- 15 May, 2020 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fixes from Palmer Dabbelt: "A handful of build fixes, all found by Huawei's autobuilder. None of these patches should have any functional impact on kernels that build, and they're mostly related to various features intermingling with !MMU. While some of these might be better hoisted to generic code, it seems better to have the simple fixes in the meanwhile. As far as I know these are the only outstanding patches for 5.7" * tag 'riscv-for-linus-5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: mmiowb: Fix implicit declaration of function 'smp_processor_id' riscv: pgtable: Fix __kernel_map_pages build error if NOMMU riscv: Make SYS_SUPPORTS_HUGETLBFS depends on MMU riscv: Disable ARCH_HAS_DEBUG_VIRTUAL if NOMMU riscv: Add pgprot_writecombine/device and PAGE_SHARED defination if NOMMU riscv: stacktrace: Fix undefined reference to `walk_stackframe' riscv: Fix unmet direct dependencies built based on SOC_VIRT riscv: perf: RISCV_BASE_PMU should be independent riscv: perf_event: Make some funciton static
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fix from Catalin Marinas: "Fix flush_icache_range() second argument in machine_kexec() to be an address rather than size" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: fix the flush_icache_range arguments in machine_kexec
-
Linus Torvalds authored
Merge tag 'hwmon-for-v5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - Fix ADC access synchronization problem with da9052 driver - Fix temperature limit and status reporting in nct7904 driver - Fix drivetemp temperature reporting if SCT is supported but SCT data tables are not. * tag 'hwmon-for-v5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (da9052) Synchronize access with mfd hwmon: (nct7904) Fix incorrect range of temperature limit registers hwmon: (nct7904) Read all SMI status registers in probe function hwmon: (drivetemp) Fix SCT support if SCT data tables are not supported
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "Things look good and calming down; the only change to ALSA core is the fix for racy rawmidi buffer accesses spotted by syzkaller, and the rest are all small device-specific quirks for HD-audio and USB-audio devices" * tag 'sound-5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/realtek - Limit int mic boost for Thinkpad T530 ALSA: hda/realtek - Add COEF workaround for ASUS ZenBook UX431DA ALSA: hda/realtek: Enable headset mic of ASUS UX581LV with ALC295 ALSA: hda/realtek - Enable headset mic of ASUS UX550GE with ALC295 ALSA: hda/realtek - Enable headset mic of ASUS GL503VM with ALC295 ALSA: hda/realtek: Add quirk for Samsung Notebook ALSA: rawmidi: Fix racy buffer resize under concurrent accesses ALSA: usb-audio: add mapping for ASRock TRX40 Creator ALSA: hda/realtek - Fix S3 pop noise on Dell Wyse Revert "ALSA: hda/realtek: Fix pop noise on ALC225" ALSA: firewire-lib: fix 'function sizeof not defined' error of tracepoints format ALSA: usb-audio: Add control message quirk delay for Kingston HyperX headset
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Dave Airlie: "As mentioned last week an i915 PR came in late, but I left it, so the i915 bits of this cover 2 weeks, which is why it's likely a bit larger than usual. Otherwise it's mostly amdgpu fixes, one tegra fix, one meson fix. i915: - Handle idling during i915_gem_evict_something busy loops (Chris) - Mark current submissions with a weak-dependency (Chris) - Propagate error from completed fences (Chris) - Fixes on execlist to avoid GPU hang situation (Chris) - Fixes couple deadlocks (Chris) - Timeslice preemption fixes (Chris) - Fix Display Port interrupt handling on Tiger Lake (Imre) - Reduce debug noise around Frame Buffer Compression (Peter) - Fix logic around IPC W/a for Coffee Lake and Kaby Lake (Sultan) - Avoid dereferencing a dead context (Chris) tegra: - tegra120/4 smmu fixes amdgpu: - Clockgating fixes - Fix fbdev with scatter/gather display - S4 fix for navi - Soft recovery for gfx10 - Freesync fixes - Atomic check cursor fix - Add a gfxoff quirk - MST fix amdkfd: - Fix GEM reference counting meson: - error code propogation fix" * tag 'drm-fixes-2020-05-15' of git://anongit.freedesktop.org/drm/drm: (29 commits) drm/i915: Handle idling during i915_gem_evict_something busy loops drm/meson: pm resume add return errno branch drm/amd/amdgpu: Update update_config() logic drm/amd/amdgpu: add raven1 part to the gfxoff quirk list drm/i915: Mark concurrent submissions with a weak-dependency drm/i915: Propagate error from completed fences drm/i915/gvt: Fix kernel oops for 3-level ppgtt guest drm/i915/gvt: Init DPLL/DDI vreg for virtual display instead of inheritance. drm/amd/display: add basic atomic check for cursor plane drm/amd/display: Fix vblank and pageflip event handling for FreeSync drm/amdgpu: implement soft_recovery for gfx10 drm/amdgpu: enable hibernate support on Navi1X drm/amdgpu: Use GEM obj reference for KFD BOs drm/amdgpu: force fbdev into vram drm/amd/powerplay: perform PG ungate prior to CG ungate drm/amdgpu: drop unnecessary cancel_delayed_work_sync on PG ungate drm/amdgpu: disable MGCG/MGLS also on gfx CG ungate drm/i915/execlists: Track inflight CCID drm/i915/execlists: Avoid reusing the same logical CCID drm/i915/gem: Remove object_is_locked assertion from unpin_from_display_plane ...
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
Just one meson patch this time to propagate an error code Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20200514073538.wvdtv5s2mt4wdrdj@gilmour.lan
-
Dave Airlie authored
Merge tag 'drm-intel-fixes-2020-05-13-1' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Handle idling during i915_gem_evict_something busy loops (Chris) - Mark current submissions with a weak-dependency (Chris) - Propagate errror from completed fences (Chris) - Fixes on execlist to avoid GPU hang situation (Chris) - Fixes couple deadlocks (Chris) - Timeslice preemption fixes (Chris) - Fix Display Port interrupt handling on Tiger Lake (Imre) - Reduce debug noise around Frame Buffer Compression +(Peter) - Fix logic around IPC W/a for Coffee Lake and Kaby Lake +(Sultan) - Avoid dereferencing a dead context (Chris) Signed-off-by:
-
- 14 May, 2020 20 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds authored
Pull MMC fixes from Ulf Hansson: "MMC core: - Fix a couple of quite severe issues for the CQE request path MMC host: - alcor: Fix a resource leak in the error path for ->probe() - sdhci-acpi: Fix the DMA support for the AMD eMMC v5.0 variant - sdhci-pci-gli: Fix system resume support for GL975x - sdhci-pci-gli: Fix reboot error for GL9750" * tag 'mmc-v5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci-acpi: Add SDHCI_QUIRK2_BROKEN_64_BIT_DMA for AMDI0040 mmc: block: Fix request completion in the CQE timeout path mmc: core: Fix recursive locking issue in CQE recovery path mmc: core: Check request type before completing the request mmc: sdhci-pci-gli: Fix can not access GL9750 after reboot from Windows 10 mmc: alcor: Fix a resource leak in the error path for ->probe() mmc: sdhci-pci-gli: Fix no irq handler from suspend
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "7 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: kasan: add missing functions declarations to kasan.h kasan: consistently disable debugging features ipc/util.c: sysvipc_find_ipc() incorrectly updates position index userfaultfd: fix remap event with MREMAP_DONTUNMAP mm/gup: fix fixup_user_fault() on multiple retries epoll: call final ep_events_available() check under the lock mm, memcg: fix inconsistent oom event behavior
-
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linuxLinus Torvalds authored
Pull thread fix from Christian Brauner: "This contains a single fix for all exported legacy fork helpers to block accidental access to clone3() features in the upper 32 bits of their respective flags arguments. I got Cced on a glibc issue where someone reported consistent failures for the legacy clone() syscall on ppc64le when sign extension was performed (since the clone() syscall in glibc exposes the flags argument as an int whereas the kernel uses unsigned long). The legacy clone() syscall is odd in a bunch of ways and here two things interact: - First, legacy clone's flag argument is word-size dependent, i.e. it's an unsigned long whereas most system calls with flag arguments use int or unsigned int. - Second, legacy clone() ignores unknown and deprecated flags. The two of them taken together means that users on 64bit systems can pass garbage for the upper 32bit of the clone() syscall since forever and things would just work fine. The following program compiled on a 64bit kernel prior to v5.7-rc1 will succeed and will fail post v5.7-rc1 with EBADF: int main(int argc, char *argv[]) { pid_t pid; /* Note that legacy clone() has different argument ordering on * different architectures so this won't work everywhere. * * Only set the upper 32 bits. */ pid = syscall(__NR_clone, 0xffffffff00000000 | SIGCHLD, NULL, NULL, NULL, NULL); if (pid < 0) exit(EXIT_FAILURE); if (pid == 0) exit(EXIT_SUCCESS); if (wait(NULL) != pid) exit(EXIT_FAILURE); exit(EXIT_SUCCESS); } Since legacy clone() couldn't be extended this was not a problem so far and nobody really noticed or cared since nothing in the kernel ever bothered to look at the upper 32 bits. But once we introduced clone3() and expanded the flag argument in struct clone_args to 64 bit we opened this can of worms. With the first flag-based extension to clone3() making use of the upper 32 bits of the flag argument we've effectively made it possible for the legacy clone() syscall to reach clone3() only flags on accident. The sign extension scenario is just the odd corner-case that we needed to figure this out. The reason we just realized this now and not already when we introduced CLONE_CLEAR_SIGHAND was that CLONE_INTO_CGROUP assumes that a valid cgroup file descriptor has been given - whereas CLONE_CLEAR_SIGHAND doesn't need to verify anything. It just silently resets the signal handlers to SIG_DFL. So the sign extension (or the user accidently passing garbage for the upper 32 bits) caused the CLONE_INTO_CGROUP bit to be raised and the kernel to error out when it didn't find a valid cgroup file descriptor. Note, I'm also capping kernel_thread()'s flag argument mainly because none of the new features make sense for kernel_thread() and we shouldn't risk them being accidently activated however unlikely. If we wanted to, we could even make kernel_thread() yell when an unknown flag has been set which it doesn't do right now. But it's not worth risking this in a bugfix imho" * tag 'for-linus-2020-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: fork: prevent accidental access to clone3 features -
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull more tracing fixes from Steven Rostedt: "Various tracing fixes: - Fix a crash when having function tracing and function stack tracing on the command line. The ftrace trampolines are created as executable and read only. But the stack tracer tries to modify them with text_poke() which expects all kernel text to still be writable at boot. Keep the trampolines writable at boot, and convert them to read-only with the rest of the kernel. - A selftest was triggering in the ring buffer iterator code, that is no longer valid with the update of keeping the ring buffer writable while a iterator is reading. Just bail after three failed attempts to get an event and remove the warning and disabling of the ring buffer. - While modifying the ring buffer code, decided to remove all the unnecessary BUG() calls" * tag 'trace-v5.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ring-buffer: Remove all BUG() calls ring-buffer: Don't deactivate the ring buffer on failed iterator reads x86/ftrace: Have ftrace trampolines turn read-only at the end of system boot up -
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management fix from Rafael Wysocki: "Prevent the suspend-to-idle internal loop from busy spinning after a spurious ACPI SCI wakeup in some cases" * tag 'pm-5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: EC: PM: Avoid premature returns from acpi_s2idle_wake()
-
Andrey Konovalov authored
KASAN is currently missing declarations for __asan_report* and __hwasan* functions. This can lead to compiler warnings. Reported-by:
Leon Romanovsky <leon@kernel.org> Reported-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Tested-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Andrey Konovalov authored
KASAN is incompatible with some kernel debugging/tracing features. There's been multiple patches that disable those feature for some of KASAN files one by one. Instead of prolonging that, disable these features for all KASAN files at once. Reported-by:
-
Vasily Averin authored
Commit 89163f93 ("ipc/util.c: sysvipc_find_ipc() should increase position index") is causing this bug (seen on 5.6.8): # ipcs -q ------ Message Queues -------- key msqid owner perms used-bytes messages # ipcmk -Q Message queue id: 0 # ipcs -q ------ Message Queues -------- key msqid owner perms used-bytes messages 0x82db8127 0 root 644 0 0 # ipcmk -Q Message queue id: 1 # ipcs -q ------ Message Queues -------- key msqid owner perms used-bytes messages 0x82db8127 0 root 644 0 0 0x76d1fb2a 1 root 644 0 0 # ipcrm -q 0 # ipcs -q ------ Message Queues -------- key msqid owner perms used-bytes messages 0x76d1fb2a 1 root 644 0 0 0x76d1fb2a 1 root 644 0 0 # ipcmk -Q Message queue id: 2 # ipcrm -q 2 # ipcs -q ------ Message Queues -------- key msqid owner perms used-bytes messages 0x76d1fb2a 1 root 644 0 0 0x76d1fb2a 1 root 644 0 0 # ipcmk -Q Message queue id: 3 # ipcrm -q 1 # ipcs -q ------ Message Queues -------- key msqid owner perms used-bytes messages 0x7c982867 3 root 644 0 0 0x7c982867 3 root 644 0 0 0x7c982867 3 root 644 0 0 0x7c982867 3 root 644 0 0 Whenever an IPC item with a low id is deleted, the items with higher ids are duplicated, as if filling a hole. new_pos should jump through hole of unused ids, pos can be updated inside "for" cycle. Fixes: 89163f93 ("ipc/util.c: sysvipc_find_ipc() should increase position index") Reported-by:
Andreas Schwab <schwab@suse.de> Reported-by:
Vasily Averin <vvs@virtuozzo.com> Signed-off-by:
Waiman Long <longman@redhat.com> Cc: NeilBrown <neilb@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Oberparleiter <oberpar@linux.ibm.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/4921fe9b-9385-a2b4-1dc4-1099be6d2e39@virtuozzo.comSigned-off-by:
-
Brian Geffon authored
A user is not required to set a new address when using MREMAP_DONTUNMAP as it can be used without MREMAP_FIXED. When doing so the remap event will use new_addr which may not have been set and we didn't propagate it back other then in the return value of remap_to. Because ret is always the new address it's probably more correct to use it rather than new_addr on the remap_event_complete call, and it resolves this bug. Fixes: e346b381 ("mm/mremap: add MREMAP_DONTUNMAP to mremap()") Reported-by:
Brian Geffon <bgeffon@google.com> Signed-off-by:
-
Peter Xu authored
This part was overlooked when reworking the gup code on multiple retries. When we get the 2nd+ retry, we'll be with TRIED flag set. Current code will bail out on the 2nd retry because the !TRIED check will fail so the retry logic will be skipped. What's worse is that, it will also return zero which errornously hints the caller that the page is faulted in while it's not. The !TRIED flag check seems to not be needed even before the mutliple retries change because if we get a VM_FAULT_RETRY, it must be the 1st retry, and we should not have TRIED set for that. Fix it by removing the !TRIED check, at the meantime check against fatal signals properly before the page fault so we can still properly respond to the user killing the process during retries. Fixes: 4426e945 ("mm/gup: allow VM_FAULT_RETRY for multiple times") Reported-by:
Peter Xu <peterx@redhat.com> Signed-off-by:
-
Roman Penyaev authored
There is a possible race when ep_scan_ready_list() leaves ->rdllist and ->obflist empty for a short period of time although some events are pending. It is quite likely that ep_events_available() observes empty lists and goes to sleep. Since commit 339ddb53 ("fs/epoll: remove unnecessary wakeups of nested epoll") we are conservative in wakeups (there is only one place for wakeup and this is ep_poll_callback()), thus ep_events_available() must always observe correct state of two lists. The easiest and correct way is to do the final check under the lock. This does not impact the performance, since lock is taken anyway for adding a wait entry to the wait queue. The discussion of the problem can be found here: https://lore.kernel.org/linux-fsdevel/a2f22c3c-c25a-4bda-8339-a7bdaf17849e@akamai.com/ In this patch barrierless __set_current_state() is used. This is safe since waitqueue_active() is called under the same lock on wakeup side. Short-circuit for fatal signals (i.e. fatal_signal_pending() check) is moved to the line just before actual events harvesting routine. This is fully compliant to what is said in the comment of the patch where the actual fatal_signal_pending() check was added: c257a340 ("fs, epoll: short circuit fetching events if thread has been killed"). Fixes: 339ddb53 ("fs/epoll: remove unnecessary wakeups of nested epoll") Reported-by:
Jason Baron <jbaron@akamai.com> Reported-by:
Roman Penyaev <rpenyaev@suse.de> Signed-off-by:
-
Yafang Shao authored
A recent commit 9852ae3f ("mm, memcg: consider subtrees in memory.events") changed the behavior of memcg events, which will now consider subtrees in memory.events. But oom_kill event is a special one as it is used in both cgroup1 and cgroup2. In cgroup1, it is displayed in memory.oom_control. The file memory.oom_control is in both root memcg and non root memcg, that is different with memory.event as it only in non-root memcg. That commit is okay for cgroup2, but it is not okay for cgroup1 as it will cause inconsistent behavior between root memcg and non-root memcg. Here's an example on why this behavior is inconsistent in cgroup1. root memcg / memcg foo / memcg bar Suppose there's an oom_kill in memcg bar, then the oon_kill will be root memcg : memory.oom_control(oom_kill) 0 / memcg foo : memory.oom_control(oom_kill) 1 / memcg bar : memory.oom_control(oom_kill) 1 For the non-root memcg, its memory.oom_control(oom_kill) includes its descendants' oom_kill, but for root memcg, it doesn't include its descendants' oom_kill. That means, memory.oom_control(oom_kill) has different meanings in different memcgs. That is inconsistent. Then the user has to know whether the memcg is root or not. If we can't fully support it in cgroup1, for example by adding memory.events.local into cgroup1 as well, then let's don't touch its original behavior. Fixes: 9852ae3f ("mm, memcg: consider subtrees in memory.events") Reported-by:
Yafang Shao <laoar.shao@gmail.com> Signed-off-by:
Shakeel Butt <shakeelb@google.com> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
Chris Down <chris@chrisdown.name> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200502141055.7378-1-laoar.shao@gmail.comSigned-off-by:
-
Takashi Iwai authored
Lenovo Thinkpad T530 seems to have a sensitive internal mic capture that needs to limit the mic boost like a few other Thinkpad models. Although we may change the quirk for ALC269_FIXUP_LENOVO_DOCK, this hits way too many other laptop models, so let's add a new fixup model that limits the internal mic boost on top of the existing quirk and apply to only T530. BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1171293 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200514160533.10337-1-tiwai@suse.deSigned-off-by:
Takashi Iwai <tiwai@suse.de>
-
Steven Rostedt (VMware) authored
There's a lot of checks to make sure the ring buffer is working, and if an anomaly is detected, it safely shuts itself down. But there's a few cases that it will call BUG(), which defeats the point of being safe (it crashes the kernel when an anomaly is found!). There's no reason for them. Switch them all to either WARN_ON_ONCE() (when no ring buffer descriptor is present), or to RB_WARN_ON() (when a ring buffer descriptor is present). Signed-off-by:Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Steven Rostedt (VMware) authored
If the function tracer is running and the trace file is read (which uses the ring buffer iterator), the iterator can get in sync with the writes, and caues it to fail to find a page with content it can read three times. This causes a warning and deactivation of the ring buffer code. Looking at the other cases of failure to get an event, it appears that there's a chance that the writer could cause them too. Since the iterator is a "best effort" to read the ring buffer if there's an active writer (the consumer reader is made for this case "see trace_pipe"), if it fails to get an event after three tries, simply give up and return NULL. Don't warn, nor disable the ring buffer on this failure. Link: https://lore.kernel.org/r/20200429090508.GG5770@shao2-debianReported-by:
kernel test robot <lkp@intel.com> Fixes: ff84c50c ("ring-buffer: Do not die if rb_iter_peek() fails more than thrice") Tested-by:
Sven Schnelle <svens@linux.ibm.com> Signed-off-by:
-
Dave Airlie authored
Merge tag 'amd-drm-fixes-5.7-2020-05-13' of git://people.freedesktop.org/~agd5f/linux into drm-fixes amd-drm-fixes-5.7-2020-05-13: amdgpu: - Clockgating fixes - Fix fbdev with scatter/gather display - S4 fix for navi - Soft recovery for gfx10 - Freesync fixes - Atomic check cursor fix - Add a gfxoff quirk - MST fix amdkfd: - Fix GEM reference counting Signed-off-by:
-
git://anongit.freedesktop.org/tegra/linuxDave Airlie authored
drm/tegra: Fixes for v5.7 This contains a pair of patches which fix SMMU support on Tegra124 and Tegra210 for host1x and the Tegra DRM driver. Signed-off-by:
-
Dave Airlie authored
Merge tag 'drm-intel-fixes-2020-05-07' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fixes on execlist to avoid GPU hang situation (Chris) - Fixes couple deadlocks (Chris) - Timeslice preemption fixes (Chris) - Fix Display Port interrupt handling on Tiger Lake (Imre) - Reduce debug noise around Frame Buffer Compression (Peter) - Fix logic around IPC W/a for Coffee Lake and Kaby Lake (Sultan) - Avoid dereferencing a dead context (Chris) Signed-off-by:
-
Kefeng Wang authored
In file included from ./../include/linux/compiler_types.h:68, from <command-line>: ../include/asm-generic/mmiowb.h: In function ‘mmiowb_set_pending’: ../include/asm-generic/percpu.h:34:38: error: implicit declaration of function ‘smp_processor_id’; did you mean ‘raw_smp_processor_id’? [-Werror=implicit-function-declaration] #define my_cpu_offset per_cpu_offset(smp_processor_id()) ^~~~~~~~~~~~~~~~ ../include/linux/compiler-gcc.h:58:26: note: in definition of macro ‘RELOC_HIDE’ (typeof(ptr)) (__ptr + (off)); \ ^~~ ../include/linux/percpu-defs.h:249:2: note: in expansion of macro ‘SHIFT_PERCPU_PTR’ SHIFT_PERCPU_PTR(ptr, my_cpu_offset); \ ^~~~~~~~~~~~~~~~ ../include/asm-generic/percpu.h:34:23: note: in expansion of macro ‘per_cpu_offset’ #define my_cpu_offset per_cpu_offset(smp_processor_id()) ^~~~~~~~~~~~~~ ../include/linux/percpu-defs.h:249:24: note: in expansion of macro ‘my_cpu_offset’ SHIFT_PERCPU_PTR(ptr, my_cpu_offset); \ ^~~~~~~~~~~~~ ../include/asm-generic/mmiowb.h:30:26: note: in expansion of macro ‘this_cpu_ptr’ #define __mmiowb_state() this_cpu_ptr(&__mmiowb_state) ^~~~~~~~~~~~ ../include/asm-generic/mmiowb.h:37:28: note: in expansion of macro ‘__mmiowb_state’ struct mmiowb_state *ms = __mmiowb_state(); ^~~~~~~~~~~~~~ Reported-by:Hulk Robot <hulkci@huawei.com> Signed-off-by:
Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by:
Palmer Dabbelt <palmerdabbelt@google.com>
-
Kefeng Wang authored
riscv64-none-linux-gnu-ld: mm/page_alloc.o: in function `.L0 ': page_alloc.c:(.text+0xd34): undefined reference to `__kernel_map_pages' riscv64-none-linux-gnu-ld: page_alloc.c:(.text+0x104a): undefined reference to `__kernel_map_pages' riscv64-none-linux-gnu-ld: mm/page_alloc.o: in function `__pageblock_pfn_to_page': page_alloc.c:(.text+0x145e): undefined reference to `__kernel_map_pages' Reported-by:
-
- 13 May, 2020 9 commits
-
-
Chris Wilson authored
i915_gem_evict_something() is charged with finding a slot within the GTT that we may reuse. Since our goal is not to stall, we first look for a slot that only overlaps idle vma. To this end, on the first pass we move any active vma to the end of the search list. However, we only stopped moving active vma after we see the first active vma twice. If during the search, that first active vma completed, we would not notice and keep on extending the search list. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1746 Fixes: 2850748e ("drm/i915: Pull i915_vma_pin under the vm->mutex") Fixes: b1e3177b ("drm/i915: Coordinate i915_active with its own mutex") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: <stable@vger.kernel.org> # v5.5+ Reviewed-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200509115217.26853-1-chris@chris-wilson.co.uk (cherry picked from commit 73e28cc4) Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com>
-
Samu Nuutamo authored
When tsi-as-adc is configured it is possible for in7[0123]_input read to return an incorrect value if a concurrent read to in[456]_input is performed. This is caused by a concurrent manipulation of the mux channel without proper locking as hwmon and mfd use different locks for synchronization. Switch hwmon to use the same lock as mfd when accessing the TSI channel. Fixes: 4f16cab1 ("hwmon: da9052: Add support for TSI channel") Signed-off-by:
Samu Nuutamo <samu.nuutamo@vincit.fi> [rebase to current master, reword commit message slightly] Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net>
-
Amy Shih authored
The format of temperature limitation registers are 8-bit 2's complement and the range is -128~127. Converts the reading value to signed char to fix the incorrect range of temperature limitation registers. Signed-off-by:
Amy Shih <amy.shih@advantech.com.tw> Signed-off-by:
-
Amy Shih authored
When nct7904 power up, it compares current sensor readings against the default threshold immediately. This results in false alarms on startup. Read all SMI status registers in probe function to clear the alarms. Signed-off-by:
-
Bernard Zhao authored
pm_resump api did not handle drm_mode_config_helper_resume error. This change add handle to return drm_mode_config_helper_resume`s error number. This code logic is aligned with api pm_suspend. After this change, the code maybe a bit readable. Signed-off-by:
Bernard Zhao <bernard@vivo.com> Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200428131747.2099-1-bernard@vivo.com
-
Kefeng Wang authored
HUGETLBFS only used when MMU enabled, add the dependency. Reported-by:
-
Kefeng Wang authored
DEBUG_VIRTUAL should only used when MMU enabled, add the dependence. Signed-off-by:
-
Kefeng Wang authored
Some drivers use PAGE_SHARED, pgprot_writecombine()/pgprot_device(), add the defination to fix build error if NOMMU. Reported-by:
-
Kefeng Wang authored
Drop static declaration to fix following build error if FRAME_POINTER disabled, riscv64-linux-ld: arch/riscv/kernel/perf_callchain.o: in function `.L0': perf_callchain.c:(.text+0x2b8): undefined reference to `walk_stackframe' Reported-by:
-
- 12 May, 2020 4 commits
-
-
Kefeng Wang authored
Fix unmet direct dependencies Warning and fix Kconfig indent. WARNING: unmet direct dependencies detected for POWER_RESET_SYSCON Depends on [n]: POWER_RESET [=n] && OF [=y] && HAS_IOMEM [=y] Selected by [y]: - SOC_VIRT [=y] WARNING: unmet direct dependencies detected for POWER_RESET_SYSCON_POWEROFF Depends on [n]: POWER_RESET [=n] && OF [=y] && HAS_IOMEM [=y] Selected by [y]: - SOC_VIRT [=y] WARNING: unmet direct dependencies detected for RTC_DRV_GOLDFISH Depends on [n]: RTC_CLASS [=n] && OF [=y] && HAS_IOMEM [=y] && (GOLDFISH [=y] || COMPILE_TEST [=n]) Selected by [y]: - SOC_VIRT [=y] Reported-by:
-
Kefeng Wang authored
Selecting PERF_EVENTS without selecting RISCV_BASE_PMU results in a build error. Signed-off-by:
-
Steven Rostedt (VMware) authored
Booting one of my machines, it triggered the following crash: Kernel/User page tables isolation: enabled ftrace: allocating 36577 entries in 143 pages Starting tracer 'function' BUG: unable to handle page fault for address: ffffffffa000005c #PF: supervisor write access in kernel mode #PF: error_code(0x0003) - permissions violation PGD 2014067 P4D 2014067 PUD 2015063 PMD 7b253067 PTE 7b252061 Oops: 0003 [#1] PREEMPT SMP PTI CPU: 0 PID: 0 Comm: swapper Not tainted 5.4.0-test+ #24 Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS SDBLI944.86P 05/08/2007 RIP: 0010:text_poke_early+0x4a/0x58 Code: 34 24 48 89 54 24 08 e8 bf 72 0b 00 48 8b 34 24 48 8b 4c 24 08 84 c0 74 0b 48 89 df f3 a4 48 83 c4 10 5b c3 9c 58 fa 48 89 df <f3> a4 50 9d 48 83 c4 10 5b e9 d6 f9 ff ff 0 41 57 49 RSP: 0000:ffffffff82003d38 EFLAGS: 00010046 RAX: 0000000000000046 RBX: ffffffffa000005c RCX: 0000000000000005 RDX: 0000000000000005 RSI: ffffffff825b9a90 RDI: ffffffffa000005c RBP: ffffffffa000005c R08: 0000000000000000 R09: ffffffff8206e6e0 R10: ffff88807b01f4c0 R11: ffffffff8176c106 R12: ffffffff8206e6e0 R13: ffffffff824f2440 R14: 0000000000000000 R15: ffffffff8206eac0 FS: 0000000000000000(0000) GS:ffff88807d400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffa000005c CR3: 0000000002012000 CR4: 00000000000006b0 Call Trace: text_poke_bp+0x27/0x64 ? mutex_lock+0x36/0x5d arch_ftrace_update_trampoline+0x287/0x2d5 ? ftrace_replace_code+0x14b/0x160 ? ftrace_update_ftrace_func+0x65/0x6c __register_ftrace_function+0x6d/0x81 ftrace_startup+0x23/0xc1 register_ftrace_function+0x20/0x37 func_set_flag+0x59/0x77 __set_tracer_option.isra.19+0x20/0x3e trace_set_options+0xd6/0x13e apply_trace_boot_options+0x44/0x6d register_tracer+0x19e/0x1ac early_trace_init+0x21b/0x2c9 start_kernel+0x241/0x518 ? load_ucode_intel_bsp+0x21/0x52 secondary_startup_64+0xa4/0xb0 I was able to trigger it on other machines, when I added to the kernel command line of both "ftrace=function" and "trace_options=func_stack_trace". The cause is the "ftrace=function" would register the function tracer and create a trampoline, and it will set it as executable and read-only. Then the "trace_options=func_stack_trace" would then update the same trampoline to include the stack tracer version of the function tracer. But since the trampoline already exists, it updates it with text_poke_bp(). The problem is that text_poke_bp() called while system_state == SYSTEM_BOOTING, it will simply do a memcpy() and not the page mapping, as it would think that the text is still read-write. But in this case it is not, and we take a fault and crash. Instead, lets keep the ftrace trampolines read-write during boot up, and then when the kernel executable text is set to read-only, the ftrace trampolines get set to read-only as well. Link: https://lkml.kernel.org/r/20200430202147.4dc6e2de@oasis.local.home Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: stable@vger.kernel.org Fixes: 768ae440 ("x86/ftrace: Use text_poke()") Acked-by:
Peter Zijlstra <peterz@infradead.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing fixes from Steven Rostedt: "Fixes to previous fixes. Unfortunately, the last set of fixes introduced some minor bugs: - The bootconfig apply_xbc() leak fix caused the application to return a positive number on success, when it should have returned zero. - The preempt_irq_delay_thread fix to make the creation code wait for the kthread to finish to prevent it from executing after module unload, can now cause the kthread to exit before it even executes (preventing it to run its tests). - The fix to the bootconfig that fixed the initrd to remove the bootconfig from causing the kernel to panic, now prints a warning that the bootconfig is not found, even when bootconfig is not on the command line" * tag 'trace-v5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: bootconfig: Fix to prevent warning message if no bootconfig option tracing: Wait for preempt irq delay thread to execute tools/bootconfig: Fix apply_xbc() to return zero on success
-
