zilvinas Valinskas <zilvinas@gemtek.lt> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by:
Zhu Yi <yi.zhu@intel.com> Signed-off-by:
-
Pekka Enberg authored
The function ipw_request_direct_scan() should bail out when the device is down. This fixes a lockup caused by wpa_supplicant triggering ipw_request_direct_scan() while the driver was in a middle of a reset due to firmware errors. Thanks to Zilvinas Valinskas for reporting the bug and helping me debug it. Signed-off-by:
Pekka Enberg <penberg@cs.helsinki.fi> Acked-by:
-
Ralf Baechle authored
Signed-off-by:Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
Signed-off-by: -
Ralf Baechle authored
Signed-off-by: -
Ralf Baechle authored
There is no definition for seadint_init() and the unprotected prototype breaks compilation of assembler files. Signed-off-by: -
Ralf Baechle authored
Signed-off-by: -
Ralf Baechle authored
Signed-off-by: -
Ralf Baechle authored
Signed-off-by: -
Ralf Baechle authored
Signed-off-by: -
Ralf Baechle authored
Signed-off-by: -
Ralf Baechle authored
This driver supports the IDE port on the Sibyte Swarm evaluation boards and it's relatives for the BCM1250 family of systems on a chip. Signed-off-by:
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Pantelis Antoniou authored
This is needed to make console output appear with the new driver... Signed-off-by:
-
