1. 28 Jan, 2014 40 commits
    • Miao Xie's avatar
      Btrfs: introduce the delayed inode ref deletion for the single link inode · 67de1176
      Miao Xie authored
      The inode reference item is close to inode item, so we insert it simultaneously
      with the inode item insertion when we create a file/directory.. In fact, we also
      can handle the inode reference deletion by the same way. So we made this patch to
      introduce the delayed inode reference deletion for the single link inode(At most
      case, the file doesn't has hard link, so we don't take the hard link into account).
      
      This function is based on the delayed inode mechanism. After applying this patch,
      we can reduce the time of the file/directory deletion by ~10%.
      Signed-off-by: default avatarMiao Xie <miaox@cn.fujitsu.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      67de1176
    • Miao Xie's avatar
      7cf35d91
    • Miao Xie's avatar
      Btrfs: remove btrfs_end_transaction_dmeta() · a56dbd89
      Miao Xie authored
      Two reasons:
      - btrfs_end_transaction_dmeta() is the same as btrfs_end_transaction_throttle()
        so it is unnecessary.
      - All the delayed items should be dealt in the current transaction, so the
        workers should not commit the transaction, instead, deal with the delayed
        items as many as possible.
      
      So we can remove btrfs_end_transaction_dmeta()
      Signed-off-by: default avatarMiao Xie <miaox@cn.fujitsu.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      a56dbd89
    • Miao Xie's avatar
      Btrfs: cleanup code of btrfs_balance_delayed_items() · 0353808c
      Miao Xie authored
      - move the condition check for wait into a function
      - use wait_event_interruptible instead of prepare-schedule-finish process
      Signed-off-by: default avatarMiao Xie <miaox@cn.fujitsu.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      0353808c
    • Miao Xie's avatar
      Btrfs: don't run delayed nodes again after all nodes flush · 4dd466d3
      Miao Xie authored
      If the number of the delayed items is greater than the upper limit, we will
      try to flush all the delayed items. After that, it is unnecessary to run
      them again because they are being dealt with by the wokers or the number of
      them is less than the lower limit.
      Signed-off-by: default avatarMiao Xie <miaox@cn.fujitsu.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      4dd466d3
    • Miao Xie's avatar
      Btrfs: remove residual code in delayed inode async helper · 74c40f92
      Miao Xie authored
      Before applying the patch
        commit de3cb945
        title: Btrfs: improve the delayed inode throttling
      
      We need requeue the async work after the current work was done, it
      introduced a deadlock problem. So we wrote the code that this patch
      removes to avoid the above problem. But after applying the above
      patch, the deadlock problem didn't exist. So we should remove that
      fix code.
      Signed-off-by: default avatarMiao Xie <miaox@cn.fujitsu.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      74c40f92
    • Frank Holton's avatar
      Btrfs: convert printk to btrfs_ and fix BTRFS prefix · efe120a0
      Frank Holton authored
      Convert all applicable cases of printk and pr_* to the btrfs_* macros.
      
      Fix all uses of the BTRFS prefix.
      Signed-off-by: default avatarFrank Holton <fholton@gmail.com>
      Signed-off-by: default avatarJosef Bacik <jbacik@fb.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      efe120a0
    • Filipe David Borba Manana's avatar
      Btrfs: fix tree mod logging · 5de865ee
      Filipe David Borba Manana authored
      While running the test btrfs/004 from xfstests in a loop, it failed
      about 1 time out of 20 runs in my desktop. The failure happened in
      the backref walking part of the test, and the test's error message was
      like this:
      
        btrfs/004 93s ... [failed, exit status 1] - output mismatch (see /home/fdmanana/git/hub/xfstests_2/results//btrfs/004.out.bad)
            --- tests/btrfs/004.out	2013-11-26 18:25:29.263333714 +0000
            +++ /home/fdmanana/git/hub/xfstests_2/results//btrfs/004.out.bad	2013-12-10 15:25:10.327518516 +0000
            @@ -1,3 +1,8 @@
             QA output created by 004
             *** test backref walking
            -*** done
            +unexpected output from
            +	/home/fdmanana/git/hub/btrfs-progs/btrfs inspect-internal logical-resolve -P 141512704 /home/fdmanana/btrfs-tests/scratch_1
            +expected inum: 405, expected address: 454656, file: /home/fdmanana/btrfs-tests/scratch_1/snap1/p0/d6/d3d/d156/fce, got:
            +
             ...
             (Run 'diff -u tests/btrfs/004.out /home/fdmanana/git/hub/xfstests_2/results//btrfs/004.out.bad' to see the entire diff)
        Ran: btrfs/004
        Failures: btrfs/004
        Failed 1 of 1 tests
      
      But immediately after the test finished, the btrfs inspect-internal command
      returned the expected output:
      
        $ btrfs inspect-internal logical-resolve -P 141512704 /home/fdmanana/btrfs-tests/scratch_1
        inode 405 offset 454656 root 258
        inode 405 offset 454656 root 5
      
      It turned out this was because the btrfs_search_old_slot() calls performed
      during backref walking (backref.c:__resolve_indirect_ref) were not finding
      anything. The reason for this turned out to be that the tree mod logging
      code was not logging some node multi-step operations atomically, therefore
      btrfs_search_old_slot() callers iterated often over an incomplete tree that
      wasn't fully consistent with any tree state from the past. Besides missing
      items, this often (but not always) resulted in -EIO errors during old slot
      searches, reported in dmesg like this:
      
      [ 4299.933936] ------------[ cut here ]------------
      [ 4299.933949] WARNING: CPU: 0 PID: 23190 at fs/btrfs/ctree.c:1343 btrfs_search_old_slot+0x57b/0xab0 [btrfs]()
      [ 4299.933950] Modules linked in: btrfs raid6_pq xor pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) bnep rfcomm bluetooth parport_pc ppdev binfmt_misc joydev snd_hda_codec_h
      [ 4299.933977] CPU: 0 PID: 23190 Comm: btrfs Tainted: G        W  O 3.12.0-fdm-btrfs-next-16+ #70
      [ 4299.933978] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./Z77 Pro4, BIOS P1.50 09/04/2012
      [ 4299.933979]  000000000000053f ffff8806f3fd98f8 ffffffff8176d284 0000000000000007
      [ 4299.933982]  0000000000000000 ffff8806f3fd9938 ffffffff8104a81c ffff880659c64b70
      [ 4299.933984]  ffff880659c643d0 ffff8806599233d8 ffff880701e2e938 0000160000000000
      [ 4299.933987] Call Trace:
      [ 4299.933991]  [<ffffffff8176d284>] dump_stack+0x55/0x76
      [ 4299.933994]  [<ffffffff8104a81c>] warn_slowpath_common+0x8c/0xc0
      [ 4299.933997]  [<ffffffff8104a86a>] warn_slowpath_null+0x1a/0x20
      [ 4299.934003]  [<ffffffffa065d3bb>] btrfs_search_old_slot+0x57b/0xab0 [btrfs]
      [ 4299.934005]  [<ffffffff81775f3b>] ? _raw_read_unlock+0x2b/0x50
      [ 4299.934010]  [<ffffffffa0655001>] ? __tree_mod_log_search+0x81/0xc0 [btrfs]
      [ 4299.934019]  [<ffffffffa06dd9b0>] __resolve_indirect_refs+0x130/0x5f0 [btrfs]
      [ 4299.934027]  [<ffffffffa06a21f1>] ? free_extent_buffer+0x61/0xc0 [btrfs]
      [ 4299.934034]  [<ffffffffa06de39c>] find_parent_nodes+0x1fc/0xe40 [btrfs]
      [ 4299.934042]  [<ffffffffa06b13e0>] ? defrag_lookup_extent+0xe0/0xe0 [btrfs]
      [ 4299.934048]  [<ffffffffa06b13e0>] ? defrag_lookup_extent+0xe0/0xe0 [btrfs]
      [ 4299.934056]  [<ffffffffa06df980>] iterate_extent_inodes+0xe0/0x250 [btrfs]
      [ 4299.934058]  [<ffffffff817762db>] ? _raw_spin_unlock+0x2b/0x50
      [ 4299.934065]  [<ffffffffa06dfb82>] iterate_inodes_from_logical+0x92/0xb0 [btrfs]
      [ 4299.934071]  [<ffffffffa06b13e0>] ? defrag_lookup_extent+0xe0/0xe0 [btrfs]
      [ 4299.934078]  [<ffffffffa06b7015>] btrfs_ioctl+0xf65/0x1f60 [btrfs]
      [ 4299.934080]  [<ffffffff811658b8>] ? handle_mm_fault+0x278/0xb00
      [ 4299.934083]  [<ffffffff81075563>] ? up_read+0x23/0x40
      [ 4299.934085]  [<ffffffff8177a41c>] ? __do_page_fault+0x20c/0x5a0
      [ 4299.934088]  [<ffffffff811b2946>] do_vfs_ioctl+0x96/0x570
      [ 4299.934090]  [<ffffffff81776e23>] ? error_sti+0x5/0x6
      [ 4299.934093]  [<ffffffff810b71e8>] ? trace_hardirqs_off_caller+0x28/0xd0
      [ 4299.934096]  [<ffffffff81776a09>] ? retint_swapgs+0xe/0x13
      [ 4299.934098]  [<ffffffff811b2eb1>] SyS_ioctl+0x91/0xb0
      [ 4299.934100]  [<ffffffff813eecde>] ? trace_hardirqs_on_thunk+0x3a/0x3f
      [ 4299.934102]  [<ffffffff8177ef12>] system_call_fastpath+0x16/0x1b
      [ 4299.934102]  [<ffffffff8177ef12>] system_call_fastpath+0x16/0x1b
      [ 4299.934104] ---[ end trace 48f0cfc902491414 ]---
      [ 4299.934378] btrfs bad fsid on block 0
      
      These tree mod log operations that must be performed atomically, tree_mod_log_free_eb,
      tree_mod_log_eb_copy, tree_mod_log_insert_root and tree_mod_log_insert_move, used to
      be performed atomically before the following commit:
      
        c8cc6341
        (Btrfs: stop using GFP_ATOMIC for the tree mod log allocations)
      
      That change removed the atomicity of such operations. This patch restores the
      atomicity while still not doing the GFP_ATOMIC allocations of tree_mod_elem
      structures, so it has to do the allocations using GFP_NOFS before acquiring
      the mod log lock.
      
      This issue has been experienced by several users recently, such as for example:
      
        http://www.spinics.net/lists/linux-btrfs/msg28574.html
      
      After running the btrfs/004 test for 679 consecutive iterations with this
      patch applied, I didn't ran into the issue anymore.
      
      Cc: stable@vger.kernel.org
      Signed-off-by: default avatarFilipe David Borba Manana <fdmanana@gmail.com>
      Signed-off-by: default avatarJosef Bacik <jbacik@fb.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      5de865ee
    • David Sterba's avatar
      btrfs: check balance of send_in_progress · 66ef7d65
      David Sterba authored
      Warn if the balance goes below zero, which appears to be unlikely
      though. Otherwise cleans up the code a bit.
      Signed-off-by: default avatarDavid Sterba <dsterba@suse.cz>
      Signed-off-by: default avatarJosef Bacik <jbacik@fb.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      66ef7d65
    • Wang Shilong's avatar
      Btrfs: remove transaction from btrfs send · 41ce9970
      Wang Shilong authored
      Since daivd did the work that force us to use readonly snapshot,
      we can safely remove transaction protection from btrfs send.
      Signed-off-by: default avatarWang Shilong <wangsl.fnst@cn.fujitsu.com>
      Signed-off-by: default avatarJosef Bacik <jbacik@fb.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      41ce9970
    • Miao Xie's avatar
      Btrfs: fix double initialization of the raid kobject · 536cd964
      Miao Xie authored
      We met the following oops when doing space balance:
       kobject (ffff88081b590278): tried to init an initialized object, something is seriously wrong.
       ...
       Call Trace:
        [<ffffffff81937262>] dump_stack+0x49/0x5f
        [<ffffffff8137d259>] kobject_init+0x89/0xa0
        [<ffffffff8137d36a>] kobject_init_and_add+0x2a/0x70
        [<ffffffffa009bd79>] ? clear_extent_bit+0x199/0x470 [btrfs]
        [<ffffffffa005e82c>] __link_block_group+0xfc/0x120 [btrfs]
        [<ffffffffa006b9db>] btrfs_make_block_group+0x24b/0x370 [btrfs]
        [<ffffffffa00a899b>] __btrfs_alloc_chunk+0x54b/0x7e0 [btrfs]
        [<ffffffffa00a8c6f>] btrfs_alloc_chunk+0x3f/0x50 [btrfs]
        [<ffffffffa0060123>] do_chunk_alloc+0x363/0x440 [btrfs]
        [<ffffffffa00633d4>] btrfs_check_data_free_space+0x104/0x310 [btrfs]
        [<ffffffffa0069f4d>] btrfs_write_dirty_block_groups+0x48d/0x600 [btrfs]
        [<ffffffffa007aad4>] commit_cowonly_roots+0x184/0x250 [btrfs]
        ...
      
      Steps to reproduce:
       # mkfs.btrfs -f <dev>
       # mount -o nospace_cache <dev> <mnt>
       # btrfs balance start <mnt>
       # dd if=/dev/zero of=<mnt>/tmpfile bs=1M count=1
      
      The reason of this problem is that we initialized the raid kobject when we added
      a block group into a empty raid list. As we know, when we mounted a btrfs filesystem,
      the raid list was empty, we would initialize the raid kobject when we added the first
      block group. But if there was not data stored in the block group, the block group
      would be freed when doing balance, and the raid list would be empty. And then if we
      allocated a new block group and added it into the raid list, we would initialize
      the raid kobject again, the oops happened.
      
      Fix this problem by initializing the raid kobject just when mounting the fs.
      Signed-off-by: default avatarMiao Xie <miaox@cn.fujitsu.com>
      Reported-by: default avatarWang Shilong <wangsl.fnst@cn.fujitsu.com>
      Signed-off-by: default avatarJosef Bacik <jbacik@fb.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      536cd964
    • Wang Shilong's avatar
      Btrfs: fix a warning when iput a file · 180589ef
      Wang Shilong authored
      See the warning below:
      
      [ 1209.102076]  [<ffffffffa04721b9>] remove_extent_mapping+0x69/0x70 [btrfs]
      [ 1209.102084]  [<ffffffffa0466b06>] btrfs_evict_inode+0x96/0x4d0 [btrfs]
      [ 1209.102089]  [<ffffffff81073010>] ? wake_atomic_t_function+0x40/0x40
      [ 1209.102092]  [<ffffffff8118ab2e>] evict+0x9e/0x190
      [ 1209.102094]  [<ffffffff8118b313>] iput+0xf3/0x180
      [ 1209.102101]  [<ffffffffa0461fd1>] btrfs_run_delayed_iputs+0xb1/0xd0 [btrfs]
      [ 1209.102107]  [<ffffffffa045d358>] __btrfs_end_transaction+0x268/0x350 [btrfs]
      
      clear extent bit here to avoid triggering WARN_ON() in remove_extent_mapping()
      Signed-off-by: default avatarWang Shilong <wangsl.fnst@cn.fujitsu.com>
      Signed-off-by: default avatarJosef Bacik <jbacik@fb.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      180589ef
    • David Sterba's avatar
      btrfs: Check read-only status of roots during send · 2c686537
      David Sterba authored
      All the subvolues that are involved in send must be read-only during the
      whole operation. The ioctl SUBVOL_SETFLAGS could be used to change the
      status to read-write and the result of send stream is undefined if the
      data change unexpectedly.
      
      Fix that by adding a refcount for all involved roots and verify that
      there's no send in progress during SUBVOL_SETFLAGS ioctl call that does
      read-only -> read-write transition.
      
      We need refcounts because there are no restrictions on number of send
      parallel operations currently run on a single subvolume, be it source,
      parent or one of the multiple clone sources.
      
      Kernel is silent when the RO checks fail and returns EPERM. The same set
      of checks is done already in userspace before send starts.
      Signed-off-by: default avatarDavid Sterba <dsterba@suse.cz>
      Signed-off-by: default avatarJosef Bacik <jbacik@fb.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      2c686537
    • David Sterba's avatar
      btrfs: remove unused mnt from send_ctx · a8d89f5b
      David Sterba authored
      Unused since ed259095
      "Btrfs: stop using vfs_read in send".
      Signed-off-by: default avatarDavid Sterba <dsterba@suse.cz>
      Signed-off-by: default avatarJosef Bacik <jbacik@fb.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      a8d89f5b
    • David Sterba's avatar
      btrfs: send: clean up dead code · 95bc79d5
      David Sterba authored
      Remove ifdefed code:
      
      - tlv_put for 8, 16 and 32, add a generic tempalte if needed in future
      - tlv_put_timespec - the btrfs_timespec fields are used
      - fs_path_remove obsoleted long ago
      Signed-off-by: default avatarDavid Sterba <dsterba@suse.cz>
      Signed-off-by: default avatarJosef Bacik <jbacik@fb.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      95bc79d5
    • Filipe David Borba Manana's avatar
      Btrfs: fix deadlock when iterating inode refs and running delayed inodes · 3fe81ce2
      Filipe David Borba Manana authored
      While running btrfs/004 from xfstests, after 503 iterations, dmesg reported
      a deadlock between tasks iterating inode refs and tasks running delayed inodes
      (during a transaction commit).
      
      It turns out that iterating inode refs implies doing one tree search and
      release all nodes in the path except the leaf node, and then passing that
      leaf node to btrfs_ref_to_path(), which in turn does another tree search
      without releasing the lock on the leaf node it received as parameter.
      
      This is a problem when other task wants to write to the btree as well and
      ends up updating the leaf that is read locked - the writer task locks the
      parent of the leaf and then blocks waiting for the leaf's lock to be
      released - at the same time, the task executing btrfs_ref_to_path()
      does a second tree search, without releasing the lock on the first leaf,
      and wants to access a leaf (the same or another one) that is a child of
      the same parent, resulting in a deadlock.
      
      The trace reported by lockdep follows.
      
      [84314.936373] INFO: task fsstress:11930 blocked for more than 120 seconds.
      [84314.936381]       Tainted: G        W  O 3.12.0-fdm-btrfs-next-16+ #70
      [84314.936383] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
      [84314.936386] fsstress        D ffff8806e1bf8000     0 11930  11926 0x00000000
      [84314.936393]  ffff8804d6d89b78 0000000000000046 ffff8804d6d89b18 ffffffff810bd8bd
      [84314.936399]  ffff8806e1bf8000 ffff8804d6d89fd8 ffff8804d6d89fd8 ffff8804d6d89fd8
      [84314.936405]  ffff880806308000 ffff8806e1bf8000 ffff8804d6d89c08 ffff8804deb8f190
      [84314.936410] Call Trace:
      [84314.936421]  [<ffffffff810bd8bd>] ? trace_hardirqs_on+0xd/0x10
      [84314.936428]  [<ffffffff81774269>] schedule+0x29/0x70
      [84314.936451]  [<ffffffffa0715bf5>] btrfs_tree_lock+0x75/0x270 [btrfs]
      [84314.936457]  [<ffffffff810715c0>] ? __init_waitqueue_head+0x60/0x60
      [84314.936470]  [<ffffffffa06ba231>] btrfs_search_slot+0x7f1/0x930 [btrfs]
      [84314.936489]  [<ffffffffa0731c2a>] ? __btrfs_run_delayed_items+0x13a/0x1e0 [btrfs]
      [84314.936504]  [<ffffffffa06d2e1f>] btrfs_lookup_inode+0x2f/0xa0 [btrfs]
      [84314.936510]  [<ffffffff810bd6ef>] ? trace_hardirqs_on_caller+0x1f/0x1e0
      [84314.936528]  [<ffffffffa073173c>] __btrfs_update_delayed_inode+0x4c/0x1d0 [btrfs]
      [84314.936543]  [<ffffffffa0731c2a>] ? __btrfs_run_delayed_items+0x13a/0x1e0 [btrfs]
      [84314.936558]  [<ffffffffa0731c2a>] ? __btrfs_run_delayed_items+0x13a/0x1e0 [btrfs]
      [84314.936573]  [<ffffffffa0731c82>] __btrfs_run_delayed_items+0x192/0x1e0 [btrfs]
      [84314.936589]  [<ffffffffa0731d03>] btrfs_run_delayed_items+0x13/0x20 [btrfs]
      [84314.936604]  [<ffffffffa06dbcd4>] btrfs_flush_all_pending_stuffs+0x24/0x80 [btrfs]
      [84314.936620]  [<ffffffffa06ddc13>] btrfs_commit_transaction+0x223/0xa20 [btrfs]
      [84314.936630]  [<ffffffffa06ae5ae>] btrfs_sync_fs+0x6e/0x110 [btrfs]
      [84314.936635]  [<ffffffff811d0b50>] ? __sync_filesystem+0x60/0x60
      [84314.936639]  [<ffffffff811d0b50>] ? __sync_filesystem+0x60/0x60
      [84314.936643]  [<ffffffff811d0b70>] sync_fs_one_sb+0x20/0x30
      [84314.936648]  [<ffffffff811a3541>] iterate_supers+0xf1/0x100
      [84314.936652]  [<ffffffff811d0c45>] sys_sync+0x55/0x90
      [84314.936658]  [<ffffffff8177ef12>] system_call_fastpath+0x16/0x1b
      [84314.936660] INFO: lockdep is turned off.
      [84314.936663] INFO: task btrfs:11955 blocked for more than 120 seconds.
      [84314.936666]       Tainted: G        W  O 3.12.0-fdm-btrfs-next-16+ #70
      [84314.936668] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
      [84314.936670] btrfs           D ffff880541729a88     0 11955  11608 0x00000000
      [84314.936674]  ffff880541729a38 0000000000000046 ffff8805417299d8 ffffffff810bd8bd
      [84314.936680]  ffff88075430c8a0 ffff880541729fd8 ffff880541729fd8 ffff880541729fd8
      [84314.936685]  ffffffff81c104e0 ffff88075430c8a0 ffff8804de8b00b8 ffff8804de8b0000
      [84314.936690] Call Trace:
      [84314.936695]  [<ffffffff810bd8bd>] ? trace_hardirqs_on+0xd/0x10
      [84314.936700]  [<ffffffff81774269>] schedule+0x29/0x70
      [84314.936717]  [<ffffffffa0715815>] btrfs_tree_read_lock+0xd5/0x140 [btrfs]
      [84314.936721]  [<ffffffff810715c0>] ? __init_waitqueue_head+0x60/0x60
      [84314.936733]  [<ffffffffa06ba201>] btrfs_search_slot+0x7c1/0x930 [btrfs]
      [84314.936746]  [<ffffffffa06bd505>] btrfs_find_item+0x55/0x160 [btrfs]
      [84314.936763]  [<ffffffffa06ff689>] ? free_extent_buffer+0x49/0xc0 [btrfs]
      [84314.936780]  [<ffffffffa073c9ca>] btrfs_ref_to_path+0xba/0x1e0 [btrfs]
      [84314.936797]  [<ffffffffa06f9719>] ? release_extent_buffer+0xb9/0xe0 [btrfs]
      [84314.936813]  [<ffffffffa06ff689>] ? free_extent_buffer+0x49/0xc0 [btrfs]
      [84314.936830]  [<ffffffffa073cb50>] inode_to_path+0x60/0xd0 [btrfs]
      [84314.936846]  [<ffffffffa073d365>] paths_from_inode+0x115/0x3c0 [btrfs]
      [84314.936851]  [<ffffffff8118dd44>] ? kmem_cache_alloc_trace+0x114/0x200
      [84314.936868]  [<ffffffffa0714494>] btrfs_ioctl+0xf14/0x2030 [btrfs]
      [84314.936873]  [<ffffffff817762db>] ? _raw_spin_unlock+0x2b/0x50
      [84314.936877]  [<ffffffff8116598f>] ? handle_mm_fault+0x34f/0xb00
      [84314.936882]  [<ffffffff81075563>] ? up_read+0x23/0x40
      [84314.936886]  [<ffffffff8177a41c>] ? __do_page_fault+0x20c/0x5a0
      [84314.936892]  [<ffffffff811b2946>] do_vfs_ioctl+0x96/0x570
      [84314.936896]  [<ffffffff81776e23>] ? error_sti+0x5/0x6
      [84314.936901]  [<ffffffff810b71e8>] ? trace_hardirqs_off_caller+0x28/0xd0
      [84314.936906]  [<ffffffff81776a09>] ? retint_swapgs+0xe/0x13
      [84314.936910]  [<ffffffff811b2eb1>] SyS_ioctl+0x91/0xb0
      [84314.936915]  [<ffffffff813eecde>] ? trace_hardirqs_on_thunk+0x3a/0x3f
      [84314.936920]  [<ffffffff8177ef12>] system_call_fastpath+0x16/0x1b
      [84314.936922] INFO: lockdep is turned off.
      [84434.866873] INFO: task btrfs-transacti:11921 blocked for more than 120 seconds.
      [84434.866881]       Tainted: G        W  O 3.12.0-fdm-btrfs-next-16+ #70
      [84434.866883] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
      [84434.866886] btrfs-transacti D ffff880755b6a478     0 11921      2 0x00000000
      [84434.866893]  ffff8800735b9ce8 0000000000000046 ffff8800735b9c88 ffffffff810bd8bd
      [84434.866899]  ffff8805a1b848a0 ffff8800735b9fd8 ffff8800735b9fd8 ffff8800735b9fd8
      [84434.866904]  ffffffff81c104e0 ffff8805a1b848a0 ffff880755b6a478 ffff8804cece78f0
      [84434.866910] Call Trace:
      [84434.866920]  [<ffffffff810bd8bd>] ? trace_hardirqs_on+0xd/0x10
      [84434.866927]  [<ffffffff81774269>] schedule+0x29/0x70
      [84434.866948]  [<ffffffffa06dd2ef>] wait_current_trans.isra.33+0xbf/0x120 [btrfs]
      [84434.866954]  [<ffffffff810715c0>] ? __init_waitqueue_head+0x60/0x60
      [84434.866970]  [<ffffffffa06dec18>] start_transaction+0x388/0x5a0 [btrfs]
      [84434.866985]  [<ffffffffa06db9b5>] ? transaction_kthread+0xb5/0x280 [btrfs]
      [84434.866999]  [<ffffffffa06dee97>] btrfs_attach_transaction+0x17/0x20 [btrfs]
      [84434.867012]  [<ffffffffa06dba9e>] transaction_kthread+0x19e/0x280 [btrfs]
      [84434.867026]  [<ffffffffa06db900>] ? open_ctree+0x2260/0x2260 [btrfs]
      [84434.867030]  [<ffffffff81070dad>] kthread+0xed/0x100
      [84434.867035]  [<ffffffff81070cc0>] ? flush_kthread_worker+0x190/0x190
      [84434.867040]  [<ffffffff8177ee6c>] ret_from_fork+0x7c/0xb0
      [84434.867044]  [<ffffffff81070cc0>] ? flush_kthread_worker+0x190/0x190
      Signed-off-by: default avatarFilipe David Borba Manana <fdmanana@gmail.com>
      Signed-off-by: default avatarJosef Bacik <jbacik@fb.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      3fe81ce2
    • Wang Shilong's avatar
      Btrfs: remove dead comments for read_csums() · 663df053
      Wang Shilong authored
      Chris introduced hleper function  read_csums() and this function
      has been removed, but we forgot to remove its corresponding comments.
      Signed-off-by: default avatarWang Shilong <wangsl.fnst@cn.fujitsu.com>
      Signed-off-by: default avatarJosef Bacik <jbacik@fb.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      663df053
    • Filipe David Borba Manana's avatar
      Btrfs: remove field tree_mod_seq_elem from btrfs_fs_info struct · e223cfcd
      Filipe David Borba Manana authored
      It's not used anywhere, so just drop it.
      Signed-off-by: default avatarFilipe David Borba Manana <fdmanana@gmail.com>
      Signed-off-by: default avatarJosef Bacik <jbacik@fb.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      e223cfcd
    • Filipe David Borba Manana's avatar
      Btrfs: fix use of uninitialized err variable · fc28b62d
      Filipe David Borba Manana authored
      fs/btrfs/file.c: In function ‘prepare_pages.isra.18’:
      fs/btrfs/file.c:1265:6: warning: ‘err’ may be used uninitialized in this function [-Wuninitialized]
      Signed-off-by: default avatarFilipe David Borba Manana <fdmanana@gmail.com>
      Signed-off-by: default avatarJosef Bacik <jbacik@fb.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      fc28b62d
    • Wang Shilong's avatar
      Btrfs: remove unnecessary filemap writting and waiting after block group relocation · 54eb72c0
      Wang Shilong authored
      We have commited transaction before, remove redundant filemap writting and
      waiting here, it can speed up balance relocation process.
      Signed-off-by: default avatarWang Shilong <wangsl.fnst@cn.fujitsu.com>
      Signed-off-by: default avatarJosef Bacik <jbacik@fb.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      54eb72c0
    • Tsutomu Itoh's avatar
      Btrfs: fix error check of btrfs_lookup_dentry() · 5662344b
      Tsutomu Itoh authored
      Clean up btrfs_lookup_dentry() to never return NULL, but PTR_ERR(-ENOENT)
      instead. This keeps the return value convention consistent.
      
      Callers who use btrfs_lookup_dentry() require a trivial update.
      
      create_snapshot() in particular looks like it can also lose a BUG_ON(!inode)
      which is not really needed - there seems less harm in returning ENOENT to
      userspace at that point in the stack than there is to crash the machine.
      Signed-off-by: default avatarTsutomu Itoh <t-itoh@jp.fujitsu.com>
      Signed-off-by: default avatarJosef Bacik <jbacik@fb.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      5662344b
    • Filipe David Borba Manana's avatar
      Btrfs: return immediately if tree log mod is not necessary · 78357766
      Filipe David Borba Manana authored
      In ctree.c:tree_mod_log_set_node_key() we were calling
      __tree_mod_log_insert_key() even when the modification doesn't need
      to be logged. This would allocate a tree_mod_elem structure, fill it
      and pass it to  __tree_mod_log_insert(), which would just acquire
      the tree mod log write lock and then free the tree_mod_elem structure
      and return (that is, a no-op).
      
      Therefore call tree_mod_log_insert() instead of __tree_mod_log_insert()
      which just returns immediately if the modification doesn't need to be
      logged (without allocating the structure, fill it, acquire write lock,
      free structure).
      Signed-off-by: default avatarFilipe David Borba Manana <fdmanana@gmail.com>
      Signed-off-by: default avatarJosef Bacik <jbacik@fb.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      78357766
    • Josef Bacik's avatar
      Btrfs: move the extent buffer radix tree into the fs_info · f28491e0
      Josef Bacik authored
      I need to create a fake tree to test qgroups and I don't want to have to setup a
      fake btree_inode.  The fact is we only use the radix tree for the fs_info, so
      everybody else who allocates an extent_io_tree is just wasting the space anyway.
      This patch moves the radix tree and its lock into btrfs_fs_info so there is less
      stuff I have to fake to do qgroup sanity tests.  Thanks,
      Signed-off-by: default avatarJosef Bacik <jbacik@fb.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      f28491e0
    • Josef Bacik's avatar
      Btrfs: use a bit to track if we're in the radix tree · 34b41ace
      Josef Bacik authored
      For creating a dummy in-memory btree I need to be able to use the radix tree to
      keep track of the buffers like normal extent buffers.  With dummy buffers we
      skip the radix tree step, and we still want to do that for the tree mod log
      dummy buffers but for my test buffers we need to be able to remove them from the
      radix tree like normal.  This will give me a way to do that.  Thanks,
      Signed-off-by: default avatarJosef Bacik <jbacik@fb.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      34b41ace
    • Josef Bacik's avatar
      Btrfs: deal with io_tree->mapping being NULL · a5dee37d
      Josef Bacik authored
      I need to add infrastructure to allocate dummy extent buffers for running sanity
      tests, and to do this I need to not have to worry about having an
      address_mapping for an io_tree, so just fix up the places where we assume that
      all io_tree's have a non-NULL ->mapping.  Thanks,
      Signed-off-by: default avatarJosef Bacik <jbacik@fb.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      a5dee37d
    • Filipe David Borba Manana's avatar
      Btrfs: more efficient push_leaf_right · 2ef1fed2
      Filipe David Borba Manana authored
      Currently when finding the leaf to insert a key into a btree, if the
      leaf doesn't have enough space to store the item we attempt to move
      off some items from our leaf to its right neighbor leaf, and if this
      fails to create enough free space in our leaf, we try to move off more
      items to the left neighbor leaf as well.
      
      When trying to move off items to the right neighbor leaf, if it has
      enough room to store the new key but not not enough room to move off
      at least one item from our target leaf, __push_leaf_right returns 1 and
      we have to attempt to move items to the left neighbor (push_leaf_left
      function) without touching the right neighbor leaf.
      For the case where the right leaf has enough room to store at least 1
      item from our leaf, we end up modifying (and dirtying) both our leaf
      and the right leaf. This is non-optimal for the case where the new key
      is greater than any key in our target leaf because it can be inserted at
      slot 0 of the right neighbor leaf and we don't need to touch our leaf
      at all nor to attempt to move off items to the left neighbor leaf.
      
      Therefore this change just selects the right neighbor leaf as our new
      target leaf if it has enough room for the new key without modifying our
      initial target leaf - we do this only if the new key is higher than any
      key in the initial target leaf.
      
      While running the following test, push_leaf_right was called by split_leaf
      4802 times. Out of those 4802 calls, for 2571 calls (53.5%) we hit this
      special case (right leaf has enough room and new key is higher than any key
      in the initial target leaf).
      
      Test:
      
        sysbench --test=fileio --file-num=512 --file-total-size=5G \
          --file-test-mode=[seqwr|rndwr] --num-threads=512 --file-block-size=8192 \
          --max-requests=100000 --file-io-mode=sync [prepare|run]
      
      Results:
      
      sequential writes
      
      Throughput before this change: 65.71Mb/sec (average of 10 runs)
      Throughput after this change:  66.58Mb/sec (average of 10 runs)
      
      random writes
      
      Throughput before this change: 10.75Mb/sec (average of 10 runs)
      Throughput after this change:  11.56Mb/sec (average of 10 runs)
      Signed-off-by: default avatarFilipe David Borba Manana <fdmanana@gmail.com>
      Reviewed-by: default avatarLiu Bo <bo.li.liu@oracle.com>
      Signed-off-by: default avatarJosef Bacik <jbacik@fb.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      2ef1fed2
    • Wang Shilong's avatar
      Btrfs: wrap repeated code into scrub_blocked_if_needed() · cb7ab021
      Wang Shilong authored
      Just wrap same code into one function scrub_blocked_if_needed().
      
      This make a change that we will move waiting (@workers_pending = 0)
      before we can wake up commiting transaction(atomic_inc(@scrub_paused)),
      we must take carefully to not deadlock here.
      
      Thread 1			Thread 2
      				|->btrfs_commit_transaction()
      					|->set trans type(COMMIT_DOING)
      					|->btrfs_scrub_paused()(blocked)
      |->join_transaction(blocked)
      
      Move btrfs_scrub_paused() before setting trans type which means we can
      still join a transaction when commiting_transaction is blocked.
      Signed-off-by: default avatarWang Shilong <wangsl.fnst@cn.fujitsu.com>
      Suggested-by: default avatarMiao Xie <miaox@cn.fujitsu.com>
      Signed-off-by: default avatarJosef Bacik <jbacik@fb.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      cb7ab021
    • Wang Shilong's avatar
      Btrfs: fix wrong super generation mismatch when scrubbing supers · 3cb0929a
      Wang Shilong authored
      We came a race condition when scrubbing superblocks, the story is:
      
      In commiting transaction, we will update @last_trans_commited after
      writting superblocks, if scrubber start after writting superblocks
      and before updating @last_trans_commited, generation mismatch happens!
      
      We fix this by checking @scrub_pause_req, and we won't start a srubber
      until commiting transaction is finished.(after btrfs_scrub_continue()
      finished.)
      Reported-by: default avatarSebastian Ochmann <ochmann@informatik.uni-bonn.de>
      Signed-off-by: default avatarWang Shilong <wangsl.fnst@cn.fujitsu.com>
      Reviewed-by: default avatarMiao Xie <miaox@cn.fujitsu.com>
      Signed-off-by: default avatarJosef Bacik <jbacik@fb.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      3cb0929a
    • Filipe David Borba Manana's avatar
      Btrfs: fix pass of transid with wrong endianness in send.c · 5a0f4e2c
      Filipe David Borba Manana authored
      fs/btrfs/send.c:2190:9: warning: incorrect type in argument 3 (different base types)
      fs/btrfs/send.c:2190:9:    expected unsigned long long [unsigned] [usertype] value
      fs/btrfs/send.c:2190:9:    got restricted __le64 [usertype] ctransid
      fs/btrfs/send.c:2195:17: warning: incorrect type in argument 3 (different base types)
      fs/btrfs/send.c:2195:17:    expected unsigned long long [unsigned] [usertype] value
      fs/btrfs/send.c:2195:17:    got restricted __le64 [usertype] ctransid
      fs/btrfs/send.c:3716:9: warning: incorrect type in argument 3 (different base types)
      fs/btrfs/send.c:3716:9:    expected unsigned long long [unsigned] [usertype] value
      fs/btrfs/send.c:3716:9:    got restricted __le64 [usertype] ctransid
      Signed-off-by: default avatarFilipe David Borba Manana <fdmanana@gmail.com>
      Signed-off-by: default avatarJosef Bacik <jbacik@fb.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      5a0f4e2c
    • Filipe David Borba Manana's avatar
      Btrfs: fix extent_map block_len after merging · d527afe1
      Filipe David Borba Manana authored
      When merging an extent_map with its right neighbor, increment
      its block_len with the neighbor's block_len.
      Signed-off-by: default avatarFilipe David Borba Manana <fdmanana@gmail.com>
      Signed-off-by: default avatarJosef Bacik <jbacik@fb.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      d527afe1
    • Michal Nazarewicz's avatar
      btrfs: remove dead code · 11850392
      Michal Nazarewicz authored
      [commit 8185554d: fix incorrect inode acl reset] introduced a dead
      code by adding a condition which can never be true to an else
      branch.  The condition can never be true because it is already
      checked by a previous if statement which causes function to return.
      Signed-off-by: default avatarMichal Nazarewicz <mina86@mina86.com>
      Reviewed-By: default avatarFilipe David Borba Manana <fdmanana@gmail.com>
      Signed-off-by: default avatarJosef Bacik <jbacik@fb.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      11850392
    • Filipe David Borba Manana's avatar
      Btrfs: fix max dir item size calculation · 878f2d2c
      Filipe David Borba Manana authored
      We were accounting for sizeof(struct btrfs_item) twice, once
      in the data_size variable and another time in the if statement
      below.
      Signed-off-by: default avatarFilipe David Borba Manana <fdmanana@gmail.com>
      Signed-off-by: default avatarJosef Bacik <jbacik@fb.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      878f2d2c
    • Filipe David Borba Manana's avatar
      Btrfs: more efficient extent state insertions · 12cfbad9
      Filipe David Borba Manana authored
      Currently we do 2 traversals of an inode's extent_io_tree
      before inserting an extent state structure: 1 to see if a
      matching extent state already exists and 1 to do the insertion
      if the fist traversal didn't found such extent state.
      
      This change just combines those tree traversals into a single one.
      While running sysbench tests (random writes) I captured the number
      of elements in extent_io_tree trees for a while (into a procfs file
      backed by a seq_list from seq_file module) and got this histogram:
      
      Count: 9310
      Range: 51.000 - 21386.000; Mean: 11785.243; Median: 18743.500; Stddev: 8923.688
      Percentiles:  90th: 20985.000; 95th: 21155.000; 99th: 21369.000
        51.000 -   93.933:   693 ########
        93.933 -  172.314:   938 ##########
       172.314 -  315.408:   856 #########
       315.408 -  576.646:    95 #
       576.646 - 6415.830:   888 ##########
      6415.830 - 11713.809:  1024 ###########
      11713.809 - 21386.000:  4816 #####################################################
      
      So traversing such trees can take some significant time that can
      easily be avoided.
      
      Ran the following sysbench tests, 5 times each, for sequential and
      random writes, and got the following results:
      
        sysbench --test=fileio --file-num=1 --file-total-size=2G \
          --file-test-mode=seqwr --num-threads=16 --file-block-size=65536 \
          --max-requests=0 --max-time=60 --file-io-mode=sync
      
        sysbench --test=fileio --file-num=1 --file-total-size=2G \
          --file-test-mode=rndwr --num-threads=16 --file-block-size=65536 \
          --max-requests=0 --max-time=60 --file-io-mode=sync
      
      Before this change:
      
      sequential writes: 69.28Mb/sec (average of 5 runs)
      random writes:     4.14Mb/sec  (average of 5 runs)
      
      After this change:
      
      sequential writes: 69.91Mb/sec (average of 5 runs)
      random writes:     5.69Mb/sec  (average of 5 runs)
      Signed-off-by: default avatarFilipe David Borba Manana <fdmanana@gmail.com>
      Signed-off-by: default avatarJosef Bacik <jbacik@fb.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      12cfbad9
    • Filipe David Borba Manana's avatar
      Btrfs: add missing extent state caching calls · c42ac0bc
      Filipe David Borba Manana authored
      When we didn't find a matching extent state, we inserted a new one
      but didn't cache it in the **cached_state parameter, which makes a
      subsequent call do a tree lookup to get it.
      Signed-off-by: default avatarFilipe David Borba Manana <fdmanana@gmail.com>
      Signed-off-by: default avatarJosef Bacik <jbacik@fb.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      c42ac0bc
    • Filipe David Borba Manana's avatar
      Btrfs: faster and more efficient extent map insertion · 32193c14
      Filipe David Borba Manana authored
      Before this change, adding an extent map to the extent map tree of an
      inode required 2 tree nevigations:
      
      1) doing a tree navigation to search for an existing extent map starting
         at the same offset or an extent map that overlaps the extent map we
         want to insert;
      
      2) Another tree navigation to add the extent map to the tree (if the
         former tree search didn't found anything).
      
      This change just merges these 2 steps into a single one.
      While running first few btrfs xfstests I had noticed these trees easily
      had a few hundred elements, and then with the following sysbench test it
      reached over 1100 elements very often.
      
      Test:
      
        sysbench --test=fileio --file-num=32 --file-total-size=10G \
          --file-test-mode=seqwr --num-threads=512 --file-block-size=8192 \
          --max-requests=1000000 --file-io-mode=sync [prepare|run]
      
      (fs created with mkfs.btrfs -l 4096 -f /dev/sdb3 before each sysbench
      prepare phase)
      
      Before this patch:
      
      run 1 - 41.894Mb/sec
      run 2 - 40.527Mb/sec
      run 3 - 40.922Mb/sec
      run 4 - 49.433Mb/sec
      run 5 - 40.959Mb/sec
      
      average - 42.75Mb/sec
      
      After this patch:
      
      run 1 - 48.036Mb/sec
      run 2 - 50.21Mb/sec
      run 3 - 50.929Mb/sec
      run 4 - 46.881Mb/sec
      run 5 - 53.192Mb/sec
      
      average - 49.85Mb/sec
      Signed-off-by: default avatarFilipe David Borba Manana <fdmanana@gmail.com>
      Signed-off-by: default avatarJosef Bacik <jbacik@fb.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      32193c14
    • Filipe David Borba Manana's avatar
    • Filipe David Borba Manana's avatar
      Btrfs: try harder to avoid btree node splits · 5a4267ca
      Filipe David Borba Manana authored
      When attempting to move items from our target leaf to its neighbor
      leaves (right and left), we only need to free data_size - free_space
      bytes from our leaf in order to add the new item (which has size of
      data_size bytes). Therefore attempt to move items to the right and
      left leaves if they have at least data_size - free_space bytes free,
      instead of data_size bytes free.
      
      After 5 runs of the following test, I got a smaller number of btree
      node splits overall:
      
      sysbench --test=fileio --file-num=512 --file-total-size=5G \
        --file-test-mode=seqwr --num-threads=512 \
         --file-block-size=8192 --max-requests=100000 --file-io-mode=sync
      
      Before this change:
      * 6171 splits (average of 5 test runs)
      * 61.508Mb/sec of throughput (average of 5 test runs)
      
      After this change:
      * 6036 splits (average of 5 test runs)
      * 63.533Mb/sec of throughput (average of 5 test runs)
      
      An ideal test would not just have multiple threads/processes writing
      to a file (insertion of file extent items) but also do other operations
      that result in insertion of items with varied sizes, like file/directory
      creations, creation of links, symlinks, xattrs, etc.
      Signed-off-by: default avatarFilipe David Borba Manana <fdmanana@gmail.com>
      Signed-off-by: default avatarJosef Bacik <jbacik@fb.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      5a4267ca
    • Filipe David Borba Manana's avatar
      Btrfs: avoid unnecessary ordered extent cache resets · 1b8e7e45
      Filipe David Borba Manana authored
      After an ordered extent completes, don't blindly reset the
      inode's ordered tree last accessed ordered extent pointer.
      
      While running the xfstests I noticed that about 29% of the
      time the ordered extent to which tree->last pointed was not
      the same as our just completed ordered extent. After that I
      ran the following sysbench test (after a prepare phase) and
      noticed that about 68% of the time tree->last pointed to
      a different ordered extent too.
      
      sysbench --test=fileio --file-num=32 --file-total-size=4G \
          --file-test-mode=rndwr --num-threads=512 \
          --file-block-size=32768 --max-time=60 --max-requests=0 run
      
      Therefore reset tree->last on ordered extent removal only if
      it pointed to the ordered extent we're removing from the tree.
      
      Results from 4 runs of the following test before and after
      applying this patch:
      
      $ sysbench --test=fileio --file-num=32 --file-total-size=4G \
        --file-test-mode=seqwr --num-threads=512 \
        --file-block-size=32768 --max-time=60 --file-io-mode=sync prepare
      $ sysbench --test=fileio --file-num=32 --file-total-size=4G \
        --file-test-mode=seqwr --num-threads=512 \
        --file-block-size=32768 --max-time=60 --file-io-mode=sync run
      
      Before this path:
      
      run 1 - 64.049Mb/sec
      run 2 - 63.455Mb/sec
      run 3 - 64.656Mb/sec
      run 4 - 63.833Mb/sec
      
      After this patch:
      
      run 1 - 66.149Mb/sec
      run 2 - 68.459Mb/sec
      run 3 - 66.338Mb/sec
      run 4 - 66.176Mb/sec
      
      With random writes (--file-test-mode=rndwr) I had huge fluctuations
      on the results (+- 35% easily).
      Signed-off-by: default avatarFilipe David Borba Manana <fdmanana@gmail.com>
      Signed-off-by: default avatarJosef Bacik <jbacik@fb.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      1b8e7e45
    • Jeff Mahoney's avatar
      btrfs: fix leaks during sysfs teardown · e453d989
      Jeff Mahoney authored
      Filipe noticed that we were leaking the features attribute group
      after umount. His fix of just calling sysfs_remove_group() wasn't enough
      since that removes just the supported features and not the unsupported
      features.
      
      This patch changes the unknown feature handling to add them individually
      so we can skip the kmalloc and uses the same iteration to tear them down
      later.
      
      We also fix the error handling during mount so that we catch the
      failing creation of the per-super kobject, and handle proper teardown
      of a half-setup sysfs context.
      
      Tested properly with kmemleak enabled this time.
      Reported-by: default avatarFilipe David Borba Manana <fdmanana@gmail.com>
      Signed-off-by: default avatarJeff Mahoney <jeffm@suse.com>
      Tested-by: default avatarFilipe David Borba Manana <fdmanana@gmail.com>
      Signed-off-by: default avatarJosef Bacik <jbacik@fb.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      e453d989
    • Jeff Mahoney's avatar
      btrfs: fix static checker warnings · 1b8e5df6
      Jeff Mahoney authored
      This patch fixes the following warnings:
      fs/btrfs/extent-tree.c:6201:12: sparse: symbol 'get_raid_name' was not declared. Should it be static?
      fs/btrfs/extent-tree.c:8430:9: error: format not a string literal and no format arguments [-Werror=format-security] get_raid_name(index));
      Signed-off-by: default avatarJeff Mahoney <jeffm@suse.com>
      Reviewed-by: default avatarKees Cook <keescook@chromium.org>
      Signed-off-by: default avatarJosef Bacik <jbacik@fb.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      1b8e5df6