- 08 Oct, 2018 40 commits
-
-
Chunyan Zhang authored
ADMA2 64-bit addressing support is divided into V3 mode and V4 mode. So there are two kinds of descriptors for ADMA2 64-bit addressing i.e. 96-bit Descriptor for V3 mode, and 128-bit Descriptor for V4 mode. 128-bit Descriptor is aligned to 8-byte. For V4 mode, ADMA2 64-bit addressing is enabled via Host Control 2 register. Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> [Ulf: Fixed conflict while applying] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Chunyan Zhang authored
According to the SD host controller specification version 4.10, when Host Version 4 is enabled, SDMA uses ADMA System Address register (05Fh-058h) instead of using SDMA System Address register to support both 32-bit and 64-bit addressing. Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Chunyan Zhang authored
For SD host controller version 4.00 or later ones, there're two modes of implementation - Version 3.00 compatible mode or Version 4 mode. This patch introduced an interface to enable v4 mode. Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Chunyan Zhang authored
Added definitions for v400, v410, v420. Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
YueHaibing authored
Fix inconsistent IS_ERR and PTR_ERR in tegra_sdhci_init_pinctrl_info, the proper pointer to be passed as argument is 'pinctrl_state_1v8' Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Aapo Vienamo <aapo.vienamo@iki.fi> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Aapo Vienamo authored
Rerun the pad calibration procedure before sdhci_request() if the 100 ms recalibration interval has been exceeded. Signed-off-by: Aapo Vienamo <avienamo@nvidia.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Aapo Vienamo authored
Implement HS400 specific delay line calibration procedure. This is a Tegra specific procedure and has to be performed regardless whether enhanced strobe or HS400 tuning is used. Signed-off-by: Aapo Vienamo <avienamo@nvidia.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Aapo Vienamo authored
Implement eMMC HS400 enhanced strobe. Enhanced strobe is an alternative mechanism to the HS400 tuning procedure. Signed-off-by: Aapo Vienamo <avienamo@nvidia.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Aapo Vienamo authored
Parse and program the HS400 DQS trim value from DT. Program a fallback value in case the property is missing. Signed-off-by: Aapo Vienamo <avienamo@nvidia.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Aapo Vienamo authored
Document HS400 DQS trim value device tree property. Signed-off-by: Aapo Vienamo <avienamo@nvidia.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Aapo Vienamo authored
Set nvquirks to enable higher speed modes. Signed-off-by: Aapo Vienamo <avienamo@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Aapo Vienamo authored
Set nvquirks to enable higher speed modes. Signed-off-by: Aapo Vienamo <avienamo@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Aapo Vienamo authored
Implement tegra210_sdhci_writew() to disable card clock and issue a reset when the tuning command is sent. This is done to prevent an intermittent hang with around 10 % failure rate during tuning. Add tegra186_sdhci_ops because this workaround is specific to Tegra210. Signed-off-by: Aapo Vienamo <avienamo@nvidia.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Aapo Vienamo authored
tegra_sdhci_writew() defers the write to SDHCI_TRANSFER_MODE until SDHCI_COMMAND is written. This is not necessary on Tegra210 and Tegra186 and it breaks read-modify-write operations on SDHCI_TRANSFER_MODE because writes to SDHCI_TRANSFER_MODE aren't visible until SDHCI_COMMAND has been written to. This results in tuning failures on Tegra210. Signed-off-by: Aapo Vienamo <avienamo@nvidia.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Aapo Vienamo authored
Add a new sdhci_ops struct for Tegra210 and Tegra186 which doesn't set the custom tuning callback used on previous SoC generations. Signed-off-by: Aapo Vienamo <avienamo@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Aapo Vienamo authored
Program the outbound sampling trim value in tegra_sdhci_reset(). Unlike the outbound tap value this does not depend on the signaling mode and needs to be only programmed once. Signed-off-by: Aapo Vienamo <avienamo@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Aapo Vienamo authored
Set the default inbound timing adjustment tap value on reset and on non-tunable modes. The default tap value is not programmed on tunable modes because the tuning sequence is used instead to determine the tap value. Signed-off-by: Aapo Vienamo <avienamo@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Aapo Vienamo authored
Parse the default inbound and outbound sampling trimmer values from the device tree. Signed-off-by: Aapo Vienamo <avienamo@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Aapo Vienamo authored
Add quirk to disable the card clock during configuration of the tap value in tegra_sdhci_set_tap() and issue sdhci_reset() after value change. This is a workaround to avoid propagation of a potential glitch caused by setting the tap value. Signed-off-by: Aapo Vienamo <avienamo@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Aapo Vienamo authored
Set NVQUIRK_HAS_PADCALIB on Tegra210 and Tegra186 to enable automatic pad drive strength calibration. Signed-off-by: Aapo Vienamo <avienamo@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Aapo Vienamo authored
Run the automatic pad calibration after voltage switching if tegra_host->pad_calib_required is set. Signed-off-by: Aapo Vienamo <avienamo@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Aapo Vienamo authored
Parse the pad drive strength calibration offsets from the device tree. Program the calibration offsets in accordance with the current signaling mode. Signed-off-by: Aapo Vienamo <avienamo@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Aapo Vienamo authored
Disable the card clock during automatic pad drive strength calibration and re-enable it afterwards. Signed-off-by: Aapo Vienamo <avienamo@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Aapo Vienamo authored
Automatic pad drive strength calibration is performed on a separate pad identical to the ones used for driving the actual bus. Power on the calibration pad during the calibration procedure and power it off afterwards to save power. Signed-off-by: Aapo Vienamo <avienamo@nvidia.com> Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Aapo Vienamo authored
Configure the voltage reference used by the automatic pad drive strength calibration procedure. The value is a magic number from the TRM. Signed-off-by: Aapo Vienamo <avienamo@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Aapo Vienamo authored
Implement polling with 10 ms timeout for automatic pad drive strength calibration. Signed-off-by: Aapo Vienamo <avienamo@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Aapo Vienamo authored
Parse the pinctrl state and nvidia,only-1-8-v properties from the device tree. Validate the pinctrl and regulator configuration before unmasking UHS modes. Implement pad voltage state reconfiguration in the mmc start_signal_voltage_switch() callback. Add NVQUIRK_NEEDS_PAD_CONTROL and add set it for Tegra210 and Tegra186. The pad configuration is done in the mmc callback because the order of pad reconfiguration and sdhci voltage switch depend on the voltage to which the transition occurs. Signed-off-by: Aapo Vienamo <avienamo@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Aapo Vienamo authored
Document the Tegra SDHCI inbound and outbound sampling trimmer values. Signed-off-by: Aapo Vienamo <avienamo@nvidia.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Aapo Vienamo authored
Add bindings documentation for pad pull up and pull down offset values to be programmed before executing automatic pad drive strength calibration. Signed-off-by: Aapo Vienamo <avienamo@nvidia.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Aapo Vienamo authored
Document the pinctrl bindings used by the SDHCI driver to reconfigure pad voltages on controllers supporting multiple voltage levels. Signed-off-by: Aapo Vienamo <avienamo@nvidia.com> Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Wolfram Sang authored
This variable is unused now after some refactoring. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Wolfram Sang authored
Concise, but still readable. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Masaharu Hayakawa authored
SDR104, HS200 and HS400 need to check for SCC error. If SCC error is detected, retuning is necessary. Signed-off-by: Masaharu Hayakawa <masaharu.hayakawa.ry@renesas.com> [Niklas: update commit message] Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Masaharu Hayakawa authored
Checking for SCC error during retuning is unnecessary. Signed-off-by: Masaharu Hayakawa <masaharu.hayakawa.ry@renesas.com> [Niklas: fix small style issue] Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Niklas Söderlund authored
Add a helper to allow host drivers checking if a retune is in progress. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Masahiro Yamada authored
for (clk = 0x80000080; new_clock >= (clock << 1); clk >>= 1) clock <<= 1; ... is too tricky, hence I replaced with roundup_pow_of_two(divisor) >> 2 '(clk >> 22) & 0x1' is the bit test for the 1/1 divisor, but it is not clear. 'divisor <= 1' is easier to understand. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Masahiro Yamada authored
renesas_sdhi_clk_start() and renesas_sdhi_clk_stop() are now only called from renesas_sdhi_set_clock(). Merge them. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Jisheng Zhang authored
When using DMA, if the DMA addr spans 128MB boundary, we have to split the DMA transfer into two so that each one doesn't exceed the boundary. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Jisheng Zhang authored
Add this hook so that it can be overridden with driver specific implementations. We also let the original sdhci_adma_write_desc() accept &desc so that the function can set its new value. Then export the function so that it could be reused by driver's specific implementations. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Jisheng Zhang authored
This patch adds adma_table_cnt member to struct sdhci_host to give more flexibility to drivers to control the ADMA table count. Default value of adma_table_cnt is set to (SDHCI_MAX_SEGS * 2 + 1). Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-