- 24 Nov, 2009 16 commits
-
-
Yinghai Lu authored
Those functions are used by intel_bus.c so seperate them to another file. and make amd_bus a bit smaller. Signed-off-by:
Yinghai Lu <yinghai@kernel.org> Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org>
-
Jiri Kosina authored
Signed-off-by:
André Goddard Rosa <andre.goddard@gmail.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Alex Chiang authored
commit db635adc turned -DDEBUG for x86/pci on when CONFIG_PCI_DEBUG is set. In general, I agree with that change. However, it exposes a bunch of very low level PCI debugging in the early x86 path, such as: 0 reading 2 from a: ffff 1 reading 2 from a: ffff 2 reading 2 from a: ffff 3 reading 2 from a: 300 3 reading 2 from 0: 1002 3 reading 2 from 2: 515e These statements add a lot of noise to the boot and aren't likely to be necessary even when handling random upstream bug reports. [In contrast, statements such as these: pci 0000:02:04.0: found [14e4:164a] class 000200 header type 00 pci 0000:02:04.0: reg 10: [mem 0xf8000000-0xf9ffffff 64bit] pci 0000:02:04.0: reg 30: [mem 0x00000000-0x0001ffff pref] are indeed useful when remote debugging users' machines] Remove the noisy printks and save electrons everywhere. Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
Alex Chiang <achiang@hp.com> Signed-off-by:
-
Kenji Kaneshige authored
Enabling power fault detected event notification in current pciehp might cause power fault interrupt storm on some machines. On those machines. On those machines, power fault detected bit in the slot status register was set again immediately when it is cleared in the interrupt service routine, and next power fault detected interrupt was notified again. Therefore, disable power fault detected event notification for now. This patch also removes unnecessary handling for power fault cleared event because this event is not supported by PCIe spec. Tested-by:
Jens Axboe <jens.axboe@oracle.com> Signed-off-by:
Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by:
-
Kenji Kaneshige authored
Change for PCI hotplug to use pci_is_pcie() instead of checking pci_dev->is_pcie. Signed-off-by:
-
Kenji Kaneshige authored
Changes for PCIe AER driver to use pci_is_pcie() instead of checking pci_dev->is_pcie. Signed-off-by:
-
Kenji Kaneshige authored
Change for PCIe ASPM driver to use pci_is_pcie() instead of checking pci_dev->is_pcie. Signed-off-by:
-
Kenji Kaneshige authored
Change for PCI core to use pci_is_pcie() instead of checking pci_dev->is_pcie. Signed-off-by:
-
Kenji Kaneshige authored
Introduce pci_is_pcie() which returns true if the specified PCI device is PCI Express capable, false otherwise. The purpose of pci_is_pcie() is removing 'is_pcie' flag in the struct pci_dev, which is not needed because we can check it using 'pcie_cap' field. To remove 'is_pcie', we need to update user of 'is_pcie' to use pci_is_pcie() instead first. Signed-off-by:
-
Kenji Kaneshige authored
Use pci_pcie_cap() instead of pci_find_capability() to get PCIe capability offset in pciehp driver. This avoids unnecessary search in PCI configuration space. This patch also removes 'cap_base' field in struct controller, that was used to hold PCIe capability offset by pciehp itself. Signed-off-by:
-
Kenji Kaneshige authored
Use pci_pcie_cap() instead of pci_find_capability() to get PCIe capability offset in PCI hotplug core. This avoids unnecessary search in PCI configuration space. Signed-off-by:
-
Kenji Kaneshige authored
Use pci_pcie_cap() instead of pci_find_capability() to get PCIe capability offset in PCIe ASPM driver. This avoids unnecessary search in PCI configuration space. Signed-off-by:
-
Kenji Kaneshige authored
Use pci_pcie_cap() instead of pci_find_capability() to get PCIe capability offset in PCI Express Port Bus driver. This avoids unnecessary serarch in PCI configuration space. Signed-off-by:
-
Kenji Kaneshige authored
Use pcie_cap() instead of pci_find_capability() to get PCIe capability offset in PCIe AER driver. This avoids unnecessary search in PCI configuration space. Signed-off-by:
-
Kenji Kaneshige authored
Use pcie_cap() instead of pci_find_capability() to get PCIe capability offset in PCI core code. This avoids unnecessary search in PCI configuration space. Signed-off-by:
-
Kenji Kaneshige authored
Introduce pci_pcie_cap() API that returns saved PCIe capability offset (currently it is saved in 'pcie_cap' field in the struct PCI dev). Using pci_pcie_cap() instead of pci_find_capability() avoids unnecessary search in PCI configuration space. Signed-off-by:
-
- 11 Nov, 2009 1 commit
-
-
Linus Torvalds authored
I'm not entirely sure it needs to go into 32, but it's probably the right thing to do. Another way of explaining the patch is: - we currently pick the _first_ exactly matching bus resource entry, but the _last_ inexactly matching one. Normally first/last shouldn't matter, but bus resource entries aren't actually all created equal: in a transparent bus, the last resources will be the parent resources, which we should generally try to avoid unless we have no choice. So "first matching" is the thing we should always aim for. - the patch is a bit bigger than it needs to be, because I simplified the logic at the same time. It used to be a fairly incomprehensible if ((res->flags & IORESOURCE_PREFETCH) && !(r->flags & IORESOURCE_PREFETCH)) best = r; /* Approximating prefetchable by non-prefetchable */ and technically, all the patch did was to make that complex choice be even more complex (it basically added a "&& !best" to say that if we already gound a non-prefetchable window for the prefetchable resource, then we won't override an earlier one with that later one: remember "first matching"). - So instead of that complex one with three separate conditionals in one, I split it up a bit, and am taking advantage of the fact that we already handled the exact case, so if 'res->flags' has the PREFETCH bit, then we already know that 'r->flags' will _not_ have it. So the simplified code drops the redundant test, and does the new '!best' test separately. It also uses 'continue' as a way to ignore the bus resource we know doesn't work (ie a prefetchable bus resource is _not_ acceptable for anything but an exact match), so it turns into: /* We can't insert a non-prefetch resource inside a prefetchable parent .. */ if (r->flags & IORESOURCE_PREFETCH) continue; /* .. but we can put a prefetchable resource inside a non-prefetchable one */ if (!best) best = r; instead. With the comments, it's now six lines instead of two, but it's conceptually simpler, and I _could_ have written it as two lines: if ((res->flags & IORESOURCE_PREFETCH) && !best) best = r; /* Approximating prefetchable by non-prefetchable */ but I thought that was too damn subtle. Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
- 06 Nov, 2009 6 commits
-
-
Thomas Gleixner authored
SPIN_LOCK_UNLOCKED is deprecated. Use DEFINE_SPINLOCK instead. Make the lock static while at it. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Isaku Yamahata authored
This patch fixes the following compilation error introduced by a PCI related features. The change set of 5dd1af9f84c79bedd589db89e71ca733f3bf0ebd moves some xen related definitions from the arch header file (x86/include/asm/xen/hypervisor.h) to the common header file (include/xen/xen.h). So ia64/xen also follows it. In file included from linux-next/include/xen/grant_table.h:41, from linux-next/drivers/block/xen-blkfront.c:48: linux-next/arch/ia64/include/asm/xen/hypervisor.h:43: error: nested redefinition of 'enum xen_domain_type' linux-next/arch/ia64/include/asm/xen/hypervisor.h:43: error: redeclaration of 'enum xen_domain_type' linux-next/arch/ia64/include/asm/xen/hypervisor.h:44: error: redeclaration of enumerator 'XEN_NATIVE' linux-next/include/xen/xen.h:5: error: previous definition of 'XEN_NATIVE' was here linux-next/arch/ia64/include/asm/xen/hypervisor.h:45: error: redeclaration of enumerator 'XEN_PV_DOMAIN' linux-next/include/xen/xen.h:6: error: previous definition of 'XEN_PV_DOMAIN' was here linux-next/arch/ia64/include/asm/xen/hypervisor.h:46: error: redeclaration of enumerator 'XEN_HVM_DOMAIN' linux-next/include/xen/xen.h:7: error: previous definition of 'XEN_HVM_DOMAIN' was here Signed-off-by:Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by:
-
Kenji Kaneshige authored
If firmware doesn't grant over native hotplug control through ACPI _OSC method, we must not evaluate OSHP. Acked-by:
Andrew Patterson <andrew.patterson@hp.com> Signed-off-by:
-
Andreas Herrmann authored
In case of AMD CPU northbridge functions this NUMA information might differ. Here is an example from a 4-socket system. Currently Linux shows root@hagen:/sys/devices/pci0000:00/0000:00:1a.4# cat numa_node 0 root@hagen:/sys/devices/pci0000:00/0000:00:1a.4# cat local_cpu* 0-3 00000000,0000000f which is not correct for northbridge functions as the local CPUs are those of the same socket. With this patch and a quirk for AMD CPU NB functions Linux can do better and correctly show root@hagen:/sys/devices/pci0000:00/0000:00:1a.4# cat numa_node 2 root@hagen:/sys/devices/pci0000:00/0000:00:1a.4# cat local_cpu* 8-11 00000000,00000f00 Signed-off-by:
Andreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by:
-
Bjorn Helgaas authored
The roundup() caused a build error (undefined reference to `__udivdi3'). We're aligning to power-of-two boundaries, so it's simpler to just use ALIGN() anyway, which avoids the division. Signed-off-by:
Bjorn Helgaas <bjorn.helgaas@hp.com> Acked-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Kenji Kaneshige authored
There are a lot of codes that searches PCI express capability offset in the PCI configuration space using pci_find_capability(). Caching it in the struct pci_dev will reduce unncecessary search. This patch adds an additional 'pcie_cap' fields into struct pci_dev, which is initialized at pci device scan time (in set_pcie_port_type()). Signed-off-by:
-
- 04 Nov, 2009 17 commits
-
-
Bjorn Helgaas authored
When "allocate_resource(root, new, size, ...)" fails, we currently clobber "new". This is inconvenient for the caller, who might care about the original contents of the resource. For example, when pci_bus_alloc_resource() fails, the "can't allocate mem resource %pR" message from pci_assign_resources() currently contains junk for the resource start/end. This patch delays the "new" update until we're about to return success. Acked-by:
Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by:
-
Bjorn Helgaas authored
PCI device BARs are guaranteed to start and end on at least a four-byte (I/O) or a sixteen-byte (MMIO) boundary because they're aligned on their size and the low BAR bits are reserved. PCI-to-PCI bridge apertures have even larger alignment restrictions. However, some BIOSes (e.g., HP DL360 BIOS P31) report host bridge windows like "[io 0x0000-0x2cfe]". This is wrong because it excludes the last port at 0x2cff: it's impossible for a downstream device to claim 0x2cfe without also claiming 0x2cff. In fact, this BIOS configures a device behind the bridge to "[io 0x2c00-0x2cff]", so we know the window actually does include 0x2cff. This patch rounds the start and end of apertures to the appropriate boundary. I experimentally determined that Windows contains a similar workaround; details here: http://bugzilla.kernel.org/show_bug.cgi?id=14337Signed-off-by: -
Bjorn Helgaas authored
We have occasional problems with PCI resource allocation, and sometimes they could be avoided by paying attention to what ACPI tells us about the host bridges. This patch doesn't change the behavior, but it prints window information that should make debugging easier. Signed-off-by:
-
Bjorn Helgaas authored
This makes PCI resource management messages more consistent and adds a few new messages to aid debugging. Whenever we assign resources to a device, update a BAR, or change a bridge aperture, it's worth noting it. Signed-off-by:
-
Bjorn Helgaas authored
Since we have a struct device, we might as well use dev_printk. Note that both pr_debug() and dev_dbg() are completely compiled out unless DEBUG or DYNAMIC_DEBUG is defined. Signed-off-by:
-
Bjorn Helgaas authored
Use the dev_printk-like "%04x:%02x" format for printing PCI bus numbers. Signed-off-by:
-
Bjorn Helgaas authored
Messages about PME# being supported and enabled/disabled are probably useful for debug, but maybe don't need to be on the console. Signed-off-by:
-
Thadeu Lima de Souza Cascardo authored
Commit 3b073eda has removed pci_find_slot, so there's no point in mentioning it in the config description as one of the deprecated APIs there are enabled by PCI_LEGACY and still used by some drivers. Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by:
-
Bjorn Helgaas authored
Jesse accidentally applied v1 [1] of the patchset instead of v2 [2]. This is the diff between v1 and v2. The changes in this patch are: - tidied vsprintf stack buffer to shrink and compute size more accurately - use %pR for decoding and %pr for "raw" (with type and flags) instead of adding %pRt and %pRf [1] http://lkml.org/lkml/2009/10/6/491 [2] http://lkml.org/lkml/2009/10/13/441Signed-off-by: -
Stefan Assmann authored
AMD 813x rev. B1 (like rev. B2) devices generate no interrupts if quirk_disable_amd_813x_boot_interrupt is executed, add an exception. http://bugzilla.kernel.org/show_bug.cgi?id=14159 Patch also adds missing cases for DECLARE_PCI_FIXUP_RESUME and DECLARE_PCI_FIXUP_FINAL calls to quirk_disable_amd_813x_boot_interrupt. Signed-off-by:
Stefan Assmann <sassmann@redhat.com> Tested-by:
Gabriele Giorgetti <g.giorgetti@teamsystem.com> Signed-off-by:
-
Alex Chiang authored
Using list_for_each_entry instead of list_for_each allows us to enhance readability and minorly reduce some stack usage. Signed-off-by:
-
Bjorn Helgaas authored
This patch moves PCI I/O APIC support from acpiphp to a separate driver. Like pciehp and shpchp, acpiphp handles PCI hotplug, i.e., addition and removal of PCI adapters. But in addition, acpiphp handles some ACPI hotplug, such as the addition of new host bridges, and the I/O APIC support was tangled up with that. I don't think the I/O APIC support needs to be in acpiphp; PCI I/O APICs usually appear as a function on a PCI host bridge, and we'll enumerate the APIC before any of the devices behind the bridge that use it. As far as I know, nobody actually uses I/O APIC hotplug. It depends on acpi_register_ioapic(), which is only implemented for ia64, and I don't think any vendors have supported I/O chassis hotplug yet. Signed-off-by:
-
Andrew Patterson authored
Fixed probable typo in aer_inject cleanup code resulting in a memory leak. Acked-by:
Huang Ying <ying.huang@intel.com> Signed-off-by:
-
Andrew Patterson authored
Replaced some error return values in aer_inject. Use -ENODEV when we can't find a device and -ENOTTY when the device does not support PCIe AER. Acked-by:
-
Andrew Patterson authored
Add support for PCI domains (segments) to aer_inject. Acked-by:
-
Andrew Patterson authored
Added the pci_get_domain_and_slot_function which is analogous to pci_get_bus_and_slot. It returns a pci_dev given a domain (segment) number, bus number, and devnr. Like pci_get_bus_and_slot, pci_get_domain_bus_and_slot holds a reference to the returned pci_dev. Converted pci_get_bus_and_slot to a wrapper that calls pci_get_domain_bus_and_slot with the domain hard-coded to 0. This routine was patterned off code suggested by Bjorn Helgaas. Acked-by:
-
Gabe Black authored
Change to populate the subsystem vendor and subsytem device IDs for PCI-PCI bridges that implement the PCI Subsystem Vendor ID capability. Previously bridges left subsystem vendor IDs unpopulated. Signed-off-by:
Gabe Black <gabe.black@ni.com> Signed-off-by:
-
