- 27 Jun, 2016 27 commits
-
-
Russell King authored
Separate out the generation of MII registers from the state validation. This allows us to simplify the error handing in fixed_phy() by allowing earlier error detection. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Russell King authored
Convert the swphy register generation to tabular form which allows us to eliminate multiple switch() statements. This results in a smaller object code size, more efficient, and easier to add support for faster speeds. Before: Idx Name Size VMA LMA File off Algn 0 .text 00000164 00000000 00000000 00000034 2**2 text data bss dec hex filename 388 0 0 388 184 swphy.o After: Idx Name Size VMA LMA File off Algn 0 .text 000000fc 00000000 00000000 00000034 2**2 5 .rodata 00000028 00000000 00000000 00000138 2**2 text data bss dec hex filename 324 0 0 324 144 swphy.o Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Russell King authored
Move the fixed_phy MII register generation to a library to allow other software phy implementations to use this code. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'linux-can-next-for-4.8-20160623' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2016-06-17 this is a pull request of 4 patches for net-next/master. Arnd Bergmann's patch fixes a regresseion in af_can introduced in linux-can-next-for-4.8-20160617. There are two patches by Ramesh Shanmugasundaram, which add CAN-2.0 support to the rcar_canfd driver. And a patch by Ed Spiridonov that adds better error diagnoses messages to the Ed Spiridonov driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Amitoj Kaur Chawla authored
Replace calls to kmalloc followed by a memcpy with a direct call to kmemdup. The Coccinelle semantic patch used to make this change is as follows: @@ expression from,to,size,flag; statement S; @@ - to = \(kmalloc\|kzalloc\)(size,flag); + to = kmemdup(from,size,flag); if (to==NULL || ...) S - memcpy(to, from, size); Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
trivial fixes to spelling mistakes of the words "excessive collisions" Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
trivial fixes to spelling mistakes of the word "descriptors" Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Saeed Mahameed says: ==================== Mellanox 100G mlx5e Ethernet extensions This series includes multiple features extensions for mlx5 Ethernet netdevice driver. Namely, TX Rate limiting, RX interrupt moderation, ethtool settings. TX Rate limiting: - ConnectX-4 rate limiting infrastructure - Set max rate NDO support RX interrupt moderation: - CQE based coalescing option (controlled via priv flags) - Adaptive RX coalescing ethtool settings: - priv flags callbacks - Support new ksettings API - Add 50G missing link mode - Support auto negotiation on/off Applied on top: 0e9390eb ("Merge branch 'mlxsw-next'") ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gal Pressman authored
Previous to this patch auto negotiation was reported off although it was on by default in hardware. This patch reports the correct information to ethtool and allows the user to toggle it on/off. Added another parameter to set port proto function in order to pass the auto negotiation field to the hardware. Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gal Pressman authored
Use new get/set link ksettings and remove get/set settings legacy callbacks. This allows us to use bitmasks longer than 32 bit for supported and advertised link modes and use modes that were previously not supported. Signed-off-by: Gal Pressman <galp@mellanox.com> CC: Ben Hutchings <bwh@kernel.org> CC: David Decotigny <decot@googlers.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gal Pressman authored
Add MLX5E_50GBASE_SR2 as ETHTOOL_LINK_MODE_50000baseSR2_Full_BIT. Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Cc: Ben Hutchings <bwh@kernel.org> Cc: David Decotigny <decot@googlers.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gal Pressman authored
Add ETHTOOL_LINK_MODE_50000baseSR2_Full_BIT bit. Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Cc: Ben Hutchings <bwh@kernel.org> Cc: David Decotigny <decot@googlers.com> Acked-By: David Decotigny <decot@googlers.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gal Pressman authored
Add a dedicated function to toggle port link. It should be called only after setting a port register. Toggle will set port link to down and bring it back up in case that it's admin status was up. Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gil Rockah authored
Striving for high message rate and low interrupt rate. Usage: ethtool -C <interface> adaptive-rx on/off Signed-off-by: Gil Rockah <gilr@mellanox.com> Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> CC: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tariq Toukan authored
In this mode the moderation timer will restart upon new completion (CQE) generation rather than upon interrupt generation. The outcome is that for bursty traffic the period timer will never expire and thus only the moderation frames counter will dictate interrupt generation, thus the interrupt rate will be relative to the incoming packets size. If the burst seizes for "moderation period" time then an interrupt will be issued immediately. CQE based moderation is off by default and can be controlled via ethtool set_priv_flags. Performance tested on ConnectX4-Lx 50G. Less packet loss in netperf UDP and TCP tests, with no bw degradation, for both single and multi streams, with message sizes of 64, 1024, 1472 and 32768 byte. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Gil Rockah <gilr@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gal Pressman authored
Introduce an infrastructure for getting/setting private net device flags. Currently a 'nop' priv flag is added, following patches will override the flag will actual feature specific flags. Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yevgeny Petrilin authored
Implement set_maxrate ndo. Use the rate index from the hardware table to attach to channel SQ/TXQ. In case of failure to configure new rate, the queue remains with unlimited rate. We save the configuration on priv structure and apply it each time Send Queues are being reinitialized (after open/close) operations. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yevgeny Petrilin authored
Configuring and managing HW rate limit tables. The HW holds a table of rate limits, each rate is associated with an index in that table. Later a Send Queue uses this index to set the rate limit. Multiple Send Queues can have the same rate limit, which is represented by a single entry in this table. Even though a rate can be shared, each queue is being rate limited independently of others. The SW shadow of this table holds the rate itself, the index in the HW table and the refcount (number of queues) working with this rate. The exported functions are mlx5_rl_add_rate and mlx5_rl_remove_rate. Number of different rates and their values are derived from HW capabilities. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Sathya Perla says: ==================== be2net: patch set Hi Dave, pls consider commiting the following patches to the net-next tree. Thanks! Patch 1 replaces the be_max_eqs() macro with two new macros called be_max_nic_eqs() and be_max_func_eqs() to clear confusion in that part of the code. Patch 2 adds support to configure asymmetric number of rx/tx queues via ethtool set-channels option. Patch 3 disables EVB when VFs are not enabled on a BE3 SR-IOV config to avoid the broadcast echo problem. Patch 4 updates copyright markings in be2net src files Patch 5 updates the be2net maintainers' list ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sathya Perla authored
This patch removes Padmanabh's name from the maintainers list as he's no longer with the company. It also adds the driver name on the headline to make it easy to lookup the maintainers list by the driver name. Signed-off-by: Sathya Perla <sathya.perla@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Somnath Kotur authored
This patch updates year and company name in the copyright markings in the be2net source files. Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Somnath Kotur authored
On SR-IOV profiles, when the user connects a Linux Bridge or OVS to a BE3 vport, they suffer the "broadcast/multicast echo" problem. BE3 EVB echoes broadcast and multicast packets back to PF's vport confusing the Linux bridge. BE3 relies on the src-mac addr being programmed on the interface to avoid sending back an echo of a broadcast or multicast packet on a vPort. When a Linux bridge is connected to a BE3, the mac-addr of the VM behind the bridge doesn't get configured on the vPort and so echo cancellation doesn't work. This patch worksaround this problem by disabling the EVB initially and re-enabling it *only* when SR-IOV is enabled by the user. For the driver fix to work, the BE3 FW version must be >= 11.1.84.0. Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sathya Perla authored
be2net so far supported creation of RX/TX queues only in pairs. On configs where rx and tx queue counts are different, creation of only the lesser number of queues has been supported. This patch now allows a combination of RX/TX-only channels along with combined channels. N TX-queues and M RX-queues can be created with the following cmds: ethtool -L ethX combined N rx M-N (when N < M) ethtool -L ethX combined M tx N-M (when M < N) Setting both RX-only and TX-only channels is still not supported. It is mandatory to create atleast one combined channel. Signed-off-by: Sathya Perla <sathya.perla@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sathya Perla authored
The EQs available on a function are shared between NIC and RoCE. The be_max_eqs() macro was so far being used to refer to the max number of EQs available for NIC. This has caused some confusion in the code. To fix this confusion this patch introduces a new macro called be_max_nic_eqs() to refer to the max number of EQs avialable for NIC only and renames be_max_eqs() to be_max_func_eqs(). Signed-off-by: Sathya Perla <sathya.perla@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Andy Duan says: ==================== net: fec: add new type device Different i.MX SOC FEC support different features like : - i.MX6Q/DL FEC does not support AVB and interrupt coalesc - i.MX6SX/i.MX7D supports AVB and interrupt coalesc - i.MX6UL/ULL does not support AVB, but support interrupt coalesc Then, add new quirk flag to judge the supported features, and add new type device for i.MX6UL. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Fugang Duan authored
i.MX6UL is a member in i.MX series family, the SOC FEC inherits from i.MX6SX but removes some IP features, lets define a new type for fec device. Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Fugang Duan authored
Different i.MX SOC FEC support different features like : - i.MX6Q/DL FEC does not support AVB and interrupt coalesc - i.MX6SX/i.MX7D supports AVB and interrupt coalesc - i.MX6UL/ULL does not support AVB, but support interrupt coalesc So, add new quirk flag to judge the supported features. Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 26 Jun, 2016 2 commits
-
-
David S. Miller authored
Merge tag 'rxrpc-rewrite-20160622-2' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs David Howells says: ==================== rxrpc: Get rid of conn bundle and transport structs Here's the next part of the AF_RXRPC rewrite. The primary purpose of this set is to get rid of the rxrpc_conn_bundle and rxrpc_transport structs. This simplifies things for future development of the connection handling. To this end, the following significant changes are made: (1) The rxrpc_connection struct is given pointers to the local and peer endpoints, inside the rxrpc_conn_parameters struct. Pointers to the transport's copy of these pointers are then redirected to the connection struct. (2) Exclusive connection handling is fixed. Exclusive connections should do just one call and then be retired. They are used in security negotiations and, I believe, the idea is to avoid reuse of negotiated security contexts. The current code is doing a single connection per socket and doing all the calls over that. With this change it gets a new connection for each call made. (3) A new sendmsg() control message marker is added to make individual calls operate over exclusive connections. This should be used in future in preference to the sockopt that marks a socket as "exclusive connection". (4) IDs for client connections initiated by a machine are now allocated from a global pool using the IDR facility and are unique across all client connections, no matter their destination. The IDR facility is then used to look up a connection on the connection ID alone. Other parameters are then verified afterwards. Note that the IDR facility may use a lot of memory if the IDs it holds are widely scattered. Given this, in a future commit, client connections will be retired if they are more than a certain distance from the last ID allocated. The client epoch is advanced by 1 each time the client ID counter wraps. Connections outside the current epoch will also be retired in a future commit. (5) The connection bundle concept is removed and the client connection tree is moved into the local endpoint. The queue for waiting for a call channel is moved to the rxrpc_connection struct as there can only be one connection for any particular key going to any particular peer now. (6) The rxrpc_transport struct is removed and the service connection tree is moved into the peer struct. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xing Zheng authored
Add constants and callback functions for the dwmac on rk3228/rk3229 socs. As can be seen, the base structure is the same, only registers and the bits in them moved slightly. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 25 Jun, 2016 11 commits
-
-
David S. Miller authored
Eric Dumazet says: ==================== net_sched: bulk dequeue and deferred drops First patch adds an additional parameter to ->enqueue() qdisc method so that drops can be done outside of critical section (after locks are released). Then fq_codel can have a small optimization to reduce number of cache lines misses during a drop event (possibly accumulating hundreds of packets to be freed). A small htb change exports the backlog in class dumps. Final patch adds bulk dequeue to qdiscs that were lacking this feature. This series brings a nice qdisc performance increase (more than 80 % in some cases). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
When qdisc bulk dequeue was added in linux-3.18 (commit 5772e9a3 "qdisc: bulk dequeue support for qdiscs with TCQ_F_ONETXQUEUE"), it was constrained to some specific qdiscs. With some extra care, we can extend this to all qdiscs, so that typical traffic shaping solutions can benefit from small batches (8 packets in this patch). For example, HTB is often used on some multi queue device. And bonding/team are multi queue devices... Idea is to bulk-dequeue packets mapping to the same transmit queue. This brings between 35 and 80 % performance increase in HTB setup under pressure on a bonding setup : 1) NUMA node contention : 610,000 pps -> 1,110,000 pps 2) No node contention : 1,380,000 pps -> 1,930,000 pps Now we should work to add batches on the enqueue() side ;) Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: John Fastabend <john.r.fastabend@intel.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Florian Westphal <fw@strlen.de> Cc: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
We already get child qdisc qlen, we also can get its backlog so that class dumps can report it. Also replace qstats by a single drop counter, but move it in a separate cache line so that drops do not dirty useful cache lines. Tested: $ tc -s cl sh dev eth0 class htb 1:1 root leaf 3: prio 0 rate 1Gbit ceil 1Gbit burst 500000b cburst 500000b Sent 2183346912 bytes 9021815 pkt (dropped 2340774, overlimits 0 requeues 0) rate 1001Mbit 517543pps backlog 120758b 499p requeues 0 lended: 9021770 borrowed: 0 giants: 0 tokens: 9 ctokens: 9 Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Now we defer skb drops, it makes sense to keep a copy of skb->truesize in struct codel_skb_cb to avoid one cache line miss per dropped skb in fq_codel_drop(), to reduce latencies a bit further. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Qdisc performance suffers when packets are dropped at enqueue() time because drops (kfree_skb()) are done while qdisc lock is held, delaying a dequeue() draining the queue. Nominal throughput can be reduced by 50 % when this happens, at a time we would like the dequeue() to proceed as fast as possible. Even FQ is vulnerable to this problem, while one of FQ goals was to provide some flow isolation. This patch adds a 'struct sk_buff **to_free' parameter to all qdisc->enqueue(), and in qdisc_drop() helper. I measured a performance increase of up to 12 %, but this patch is a prereq so that future batches in enqueue() can fly. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Raghu Vatsavayi says: ==================== liquidio: updates and bug fixes Please consider following patch series for liquidio bug fixes and updates on top of net-next. Following patches should be applied in the following order as some of them depend on earlier patches in the series. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Raghu Vatsavayi authored
Adds support for ddr_timeout during device init. Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <rvatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Raghu Vatsavayi authored
This patch adds support for private flags for the driver. Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <rvatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Raghu Vatsavayi authored
This patch has minor changes for proper ptp info retreival. Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <rvatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Raghu Vatsavayi authored
This patch adds support for host driver support for new Xaui interfaces. Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <rvatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Raghu Vatsavayi authored
This patch adds extensive support of statistics for data path, control path and firmware. Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <rvatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-