- 07 Feb, 2019 8 commits
-
-
Tonghao Zhang authored
When we offload tc filters to hardware, hardware flows can be updated when mac of encap destination ip is changed. But we ignore one case, that the mac of local encap ip can be changed too, so we should also update them. To fix it, add route_dev in mlx5e_encap_entry struct to save the local encap netdevice, and when mac changed, kernel will flush all the neighbour on the netdevice and send NETEVENT_NEIGH_UPDATE event. The mlx5 driver will delete the flows and add them when neighbour available again. Fixes: 232c0013 ("net/mlx5e: Add support to neighbour update flow") Cc: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Manish Chopra says: ==================== qed*: Bug fixes. This series contains general qed/qede fixes. Please consider applying this to "net" ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Manish Chopra authored
Version update for qed/qede modules. Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rahul Verma authored
Fix unnecessary logging of message in an expected default case where coalescing value read (via ethtool -c) migh not be valid unless they are configured explicitly in the hardware using ethtool -C. Signed-off-by: Rahul Verma <rverma@marvell.com> Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sudarsana Reddy Kalluru authored
Under heavy traffic load, when changing number of channels via ethtool (ethtool -L) which will cause interface to be reloaded, it was observed that some packets gets transmitted on old TX channel/queue id which doesn't really exist after the channel configuration leads to system crash. Add a safeguard in the driver by validating queue id through ndo_select_queue() which is called before the ndo_start_xmit(). Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sudarsana Reddy Kalluru authored
Max supported queues is derived incorrectly in the case of multi-CoS. Need to consider TCs while calculating num_queues for PF. Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sudarsana Reddy Kalluru authored
In the case of Unified Fabric Port (UFP) mode, switch provides the traffic class (TC) value to be used for the traffic. Configure hardware to use this TC value for vlan priority. Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Manish Chopra authored
When slowpath messages are sent with high rate, the resulting events can lead to a FW assert in case they are not handled fast enough (Event Queue Full assert). Attempt to send queued slowpath messages only after the newly evacuated entries in the EQ ring are indicated to FW. Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 06 Feb, 2019 5 commits
-
-
Dan Carpenter authored
This function can't succeed if dp->pl is NULL. It will Oops inside the call to return phylink_ethtool_get_eee(dp->pl, e); Fixes: 1be52e97 ("dsa: slave: eee: Allow ports to use phylink") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Russell King authored
Add maintainer entry for SFF/SFP/SFP+ support. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
When either "goto wait_interrupted;" or "goto wait_error;" paths are taken, socket lock has already been released. This patch fixes following syzbot splat : WARNING: bad unlock balance detected! 5.0.0-rc4+ #59 Not tainted ------------------------------------- syz-executor223/8256 is trying to release lock (sk_lock-AF_RXRPC) at: [<ffffffff86651353>] rxrpc_recvmsg+0x6d3/0x3099 net/rxrpc/recvmsg.c:598 but there are no more locks to release! other info that might help us debug this: 1 lock held by syz-executor223/8256: #0: 00000000fa9ed0f4 (slock-AF_RXRPC){+...}, at: spin_lock_bh include/linux/spinlock.h:334 [inline] #0: 00000000fa9ed0f4 (slock-AF_RXRPC){+...}, at: release_sock+0x20/0x1c0 net/core/sock.c:2798 stack backtrace: CPU: 1 PID: 8256 Comm: syz-executor223 Not tainted 5.0.0-rc4+ #59 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_unlock_imbalance_bug kernel/locking/lockdep.c:3391 [inline] print_unlock_imbalance_bug.cold+0x114/0x123 kernel/locking/lockdep.c:3368 __lock_release kernel/locking/lockdep.c:3601 [inline] lock_release+0x67e/0xa00 kernel/locking/lockdep.c:3860 sock_release_ownership include/net/sock.h:1471 [inline] release_sock+0x183/0x1c0 net/core/sock.c:2808 rxrpc_recvmsg+0x6d3/0x3099 net/rxrpc/recvmsg.c:598 sock_recvmsg_nosec net/socket.c:794 [inline] sock_recvmsg net/socket.c:801 [inline] sock_recvmsg+0xd0/0x110 net/socket.c:797 __sys_recvfrom+0x1ff/0x350 net/socket.c:1845 __do_sys_recvfrom net/socket.c:1863 [inline] __se_sys_recvfrom net/socket.c:1859 [inline] __x64_sys_recvfrom+0xe1/0x1a0 net/socket.c:1859 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x446379 Code: e8 2c b3 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 2b 09 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fe5da89fd98 EFLAGS: 00000246 ORIG_RAX: 000000000000002d RAX: ffffffffffffffda RBX: 00000000006dbc28 RCX: 0000000000446379 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003 RBP: 00000000006dbc20 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000006dbc2c R13: 0000000000000000 R14: 0000000000000000 R15: 20c49ba5e353f7cf Fixes: 248f219c ("rxrpc: Rewrite the data and ack handling code") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: David Howells <dhowells@redhat.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Since mISDN_close() uses dev->pending to iterate over active timers, there is a chance that one timer got removed from the ->pending list in dev_expire_timer() but that the thread has not called yet wake_up_interruptible() So mISDN_close() could miss this and free dev before completion of at least one dev_expire_timer() syzbot was able to catch this race : BUG: KASAN: use-after-free in register_lock_class+0x140c/0x1bf0 kernel/locking/lockdep.c:827 Write of size 8 at addr ffff88809fc18948 by task syz-executor1/24769 CPU: 1 PID: 24769 Comm: syz-executor1 Not tainted 5.0.0-rc5 #60 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 __asan_report_store8_noabort+0x17/0x20 mm/kasan/generic_report.c:140 register_lock_class+0x140c/0x1bf0 kernel/locking/lockdep.c:827 __lock_acquire+0x11f/0x4700 kernel/locking/lockdep.c:3224 lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:3841 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x95/0xcd kernel/locking/spinlock.c:152 __wake_up_common_lock+0xc7/0x190 kernel/sched/wait.c:120 __wake_up+0xe/0x10 kernel/sched/wait.c:145 dev_expire_timer+0xe4/0x3b0 drivers/isdn/mISDN/timerdev.c:174 call_timer_fn+0x190/0x720 kernel/time/timer.c:1325 protocol 88fb is buggy, dev hsr_slave_0 protocol 88fb is buggy, dev hsr_slave_1 expire_timers kernel/time/timer.c:1362 [inline] __run_timers kernel/time/timer.c:1681 [inline] __run_timers kernel/time/timer.c:1649 [inline] run_timer_softirq+0x652/0x1700 kernel/time/timer.c:1694 __do_softirq+0x266/0x95a kernel/softirq.c:292 invoke_softirq kernel/softirq.c:373 [inline] irq_exit+0x180/0x1d0 kernel/softirq.c:413 exiting_irq arch/x86/include/asm/apic.h:536 [inline] smp_apic_timer_interrupt+0x14a/0x570 arch/x86/kernel/apic/apic.c:1062 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:807 </IRQ> RIP: 0010:__sanitizer_cov_trace_pc+0x26/0x50 kernel/kcov.c:101 Code: 90 90 90 90 55 48 89 e5 48 8b 75 08 65 48 8b 04 25 40 ee 01 00 65 8b 15 98 12 92 7e 81 e2 00 01 1f 00 75 2b 8b 90 d8 12 00 00 <83> fa 02 75 20 48 8b 88 e0 12 00 00 8b 80 dc 12 00 00 48 8b 11 48 RSP: 0018:ffff8880589b7a60 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13 RAX: ffff888087ce25c0 RBX: 0000000000000001 RCX: ffffffff818f8ca3 RDX: 0000000000000000 RSI: ffffffff818f8b48 RDI: 0000000000000001 RBP: ffff8880589b7a60 R08: ffff888087ce25c0 R09: ffffed1015d25bd0 R10: ffffed1015d25bcf R11: ffff8880ae92de7b R12: ffffea0001ae4680 R13: ffffea0001ae4688 R14: 0000000000000000 R15: ffffea0001b41648 PageIdle include/linux/page-flags.h:398 [inline] page_is_idle include/linux/page_idle.h:29 [inline] mark_page_accessed+0x618/0x1140 mm/swap.c:398 touch_buffer fs/buffer.c:59 [inline] __find_get_block+0x312/0xcc0 fs/buffer.c:1298 sb_find_get_block include/linux/buffer_head.h:338 [inline] recently_deleted fs/ext4/ialloc.c:682 [inline] find_inode_bit.isra.0+0x202/0x510 fs/ext4/ialloc.c:722 __ext4_new_inode+0x14ad/0x52c0 fs/ext4/ialloc.c:914 ext4_symlink+0x3f8/0xbe0 fs/ext4/namei.c:3096 vfs_symlink fs/namei.c:4126 [inline] vfs_symlink+0x378/0x5d0 fs/namei.c:4112 do_symlinkat+0x22b/0x290 fs/namei.c:4153 __do_sys_symlink fs/namei.c:4172 [inline] __se_sys_symlink fs/namei.c:4170 [inline] __x64_sys_symlink+0x59/0x80 fs/namei.c:4170 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457b67 Code: 0f 1f 00 b8 5c 00 00 00 0f 05 48 3d 01 f0 ff ff 0f 83 6d bb fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 b8 58 00 00 00 0f 05 <48> 3d 01 f0 ff ff 0f 83 4d bb fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fff045ce0f8 EFLAGS: 00000202 ORIG_RAX: 0000000000000058 RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 0000000000457b67 RDX: 00007fff045ce173 RSI: 00000000004bd63f RDI: 00007fff045ce160 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013 R10: 0000000000000075 R11: 0000000000000202 R12: 0000000000000000 R13: 0000000000000001 R14: 000000000000029b R15: 0000000000000001 Allocated by task 24763: save_stack+0x45/0xd0 mm/kasan/common.c:73 set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc mm/kasan/common.c:496 [inline] __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:469 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:504 kmem_cache_alloc_trace+0x151/0x760 mm/slab.c:3609 kmalloc include/linux/slab.h:545 [inline] mISDN_open+0x9a/0x270 drivers/isdn/mISDN/timerdev.c:59 misc_open+0x398/0x4c0 drivers/char/misc.c:141 chrdev_open+0x247/0x6b0 fs/char_dev.c:417 do_dentry_open+0x47d/0x1130 fs/open.c:771 vfs_open+0xa0/0xd0 fs/open.c:880 do_last fs/namei.c:3418 [inline] path_openat+0x10d7/0x4690 fs/namei.c:3534 do_filp_open+0x1a1/0x280 fs/namei.c:3564 do_sys_open+0x3fe/0x5d0 fs/open.c:1063 __do_sys_openat fs/open.c:1090 [inline] __se_sys_openat fs/open.c:1084 [inline] __x64_sys_openat+0x9d/0x100 fs/open.c:1084 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 24762: save_stack+0x45/0xd0 mm/kasan/common.c:73 set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/common.c:458 kasan_slab_free+0xe/0x10 mm/kasan/common.c:466 __cache_free mm/slab.c:3487 [inline] kfree+0xcf/0x230 mm/slab.c:3806 mISDN_close+0x2a1/0x390 drivers/isdn/mISDN/timerdev.c:97 __fput+0x2df/0x8d0 fs/file_table.c:278 ____fput+0x16/0x20 fs/file_table.c:309 task_work_run+0x14a/0x1c0 kernel/task_work.c:113 tracehook_notify_resume include/linux/tracehook.h:188 [inline] exit_to_usermode_loop+0x273/0x2c0 arch/x86/entry/common.c:166 prepare_exit_to_usermode arch/x86/entry/common.c:197 [inline] syscall_return_slowpath arch/x86/entry/common.c:268 [inline] do_syscall_64+0x52d/0x610 arch/x86/entry/common.c:293 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff88809fc18900 which belongs to the cache kmalloc-192 of size 192 The buggy address is located 72 bytes inside of 192-byte region [ffff88809fc18900, ffff88809fc189c0) The buggy address belongs to the page: page:ffffea00027f0600 count:1 mapcount:0 mapping:ffff88812c3f0040 index:0xffff88809fc18000 flags: 0x1fffc0000000200(slab) raw: 01fffc0000000200 ffffea000269f648 ffffea00029f7408 ffff88812c3f0040 raw: ffff88809fc18000 ffff88809fc18000 000000010000000b 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88809fc18800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff88809fc18880: 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff88809fc18900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88809fc18980: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff88809fc18a00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Karsten Keil <isdn@linux-pingi.de> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andrew Lunn authored
The ATU port vector contains a bit per port of the switch. The code wrongly used it as a port number, and incremented a port counter. This resulted in the wrong interfaces counter being incremented, and potentially going off the end of the array of ports. Fix this by using the source port ID for the violation, which really is a port number. Reported-by: Chris Healy <Chris.Healy@zii.aero> Tested-by: Chris Healy <Chris.Healy@zii.aero> Fixes: 65f60e45 ("net: dsa: mv88e6xxx: Keep ATU/VTU violation statistics") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 05 Feb, 2019 9 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
mlx5-fixes-2019-02-05
-
Guy Shattah authored
In packets that need to be decaped the internal headers have to be checked, not the external ones. Fixes: bdd66ac0 ("net/mlx5e: Disallow TC offloading of unsupported match/action combinations") Signed-off-by: Guy Shattah <sguy@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Or Gerlitz authored
The match level computed by the driver gets to be wrong for decap rules with wildcarded inner packet match such as: tc filter add dev vxlan_sys_4789 protocol all parent ffff: prio 2 flower enc_dst_ip 192.168.0.9 enc_key_id 100 enc_dst_port 4789 action tunnel_key unset action mirred egress redirect dev eth1 The FW errs for a missing matching meta-data indicator for the outer headers (where we do have a match), and a wrong matching meta-data indicator for the inner headers (where we don't have a match). Fix that by taking into account the matching on the tunnel info and relating the match level of the encapsulated packet to the firmware inner headers indicator in case of decap. As for vxlan we mandate a match on the tunnel udp dst port, and in general we practically madndate a match on the source or dest ip for any IP tunnel, the fix was done in a minimal manner around the tunnel match parsing code. Fixes: d708f902 ('net/mlx5e: Get the required HW match level while parsing TC flow matches') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reported-by: Slava Ovsiienko <viacheslavo@mellanox.com> Reviewed-by: Jianbo Liu <jianbol@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Raed Salem authored
At Innova IPsec TX offload data path a special software parser metadata is used to pass some packet attributes to the hardware, this metadata is passed using the Ethernet control segment of a WQE (a HW descriptor) header. The cited commit might nullify this header, hence the metadata is lost, this caused a significant performance drop during hw offloading operation. Fix by restoring the metadata at the Ethernet control segment in case it was nullified. Fixes: 37fdffb2 ("net/mlx5: WQ, fixes for fragmented WQ buffers API") Signed-off-by: Raed Salem <raeds@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Use CONFIG_NF_TABLES_INET from seltests, not NF_TABLES_INET. From Naresh Kamboju. 2) Add a test to cover masquerading and redirect case, from Florian Westphal. 3) Two packets coming from the same socket may race to set up NAT, ending up with different tuples and the packet losing race being dropped. Update nf_conntrack_tuple_taken() to exercise clash resolution for this case. From Martynas Pumputis and Florian Westphal. 4) Unbind anonymous sets from the commit and abort path, this fixes a splat due to double set list removal/release in case that the transaction needs to be aborted. 5) Do not preserve original output interface for packets that are redirected in the output chain when ip6_route_me_harder() is called. Otherwise packets end up going not going to the loopback device. From Eli Cooper. 6) Fix bogus splat in nft_compat with CONFIG_REFCOUNT_FULL=y, this also simplifies the existing logic to deal with the list insertions of the xtables extensions. From Florian Westphal. Diffstat look rather larger than usual because of the new selftest, but Florian and I consider that having tests soon into the tree is good to improve coverage. If there's a different policy in this regard, please, let me know. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Florian Westphal authored
When I moved the refcount to refcount_t type I missed the fact that refcount_inc() will result in use-after-free warning with CONFIG_REFCOUNT_FULL=y builds. The correct fix would be to init the reference count to 1 at allocation time, but, unfortunately we cannot do this, as we can't undo that in case something else fails later in the batch. So only solution I see is to special-case the 'new entry' condition and replace refcount_inc() with a "delayed" refcount_set(1) in this case, as done here. The .activate callback can be removed to simplify things, we only need to make sure that deactivate() decrements/unlinks the entry from the list at end of transaction phase (commit or abort). Fixes: 12c44aba ("netfilter: nft_compat: use refcnt_t type for nft_xt reference count") Reported-by: Jordan Glover <Golden_Miller83@protonmail.ch> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Eli Cooper authored
Commit 508b0904 ("netfilter: ipv6: Preserve link scope traffic original oif") made ip6_route_me_harder() keep the original oif for link-local and multicast packets. However, it also affected packets for the loopback address because it used rt6_need_strict(). REDIRECT rules in the OUTPUT chain rewrite the destination to loopback address; thus its oif should not be preserved. This commit fixes the bug that redirected local packets are being dropped. Actually the packet was not exactly dropped; Instead it was sent out to the original oif rather than lo. When a packet with daddr ::1 is sent to the router, it is effectively dropped. Fixes: 508b0904 ("netfilter: ipv6: Preserve link scope traffic original oif") Signed-off-by: Eli Cooper <elicooper@gmx.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Marc Zyngier authored
Creating a macvtap on a DSA-backed interface results in the following splat when lockdep is enabled: [ 19.638080] IPv6: ADDRCONF(NETDEV_CHANGE): lan0: link becomes ready [ 23.041198] device lan0 entered promiscuous mode [ 23.043445] device eth0 entered promiscuous mode [ 23.049255] [ 23.049557] ============================================ [ 23.055021] WARNING: possible recursive locking detected [ 23.060490] 5.0.0-rc3-00013-g56c857a1b8d3 #118 Not tainted [ 23.066132] -------------------------------------------- [ 23.071598] ip/2861 is trying to acquire lock: [ 23.076171] 00000000f61990cb (_xmit_ETHER){+...}, at: dev_set_rx_mode+0x1c/0x38 [ 23.083693] [ 23.083693] but task is already holding lock: [ 23.089696] 00000000ecf0c3b4 (_xmit_ETHER){+...}, at: dev_uc_add+0x24/0x70 [ 23.096774] [ 23.096774] other info that might help us debug this: [ 23.103494] Possible unsafe locking scenario: [ 23.103494] [ 23.109584] CPU0 [ 23.112093] ---- [ 23.114601] lock(_xmit_ETHER); [ 23.117917] lock(_xmit_ETHER); [ 23.121233] [ 23.121233] *** DEADLOCK *** [ 23.121233] [ 23.127325] May be due to missing lock nesting notation [ 23.127325] [ 23.134315] 2 locks held by ip/2861: [ 23.137987] #0: 000000003b766c72 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x338/0x4e0 [ 23.146231] #1: 00000000ecf0c3b4 (_xmit_ETHER){+...}, at: dev_uc_add+0x24/0x70 [ 23.153757] [ 23.153757] stack backtrace: [ 23.158243] CPU: 0 PID: 2861 Comm: ip Not tainted 5.0.0-rc3-00013-g56c857a1b8d3 #118 [ 23.166212] Hardware name: Globalscale Marvell ESPRESSOBin Board (DT) [ 23.172843] Call trace: [ 23.175358] dump_backtrace+0x0/0x188 [ 23.179116] show_stack+0x14/0x20 [ 23.182524] dump_stack+0xb4/0xec [ 23.185928] __lock_acquire+0x123c/0x1860 [ 23.190048] lock_acquire+0xc8/0x248 [ 23.193724] _raw_spin_lock_bh+0x40/0x58 [ 23.197755] dev_set_rx_mode+0x1c/0x38 [ 23.201607] dev_set_promiscuity+0x3c/0x50 [ 23.205820] dsa_slave_change_rx_flags+0x5c/0x70 [ 23.210567] __dev_set_promiscuity+0x148/0x1e0 [ 23.215136] __dev_set_rx_mode+0x74/0x98 [ 23.219167] dev_uc_add+0x54/0x70 [ 23.222575] macvlan_open+0x170/0x1d0 [ 23.226336] __dev_open+0xe0/0x160 [ 23.229830] __dev_change_flags+0x16c/0x1b8 [ 23.234132] dev_change_flags+0x20/0x60 [ 23.238074] do_setlink+0x2d0/0xc50 [ 23.241658] __rtnl_newlink+0x5f8/0x6e8 [ 23.245601] rtnl_newlink+0x50/0x78 [ 23.249184] rtnetlink_rcv_msg+0x360/0x4e0 [ 23.253397] netlink_rcv_skb+0xe8/0x130 [ 23.257338] rtnetlink_rcv+0x14/0x20 [ 23.261012] netlink_unicast+0x190/0x210 [ 23.265043] netlink_sendmsg+0x288/0x350 [ 23.269075] sock_sendmsg+0x18/0x30 [ 23.272659] ___sys_sendmsg+0x29c/0x2c8 [ 23.276602] __sys_sendmsg+0x60/0xb8 [ 23.280276] __arm64_sys_sendmsg+0x1c/0x28 [ 23.284488] el0_svc_common+0xd8/0x138 [ 23.288340] el0_svc_handler+0x24/0x80 [ 23.292192] el0_svc+0x8/0xc This looks fairly harmless (no actual deadlock occurs), and is fixed in a similar way to c6894dec ("bridge: fix lockdep addr_list_lock false positive splat") by putting the addr_list_lock in its own lockdep class. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rundong Ge authored
The unbalance of master's promiscuity or allmulti will happen after ifdown and ifup a slave interface which is in a bridge. When we ifdown a slave interface , both the 'dsa_slave_close' and 'dsa_slave_change_rx_flags' will clear the master's flags. The flags of master will be decrease twice. In the other hand, if we ifup the slave interface again, since the slave's flags were cleared the 'dsa_slave_open' won't set the master's flag, only 'dsa_slave_change_rx_flags' that triggered by 'br_add_if' will set the master's flags. The flags of master is increase once. Only propagating flag changes when a slave interface is up makes sure this does not happen. The 'vlan_dev_change_rx_flags' had the same problem and was fixed, and changes here follows that fix. Fixes: 91da11f8 ("net: Distributed Switch Architecture protocol support") Signed-off-by: Rundong Ge <rdong.ge@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 04 Feb, 2019 18 commits
-
-
David S. Miller authored
Julian Wiedmann says: ==================== s390/qeth: fixes 2019-02-04 please apply the following four fixes to -net. Patch 1 takes care of a common resource leak in various error paths, while the second patch fixes a misordered kfree when cleaning up after an error. The other two patches ensure that there's no stale work dangling on workqueues when the qeth device has already been offlined and/or removed. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Julian Wiedmann authored
Work for Bridgeport events is currently placed on a driver-wide workqueue. If the card is removed and freed while any such work is still active, this causes a use-after-free. So put the events on a per-card queue, where we can control their lifetime. As we also don't want stale events to last beyond an offline & online cycle, flush this queue when setting the card offline. Fixes: b4d72c08 ("qeth: bridgeport support - basic control") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Julian Wiedmann authored
A card's close_dev work is scheduled on a driver-wide workqueue. If the card is removed and freed while the work is still active, this causes a use-after-free. So make sure that the work is completed before freeing the card. Fixes: 0f54761d ("qeth: Support VEPA mode") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Julian Wiedmann authored
The error path in qeth_alloc_qdio_buffers() that takes care of cleaning up the Output Queues is buggy. It first frees the queue, but then calls qeth_clear_outq_buffers() with that very queue struct. Make the call to qeth_clear_outq_buffers() part of the free action (in the correct order), and while at it fix the naming of the helper. Fixes: 0da9581d ("qeth: exploit asynchronous delivery of storage blocks") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Julian Wiedmann authored
Whenever we fail before/while starting an IO, make sure to release the IO buffer. Usually qeth_irq() would do this for us, but if the IO doesn't even start we obviously won't get an interrupt for it either. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Petr Machata authored
In fl_change(), when adding a new rule (i.e. fold == NULL), a driver may reject the new rule, for example due to resource exhaustion. By that point, the new rule was already assigned a mask, and it was added to that mask's hash table. The clean-up path that's invoked as a result of the rejection however neglects to undo the hash table addition, and proceeds to free the new rule, thus leaving a dangling pointer in the hash table. Fix by removing fnew from the mask's hash table before it is freed. Fixes: 35cc3cef ("net/sched: cls_flower: Reject duplicated rules also under skip_sw") Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'wireless-drivers-for-davem-2019-02-04' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 5.0 First set of small, but importnat, fixes for 5.0. iwlwifi * fix a build regression introduced in 5.0-rc1 wlcore * fix a firmware regression from v4.18-rc1 mt76x0 * fix for configuring tx power from user space ath10k * fix wcn3990 regression from v4.20-rc1 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Ursula Braun says: ==================== net/smc: fixes 2019-02-04 here are more fixes in the smc code for the net tree: Patch 1 fixes an IB-related problem with SMCR. Patch 2 fixes a cursor problem for one-way traffic. Patch 3 fixes a problem with RMB-reusage. Patch 4 fixes a closing issue. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ursula Braun authored
If some kind of closing is received from the peer while still in state SMC_INIT, it means the peer has had an active connection and closed the socket quickly before listen_work finished. This should not result in a shortcut from state SMC_INIT to state SMC_CLOSED. This patch adds the socket to the accept queue in state SMC_APPCLOSEWAIT1. The socket reaches state SMC_CLOSED once being accepted and closed with smc_release(). Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ursula Braun authored
Once RMBs are flagged as unused they are candidates for reuse. Thus the LLC DELETE RKEY operaton should be made before flagging the RMB as unused. Fixes: c7674c00 ("net/smc: unregister rkeys of unused buffer") Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ursula Braun authored
In some scenarios a separate consumer cursor update is necessary. The decision is made in smc_tx_consumer_cursor_update(). The sender_free computation could be wrong: The rx confirmed cursor is always smaller than or equal to the rx producer cursor. The parameters in the smc_curs_diff() call have to be exchanged, otherwise sender_free might even be negative. And if more data arrives local_rx_ctrl.prod might be updated, enabling a cursor difference between local_rx_ctrl.prod and rx confirmed cursor larger than the RMB size. This case is not covered by smc_curs_diff(). Thus function smc_curs_diff_large() is introduced here. If a recvmsg() is processed in parallel, local_tx_ctrl.cons might change during smc_cdc_msg_send. Make sure rx_curs_confirmed is updated with the actually sent local_tx_ctrl.cons value. Fixes: e82f2e31 ("net/smc: optimize consumer cursor updates") Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ursula Braun authored
The work requests for rdma writes are built in local variables within function smc_tx_rdma_write(). This violates the rule that the work request storage has to stay till the work request is confirmed by a completion queue response. This patch introduces preallocated memory for these work requests. The storage is allocated, once a link (and thus a queue pair) is established. Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sebastian Andrzej Siewior authored
During sendmsg() a cloned skb is saved via dp83640_txtstamp() in ->tx_queue. After the NIC sends this packet, the PHY will reply with a timestamp for that TX packet. If the cable is pulled at the right time I don't see that packet. It might gets flushed as part of queue shutdown on NIC's side. Once the link is up again then after the next sendmsg() we enqueue another skb in dp83640_txtstamp() and have two on the list. Then the PHY will send a reply and decode_txts() attaches it to the first skb on the list. No crash occurs since refcounting works but we are one packet behind. linuxptp/ptp4l usually closes the socket and opens a new one (in such a timeout case) so those "stale" replies never get there. However it does not resume normal operation anymore. Purge old skbs in decode_txts(). Fixes: cb646e2b ("ptp: Added a clock driver for the National Semiconductor PHYTER.") Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pablo Neira Ayuso authored
Anonymous sets that are bound to rules from the same transaction trigger a kernel splat from the abort path due to double set list removal and double free. This patch updates the logic to search for the transaction that is responsible for creating the set and disable the set list removal and release, given the rule is now responsible for this. Lookup is reverse since the transaction that adds the set is likely to be at the tail of the list. Moreover, this patch adds the unbind step to deliver the event from the commit path. This should not be done from the worker thread, since we have no guarantees of in-order delivery to the listener. This patch removes the assumption that both activate and deactivate callbacks need to be provided. Fixes: cd5125d8 ("netfilter: nf_tables: split set destruction in deactivate and destroy phase") Reported-by: Mikhail Morfikov <mmorfikov@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Martynas Pumputis authored
It is possible that two concurrent packets originating from the same socket of a connection-less protocol (e.g. UDP) can end up having different IP_CT_DIR_REPLY tuples which results in one of the packets being dropped. To illustrate this, consider the following simplified scenario: 1. Packet A and B are sent at the same time from two different threads by same UDP socket. No matching conntrack entry exists yet. Both packets cause allocation of a new conntrack entry. 2. get_unique_tuple gets called for A. No clashing entry found. conntrack entry for A is added to main conntrack table. 3. get_unique_tuple is called for B and will find that the reply tuple of B is already taken by A. It will allocate a new UDP source port for B to resolve the clash. 4. conntrack entry for B cannot be added to main conntrack table because its ORIGINAL direction is clashing with A and the REPLY directions of A and B are not the same anymore due to UDP source port reallocation done in step 3. This patch modifies nf_conntrack_tuple_taken so it doesn't consider colliding reply tuples if the IP_CT_DIR_ORIGINAL tuples are equal. [ Florian: simplify patch to not use .allow_clash setting and always ignore identical flows ] Signed-off-by: Martynas Pumputis <martynas@weave.works> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Florian Westphal authored
Check basic nat/redirect/masquerade for ipv4 and ipv6. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Naresh Kamboju authored
In selftests the config fragment for netfilter was added as NF_TABLES_INET=y and this patch correct it as CONFIG_NF_TABLES_INET=y Signed-off-by: Naresh Kamboju <naresh.kamboju@linaro.org> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Toshiaki Makita authored
Previously virtnet_xdp_xmit() did not account for device tx counters, which caused confusions. To be consistent with SKBs, account them on freeing xdp_frames. Reported-by: David Ahern <dsahern@gmail.com> Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-