- 07 Feb, 2015 1 commit
-
-
Niklas Cassel authored
This is the last missing piece to get a kernel booting to a prompt in qemu-cris. Signed-off-by:
Niklas Cassel <nks@flawful.org> Acked-by:
Jesper Nilsson <jesper.nilsson@axis.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 03 Feb, 2015 2 commits
-
-
Fabian Frederick authored
sprop is unused in find_console_handle() since commit a752ee56 ("tty: Update hypervisor tty drivers to use core stdout parsing code.") Signed-off-by:
Fabian Frederick <fabf@skynet.be> Signed-off-by:
-
Lucas Stach authored
The general agreed way to specify a fixed line number for a serial console is to provide a "serial" alias in the devicetree. Start parsing this property in of_serial. Signed-off-by:
Lucas Stach <dev@lynxeye.de> Acked-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
- 02 Feb, 2015 37 commits
-
-
Marek Szyprowski authored
EarlyCon support depends on serial console infrastructure, so the code implementing it should depend on CONFIG_SERIAL_SAMSUNG_CONSOLE. This patch fixes the following build break: CC [M] drivers/tty/serial/samsung.o drivers/tty/serial/samsung.c:2468:1: error: expected declaration specifiers or ‘...’ before string constant drivers/tty/serial/samsung.c:2468:1: error: expected declaration specifiers or ‘...’ before ‘s3c2410_setup_earlycon’ drivers/tty/serial/samsung.c:2487:1: error: expected declaration specifiers or ‘...’ before string constant drivers/tty/serial/samsung.c:2487:1: error: expected declaration specifiers or ‘...’ before ‘s3c2412_setup_earlycon’ drivers/tty/serial/samsung.c:2488:1: error: expected declaration specifiers or ‘...’ before string constant drivers/tty/serial/samsung.c:2488:1: error: expected declaration specifiers or ‘...’ before ‘s3c2440_setup_earlycon’ drivers/tty/serial/samsung.c:2489:1: error: expected declaration specifiers or ‘...’ before string constant drivers/tty/serial/samsung.c:2489:1: error: expected declaration specifiers or ‘...’ before ‘s3c6400_setup_earlycon’ drivers/tty/serial/samsung.c:2506:1: error: expected declaration specifiers or ‘...’ before string constant drivers/tty/serial/samsung.c:2506:1: error: expected declaration specifiers or ‘...’ before ‘s5pv210_setup_earlycon’ drivers/tty/serial/samsung.c:2507:1: error: expected declaration specifiers or ‘...’ before string constant drivers/tty/serial/samsung.c:2507:1: error: expected declaration specifiers or ‘...’ before ‘exynos4210_setup_earlycon’ drivers/tty/serial/samsung.c:2468:1: warning: ‘s3c2410_setup_earlycon’ defined but not used [-Wunused-function] drivers/tty/serial/samsung.c:2487:1: warning: ‘s3c2412_setup_earlycon’ defined but not used [-Wunused-function] drivers/tty/serial/samsung.c:2488:1: warning: ‘s3c2440_setup_earlycon’ defined but not used [-Wunused-function] drivers/tty/serial/samsung.c:2489:1: warning: ‘s3c6400_setup_earlycon’ defined but not used [-Wunused-function] drivers/tty/serial/samsung.c:2506:1: warning: ‘s5pv210_setup_earlycon’ defined but not used [-Wunused-function] drivers/tty/serial/samsung.c:2507:1: warning: ‘exynos4210_setup_earlycon’ defined but not used [-Wunused-function] make[3]: *** [drivers/tty/serial/samsung.o] Error 1 Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
kbuild test robot authored
drivers/tty/serial/8250/8250_core.c:2503:6: sparse: symbol 'serial8250_set_divisor' was not declared. Should it be static? Signed-off-by:
-
Chunyan Zhang authored
Add a full sc9836-uart driver for SC9836 SoC which is based on the spreadtrum sharkl64 platform. This driver also support earlycon. Originally-by:
Lanqing Liu <lanqing.liu@spreadtrum.com> Signed-off-by:
Orson Zhai <orson.zhai@spreadtrum.com> Signed-off-by:
Chunyan Zhang <chunyan.zhang@spreadtrum.com> Acked-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Peter Hurley <peter@hurleysoftware.com> Signed-off-by:
-
Chunyan Zhang authored
Adds Spreadtrum's prefix "sprd" to vendor-prefixes file. Adds the devicetree binding documentations for Spreadtrum's sc9836-uart and SC9836 SoC based on the Sharkl64 Platform which is a 64-bit SoC Platform of Spreadtrum. Signed-off-by:
-
Robert Baldyga authored
Function s3c24xx_serial_start_tx_pio() enables interrupts if needed, so we don't have to (or even we shouldn't) enable them before. Signed-off-by:
Robert Baldyga <r.baldyga@samsung.com> Signed-off-by:
-
Peter Hurley authored
tty_set_termios() is an internal helper intended for file scope use. UART drivers which are capable of driving the RTS pin must properly handle the tiocmset() method, regardless of termios settings. A failure to do so is a UART driver bug and should be fixed there. Do not use this interface to workaround UART driver bugs. Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: <linux-bluetooth@vger.kernel.org> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Peter Hurley authored
The OMAP UART ignores MCR[1] (ie., RTS) when in autoRTS mode. This makes it impossible for either the serial core or userspace to manually flow control the sender. Disable autoRTS mode when RTS is lowered and restore the previous mode when RTS is raised. Signed-off-by:
-
Peter Hurley authored
Commit 88838d3112702 ("serial: omap_8250: Fix RTS handling") fixed RTS pin control when in autoRTS mode. New support added in "serial: core: Rework hw-assisted flow control support" enables a much simpler approach; rather than masking out autoRTS whenever writing the EFR register, use the UPSTAT_* mode to determine if autoRTS should be enabled when raising RTS (in omap8250_set_mctrl()). Signed-off-by: -
Peter Hurley authored
hw-assisted flow control support was added to the serial core in v3.8 with commits, dba05832 ("SERIAL: core: add hardware assisted h/w flow control support") 2cbacafd ("SERIAL: core: add hardware assisted s/w flow control support") 9aba8d5b ("SERIAL: core: add throttle/unthrottle callbacks for hardware assisted flow control") Since then, additional requirements for serial core support have arisen. Specifically, 1. Separate tx and rx flow control settings for UARTs which only support tx flow control (ie., autoCTS). 2. Disable sw-assisted CTS flow control in autoCTS mode 3. Support for RTS flow control by serial core and userspace in autoRTS mode Distinguish mode from capability; introduce UPSTAT_AUTORTS, UPSTAT_AUTOCTS and UPSTAT_AUTOXOFF which, when set by the uart driver, enable serial core support for hw-assisted rx, hw-assisted tx and hw-assisted in-band/IXOFF rx flow control, respectively. [Note: hw-assisted in-band/IXON tx flow control does not require serial core support/intervention and can be enabled by the uart driver when required.] These modes must be set/reset in the driver's set_termios() method, based on termios settings, and thus can be safely queried in any context in which one of the port lock, port mutex or termios rwsem are held. Set these modes in the 2 in-tree drivers, omap-serial and 8250_omap, which currently use UPF_HARD_FLOW/UPF_SOFT_FLOW support. Retain UPF_HARD_FLOW and UPF_SOFT_FLOW as capabilities; re-define UPF_HARD_FLOW as both UPF_AUTO_RTS and UPF_AUTO_CTS to allow for distinct and separate rx and tx flow control capabilities. Disable sw-assisted CTS flow control when UPSTAT_AUTOCTS is enabled. Signed-off-by:
-
Rob Herring authored
The PXA variant of the 8250 UART adds a UART enable bit which must not be cleared. Make the earlycon support maintain this bit if it is set. This implies some initialization of the UART, but we cannot unconditionally set the bit as some other variants require this bit to be clear for other functions. Signed-off-by:
Rob Herring <robh@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.cz> Cc: linux-serial@vger.kernel.org Signed-off-by:
-
Rob Herring authored
Add mrvl,pxa-uart and mrvl,mmp-uart compatible strings for the of_serial driver. These are 8250 variants which have a port type of PORT_XSCALE. There is also the serial driver pxa.c with these compatible strings already. However, it can be replaced with the common 8250 driver. It has some issues like it cannot coexist with the 8250 driver due to tty name collision. That also means adding these compatible strings here should not case a problem. Signed-off-by:
-
Rob Herring authored
Add support for alias parsing from the DT. This allows for consistent tty numbering. Signed-off-by:
-
Peter Hurley authored
The port shadow registers, ->fcr and ->mcr, must be protected from concurrent updates. Relocate the shadow register updates in serial8250_do_set_termios() to the port lock critical section. Signed-off-by:
-
Peter Hurley authored
When using no_console_suspend, the serial console may be powered off anyway during system sleep. Upon resume, the port may be in its default power-on state, but is expected to continue console i/o before the device has received its pm callback. The resultant garbage i/o can cause all kinds of havoc on the remote end. Use the scratch register as a canary to discover if the console has been powered-off. Write a non-zero value to the scratch register at port suspend and reprogram the port before any console i/o if the scratch register != canary before port resume. This workaround is disabled for omap_8250 (which uses different divisor programming). Credit to Doug Anderson <dianders@chromium.org> for the idea of using the scratch register canary to discover port power-down. Cc: Doug Anderson <dianders@chromium.org> Signed-off-by:
-
Peter Hurley authored
Exar XR17V35X PCIe uarts support a 4-bit fractional divisor register. Refactor the divisor calculation from the divisor programming. Allow a fractional result from serial8250_get_divisor() and pass this result to serial8250_dl_write(). Simplify the calculation for quot and quot_frac. This was verified to be identical to the results of the original calculation with a test jig. NB: The results were also compared with the divisor value chart on pg 33 of the Exar XR17V352 datasheet, rev 1.0.3, here: http://www.exar.com/common/content/document.ashx?id=1585 which differs from the calculated values by 1 in the fractional result. This is because the calculated values are still rounded in the fractional result, whereas the table values are truncated. Note that the data error rate % values in the datasheet are for rounded fractional results, as the truncated fractional results have more error. Cc: Joe Schultz <jschultz@xes-inc.com> Cc: Aaron Sierra <asierra@xes-inc.com> Signed-off-by:
-
Peter Hurley authored
Refactor divisor register programming into a new function, serial8250_set_divisor; this allows serial console to reinitialize early after resume from suspend. Signed-off-by:
-
Peter Hurley authored
Refactor the computation of the LCR register value from termios c_cflag into a new local function, serial8250_compute_lcr(). Signed-off-by:
-
Peter Hurley authored
The UART_BUG_QUOT workaround adjusts the divisor computed from the baud rate by serial8250_get_divisor(). Move the workaround into serial8250_get_divisor(), so that divisor-from-baud computation is encapsulated. Signed-off-by:
-
Johannes Thumshirn authored
16z135 IP Core has changed so the driver needs to be updated to respect these changes. The following changes have been made: * Don't invert the 16z135 modem status register when reading. * Add module parameter to configure the (baud rate dependent) RX timeout. Character timeout in seconds = (timeout_reg * baud_reg * 4)/freq_reg. * Enable the handling of UART core's automatic flow control feature. When AFE is active disable generation of modem status IRQs. * Rework the handling of IRQs to be conform with newer FPGA versions and take precautions not to miss an interrupt because of the destructive read of the IIR register. * Correct men_z135_handle_modem_status(), MSR is stat_reg[15:8] not stat_reg[7:0] * Correct calling of uart_handle_{dcd,cts}_change() * Reset CLOCAL when CRTSCTS is set Signed-off-by:Johannes Thumshirn <johannes.thumshirn@men.de> Reviewed-by:
-
Peter Hurley authored
When the uart port being suspended is a console and consoles are not suspending (kernel command line contains no_console_suspend), then no action is performed for that port, and the function can return early. If the function has not returned early, then one of the conditions is not true, so the expression (console_suspend_enabled || !uart_console(uport)) must be true and can be eliminated. Similarly, the expression (console_suspend_enabled && uart_console(uport)) simplifies to just uart_console(uport). Signed-off-by:
-
Stuart R. Anderson authored
Add support for specifying PCI based UARTs for earlyprintk using a syntax like "earlyprintk=pciserial,00:18.1,115200", where 00:18.1 is the BDF of a UART device. [Slightly tidied from Stuart's original patch] Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Peter Hurley authored
BRKINT and ISIG requires input and output flush when a signal char is received. However, the order of operations is significant since parallel i/o may be ongoing. Merge the signal handling for BRKINT with ISIG handling. Process the signal first. This ensures any ongoing i/o is aborted; without this, a waiting writer may continue writing after the flush occurs and after the signal char has been echoed. Write lock the termios_rwsem, which excludes parallel writers from pushing new i/o until after the output buffers are flushed; claiming the write lock is necessary anyway to exclude parallel readers while the read buffer is flushed. Subclass the termios_rwsem for ptys since the slave pty performing the flush may appear to reorder the termios_rwsem->tty buffer lock lock order; adding annotation clarifies that slave tty_buffer lock-> slave termios_rwsem -> master tty_buffer lock is a valid lock order. Flush the echo buffer. In this context, the echo buffer is 'output'. Otherwise, the output will appear discontinuous because the output buffer was cleared which contains older output than the echo buffer. Open-code the read buffer flush since the input worker does not need kicking (this is the input worker). Signed-off-by:
-
Peter Hurley authored
The pty driver does not clear its write buffer when commanded. This is to avoid an apparent deadlock between parallel flushes from both pty ends; specifically when handling either BRK or INTR input. However, parallel flushes from this source is not possible since the pty master can never be set to BRKINT or ISIG. Parallel flushes from other sources are possible but these do not threaten deadlocks. Annotate the tty buffer mutex for lockdep to represent the nested tty_buffer locking which occurs when the pty slave is processing input (its buffer mutex held) and receives INTR or BRK and acquires the linked tty buffer mutex via tty_buffer_flush(). Signed-off-by:
-
Peter Hurley authored
Besides nested legacy_mutex locking which is required on pty pair teardown, other nested pty operations require lock subclassing. Move lock subclass definition to tty interface header, include/linux/tty.h, and document its use. Signed-off-by:
-
Peter Hurley authored
In canon mode, the read buffer head will advance over the buffer tail if the input > 4095 bytes without receiving a line termination char. Discard additional input until a line termination is received. Before evaluating for overflow, the 'room' value is normalized for I_PARMRK and 1 byte is reserved for line termination (even in !icanon mode, in case the mode is switched). The following table shows the transform: actual buffer | 'room' value before overflow calc space avail | !I_PARMRK | I_PARMRK -------------------------------------------------- 0 | -1 | -1 1 | 0 | 0 2 | 1 | 0 3 | 2 | 0 4+ | 3 | 1 When !icanon or when icanon and the read buffer contains newlines, normalized 'room' values of -1 and 0 are clamped to 0, and 'overflow' is 0, so read_head is not adjusted and the input i/o loop exits (setting no_room if called from flush_to_ldisc()). No input is discarded since the reader does have input available to read which ensures forward progress. When icanon and the read buffer does not contain newlines and the normalized 'room' value is 0, then overflow and room are reset to 1, so that the i/o loop will process the next input char normally (except for parity errors which are ignored). Thus, erasures, signalling chars, 7-bit mode, etc. will continue to be handled properly. If the input char processed was not a line termination char, then the canon_head index will not have advanced, so the normalized 'room' value will now be -1 and 'overflow' will be set, which indicates the read_head can safely be reset, effectively erasing the last char processed. If the input char processed was a line termination, then the canon_head index will have advanced, so 'overflow' is cleared to 0, the read_head is not reset, and 'room' is cleared to 0, which exits the i/o loop (because the reader now have input available to read which ensures forward progress). Note that it is possible for a line termination to be received, and for the reader to copy the line to the user buffer before the input i/o loop is ready to process the next input char. This is why the i/o loop recomputes the room/overflow state with every input char while handling overflow. Finally, if the input data was processed without receiving a line termination (so that overflow is still set), the pty driver must receive a write wakeup. A pty writer may be waiting to write more data in n_tty_write() but without unthrottling here that wakeup will not arrive, and forward progress will halt. (Normally, the pty writer is woken when the reader reads data out of the buffer and more space become available). Signed-off-by: -
Peter Hurley authored
If PARMRK is enabled, the available read buffer space computation is overly-pessimistic, which results in severely throttled i/o, even in the absence of parity errors. For example, if the 4k read buffer contains 1k processed data, the input worker will compute available space of 333 bytes, despite 3k being available. At 1365 chars of processed data, 0 space available is computed. *Divide remaining space* by 3, truncating down (if left == 2, left = 0). Reported-by:
Christian Riesch <christian.riesch@omicron.at> Conflicts: drivers/tty/n_tty.c Signed-off-by:
-
Peter Hurley authored
Add commit_head buffer index, which the producer-side publishes after input processing in non-canon mode. This ensures the consumer-side observes correctly-ordered writes in non-canonical mode (ie., the buffer data is written before the buffer index is advanced). Fix consumer-side uses of read_cnt() to use commit_head instead. Add required memory barriers to the tail index to guarantee the consumer-side has completed the loads before the producer-side begins writing new data. Open-code the producer-side receive_room() into the i/o loop. Remove no-longer-referenced receive_room(). Based on work by Christian Riesch <christian.riesch@omicron.at> Cc: Christian Riesch <christian.riesch@omicron.at> Signed-off-by:
-
Peter Hurley authored
The adjustments performed by receive_room() are to ensure a line termination can always be written to the read buffer. However, these adjustments are irrelevant to the throttle threshold (because the threshold < buffer limit). Signed-off-by:
-
Peter Hurley authored
The tty driver will be mistakenly throttled if a line termination has not been received, and the line exceeds 3967 chars. Thus, it is possible for the driver to stop sending when it has not yet sent the newline. This does not apply to the pty driver. Don't throttle until at least one line termination has been received. Signed-off-by:
-
Peter Hurley authored
The input worker never reschedules itself; it only processes input until either there is no more input or the read buffer is full. So the reader is responsible for restarting the input worker only if the read buffer was previously full (no_room == 1) _and_ space is now available to process more input because the reader has consumed data from the read buffer. However, computing the actual space available is not required to determine if the reader has consumed data from the read buffer. This condition is evaluated in 5 situations, each of which the space avail is already known: 1. n_tty_flush_buffer() - the read buffer is empty; kick the worker 2. n_tty_set_termios() - no data has been consumed; do not kick the worker (although it may have kicked the reader so data _will be_ consumed) 3. n_tty_check_unthrottle - avail space > 3968; kick the worker 4. n_tty_read, before leaving - only kick the worker if the reader has moved the tail. This prevents unnecessarily kicking the worker when timeout-style reading is used. 5. n_tty_read, before sleeping - although it is possible for the read buffer to be full and input_available_p() to be false, this can only happen when the input worker is racing the reader, in which case the reader will have been woken and won't sleep. Rename n_tty_set_room() to n_tty_kick_worker() to reflect what the function actually does. Signed-off-by: -
Tomasz Figa authored
This patch adds stdout-path property to chosen nodes of Exynos4 boards to enable use of earlycon feature without the need to hardcode port number in kernel itself. Signed-off-by:
Tomasz Figa <t.figa@samsung.com> Signed-off-by:
-
Tomasz Figa authored
This patch adds support for early console initialized from device tree and kernel command line to all variants of Samsung serial driver. Signed-off-by:
Alim Akhtar <alim.akhtar@samsung.com> Tested-by:
Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by:
-
Hisashi Nakamura authored
When fifo overrun happened, the interrupt status refers to SCLSR register in R-Car SCIF and HSCIF. Thus, overrun handling takes SCLSR register into account. Signed-off-by:
Hisashi Nakamura <hisashi.nakamura.ak@renesas.com> Signed-off-by:
Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by:
-
Yoshihiro Kaneko authored
Since the driver cannot return from overrun error if characters are output during overrun process, use dev_dbg() instead of dev_notice() to log the error message of overrun in syslog. Based on a patch by Hisashi Nakamura. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Andy Shevchenko authored
If we would like to send amount of data less than FIFO size we better would do this via PIO mode. Otherwise the overhead could be significant. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Andy Shevchenko authored
Since we return in the first branch the second one doesn't require an additional else keyword. The patch removes it. Signed-off-by:
-
Sergei Shtylyov authored
In order to make it possible to restore from hibernation not only in Linux but also in e.g. U-Boot, we have to use sci_{suspend|remove}() for the PM {freeze| thaw|restore}() methods. It's handy to achieve this by using SIMPLE_DEV_PM_OPS() macro, however we have to annotate sci_{suspend|remove}() with '__maybe_unused' in order to avoid compilation warnings when CONFIG_PM_SLEEP is undefined. Based on orignal patch by Mikhail Ulyanov <mikhail.ulyanov@cogentembedded.com>. Signed-off-by:Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
