- 08 May, 2007 40 commits
-
-
Simon Horman authored
Currently the size of the per-cpu region reserved to save crash notes is set by the per-architecture value MAX_NOTE_BYTES. Which in turn is currently set to 1024 on all supported architectures. While testing ia64 I recently discovered that this value is in fact too small. The particular setup I was using actually needs 1172 bytes. This lead to very tedious failure mode where the tail of one elf note would overwrite the head of another if they ended up being alocated sequentially by kmalloc, which was often the case. It seems to me that a far better approach is to caclculate the size that the area needs to be. This patch does just that. If a simpler stop-gap patch for ia64 to be squeezed into 2.6.21(.X) is needed then this should be as easy as making MAX_NOTE_BYTES larger in arch/asm-ia64/kexec.h. Perhaps 2048 would be a good choice. However, I think that the approach in this patch is a much more robust idea. Acked-by:
Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Ken Chen authored
Remove artificial maximum 256 loop device that can be created due to a legacy device number limit. Searching through lkml archive, there are several instances where users complained about the artificial limit that the loop driver impose. There is no reason to have such limit. This patch rid the limit entirely and make loop device and associated block queue instantiation on demand. With on-demand instantiation, it also gives the benefit of not wasting memory if these devices are not in use (compare to current implementation that always create 8 loop devices), a net improvement in both areas. This version is both tested with creation of large number of loop devices and is compatible with existing losetup/mount user land tools. There are a number of people who worked on this and provided valuable suggestions, in no particular order, by: Jens Axboe Jan Engelhardt Christoph Hellwig Thomas M Signed-off-by:
Ken Chen <kenchen@google.com> Cc: Jan Engelhardt <jengelh@linux01.gwdg.de> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Russell King authored
Instead of having /dev/port support dependent in multiple places on a string of preprocessor symbols, define a new configuration directive for it. This ensures that all four places remain consistent with each other. Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
John Feeney authored
The 82875 EDAC driver enables an otherwise-hidden PCI device, but doesn't register it as a PCI device properly. Therefore, the device list in /proc/bus/pci/devices is different than the tree in /sys/bus/pci. This usually manifests as the X server failing to start, since it expects the two lists to be consistent. Signed-off-by:
Adam Jackson <ajackson@redhat.com> Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Greg KH <greg@kroah.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Doug Thompson <norsk5@xmission.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by:
-
Randy Dunlap authored
Remove includes of <linux/smp_lock.h> where it is not used/needed. Suggested by Al Viro. Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc, sparc64, and arm (all 59 defconfigs). Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Jeremy Fitzhardinge authored
Add touch_all_softlockup_watchdogs() to allow the softlockup watchdog timers on all cpus to be updated. This is used to prevent sysrq-t from generating a spurious watchdog message when generating lots of output. Softlockup watchdogs use sched_clock() as its timebase, which is inherently per-cpu (at least, when it is measuring unstolen time). Because of this, it isn't possible for one CPU to directly update the other CPU's timers, but it is possible to tell the other CPUs to do update themselves appropriately. Signed-off-by:
Jeremy Fitzhardinge <jeremy@xensource.com> Acked-by:
Chris Lalancette <clalance@redhat.com> Signed-off-by:
Prarit Bhargava <prarit@redhat.com> Cc: Rick Lindsley <ricklind@us.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Jeremy Fitzhardinge authored
The softlockup watchdog is currently a nuisance in a virtual machine, since the whole system could have the CPU stolen from it for a long period of time. While it would be unlikely for a guest domain to be denied timer interrupts for over 10s, it could happen and any softlockup message would be completely spurious. Earlier I proposed that sched_clock() return time in unstolen nanoseconds, which is how Xen and VMI currently implement it. If the softlockup watchdog uses sched_clock() to measure time, it would automatically ignore stolen time, and therefore only report when the guest itself locked up. When running native, sched_clock() returns real-time nanoseconds, so the behaviour would be unchanged. Note that sched_clock() used this way is inherently per-cpu, so this patch makes sure that the per-processor watchdog thread initialized its own timestamp. Signed-off-by:
-
john stultz authored
Move the timekeeping code out of kernel/timer.c and into kernel/time/timekeeping.c. I made no cleanups or other changes in transit. [akpm@linux-foundation.org: build fix] Signed-off-by:
John Stultz <johnstul@us.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Eric Dumazet authored
struct clocksource is a critical data structure. Most of its fields are read only, some of them are heavily modified at each timer interrupt. It makes sense to separate those fields and make sure they all share one cache line, or at least the minimum for machines with small cache lines. [akpm@linux-foundation.org: build fix] Signed-off-by:
Eric Dumazet <dada1@cosmosbay.com> Acked-by:
-
Ahmed S. Darwish authored
An irqaction structure won't be added to an IRQ descriptor irqaction list if it doesn't agree with other irqactions on the IRQF_PERCPU flag. Don't check for this flag to change IRQ descriptor `status' for every irqaction added to the list, Doing the check only for the first irqaction added is enough. Signed-off-by:
Ahmed S. Darwish <darwish.07@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Ralf Baechle authored
sysdev.h uses THIS_MODULE so should include <linux/module.h>. [akpm@linux-foundation.org: couple of fixes] Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Cc: Andi Kleen <ak@suse.de> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Venki Pallipadi authored
Add a new deferrable delayed work init. This can be used to schedule work that are 'unimportant' when CPU is idle and can be called later, when CPU eventually comes out of idle. Use this init in cpufreq ondemand governor. Signed-off-by:
Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by:
-
Venki Pallipadi authored
Introduce a new flag for timers - deferrable: Timers that work normally when system is busy. But, will not cause CPU to come out of idle (just to service this timer), when CPU is idle. Instead, this timer will be serviced when CPU eventually wakes up with a subsequent non-deferrable timer. The main advantage of this is to avoid unnecessary timer interrupts when CPU is idle. If the routine currently called by a timer can wait until next event without any issues, this new timer can be used to setup timer event for that routine. This, with dynticks, allows CPUs to be lazy, allowing them to stay in idle for extended period of time by reducing unnecesary wakeup and thereby reducing the power consumption. This patch: Builds this new timer on top of existing timer infrastructure. It uses last bit in 'base' pointer of timer_list structure to store this deferrable timer flag. __next_timer_interrupt() function skips over these deferrable timers when CPU looks for next timer event for which it has to wake up. This is exported by a new interface init_timer_deferrable() that can be called in place of regular init_timer(). [akpm@linux-foundation.org: Privatise a #define] Signed-off-by:
-
David Brownell authored
Update some of the layered parport_driver code to use parport->dev: - i2c-parport (parent of i2c_adapter) - spi_butterfly (parent of spi_master, allowing cruft removal) - lp (creating class_device) - ppdev (parent of parportN device) - tipar (creating class_device) There are still drivers that should be updated, like some of the input drivers; but they won't be any worse off than they are today. Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Cc: Greg KH <greg@kroah.com> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Jean Delvare authored
Give legacy parallel ports a platform device in the device tree. This is a quick and dirty implementation; it doesn't actually convert the legacy parport code to the device driver model (by splitting out probing from device creation). But at least parallel port device drivers will finally have a device to work with. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
David Brownell authored
Currently a parport_driver can't get a handle on the device node for the underlying parport (PNPACPI, PCI, etc). That prevents correct placement of sysfs child nodes, which can affect things like power management. This patch adds a field to "struct parport" pointing to that device node, and updates non-legacy port drivers to initialize that device pointer. That field replaces the analagous PCI-only support in parport_pc. [akpm@linux-foundation.org: fix powerpc build] Signed-off-by:
-
Dmitry Adamushko authored
setup_irq() releases a desc->lock before calling register_handler_proc(), so the iteration over the IRQ action list is not protected. (akpm: the check itself is still racy, but at least it probably won't oops now). Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Robert P. J. Day authored
Delete the unused header file include/linux/awe_voice.h, as well as its corresponding Kbuild entry. Signed-off-by:
Robert P. J. Day <rpjday@mindspring.com> Signed-off-by:
-
Srivatsa Vaddagiri authored
Currently cpuset_exit() changes the exiting task's ->cpuset pointer w/o taking task_lock(). This can lead to ugly races between attach_task and cpuset_exit. Details of the races are described at http://lkml.org/lkml/2007/3/24/132. Patch below closes those races. Signed-off-by:
Srivatsa Vaddagiri <vatsa@in.ibm.com> Cc: Paul Jackson <pj@sgi.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Menage <menage@google.com> Signed-off-by:
-
Adrian Bunk authored
remove_inode_dquot_ref() can now become static. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Acked-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Johannes Berg authored
I was playing with some code that sometimes got a string where a %n match should have been done where the input string ended, for example like this: sscanf("abc123", "abc%d%n", &a, &n); /* doesn't work */ sscanf("abc123a", "abc%d%n", &a, &n); /* works */ However, the scanf function in the kernel doesn't convert the %n in that case because it has already matched the complete input after %d and just completely stops matching then. This patch fixes that. [akpm@linux-foundation.org: cleanups] Signed-off-by:Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Robert P. J. Day authored
Signed-off-by:
-
Adrian Bunk authored
Schedule obsolete OSS drivers for removal. Signed-off-by:
-
Alexey Dobriyan authored
Additions and removal from tty_drivers list were just done as well as iterating on it for /proc/tty/drivers generation. testing: modprobe/rmmod loop of simple module which does nothing but tty_register_driver() vs cat /proc/tty/drivers loop BUG: unable to handle kernel paging request at virtual address 6b6b6b6b printing eip: c01cefa7 *pde = 00000000 Oops: 0000 [#1] PREEMPT last sysfs file: devices/pci0000:00/0000:00:1d.7/usb5/5-0:1.0/bInterfaceProtocol Modules linked in: ohci_hcd af_packet e1000 ehci_hcd uhci_hcd usbcore xfs CPU: 0 EIP: 0060:[<c01cefa7>] Not tainted VLI EFLAGS: 00010297 (2.6.21-rc4-mm1 #4) EIP is at vsnprintf+0x3a4/0x5fc eax: 6b6b6b6b ebx: f6cb50f2 ecx: 6b6b6b6b edx: fffffffe esi: c0354700 edi: f6cb6000 ebp: 6b6b6b6b esp: f31f5e68 ds: 007b es: 007b fs: 00d8 gs: 0033 ss: 0068 Process cat (pid: 31864, ti=f31f4000 task=c1998030 task.ti=f31f4000) Stack: 00000000 c0103f20 c013003a c0103f20 00000000 f6cb50da 0000000a 00000f0e f6cb50f2 00000010 00000014 ffffffff ffffffff 00000007 c0354753 f6cb50f2 f73e39dc f73e39dc 00000001 c0175416 f31f5ed8 f31f5ed4 0ee00000 f32090bc Call Trace: [<c0103f20>] restore_nocheck+0x12/0x15 [<c013003a>] mark_held_locks+0x6d/0x86 [<c0103f20>] restore_nocheck+0x12/0x15 [<c0175416>] seq_printf+0x2e/0x52 [<c0192895>] show_tty_range+0x35/0x1f3 [<c0175416>] seq_printf+0x2e/0x52 [<c0192add>] show_tty_driver+0x8a/0x1d9 [<c01758f6>] seq_read+0x70/0x2ba [<c0175886>] seq_read+0x0/0x2ba [<c018d8e6>] proc_reg_read+0x63/0x9f [<c015e764>] vfs_read+0x7d/0xb5 [<c018d883>] proc_reg_read+0x0/0x9f [<c015eab1>] sys_read+0x41/0x6a [<c0103e4e>] sysenter_past_esp+0x5f/0x99 ======================= Code: 00 8b 4d 04 e9 44 ff ff ff 8d 4d 04 89 4c 24 50 8b 6d 00 81 fd ff 0f 00 00 b8 a4 c1 35 c0 0f 46 e8 8b 54 24 2c 89 e9 89 c8 eb 06 <80> 38 00 74 07 40 4a 83 fa ff 75 f4 29 c8 89 c6 8b 44 24 28 89 EIP: [<c01cefa7>] vsnprintf+0x3a4/0x5fc SS:ESP 0068:f31f5e68 Signed-off-by:Alexey Dobriyan <adobriyan@sw.ru> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
-
Mark Fasheh authored
Remove do_sync_file_range() and convert callers to just use do_sync_mapping_range(). Signed-off-by:
Mark Fasheh <mark.fasheh@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Jiri Slaby authored
cs5535_gpio, add MODULE_DEVICE_TABLE Signed-off-by:
Jiri Slaby <jirislaby@gmail.com> Cc: Ben Gardner <bgardner@wabtec.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
Jiri Slaby authored
rocket, add MODULE_DEVICE_TABLE Signed-off-by:
-
Christoph Hellwig authored
This patch moves the die notifier handling to common code. Previous various architectures had exactly the same code for it. Note that the new code is compiled unconditionally, this should be understood as an appel to the other architecture maintainer to implement support for it aswell (aka sprinkling a notify_die or two in the proper place) arm had a notifiy_die that did something totally different, I renamed it to arm_notify_die as part of the patch and made it static to the file it's declared and used at. avr32 used to pass slightly less information through this interface and I brought it into line with the other architectures. [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: fix vmalloc_sync_all bustage] [bryan.wu@analog.com: fix vmalloc_sync_all in nommu] Signed-off-by:
Christoph Hellwig <hch@lst.de> Cc: <linux-arch@vger.kernel.org> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by:
Bryan Wu <bryan.wu@analog.com> Signed-off-by:
-
Randy Dunlap authored
Fix sparse NULL warnings: kernel/kprobes.c:915:49: warning: Using plain integer as NULL pointer Signed-off-by:
Ananth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by:
-
Randy Dunlap authored
REISER_FS /proc option needs to depend on PROC_FS. fs/reiserfs/procfs.c: In function 'show_super': fs/reiserfs/procfs.c:134: error: 'reiserfs_proc_info_data_t' has no member named 'max_hash_collisions' fs/reiserfs/procfs.c:134: error: 'reiserfs_proc_info_data_t' has no member named 'breads' fs/reiserfs/procfs.c:135: error: 'reiserfs_proc_info_data_t' has no member named 'bread_miss' fs/reiserfs/procfs.c:135: error: 'reiserfs_proc_info_data_t' has no member named 'search_by_key' fs/reiserfs/procfs.c:136: error: 'reiserfs_proc_info_data_t' has no member named 'search_by_key_fs_changed' fs/reiserfs/procfs.c:136: error: 'reiserfs_proc_info_data_t' has no member named 'search_by_key_restarted' fs/reiserfs/procfs.c:137: error: 'reiserfs_proc_info_data_t' has no member named 'insert_item_restarted' fs/reiserfs/procfs.c:137: error: 'reiserfs_proc_info_data_t' has no member named 'paste_into_item_restarted' fs/reiserfs/procfs.c:138: error: 'reiserfs_proc_info_data_t' has no member named 'cut_from_item_restarted' fs/reiserfs/procfs.c:139: error: 'reiserfs_proc_info_data_t' has no member named 'delete_solid_item_restarted' fs/reiserfs/procfs.c:139: error: 'reiserfs_proc_info_data_t' has no member named 'delete_item_restarted' fs/reiserfs/procfs.c:140: error: 'reiserfs_proc_info_data_t' has no member named 'leaked_oid' fs/reiserfs/procfs.c:140: error: 'reiserfs_proc_info_data_t' has no member named 'leaves_removable' fs/reiserfs/procfs.c: In function 'show_per_level': fs/reiserfs/procfs.c:184: error: 'reiserfs_proc_info_data_t' has no member named 'balance_at' fs/reiserfs/procfs.c:185: error: 'reiserfs_proc_info_data_t' has no member named 'sbk_read_at' fs/reiserfs/procfs.c:186: error: 'reiserfs_proc_info_data_t' has no member named 'sbk_fs_changed' fs/reiserfs/procfs.c:187: error: 'reiserfs_proc_info_data_t' has no member named 'sbk_restarted' fs/reiserfs/procfs.c:188: error: 'reiserfs_proc_info_data_t' has no member named 'free_at' fs/reiserfs/procfs.c:189: error: 'reiserfs_proc_info_data_t' has no member named 'items_at' fs/reiserfs/procfs.c:190: error: 'reiserfs_proc_info_data_t' has no member named 'can_node_be_removed' fs/reiserfs/procfs.c:191: error: 'reiserfs_proc_info_data_t' has no member named 'lnum' fs/reiserfs/procfs.c:192: error: 'reiserfs_proc_info_data_t' has no member named 'rnum' fs/reiserfs/procfs.c:193: error: 'reiserfs_proc_info_data_t' has no member named 'lbytes' fs/reiserfs/procfs.c:194: error: 'reiserfs_proc_info_data_t' has no member named 'rbytes' fs/reiserfs/procfs.c:195: error: 'reiserfs_proc_info_data_t' has no member named 'get_neighbors' fs/reiserfs/procfs.c:196: error: 'reiserfs_proc_info_data_t' has no member named 'get_neighbors_restart' fs/reiserfs/procfs.c:197: error: 'reiserfs_proc_info_data_t' has no member named 'need_l_neighbor' fs/reiserfs/procfs.c:197: error: 'reiserfs_proc_info_data_t' has no member named 'need_r_neighbor' fs/reiserfs/procfs.c: In function 'show_bitmap': fs/reiserfs/procfs.c:224: error: 'reiserfs_proc_info_data_t' has no member named 'free_block' fs/reiserfs/procfs.c:225: error: 'reiserfs_proc_info_data_t' has no member named 'scan_bitmap' fs/reiserfs/procfs.c:226: error: 'reiserfs_proc_info_data_t' has no member named 'scan_bitmap' fs/reiserfs/procfs.c:227: error: 'reiserfs_proc_info_data_t' has no member named 'scan_bitmap' fs/reiserfs/procfs.c:228: error: 'reiserfs_proc_info_data_t' has no member named 'scan_bitmap' fs/reiserfs/procfs.c:229: error: 'reiserfs_proc_info_data_t' has no member named 'scan_bitmap' fs/reiserfs/procfs.c:230: error: 'reiserfs_proc_info_data_t' has no member named 'scan_bitmap' fs/reiserfs/procfs.c:230: error: 'reiserfs_proc_info_data_t' has no member named 'scan_bitmap' fs/reiserfs/procfs.c: In function 'show_journal': fs/reiserfs/procfs.c:384: error: 'reiserfs_proc_info_data_t' has no member named 'journal' fs/reiserfs/procfs.c:385: error: 'reiserfs_proc_info_data_t' has no member named 'journal' fs/reiserfs/procfs.c:386: error: 'reiserfs_proc_info_data_t' has no member named 'journal' fs/reiserfs/procfs.c:387: error: 'reiserfs_proc_info_data_t' has no member named 'journal' fs/reiserfs/procfs.c:388: error: 'reiserfs_proc_info_data_t' has no member named 'journal' fs/reiserfs/procfs.c:389: error: 'reiserfs_proc_info_data_t' has no member named 'journal' fs/reiserfs/procfs.c:390: error: 'reiserfs_proc_info_data_t' has no member named 'journal' fs/reiserfs/procfs.c:391: error: 'reiserfs_proc_info_data_t' has no member named 'journal' fs/reiserfs/procfs.c:392: error: 'reiserfs_proc_info_data_t' has no member named 'journal' fs/reiserfs/procfs.c:393: error: 'reiserfs_proc_info_data_t' has no member named 'journal' fs/reiserfs/procfs.c:394: error: 'reiserfs_proc_info_data_t' has no member named 'journal' fs/reiserfs/procfs.c:395: error: 'reiserfs_proc_info_data_t' has no member named 'journal' fs/reiserfs/procfs.c:395: error: 'reiserfs_proc_info_data_t' has no member named 'journal' fs/reiserfs/procfs.c:395: error: 'reiserfs_proc_info_data_t' has no member named 'journal' fs/reiserfs/procfs.c: In function 'reiserfs_proc_info_init': fs/reiserfs/procfs.c:504: warning: implicit declaration of function '__PINFO' fs/reiserfs/procfs.c:504: error: request for member 'lock' in something not a structure or union fs/reiserfs/procfs.c: In function 'reiserfs_proc_info_done': fs/reiserfs/procfs.c:544: error: request for member 'lock' in something not a structure or union fs/reiserfs/procfs.c:545: error: request for member 'exiting' in something not a structure or union fs/reiserfs/procfs.c:546: error: request for member 'lock' in something not a structure or union Signed-off-by:
-
Eric W. Biederman authored
While researching the tty layer pid leaks I found a weird case in selinux when we drop a controlling tty because of inadequate permissions we don't do the normal hangup processing. Which is a problem if it happens the session leader has exec'd something that can no longer access the tty. We already have code in the kernel to handle this case in the form of the TIOCNOTTY ioctl. So this patch factors out a helper function that is the essence of that ioctl and calls it from the selinux code. This removes the inconsistency in handling dropping of a controlling tty and who knows it might even make some part of user space happy because it received a SIGHUP it was expecting. In addition since this removes the last user of proc_set_tty outside of tty_io.c proc_set_tty is made static and removed from tty.h Signed-off-by:
Eric W. Biederman <ebiederm@xmission.com> Acked-by:
Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: James Morris <jmorris@namei.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by:
-
Eric W. Biederman authored
This patch should contain no functional changes. At some point I got confused and thought put_pid could not be called while a spin lock was held. While it may be nice to avoid that to reduce lock hold times put_pid can be safely called while we hold a spin lock. This patch removes all of the complications from the code introduced by my misunderstanding, making the code a little more readable. Signed-off-by:
-
Eric W. Biederman authored
All of the users of proc_clear_tty are compiled into the kernel so exporting this symbol appears gratuitous. Signed-off-by:
-
Gerd Hoffmann authored
The console subsystem already has an idea of a boot console, using the CON_BOOT flag. The implementation has some flaws though. The major problem is that presence of a boot console makes register_console() ignore any other console devices (unless explicitly specified on the kernel command line). This patch fixes the console selection code to *not* consider a boot console a full-featured one, so the first non-boot console registering will become the default console instead. This way the unregister call for the boot console in the register_console() function actually triggers and the handover from the boot console to the real console device works smoothly. Added a printk for the handover, so you know which console device the output goes to when the boot console stops printing messages. The disable_early_printk() call is obsolete with that patch, explicitly disabling the early console isn't needed any more as it works automagically with that patch. I've walked through the tree, dropped all disable_early_printk() instances found below arch/ and tagged the consoles with CON_BOOT if needed. The code is tested on x86, sh (thanks to Paul) and mips (thanks to Ralf). Changes to last version: Rediffed against -rc3, adapted to mips cleanups by Ralf, fixed "udbg-immortal" cmd line arg on powerpc. Signed-off-by:
Gerd Hoffmann <kraxel@exsuse.de> Acked-by:
Paul Mundt <lethal@linux-sh.org> Acked-by:
-
Andrew Morton authored
console.name[] is eight chars, but so is "earlyvga". So when we try to print console->name when using earlyvga it runs off the end of the string. Make it bigger. Diagnosed-by:
Gerd Hoffmann <kraxel@redhat.com> Signed-off-by:
-
Alexey Dobriyan authored
Eternal quest to make while true; do cat /proc/fs/xfs/stat >/dev/null 2>/dev/null; done while true; do find /proc -type f 2>/dev/null | xargs cat >/dev/null 2>/dev/null; done while true; do modprobe xfs; rmmod xfs; done work reliably continues and now kernel oopses in the following way: BUG: unable to handle ... at virtual address 6b6b6b6b EIP is at badness process: cat proc_oom_score proc_info_read sys_fstat64 vfs_read proc_info_read sys_read Failing code is prefetch hidden in list_for_each_entry() in badness(). badness() is reachable from two points. One is proc_oom_score, another is out_of_memory() => select_bad_process() => badness(). Second path grabs tasklist_lock, while first doesn't. Signed-off-by:
-
Nick Piggin authored
LTP test sigaction_16_24 fails, because it expects sem_wait to be restarted if SA_RESTART is set. sem_wait is implemented with futex_wait, that currently doesn't support being restarted. Ulrich confirms that the call should be restartable. Implement a restart_block method to handle the relative timeout, and allow restarts. Signed-off-by:
Nick Piggin <npiggin@suse.de> Cc: Ulrich Drepper <drepper@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Acked-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Rusty Russell authored
lguest uses the convenient futex infrastructure for inter-domain I/O, so expose get_futex_key, get_key_refs (renamed get_futex_key_refs) and drop_key_refs (renamed drop_futex_key_refs). Also means we need to expose the union that these use. No code changes. Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Cc: Andi Kleen <ak@suse.de> Signed-off-by:
-
Dale Farnsworth authored
Signed-off-by:
Dale Farnsworth.org <dale@farnsworth.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Nobuhiro Iwamatsu authored
Add an RTC driver for Ricoh RS5C313 RTC chip. [akpm@linux-foundation.org: Zillions of coding-style fixes] [akpm@linux-foundation.org: build fixes] Signed-off-by:
Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
