- 07 Feb, 2007 23 commits
-
-
Geoff Levand authored
Add a new routine ps3_get_firmware_version() and use it to output the firmware version to dmesg. Signed-off-by:
Geoff Levand <geoffrey.levand@am.sony.com> Acked-by:
Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by:
Paul Mackerras <paulus@samba.org>
-
Geoff Levand authored
Remove the unneded routine ps3_show_cpuinfo(). The common platform code now prints the same information. Signed-off-by:
-
Geoff Levand authored
Add a comment and a preprocessor macro to help clearify the alignment needs of the PS3 interrupt bitmap. Signed-off-by:
-
Geert Uytterhoeven authored
PS3 interrupt core update: - Add ps3_alloc_irq() and ps3_free_irq(), to allocate a virtual interrupt number for an interrupt outlet, which is needed by the PS3 GPU frame buffer device and audio drivers Signed-off-by:Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by:
-
Geoff Levand authored
Change the PS3 irq allocation routines to take an argument indicating which cpu (processor thread) the interrupt should be serviced on. The current system configuration favors device interrupts that are serviced on cpu0, so that is used as the default. Signed-off-by:
-
Benjamin Herrenschmidt authored
Change the PS3 interrupt bitmask routines to be lockless. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Geoff Levand authored
PS3 fixups for interrups on SMP. Fixes the alignment of the interrupt status bitmap, changes the hypervisor interrupt calls to the '_ext' versions that take an explicit processor thread ID. Signed-off-by:
-
Geoff Levand authored
Rename some PS3 interrupt symbols to avoid name clashes and aid debugging. No change to code. Signed-off-by:
-
Geoff Levand authored
Remove incorrect alignment attributes in PS3 platform code for struct spe_shadow, struct os_area_header, and struct os_area_params. Signed-off-by:
-
Benjamin Herrenschmidt authored
Fix two minor bugs in the PS3 system bus mmio region code. First, on error or when freeing a region, retain the bus_addr and len fields to allow subsequent calls to create the region. Second, correct the region address argument to the lv1_unmap_device_mmio_region() call. Fixes modprobe/rmmod of some drivers. Signed-off-by:
-
Geert Uytterhoeven authored
Handle storage-related repository data: - Add missing implementations of ps3_repository_read_stor_*() repository accessors. - Dump storage properties in debug mode - Add PS3_DEV_TYPE_STOR_{DISK,ROM,FLASH} device types (which are identical to the corresponding SCSI device types) to enum ps3_dev_type Signed-off-by: -
Geoff Levand authored
Various fixes for the PS3 repository code: - Sync signatures of function prototypes and implementations (enum vs. unsigned int) - Correct references to `regions' as `registers': o Correct enum ps3_region_type as enum ps3_reg_type, o Correct PS3_REGION_TYPE_* as PS3_REG_TYPE_*, o Correct ps3_repository_find_region() as ps3_repository_find_reg(). - Correct function name in pr_debug() call - Minor error condition improvements. Signed-off-by: -
Linas Vepstas authored
It appears that EEH is improperly enabled for some Power4 systems. On these systems, the ibm,set-eeh-option returns a value of success even when EEH is not supported on the given node. Thus, an explicit check for support is required. During boot, on power4, without this patch, one sees messages similar to: EEH: event on unsupported device, rc=0 dn=/pci@400000000110/IBM,sp@1 EEH: event on unsupported device, rc=0 dn=/pci@400000000110/pci@2 EEH: event on unsupported device, rc=0 dn=/pci@400000000110/pci@2,2 etc. The patch makes these go away. Without this patch, EEH recovery does seem to work correctly for at least some devices (I tested ethernet e1000), but fails to recover others (the Emulex LightPulse LPFC, most notably). Off the top of my head, I don't remember why some devices are affected, but not others. The PAPR indicates that the correct way to test for EEH is as done in this patch; its not clear to me if this was in the PAPR all along, or recently added; if it was there all along, its not clear to me why this hadn't been fixed long ago. I suspect only certain firmware levels are affected. Signed-off-by:
Linas Vepstas <linas@austin.ibm.com> Signed-off-by:
-
Robert P. J. Day authored
Replace an apparent typo of CONFIG_SERIAL_CPM_SMC with CONFIG_SERIAL_CPM_SMC2. Signed-off-by:
Robert P. J. Day <rpjday@mindspring.com> Acked-by:
Kumar Gala <galak@kernel.crashing.org> Signed-off-by:
-
Nathan Lynch authored
This workaround was copy-pasted from the powermac code. It's not necessary for maple. Signed-off-by:
Nathan Lynch <ntl@pobox.com> Signed-off-by:
-
Vitaly Bordug authored
This add support of the Freescale mpc86xads reference board to arch/powerpc. Supported SMC1 and SMC2 (UART and serial console), FEC 100Mbps Ethernet, SCC1 Ethernet (10Mbps hdx) Signed-off-by:
Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by:
-
Vitaly Bordug authored
This adds the core 8xx stuff and specifically mpc885ads board-specific bits to arch/powerpc. Respective Kconfig has been cleaned up from the stuff not yet ported over to avoid confusion. Updated and cleaned version. Signed-off-by:
-
Vitaly Bordug authored
This covers common CPM access functions, CPM interrupt controller code, micropatch and a few compatibility things to kee the same driver base working with arch/ppc. This version is refined with all the comments (mostly PIC-related) addressed. Signed-off-by:
-
Vitaly Bordug authored
Added 8xx SoC peripherials: fec for Ethernet and smc for UARTs. Ordinary routines to extract values from the device tree and insert respective platform devices Signed-off-by:
-
Vitaly Bordug authored
Including support for non-coherent cache, some mm-related things + relevant field in Kconfig and Makefiles. Also included rheap.o compilation if 8xx is defined. Non-coherent mapping were refined and renamed according to Cristoph Hellwig. Orphaned functions were cleaned up. [Also removed arch/ppc/kernel/dma-mapping.c, because otherwise compiling with ARCH=ppc for a non DMA-cache-coherent platform ends up with two copies of __dma_alloc_coherent etc. -- paulus.] Signed-off-by:
-
Vitaly Bordug authored
This is just a straight port of the same done in arch/ppc by Marcelo Tosatti. One used to be [PATCH] ppc32 8xx: update_mmu_cache() needs unconditional tlbie, commit eb07d964 In a nutshell, the board is nearly stuck without this, yet without any visible failure - being just very slow. Signed-off-by:
-
Vitaly Bordug authored
This makes cpm uart able to work using OF-passed parameters in case of CPM stuff (found on most mpc8xx reference and custom boards). The idea is to keep ppc stuff working yet making it able to be used for powerpc. Signed-off-by:
-
Michael Neuling authored
CPU_FTRS_POWER6X is unused, hence remove it. Signed-off-by Michael Neuling <mikey@neuling.org> Signed-off-by:
-
- 30 Jan, 2007 5 commits
-
-
Kim Phillips authored
Add the mpc8323emds device tree source (dts) Signed-off-by:
Scott Wood <scottwood@freescale.com> Signed-off-by:
Kim Phillips <kim.phillips@freescale.com> Signed-off-by:
-
Kim Phillips authored
The defconfig for the 8323EMDS is identical to the 8360E MDS defconfig, except CONFIG_MATH_EMULATION is set, since the 8323 doesn't have a FPU. Signed-off-by:
-
Kumar Gala authored
Enable stack overflow checking (DEBUG_STACKOVERFLOW) and stack usage (DEBUG_STACK_USAGE) on ppc32. Signed-off-by: -
Kumar Gala authored
-
Li Yang authored
Some prototypes are separated from of_device.h into of_platform.h. Add the new include to fix warning. Signed-off-by:
Li Yang <leoli@freescale.com> Signed-off-by:
-
- 26 Jan, 2007 5 commits
-
-
Kumar Gala authored
fastcall is an x86 specific function attribute and has no business in ppc code Signed-off-by: -
Kumar Gala authored
It's useful to have access to struct ipic handle that just got created in ipic_init(). For example, if we want to setup an external IRQ with out a device node we need access ipic->irqhost to create the virtual to HW IRQ mapping and to set the IRQ sense. With this we can mimic the old sense array concept that existed in arch/ppc. Signed-off-by: -
Kumar Gala authored
Make the various 83xx *_init_IRQ() functions static Signed-off-by: -
Kumar Gala authored
It's possibly that we get an reset requestion when interrupts are disabled. (For example an oops in an interrupt handler). Therefor, we can't call ioremap in the reset function. Moving the ioremap of the registers we need access to an arch_initcall helps the problem. However we still have a window between boot and the arch_initcall in which the register pointer will not be setup and thus we spin if the reset function is called. If one needs to ensure even this case is covered, look at use of the watchdog provided on 83xx to reset the processor. Signed-off-by: -
Kumar Gala authored
Updated MATH_EMULATION depends to be on PPC_MPC832x instead of PPC_83xx. Only the the MPC832x has no floating point unit in the core. Updated the other 83xx defconfigs that got math emulation turned on incorrectly. Signed-off-by:
-
- 24 Jan, 2007 7 commits
-
-
Ishizaki Kou authored
This patch setup serial interfaces in SCC to work with serial_txx9 driver. Signed-off-by:
Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Acked-by:
-
Ishizaki Kou authored
This patch includes support for pci buses, base of Celleb specific devices, and etc. It works on of_platform bus. Signed-off-by:
-
Ishizaki Kou authored
Adds Cell SCC(Super Companion Chip) definitions. Signed-off-by:
-
Ishizaki Kou authored
This patch creates Celleb platform dependent file to define Beat hypervisor call numbers. Signed-off-by:
-
Ishizaki Kou authored
This patch adds irq remapping hook. On interrupt mechanism on Beat, when an irq outlet which has an id which is formerly used is created, remapping the irq is required. Signed-off-by:
-
Ishizaki Kou authored
Struct pci_controller doesn't prepare for the dependent data of each specific bus. This patch adds private member to struct pci_controller. Signed-off-by:
-
Ishizaki Kou authored
Op_model_cell supports native Cell. By returning -EINVAL, oprofile uses timer interrupt on Cell LPAR. Signed-off-by:
-
