An error occurred fetching the project authors.
- 14 Sep, 2020 2 commits
-
-
Paolo Abeni authored
This is a prerequisite to allow receiving data from multiple subflows without re-injection. Instead of dropping the OoO - "future" data in subflow_check_data_avail(), call into __mptcp_move_skbs() and let the msk drop that. To avoid code duplication factor out the mptcp_subflow_discard_data() helper. Note that __mptcp_move_skbs() can now find multiple subflows with data avail (comprising to-be-discarded data), so must update the byte counter incrementally. v1 -> v2: - fix checkpatch issues (unsigned -> unsigned int) Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
Currently, when checking for the 'msk is writable' condition, we look at the individual subflows write space. That works well while we send data via a single subflow, but will not as soon as we will enable concurrent xmit on multiple subflows. With this change msk becomes writable when the following conditions hold: - the socket has some free write space - there is at least a subflow with write free space Additionally we need to set the NOSPACE bit on all subflows before blocking. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 31 Aug, 2020 1 commit
-
-
YueHaibing authored
There is no caller in tree any more. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 26 Aug, 2020 1 commit
-
-
Florian Westphal authored
After subflow lock is dropped, more wmem might have been made available. This fixes a deadlock in mptcp_connect.sh 'mmap' mode: wmem is exhausted. But as the mptcp socket holds on to already-acked data (for retransmit) no wakeup will occur. Using 'goto restart' calls mptcp_clean_una(sk) which will free pages that have been acked completely in the mean time. Fixes: fb529e62 ("mptcp: break and restart in case mptcp sndbuf is full") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 23 Aug, 2020 1 commit
-
-
Gustavo A. R. Silva authored
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-throughSigned-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
-
- 17 Aug, 2020 1 commit
-
-
Florian Westphal authored
This fix wasn't correct: When this function is invoked from the retransmission worker, the iterator contains garbage and resetting it causes a crash. As the work queue should not be performance critical also zero the msghdr struct. Fixes: 35759383 "(mptcp: sendmsg: reset iter on error)" Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 14 Aug, 2020 1 commit
-
-
Florian Westphal authored
Once we've copied data from the iterator we need to revert in case we end up not sending any data. This bug doesn't trigger with normal 'poll' based tests, because we only feed a small chunk of data to kernel after poll indicated POLLOUT. With blocking IO and large writes this triggers. Receiver ends up with less data than it should get. Fixes: 72511aab ("mptcp: avoid blocking in tcp_sendpages") Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 04 Aug, 2020 2 commits
-
-
Paolo Abeni authored
In case of memory pressure, mptcp_sendmsg() may call sk_stream_wait_memory() after succesfully xmitting some bytes. If the latter fails we currently return to the user-space the error code, ignoring the succeful xmit. Address the issue always checking for the xmitted bytes before mptcp_sendmsg() completes. Fixes: f296234c ("mptcp: Add handling of incoming MP_JOIN requests") Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Geliang Tang authored
Use mptcp_for_each_subflow in mptcp_stream_accept instead of open-coding. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 29 Jul, 2020 9 commits
-
-
Mat Martineau authored
The MPTCP socket's write_seq member can be read without the msk lock held, so use WRITE_ONCE() to store it. Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mat Martineau authored
The MPTCP socket's write_seq member should be read with READ_ONCE() when the msk lock is not held. Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mat Martineau authored
RFC 8684 appendix D describes the connection state machine for MPTCP. This patch implements the DATA_FIN / DATA_ACK exchanges and MPTCP-level socket state changes described in that appendix, rather than simply sending DATA_FIN along with TCP FIN when disconnecting subflows. DATA_FIN is now sent and acknowledged before shutting down the subflows. Received DATA_FIN information (if not part of a data packet) is written to the MPTCP socket when the incoming DSS option is parsed by the subflow, and the MPTCP worker is scheduled to process the flag. DATA_FIN received as part of a full DSS mapping will be handled when the mapping is processed. The DATA_FIN is acknowledged by the worker if the reader is caught up. If there is still data to be moved to the MPTCP-level queue, ack_seq will be incremented to account for the DATA_FIN when it reaches the end of the stream and a DATA_ACK will be sent to the peer. Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mat Martineau authored
After DATA_FIN has been sent, the peer will acknowledge it. An ack of the relevant MPTCP-level sequence number will update the MPTCP connection state appropriately. Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mat Martineau authored
This will be used to transition to the appropriate state on close and determine if a DATA_FIN needs to be sent for that state transition. Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mat Martineau authored
Incoming DATA_FIN headers need to propagate the presence of the DATA_FIN bit and the associated sequence number to the MPTCP layer, even when arriving on a bare ACK that does not get added to the receive queue. Add structure members to store the DATA_FIN information and helpers to set and check those values. Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mat Martineau authored
Since DATA_FIN information is the same for every subflow, store it only in the mptcp_sock. Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mat Martineau authored
mptcp_close() acquires the msk lock, so it clearly should not be held before the function is called. Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mat Martineau authored
A MPTCP socket where sending has been shut down should not attempt to send additional data, since DATA_FIN has already been sent. Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 27 Jul, 2020 1 commit
-
-
Matthieu Baerts authored
Unblocking sockets used for outgoing connections were not containing inet info about the initial connection due to a typo there: the value of "err" variable is negative in the kernelspace. This fixes the creation of additional subflows where the remote port has to be reused if the other host didn't announce another one. This also fixes inet_diag showing blank info about MPTCP sockets from unblocking sockets doing a connect(). Fixes: 41be81a8 ("mptcp: fix unblocking connect()") Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 24 Jul, 2020 2 commits
-
-
Christoph Hellwig authored
Rework the remaining setsockopt code to pass a sockptr_t instead of a plain user pointer. This removes the last remaining set_fs(KERNEL_DS) outside of architecture specific code. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> [ieee802154] Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christoph Hellwig authored
Pass a sockptr_t to prepare for set_fs-less handling of the kernel pointer from bpf-cgroup. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 23 Jul, 2020 4 commits
-
-
Paolo Abeni authored
Currently accepted msk sockets become established only after accept() returns the new sk to user-space. As MP_JOIN request are refused as per RFC spec on non fully established socket, the above causes mp_join self-tests instabilities. This change lets the msk entering the established status as soon as it receives the 3rd ack and propagates the first subflow fully established status on the msk socket. Finally we can change the subflow acceptance condition to take in account both the sock state and the msk fully established flag. Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Tested-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
In the unlikely event of a failure at connect time, we currently clear the request_mptcp flag - so that the MPC handshake is not started at all, but the msk is not explicitly marked as fallback. This would lead to later insertion of wrong DSS options in the xmitted packets, in violation of RFC specs and possibly fooling the peer. Fixes: e1ff9e82 ("net: mptcp: improve fallback to TCP") Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Tested-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
When updating a partially acked data fragment, we actually corrupt it. This is irrelevant till we send data on a single subflow, as retransmitted data, if any are discarded by the peer as duplicate, but it will cause data corruption as soon as we will start creating non backup subflows. Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Tested-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
Currently we do not init the subflow write sequence for MP_JOIN subflows. This will cause bad mapping being generated as soon as we will use non backup subflow. Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Tested-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 20 Jul, 2020 1 commit
-
-
Christoph Hellwig authored
Add the compat handling to sock_common_{get,set}sockopt instead, keyed of in_compat_syscall(). This allow to remove the now unused ->compat_{get,set}sockopt methods from struct proto_ops. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net> Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 07 Jul, 2020 1 commit
-
-
Florian Westphal authored
We can re-use the existing work queue to handle path management instead of a dedicated work queue. Just move pm_worker to protocol.c, call it from the mptcp worker and get rid of the msk lock (already held). Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 05 Jul, 2020 3 commits
-
-
Florian Westphal authored
Without this, Opensshd fails to open an ipv6 socket listening socket: error: setsockopt IPV6_V6ONLY: Operation not supported error: Bind to port 22 on :: failed: Address already in use. Opensshd opens an ipv4 and and ipv6 listening socket, but because IPV6_V6ONLY setsockopt fails, the port number is already in use. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Florian Westphal authored
This will e.g. make 'sshd restart' work when MPTCP is used, as we will now set this option on the listener socket instead of only the mptcp socket (where it has no effect). We still need to copy the setting to the master socket so that a subsequent getsockopt() returns the expected value. Reported-by: Christoph Paasch <cpaasch@apple.com> Suggested-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Florian Westphal authored
setsockopt(mptcp_fd, SOL_SOCKET, ...)... appears to work (returns 0), but it has no effect -- this is because the MPTCP layer never has a chance to copy the settings to the subflow socket. Skip the generic handling for the mptcp case and instead call the mptcp specific handler instead for SOL_SOCKET too. Next patch adds more specific handling for SOL_SOCKET to mptcp. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 02 Jul, 2020 1 commit
-
-
Florian Westphal authored
When mptcp is used, userspace doesn't read from the tcp (subflow) socket but from the parent (mptcp) socket receive queue. skbs are moved from the subflow socket to the mptcp rx queue either from 'data_ready' callback (if mptcp socket can be locked), a work queue, or the socket receive function. This means tcp_rcv_space_adjust() is never called and thus no receive buffer size auto-tuning is done. An earlier (not merged) patch added tcp_rcv_space_adjust() calls to the function that moves skbs from subflow to mptcp socket. While this enabled autotuning, it also meant tuning was done even if userspace was reading the mptcp socket very slowly. This adds mptcp_rcv_space_adjust() and calls it after userspace has read data from the mptcp socket rx queue. Its very similar to tcp_rcv_space_adjust, with two differences: 1. The rtt estimate is the largest one observed on a subflow 2. The rcvbuf size and window clamp of all subflows is adjusted to the mptcp-level rcvbuf. Otherwise, we get spurious drops at tcp (subflow) socket level if the skbs are not moved to the mptcp socket fast enough. Before: time mptcp_connect.sh -t -f $((4*1024*1024)) -d 300 -l 0.01% -r 0 -e "" -m mmap [..] ns4 MPTCP -> ns3 (10.0.3.2:10108 ) MPTCP (duration 40823ms) [ OK ] ns4 MPTCP -> ns3 (10.0.3.2:10109 ) TCP (duration 23119ms) [ OK ] ns4 TCP -> ns3 (10.0.3.2:10110 ) MPTCP (duration 5421ms) [ OK ] ns4 MPTCP -> ns3 (dead:beef:3::2:10111) MPTCP (duration 41446ms) [ OK ] ns4 MPTCP -> ns3 (dead:beef:3::2:10112) TCP (duration 23427ms) [ OK ] ns4 TCP -> ns3 (dead:beef:3::2:10113) MPTCP (duration 5426ms) [ OK ] Time: 1396 seconds After: ns4 MPTCP -> ns3 (10.0.3.2:10108 ) MPTCP (duration 5417ms) [ OK ] ns4 MPTCP -> ns3 (10.0.3.2:10109 ) TCP (duration 5427ms) [ OK ] ns4 TCP -> ns3 (10.0.3.2:10110 ) MPTCP (duration 5422ms) [ OK ] ns4 MPTCP -> ns3 (dead:beef:3::2:10111) MPTCP (duration 5415ms) [ OK ] ns4 MPTCP -> ns3 (dead:beef:3::2:10112) TCP (duration 5422ms) [ OK ] ns4 TCP -> ns3 (dead:beef:3::2:10113) MPTCP (duration 5423ms) [ OK ] Time: 296 seconds Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 30 Jun, 2020 5 commits
-
-
Paolo Abeni authored
mptcp_poll always return POLLOUT for unblocking connect(), ensure that the socket is a suitable state. The MPTCP_DATA_READY bit is never cleared on accept: ensure we don't leave mptcp_accept() with an empty accept queue and such bit set. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
Currently __mptcp_tcp_fallback() always return NULL on incoming connections, because MPTCP does not create the additional socket for the first subflow. Since the previous commit no __mptcp_tcp_fallback() caller needs a struct socket, so let __mptcp_tcp_fallback() return the first subflow sock and cope correctly even with incoming connections. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
This cleans the code a bit and makes the behavior more consistent. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
This cleanup the code a bit and avoid corrupted states on weird syscall sequence (accept(), connect()). Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Davide Caratti authored
Keep using MPTCP sockets and a use "dummy mapping" in case of fallback to regular TCP. When fallback is triggered, skip addition of the MPTCP option on send. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/11 Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/22Co-developed-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 26 Jun, 2020 2 commits
-
-
Paolo Abeni authored
Replace the radix tree with a hash table allocated at boot time. The radix tree has some shortcoming: a single lock is contented by all the mptcp operation, the lookup currently use such lock, and traversing all the items would require a lock, too. With hash table instead we trade a little memory to address all the above - a per bucket lock is used. To hash the MPTCP sockets, we re-use the msk' sk_node entry: the MPTCP sockets are never hashed by the stack. Replace the existing hash proto callbacks with a dummy implementation, annotating the above constraint. Additionally refactor the token creation to code to: - limit the number of consecutive attempts to a fixed maximum. Hitting a hash bucket with a long chain is considered a failed attempt - accept() no longer can fail to token management. - if token creation fails at connect() time, we do fallback to TCP (before the connection was closed) v1 -> v2: - fix "no newline at end of file" - Jakub Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
Add the missing annotation in some setup-only functions. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 10 Jun, 2020 1 commit
-
-
Paolo Abeni authored
The msk sk_shutdown flag is set by a workqueue, possibly introducing some delay in user-space notification. If the last subflow carries some data with the fin packet, the user space can wake-up before RCV_SHUTDOWN is set. If it executes unblocking recvmsg(), it may return with an error instead of eof. Address the issue explicitly checking for eof in recvmsg(), when no data is found. Fixes: 59832e24 ("mptcp: subflow: check parent mptcp socket on subflow state change") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 31 May, 2020 1 commit
-
-
Paolo Abeni authored
Currently we remote the msk from the token container only via mptcp_close(). The MPTCP master socket can be destroyed also via other paths (e.g. if not yet accepted, when shutting down the listener socket). When we hit the latter scenario, dangling msk references are left into the token container, leading to memory corruption and/or UaF. This change addresses the issue by moving the token removal into the msk destructor. Fixes: 79c0949e ("mptcp: Add key generation and token tree") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-