- 26 Sep, 2017 5 commits
-
-
Naohiro Aota authored
__endio_write_update_ordered() repeats the search until it reaches the end of the specified range. This works well with direct IO path, because before the function is called, it's ensured that there are ordered extents filling whole the range. It's not the case, however, when it's called from run_delalloc_range(): it is possible to have error in the midle of the loop in e.g. run_delalloc_nocow(), so that there exisits the range not covered by any ordered extents. By cleaning such "uncomplete" range, __endio_write_update_ordered() stucks at offset where there're no ordered extents. Since the ordered extents are created from head to tail, we can stop the search if there are no offset progress. Fixes: 52427260 ("btrfs: Handle delalloc error correctly to avoid ordered extent hang") Cc: <stable@vger.kernel.org> # 4.12 Signed-off-by:
Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by:
Qu Wenruo <quwenruo.btrfs@gmx.com> Reviewed-by:
Josef Bacik <jbacik@fb.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Naohiro Aota authored
Commit 52427260 ("btrfs: Handle delalloc error correctly to avoid ordered extent hang") introduced btrfs_cleanup_ordered_extents() to cleanup submitted ordered extents. However, it does not clear the ordered bit (Private2) of corresponding pages. Thus, the following BUG occurs from free_pages_check_bad() (on btrfs/125 with nospace_cache). BUG: Bad page state in process btrfs pfn:3fa787 page:ffffdf2acfe9e1c0 count:0 mapcount:0 mapping: (null) index:0xd flags: 0x8000000000002008(uptodate|private_2) raw: 8000000000002008 0000000000000000 000000000000000d 00000000ffffffff raw: ffffdf2acf5c1b20 ffffb443802238b0 0000000000000000 0000000000000000 page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set bad because of flags: 0x2000(private_2) This patch clears the flag same as other places calling btrfs_dec_test_ordered_pending() for every page in the specified range. Fixes: 52427260 ("btrfs: Handle delalloc error correctly to avoid ordered extent hang") Cc: <stable@vger.kernel.org> # 4.12 Signed-off-by:
-
Omar Sandoval authored
fs_info->super_copy->{node,sector}size are little-endian, but the ioctl should return the values in native endianness. Use the cached values in btrfs_fs_info instead. Found with sparse. Fixes: 80a773fb ("btrfs: retrieve more info from FS_INFO ioctl") Signed-off-by:Omar Sandoval <osandov@fb.com> Reviewed-by:
-
Liu Bo authored
flush_epd_write_bio() sets bio->bi_opf by itself to honor REQ_SYNC, but it's not needed at all since bio->bi_opf has set up properly in both __extent_writepage() and write_one_eb(), and in the case of write_one_eb(), it also sets REQ_META, which we will lose in flush_epd_write_bio(). This remove this unnecessary bio->bi_opf setting. Signed-off-by:
Liu Bo <bo.li.liu@oracle.com> Reviewed-by:
-
Liu Bo authored
This updates btrfs to use the helper wbc_to_write_flags which has been applied in ext4/xfs/f2fs/block. Please note that, with this, btrfs's dirty pages written by a writeback job will carry the flag REQ_BACKGROUND, which is currently used by writeback-throttle to determine whether it should go to get a request or wait. Signed-off-by:
-
- 22 Aug, 2017 1 commit
-
-
David Sterba authored
The superblock is also metadata of the filesystem so the relevant IO should be tagged as such. We also tag it as high priority, as it's the last block committed for metadata from a given transaction. Any delays would effectively block the whole transaction, also blocking any other operation holding the device_list_mutex. Reviewed-by:
-
- 21 Aug, 2017 24 commits
-
-
Nikolay Borisov authored
Commit 38851cc1 ("Btrfs: implement unlocked dio write") implemented unlocked dio write, allowing multiple dio writers to write to non-overlapping, and non-eof-extending regions. In doing so it also introduced a broken memory barrier. It is broken due to 2 things: 1. Memory barriers _MUST_ always be paired, this is clearly not the case here 2. Checkpatch actually produces a warning if a memory barrier is introduced that doesn't have a comment explaining how it's being paired. Specifically for inode::i_dio_count that's wrapped inside inode_dio_begin, there is no explicit barrier semantics attached, so removing is fine as the atomic is used in common the waiter/wakeup pattern. Signed-off-by:
Nikolay Borisov <nborisov@suse.com> Reviewed-by:
-
Nikolay Borisov authored
Currently this function is always called with the object id of the root key of the chunk_tree, which is always BTRFS_CHUNK_TREE_OBJECTID. So let's subsume it straight into the function itself. No functional change. Signed-off-by:
-
Nikolay Borisov authored
THe function is always called with chunk_objectid set to BTRFS_FIRST_CHUNK_TREE_OBJECTID. Let's collapse the parameter in the function itself. No functional changes. Signed-off-by:
-
Jeff Mahoney authored
btrfs_del_roots always uses the tree_root. Let's pass fs_info instead. Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Reviewed-by:
-
Liu Bo authored
Every shared ref has a parent tree block, which can be get from btrfs_extent_inline_ref_offset(). And the tree block must be aligned to the nodesize, so we'd know this inline ref is not valid if this block's bytenr is not aligned to the nodesize, in which case, most likely the ref type has been misused. This adds the above mentioned check and also updates print_extent_item() called by btrfs_print_leaf() to point out the invalid ref while printing the tree structure. Signed-off-by:
-
Liu Bo authored
The BUG_ON() can be triggered when the caller is processing an invalid extent inline ref, e.g. a shared data ref is offered instead of an extent data ref, such that it tries to find a non-existent tree block and then btrfs_search_slot returns 1 for no such item. This replaces the BUG_ON() with a WARN() followed by calling btrfs_print_leaf() to show more details about what's going on and returning -EINVAL to upper callers. Signed-off-by:
-
Liu Bo authored
Now that we have a helper to report invalid value of extent inline ref type, we need to quit gracefully instead of throwing out a kernel panic. Signed-off-by:
-
Liu Bo authored
btrfs_print_leaf() is used in btrfs_get_extent_inline_ref_type, so here we really want to print the invalid value of ref type instead of causing a kernel panic. Signed-off-by:
-
Liu Bo authored
Now that btrfs_get_extent_inline_ref_type() can report if type is a valid one and all callers can gracefully deal with that, we don't need to crash here. Signed-off-by:
-
Liu Bo authored
Since we have a helper which can do sanity check, this converts all btrfs_extent_inline_ref_type to it. Signed-off-by:
-
Liu Bo authored
An invalid value of extent inline ref type may be read from a malicious image which may force btrfs to crash. This adds a helper which does sanity check for the ref type, so we can know if it's sane, return he type, otherwise return an error. Signed-off-by:
-
David Sterba authored
Minor simplification, merge calls to one. Signed-off-by: -
David Sterba authored
Use proper helpers for 64bit division. Signed-off-by: -
David Sterba authored
Use proper helpers for 64bit division and then cast to narrower type. Signed-off-by: -
David Sterba authored
flush_all_writes is an atomic but does not use the semantics at all, it's just on/off indicator, we can use bool. Signed-off-by: -
Ernesto A. Fernández authored
When changing a file's acl mask, btrfs_set_acl() will first set the group bits of i_mode to the value of the mask, and only then set the actual extended attribute representing the new acl. If the second part fails (due to lack of space, for example) and the file had no acl attribute to begin with, the system will from now on assume that the mask permission bits are actual group permission bits, potentially granting access to the wrong users. Prevent this by restoring the original mode bits if __btrfs_set_acl fails. Signed-off-by:
Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com> Reviewed-by:
-
Nikolay Borisov authored
BTRFS_FIRST_CHUNK_TREE_OBJECTIS id the only objectid being used in the chunk_tree. So remove a variable which is always set to that value and collapse its usage in callees which are passed this variable. No functional changes Signed-off-by:
-
Nikolay Borisov authored
btrfs_make_block_group is always called with chunk_objectid set to BTRFS_FIRST_CHUNK_TREE_OBJECTID. There's no reason why this behavior will change anytime soon, so let's remove the argument and decrease the cognitive load when reading the code path. No functional change Signed-off-by:
-
Matthias Kaehlcke authored
There is no need for the extra pair of parentheses, remove it. This fixes the following warning when building with clang: fs/btrfs/tree-log.c:3694:10: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] if ((i == (nr - 1))) ~~^~~~~~~~~~~ Also remove the unnecessary parentheses around the substraction. Signed-off-by:Matthias Kaehlcke <mka@chromium.org> Signed-off-by:
-
Nikolay Borisov authored
btrfs_alloc_dev_extent currently unconditionally sets the uuid in the leaf block header the function is working with. This is unnecessary since this operation is peformed by the core btree handling code (splitting a node, allocating a new btree block etc). So let's remove it. Signed-off-by:
-
Hans van Kranenburg authored
This patch provides a band aid to improve the 'out of the box' behaviour of btrfs for disks that are detected as being an ssd. In a general purpose mixed workload scenario, the current ssd mode causes overallocation of available raw disk space for data, while leaving behind increasing amounts of unused fragmented free space. This situation leads to early ENOSPC problems which are harming user experience and adoption of btrfs as a general purpose filesystem. This patch modifies the data extent allocation behaviour of the ssd mode to make it behave identical to nossd mode. The metadata behaviour and additional ssd_spread option stay untouched so far. Recommendations for future development are to reconsider the current oversimplified nossd / ssd distinction and the broken detection mechanism based on the rotational attribute in sysfs and provide experienced users with a more flexible way to choose allocator behaviour for data and metadata, optimized for certain use cases, while keeping sane 'out of the box' default settings. The internals of the current btrfs code have more potential than what currently gets exposed to the user to choose from. The SSD story... In the first year of btrfs development, around early 2008, btrfs gained a mount option which enables specific functionality for filesystems on solid state devices. The first occurance of this functionality is in commit e18e4809, labeled "Add mount -o ssd, which includes optimizations for seek free storage". The effect on allocating free space for doing (data) writes is to 'cluster' writes together, writing them out in contiguous space, as opposed to a 'tetris' way of putting all separate writes into any free space fragment that fits (which is what the -o nossd behaviour does). A somewhat simplified explanation of what happens is that, when for example, the 'cluster' size is set to 2MiB, when we do some writes, the data allocator will search for a free space block that is 2MiB big, and put the writes in there. The ssd mode itself might allow a 2MiB cluster to be composed of multiple free space extents with some existing data in between, while the additional ssd_spread mount option kills off this option and requires fully free space. The idea behind this is (commit 536ac8ae): "The [...] clusters make it more likely a given IO will completely overwrite the ssd block, so it doesn't have to do an internal rwm cycle."; ssd block meaning nand erase block. So, effectively this means applying a "locality based algorithm" and trying to outsmart the actual ssd. Since then, various changes have been made to the involved code, but the basic idea is still present, and gets activated whenever the ssd mount option is active. This also happens by default, when the rotational flag as seen at /sys/block/<device>/queue/rotational is set to 0. However, there's a number of problems with this approach. First, what the optimization is trying to do is outsmart the ssd by assuming there is a relation between the physical address space of the block device as seen by btrfs and the actual physical storage of the ssd, and then adjusting data placement. However, since the introduction of the Flash Translation Layer (FTL) which is a part of the internal controller of an ssd, these attempts are futile. The use of good quality FTL in consumer ssd products might have been limited in 2008, but this situation has changed drastically soon after that time. Today, even the flash memory in your automatic cat feeding machine or your grandma's wheelchair has a full featured one. Second, the behaviour as described above results in the filesystem being filled up with badly fragmented free space extents because of relatively small pieces of space that are freed up by deletes, but not selected again as part of a 'cluster'. Since the algorithm prefers allocating a new chunk over going back to tetris mode, the end result is a filesystem in which all raw space is allocated, but which is composed of underutilized chunks with a 'shotgun blast' pattern of fragmented free space. Usually, the next problematic thing that happens is the filesystem wanting to allocate new space for metadata, which causes the filesystem to fail in spectacular ways. Third, the default mount options you get for an ssd ('ssd' mode enabled, 'discard' not enabled), in combination with spreading out writes over the full address space and ignoring freed up space leads to worst case behaviour in providing information to the ssd itself, since it will never learn that all the free space left behind is actually free. There are two ways to let an ssd know previously written data does not have to be preserved, which are sending explicit signals using discard or fstrim, or by simply overwriting the space with new data. The worst case behaviour is the btrfs ssd_spread mount option in combination with not having discard enabled. It has a side effect of minimizing the reuse of free space previously written in. Fourth, the rotational flag in /sys/ does not reliably indicate if the device is a locally attached ssd. For example, iSCSI or NBD displays as non-rotational, while a loop device on an ssd shows up as rotational. The combination of the second and third problem effectively means that despite all the good intentions, the btrfs ssd mode reliably causes the ssd hardware and the filesystem structures and performance to be choked to death. The clickbait version of the title of this story would have been "Btrfs ssd optimizations considered harmful for ssds". The current nossd 'tetris' mode (even still without discard) allows a pattern of overwriting much more previously used space, causing many more implicit discards to happen because of the overwrite information the ssd gets. The actual location in the physical address space, as seen from the point of view of btrfs is irrelevant, because the actual writes to the low level flash are reordered anyway thanks to the FTL. Changes made in the code 1. Make ssd mode data allocation identical to tetris mode, like nossd. 2. Adjust and clean up filesystem mount messages so that we can easily identify if a kernel has this patch applied or not, when providing support to end users. Also, make better use of the *_and_info helpers to only trigger messages on actual state changes. Backporting notes Notes for whoever wants to backport this patch to their 4.9 LTS kernel: * First apply commit 951e7966 "btrfs: drop the nossd flag when remounting with -o ssd", or fixup the differences manually. * The rest of the conflicts are because of the fs_info refactoring. So, for example, instead of using fs_info, it's root->fs_info in extent-tree.c Signed-off-by:Hans van Kranenburg <hans.van.kranenburg@mendix.com> Signed-off-by:
-
Lu Fengqi authored
Although this bio has no data attached, it will reach this condition (bio->bi_opf & REQ_PREFLUSH) and then update the flush_gen of dev_state in __btrfsic_submit_bio. So we should still submit it through integrity checker. Otherwise, the integrity checker will throw the following warning when I mount a newly created btrfs filesystem. [10264.755497] btrfs: attempt to write superblock which references block M @29523968 (sdb1/1111654400/0) which is not flushed out of disk's write cache (block flush_gen=1, dev->flush_gen=0)! [10264.755498] btrfs: attempt to write superblock which references block M @29523968 (sdb1/37912576/0) which is not flushed out of disk's write cache (block flush_gen=1, dev->flush_gen=0)! Signed-off-by:
Lu Fengqi <lufq.fnst@cn.fujitsu.com> Reviewed-by:
-
Filipe Manana authored
When doing an incremental send it's possible that the computed send stream contains clone operations that will fail on the receiver if the receiver has compression enabled and the clone operations target a sector sized extent that starts at a zero file offset, is not compressed on the source filesystem but ends up being compressed and inlined at the destination filesystem. Example scenario: $ mkfs.btrfs -f /dev/sdb $ mount -o compress /dev/sdb /mnt # By doing a direct IO write, the data is not compressed. $ xfs_io -f -d -c "pwrite -S 0xab 0 4K" /mnt/foobar $ btrfs subvolume snapshot -r /mnt /mnt/mysnap1 $ xfs_io -c "reflink /mnt/foobar 0 8K 4K" /mnt/foobar $ btrfs subvolume snapshot -r /mnt /mnt/mysnap2 $ btrfs send -f /tmp/1.snap /mnt/mysnap1 $ btrfs send -f /tmp/2.snap -p /mnt/mysnap1 /mnt/mysnap2 $ umount /mnt $ mkfs.btrfs -f /dev/sdc $ mount -o compress /dev/sdc /mnt $ btrfs receive -f /tmp/1.snap /mnt $ btrfs receive -f /tmp/2.snap /mnt ERROR: failed to clone extents to foobar Operation not supported The same could be achieved by mounting the source filesystem without compression and doing a buffered IO write instead of a direct IO one, and mounting the destination filesystem with compression enabled. So fix this by issuing regular write operations in the send stream instead of clone operations when the source offset is zero and the range has a length matching the sector size. Signed-off-by:
Filipe Manana <fdmanana@suse.com> Reviewed-by:
Chris Mason <clm@fb.com> Signed-off-by:
-
Liu Bo authored
There is a corner case that slips through the checkers in functions reading extent buffer, ie. if (start < eb->len) and (start + len > eb->len), then a) map_private_extent_buffer() returns immediately because it's thinking the range spans across two pages, b) and the checkers in read_extent_buffer(), WARN_ON(start > eb->len) and WARN_ON(start + len > eb->start + eb->len), both are OK in this corner case, but it'd actually try to access the eb->pages out of bounds because of (start + len > eb->len). The case is found by switching extent inline ref type from shared data ref to non-shared data ref, which is a kind of metadata corruption. It'd use the wrong helper to access the eb, eg. btrfs_extent_data_ref_root(eb, ref) is used but the %ref passing here is "struct btrfs_shared_data_ref". And if the extent item happens to be the first item in the eb, then offset/length will get over eb->len which ends up an invalid memory access. This is adding proper checks in order to avoid invalid memory access, ie. 'general protection fault', before it's too late. Reviewed-by:
-
- 18 Aug, 2017 10 commits
-
-
Nikolay Borisov authored
The buffer passed to btrfs_ioctl_tree_search* functions have to be at least sizeof(struct btrfs_ioctl_search_header). If this is not the case then the ioctl should return -EOVERFLOW and set the uarg->buf_size to the minimum required size. Currently btrfs_ioctl_tree_search_v2 would return an -EOVERFLOW error with ->buf_size being set to the value passed by user space. Fix this by removing the size check and relying on search_ioctl, which already includes it and correctly sets buf_size. Signed-off-by:
-
Nikolay Borisov authored
Currently the code checks whether we should do data checksumming in btrfs_submit_direct and the boolean result of this check is passed to btrfs_submit_direct_hook, in turn passing it to __btrfs_submit_dio_bio which actually consumes it. The last function actually has all the necessary context to figure out whether to skip the check or not, so let's move the check closer to where it's being consumed. No functional changes. Signed-off-by:
-
Filipe Manana authored
When logging an inode in full mode that has an inline compressed extent that represents a range with a size matching the sector size (currently the same as the page size), has a trailing hole and the no-holes feature is enabled, we end up failing an assertion leading to a trace like the following: [141812.031528] assertion failed: len == i_size, file: fs/btrfs/tree-log.c, line: 4453 [141812.033069] ------------[ cut here ]------------ [141812.034330] kernel BUG at fs/btrfs/ctree.h:3452! [141812.035137] invalid opcode: 0000 [#1] PREEMPT SMP [141812.035932] Modules linked in: btrfs dm_thin_pool dm_persistent_data dm_bio_prison dm_bufio dm_flakey dm_mod dax ppdev evdev ghash_clmulni_intel pcbc aesni_intel aes_x86_64 tpm_tis psmouse crypto_simd parport_pc sg pcspkr tpm_tis_core cryptd parport serio_raw glue_helper tpm i2c_piix4 i2c_core button sunrpc loop autofs4 ext4 crc16 jbd2 mbcache raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c crc32c_generic raid1 raid0 multipath linear md_mod sd_mod ata_generic virtio_scsi ata_piix floppy crc32c_intel libata scsi_mod virtio_pci virtio_ring e1000 virtio [last unloaded: btrfs] [141812.036790] CPU: 3 PID: 845 Comm: fdm-stress Tainted: G B W 4.12.3-btrfs-next-52+ #1 [141812.036790] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.2-0-g5f4c7b1-prebuilt.qemu-project.org 04/01/2014 [141812.036790] task: ffff8801e6694180 task.stack: ffffc90009004000 [141812.036790] RIP: 0010:assfail.constprop.18+0x1c/0x1e [btrfs] [141812.036790] RSP: 0018:ffffc90009007bc0 EFLAGS: 00010282 [141812.036790] RAX: 0000000000000046 RBX: ffff88017512c008 RCX: 0000000000000001 [141812.036790] RDX: ffff88023fd95201 RSI: ffffffff8182264c RDI: 00000000ffffffff [141812.036790] RBP: ffffc90009007bc0 R08: 0000000000000001 R09: 0000000000000001 [141812.036790] R10: 0000000000001000 R11: ffffffff82f5a0c9 R12: ffff88014e5947e8 [141812.036790] R13: 00000000000b4000 R14: ffff8801b234d008 R15: 0000000000000000 [141812.036790] FS: 00007fdba6ffd700(0000) GS:ffff88023fd80000(0000) knlGS:0000000000000000 [141812.036790] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [141812.036790] CR2: 00007fdb9c000010 CR3: 000000016efa2000 CR4: 00000000001406e0 [141812.036790] Call Trace: [141812.036790] btrfs_log_inode+0x9f0/0xd3d [btrfs] [141812.036790] ? __mutex_lock+0x120/0x3ce [141812.036790] btrfs_log_inode_parent+0x224/0x685 [btrfs] [141812.036790] ? lock_acquire+0x16b/0x1af [141812.036790] btrfs_log_dentry_safe+0x60/0x7b [btrfs] [141812.036790] btrfs_sync_file+0x32e/0x3f8 [btrfs] [141812.036790] vfs_fsync_range+0x8a/0x9d [141812.036790] vfs_fsync+0x1c/0x1e [141812.036790] do_fsync+0x31/0x4a [141812.036790] SyS_fdatasync+0x13/0x17 [141812.036790] entry_SYSCALL_64_fastpath+0x18/0xad [141812.036790] RIP: 0033:0x7fdbac41a47d [141812.036790] RSP: 002b:00007fdba6ffce30 EFLAGS: 00000293 ORIG_RAX: 000000000000004b [141812.036790] RAX: ffffffffffffffda RBX: ffffffff81092c9f RCX: 00007fdbac41a47d [141812.036790] RDX: 0000004cf0160a40 RSI: 0000000000000000 RDI: 0000000000000006 [141812.036790] RBP: ffffc90009007f98 R08: 0000000000000000 R09: 0000000000000010 [141812.036790] R10: 00000000000002e8 R11: 0000000000000293 R12: ffffffff8110cd90 [141812.036790] R13: ffffc90009007f78 R14: 0000000000000000 R15: 0000000000000000 [141812.036790] ? time_hardirqs_off+0x9/0x14 [141812.036790] ? trace_hardirqs_off_caller+0x1f/0xa3 [141812.036790] Code: c7 d6 61 6b a0 48 89 e5 e8 ba ef a8 e0 0f 0b 55 89 f1 48 c7 c2 6d 65 6b a0 48 89 fe 48 c7 c7 81 65 6b a0 48 89 e5 e8 9c ef a8 e0 <0f> 0b 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41 55 41 54 49 89 [141812.036790] RIP: assfail.constprop.18+0x1c/0x1e [btrfs] RSP: ffffc90009007bc0 [141812.084448] ---[ end trace 44e472684c7a32cc ]--- Which happens because the code that logs a trailing hole when the no-holes feature is enabled, did not consider that a compressed inline extent can represent a range with a size matching the sector size, in which case expanding the inode's i_size, through a truncate operation, won't lead to padding with zeroes the page that represents the inline extent, and therefore the inline extent remains after the truncation. Fix this by adapting the assertion to accept inline extents representing data with a sector size length if, and only if, the inline extents are compressed. A sample and trivial reproducer (for systems with a 4K page size) for this issue: mkfs.btrfs -O no-holes -f /dev/sdc mount -o compress /dev/sdc /mnt xfs_io -f -c "pwrite -S 0xab 0 4K" /mnt/foobar sync xfs_io -c "truncate 32K" /mnt/foobar xfs_io -c "fsync" /mnt/foobar Signed-off-by:
-
Filipe Manana authored
If the range being cleared was not marked for defrag and we are not about to clear the range from the defrag status, we don't need to lock and unlock the inode. Signed-off-by:
Wang Shilong <wangshilong1991@gmail.com> Signed-off-by:
-
Colin Ian King authored
The error return variable ret is initialized to zero and then is checked to see if it is non-zero in the if-block that follows it. It is therefore impossible for ret to be non-zero after the if-block hence the check is redundant and can be removed. Detected by CoverityScan, CID#1021040 ("Logically dead code") Signed-off-by:Colin Ian King <colin.king@canonical.com> Reviewed-by:
-
Nikolay Borisov authored
The internal free space tree management routines are always exposed for testing purposes. Make them dependent on SANITY_TESTS being on so that they are exposed only when they really have to. Signed-off-by:
-
Nikolay Borisov authored
This variable was added in 1abe9b8a ("Btrfs: add initial tracepointi support for btrfs"), yet it never really got used, only assigned to. So let's remove it. Signed-off-by:
-
Nikolay Borisov authored
We have a WARN_ON(!var) inside an if branch which is executed (among others) only when var is true. Signed-off-by:
-
Anand Jain authored
We aren't using this define, so removing it. Signed-off-by:
Anand Jain <anand.jain@oracle.com> Reviewed-by:
-
Anand Jain authored
We have define for FSID size so use it. Signed-off-by:
-
