- 18 Feb, 2007 2 commits
-
-
Steve Grubb authored
The following patch adds a new mode to the audit system. It uses the audit_enabled config option to introduce the idea of audit enabled, but configuration is immutable. Any attempt to change the configuration while in this mode is audited. To change the audit rules, you'd need to reboot the machine. To use this option, you'd need a modified version of auditctl and use "-e 2". This is intended to go at the end of the audit.rules file for people that want an immutable configuration. This patch also adds "res=" to a number of configuration commands that did not have it before. Signed-off-by:
Steve Grubb <sgrubb@redhat.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Steve Grubb authored
I was looking at parsing some of these messages and found that I wanted what it was doing next to an op= for the parser to key on. Also missing was the list number and results. Signed-off-by:
-
- 16 Feb, 2007 38 commits
-
-
git://www.atmel.no/~hskinnemoen/linux/kernel/avr32Linus Torvalds authored
* 'for-linus' of git://www.atmel.no/~hskinnemoen/linux/kernel/avr32: [AVR32] Use per-controller spi_board_info structures [AVR32] Warn, don't BUG if clk_disable is called too many times [AVR32] Make sure all genclocks have a parent [AVR32] Remove unnecessary sys_nfsservctl conditional [AVR32] Wire up the SysV IPC calls properly [AVR32] Define ioremap_nocache, ioport_map and ioport_unmap [AVR32] Fix prototypes for __raw_writesb and friends
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgart: [AGPGART] allow drm populated agp memory types cleanups [AGPGART] intel-agp: Use ARRAY_SIZE macro when appropriate [AGPGART] Add agp-type-to-mask-type method missing from some drivers. [AGPGART] Don't try to remap i810 registers on resume. [AGPGART] Allow drm-populated agp memory types [AGPGART] compat ioctl
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] Longhaul - Redo Longhaul ver. 2 [CPUFREQ] EPS - Correct 2nd brand test [CPUFREQ] Longhaul - Separate frequency and voltage transition [CPUFREQ] Longhaul - Models of Nehemiah [CPUFREQ] Whitespace fixup [CPUFREQ] Longhaul - Simplier minmult [CPUFREQ] CPU_FREQ_TABLE shouldn't be a def_tristate [CPUFREQ] ondemand governor use new cpufreq rwsem locking in work callback [CPUFREQ] ondemand governor restructure the work callback [CPUFREQ] Rewrite lock in cpufreq to eliminate cpufreq/hotplug related issues [CPUFREQ] Remove hotplug cpu crap [CPUFREQ] Enhanced PowerSaver driver [CPUFREQ] Longhaul - Add VT8235 support [CPUFREQ] Longhaul - Fix guess_fsb function [CPUFREQ] Longhaul - Remove duplicate tables [CPUFREQ] Longhaul - Introduce Nehemiah C [CPUFREQ] fix cpuinfo_cur_freq for CPU_HW_PSTATE [CPUFREQ] Longhaul - Remove "ignore_latency" option
-
Ben Dooks authored
The current driver is not setting the dev field in the private data structure, which can lead to an OOPS if the driver tries to report an error. Signed-off-by:
Ben Dooks <ben-linux@fluff.org> Cc: James Simmons <jsimmons@infradead.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Thomas Hisch authored
Add format specifier %d for uid in ecryptfs_printk Signed-off-by:
Thomas Hisch <t.hisch@gmail.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by:
-
Michael Halcrow authored
eCryptfs is gobbling a lot of stack in ecryptfs_generate_key_packet_set() because it allocates a temporary memory-hungry ecryptfs_key_record struct. This patch introduces a new kmem_cache for that struct and converts ecryptfs_generate_key_packet_set() to use it. Signed-off-by:
Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by:
-
NeilBrown authored
When NFSD receives a write request, the data is typically in a number of 1448 byte segments and writev is used to collect them together. Unfortunately, generic_file_buffered_write passes these to the filesystem one at a time, so an e.g. 32K over-write becomes a series of partial-page writes to each page, causing the filesystem to have to pre-read those pages - wasted effort. generic_file_buffered_write handles one segment of the vector at a time as it has to pre-fault in each segment to avoid deadlocks. When writing from kernel-space (and nfsd does) this is not an issue, so generic_file_buffered_write does not need to break and iovec from nfsd into little pieces. This patch avoids the splitting when get_fs is KERNEL_DS as it is from NFSd. This issue was introduced by commit 6527c2bdAcked-by:
Nick Piggin <nickpiggin@yahoo.com.au> Cc: Norman Weathers <norman.r.weathers@conocophillips.com> Cc: Vladimir V. Saveliev <vs@namesys.com> Signed-off-by:
Neil Brown <neilb@suse.de> Signed-off-by:
-
J. Bruce Fields authored
When setting an ACL that lacks inheritable ACEs on a directory, we should set a default ACL of zero length, not a default ACL with all bits denied. Signed-off-by:
"J. Bruce Fields" <bfields@citi.umich.edu> Signed-off-by:
-
J. Bruce Fields authored
We're inserting deny's between some ACEs in order to enforce posix draft acl semantics which prevent permissions from accumulating across entries in an acl. That's fine, but we're doing that by inserting a deny after *every* allow, which is overkill. We shouldn't be adding them in places where they actually make no difference. Also replaced some helper functions for creating acl entries; I prefer just assigning directly to the struct fields--it takes a few more lines, but the field names provide some documentation that I think makes the result easier understand. Signed-off-by:
-
J. Bruce Fields authored
Return just the effective permissions, and forget about the mask. It isn't worth the complexity. WARNING: This breaks backwards compatibility with overly-picky nfsv4->posix acl translation, as may has been included in some patched versions of libacl. To our knowledge no such version was every distributed by anyone outside citi. Signed-off-by:
-
J. Bruce Fields authored
We should be returning ATTRNOTSUPP, not NOTSUPP, when acls are unsupported. Also fix a comment. Signed-off-by:
-
J. Bruce Fields authored
The wrong pointer is being kfree'd in savemem() when defer_free returns with an error. Signed-off-by:
Benny Halevy <bhalevy@panasas.com> Signed-off-by:
-
J. Bruce Fields authored
Simplify the memory management and code a bit by representing acls with an array instead of a linked list. Signed-off-by:
-
J. Bruce Fields authored
The code that splits an incoming nfsv4 ACL into inheritable and effective parts can be combined with the the code that translates each to a posix acl, resulting in simpler code that requires one less pass through the ACL. Signed-off-by:
-
J. Bruce Fields authored
The rfc allows us to be more permissive about the ACL inheritance bits we accept: "If the server supports a single "inherit ACE" flag that applies to both files and directories, the server may reject the request (i.e., requiring the client to set both the file and directory inheritance flags). The server may also accept the request and silently turn on the ACE4_DIRECTORY_INHERIT_ACE flag." Let's take the latter option--the ACL is a complex attribute that could be rejected for a wide variety of reasons, and the protocol gives us little ability to explain the reason for the rejection, so erroring out is a user-unfriendly last resort. Signed-off-by:
-
J. Bruce Fields authored
The server name is expected to be a null-terminated string, so we can't pass in the raw client identifier. What's more, the client identifier is just a binary, not necessarily printable, blob. Let's just use the ip address instead. The server name appears to exist just to help debugging by making some printk's more informative. Note that the string is copies into the rpc client structure, so the pointer to the local variable does not outlive the function call. Signed-off-by:
-
Jan Beulich authored
Use mask_ack_irq() where possible. Signed-off-by:
Jan Beulich <jbeulich@novell.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Randy Dunlap authored
Fix kernel-doc warnings in IRQ management. Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Ingo Molnar authored
Now that disable_irq() defaults to delayed-disable semantics, the IRQ_DISABLED flag is not needed anymore. Signed-off-by:
Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Ingo Molnar authored
Never mask interrupts immediately upon request. Disabling interrupts in high-performance codepaths is rare, and on the other hand this change could recover lost edges (or even other types of lost interrupts) by conservatively only masking interrupts after they happen. (NOTE: with this change the highlevel irq-disable code still soft-disables this IRQ line - and if such an interrupt happens then the IRQ flow handler keeps the IRQ masked.) Mark i8529A controllers as 'never loses an edge'. Signed-off-by:
-
Paul E. McKenney authored
Use RCU to avoid the need to acquire tasklist_lock in the single-threaded case of clock_gettime(). It still acquires tasklist_lock when for a (potentially multithreaded) process. This change allows realtime applications to frequently monitor CPU consumption of individual tasks, as requested (and now deployed) by some off-list users. This has been in Ingo Molnar's -rt patchset since late 2005 with no problems reported, and tests successfully on 2.6.20-rc6, so I believe that it is long-since ready for mainline adoption. [paulmck@linux.vnet.ibm.com: fix exit()/posix_cpu_clock_get() race spotted by Oleg] Signed-off-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by:
-
john stultz authored
Cleanup and re-enable vsyscall gettimeofday using the generic clocksource infrastructure. [akpm@osdl.org: cleanup] Signed-off-by:
John Stultz <johnstul@us.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andi Kleen <ak@muc.de> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by:
-
john stultz authored
This patch converts x86_64 to use the GENERIC_TIME infrastructure and adds clocksource structures for both TSC and HPET (ACPI PM is shared w/ i386). [akpm@osdl.org: fix printk timestamps] [akpm@osdl.org: fix printk ckeanups] [akpm@osdl.org: hpet build fix] Signed-off-by:
-
john stultz authored
In preparation for the x86_64 generic time conversion, this patch splits out TSC and HPET related code from arch/x86_64/kernel/time.c into respective hpet.c and tsc.c files. [akpm@osdl.org: fix printk timestamps] [akpm@osdl.org: cleanup] Signed-off-by:
-
john stultz authored
In preparation for supporting generic timekeeping, this patch cleans up x86-64's use of vxtime.hpet_address, changing it to just hpet_address as is also used in i386. This is necessary since the vxtime structure will be going away. Signed-off-by:
-
john stultz authored
Provides generic infrastructure for vsyscall-gtod. [akpm@osdl.org: cleanup] Signed-off-by:
-
Ingo Molnar authored
Add SysRq-Q to print pending timers and other timer info. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: john stultz <johnstul@us.ibm.com> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by:
-
Ingo Molnar authored
add /proc/timer_list, which prints all currently pending (high-res) timers, all clock-event sources and their parameters in a human-readable form. Sample output: Timer List Version: v0.1 HRTIMER_MAX_CLOCK_BASES: 2 now at 4246046273872 nsecs cpu: 0 clock 0: .index: 0 .resolution: 1 nsecs .get_time: ktime_get_real .offset: 1273998312645738432 nsecs active timers: clock 1: .index: 1 .resolution: 1 nsecs .get_time: ktime_get .offset: 0 nsecs active timers: #0: <f5a90ec8>, hrtimer_sched_tick, hrtimer_stop_sched_tick, swapper/0 # expires at 4246432689566 nsecs [in 386415694 nsecs] #1: <f5a90ec8>, hrtimer_wakeup, do_nanosleep, pcscd/2050 # expires at 4247018194689 nsecs [in 971920817 nsecs] #2: <f5a90ec8>, hrtimer_wakeup, do_nanosleep, irqbalance/1909 # expires at 4247351358392 nsecs [in 1305084520 nsecs] #3: <f5a90ec8>, hrtimer_wakeup, do_nanosleep, crond/2157 # expires at 4249097614968 nsecs [in 3051341096 nsecs] #4: <f5a90ec8>, it_real_fn, do_setitimer, syslogd/1888 # expires at 4251329900926 nsecs [in 5283627054 nsecs] .expires_next : 4246432689566 nsecs .hres_active : 1 .check_clocks : 0 .nr_events : 31306 .idle_tick : 4246020791890 nsecs .tick_stopped : 1 .idle_jiffies : 986504 .idle_calls : 40700 .idle_sleeps : 36014 .idle_entrytime : 4246019418883 nsecs .idle_sleeptime : 4178181972709 nsecs cpu: 1 clock 0: .index: 0 .resolution: 1 nsecs .get_time: ktime_get_real .offset: 1273998312645738432 nsecs active timers: clock 1: .index: 1 .resolution: 1 nsecs .get_time: ktime_get .offset: 0 nsecs active timers: #0: <f5a90ec8>, hrtimer_sched_tick, hrtimer_restart_sched_tick, swapper/0 # expires at 4246050084568 nsecs [in 3810696 nsecs] #1: <f5a90ec8>, hrtimer_wakeup, do_nanosleep, atd/2227 # expires at 4261010635003 nsecs [in 14964361131 nsecs] #2: <f5a90ec8>, hrtimer_wakeup, do_nanosleep, smartd/2332 # expires at 5469485798970 nsecs [in 1223439525098 nsecs] .expires_next : 4246050084568 nsecs .hres_active : 1 .check_clocks : 0 .nr_events : 24043 .idle_tick : 4246046084568 nsecs .tick_stopped : 0 .idle_jiffies : 986510 .idle_calls : 26360 .idle_sleeps : 22551 .idle_entrytime : 4246043874339 nsecs .idle_sleeptime : 4170763761184 nsecs tick_broadcast_mask: 00000003 event_broadcast_mask: 00000001 CPU#0's local event device: Clock Event Device: lapic capabilities: 0000000e max_delta_ns: 807385544 min_delta_ns: 1443 mult: 44624025 shift: 32 set_next_event: lapic_next_event set_mode: lapic_timer_setup event_handler: hrtimer_interrupt .installed: 1 .expires: 4246432689566 nsecs CPU#1's local event device: Clock Event Device: lapic capabilities: 0000000e max_delta_ns: 807385544 min_delta_ns: 1443 mult: 44624025 shift: 32 set_next_event: lapic_next_event set_mode: lapic_timer_setup event_handler: hrtimer_interrupt .installed: 1 .expires: 4246050084568 nsecs Clock Event Device: hpet capabilities: 00000007 max_delta_ns: 2147483647 min_delta_ns: 3352 mult: 61496110 shift: 32 set_next_event: hpet_next_event set_mode: hpet_set_mode event_handler: handle_nextevt_broadcast Signed-off-by:
-
Ingo Molnar authored
Add /proc/timer_stats support: debugging feature to profile timer expiration. Both the starting site, process/PID and the expiration function is captured. This allows the quick identification of timer event sources in a system. Sample output: # echo 1 > /proc/timer_stats # cat /proc/timer_stats Timer Stats Version: v0.1 Sample period: 4.010 s 24, 0 swapper hrtimer_stop_sched_tick (hrtimer_sched_tick) 11, 0 swapper sk_reset_timer (tcp_delack_timer) 6, 0 swapper hrtimer_stop_sched_tick (hrtimer_sched_tick) 2, 1 swapper queue_delayed_work_on (delayed_work_timer_fn) 17, 0 swapper hrtimer_restart_sched_tick (hrtimer_sched_tick) 2, 1 swapper queue_delayed_work_on (delayed_work_timer_fn) 4, 2050 pcscd do_nanosleep (hrtimer_wakeup) 5, 4179 sshd sk_reset_timer (tcp_write_timer) 4, 2248 yum-updatesd schedule_timeout (process_timeout) 18, 0 swapper hrtimer_restart_sched_tick (hrtimer_sched_tick) 3, 0 swapper sk_reset_timer (tcp_delack_timer) 1, 1 swapper neigh_table_init_no_netlink (neigh_periodic_timer) 2, 1 swapper e1000_up (e1000_watchdog) 1, 1 init schedule_timeout (process_timeout) 100 total events, 25.24 events/sec [ cleanups and hrtimers support from Thomas Gleixner <tglx@linutronix.de> ] [bunk@stusta.de: nr_entries can become static] Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Thomas Gleixner authored
Fix potential setitimer DoS with high-res timers by pushing itimer rearm processing to process context. [Fixes from: Ingo Molnar <mingo@elte.hu>] Signed-off-by:
-
Thomas Gleixner authored
Implement high resolution timers on top of the hrtimers infrastructure and the clockevents / tick-management framework. This provides accurate timers for all hrtimer subsystem users. Signed-off-by:
-
Ingo Molnar authored
Enable dynamic ticks selection. Signed-off-by:
-
Thomas Gleixner authored
The NMI watchdog implementation assumes that the local APIC timer interrupt is happening. This assumption is not longer true when high resolution timers and dynamic ticks come into play, as they may switch off the local APIC timer completely. Take the PIT/HPET interrupts into account too, to avoid false positives. Signed-off-by:
-
Ingo Molnar authored
Prepare i386 for dyntick: idle handler callbacks. Signed-off-by:
-
Thomas Gleixner authored
The local apic timer calibration has two problem cases: 1. The calibration is based on readout of the PIT/HPET timer to detect the wrap of the periodic tick. It happens that a box gets stuck in the calibration loop due to a PIT with a broken readout function. 2. CoreDuo boxen show a sporadic PIT runs too slow defect, which results in a wrong lapic calibration. The PIT goes back to normal operation once the lapic timer is switched to periodic mode. Both are existing and unfixed problems in the current upstream kernel and prevent certain laptops and other systems from booting Linux. Rework the code to address both problems: - Make the calibration interrupt driven. This removes the wait_timer_tick magic hackery from lapic.c and time_hpet.c. The clockevents framework allows easy substitution of the global tick event handler for the calibration. This is more accurate than monitoring jiffies. At this point of the boot process, nothing disturbes the interrupt delivery, so the results are very accurate. - Verify the calibration against the PM timer, when available by using the early access function. When the measured calibration period is outside of an one percent window, then the lapic timer calibration is adjusted to the pm timer result. - Verify the calibration by running the lapic timer with the calibration handler. Disable lapic timer in case of deviation. This also removes the "synchronization" of the local apic timer to the global tick. This synchronization never worked, as there is no way to synchronize PIT(HPET) and local APIC timer. The synchronization by waiting for the tick just alignes the local APIC timer for the first events, but later the events drift away due to the different clocks. Removing the "sync" is just randomizing the asynchronous behaviour at setup time. Signed-off-by:
-
Thomas Gleixner authored
Add clockevent drivers for i386: lapic (local) and PIT/HPET (global). Update the timer IRQ to call into the PIT/HPET driver's event handler and the lapic-timer IRQ to call into the lapic clockevent driver. The assignement of timer functionality is delegated to the core framework code and replaces the compile and runtime evalution in do_timer_interrupt_hook() Use the clockevents broadcast support and implement the lapic_broadcast function for ACPI. No changes to existing functionality. [ kdump fix from Vivek Goyal <vgoyal@in.ibm.com> ] [ fixes based on review feedback from Arjan van de Ven <arjan@infradead.org> ] Cleanups-from: Adrian Bunk <bunk@stusta.de> Build-fixes-from: Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Thomas Gleixner authored
With Ingo Molnar <mingo@elte.hu> Add functions to provide dynamic ticks and high resolution timers. The code which keeps track of jiffies and handles the long idle periods is shared between tick based and high resolution timer based dynticks. The dyntick functionality can be disabled on the kernel commandline. Provide also the infrastructure to support high resolution timers. Signed-off-by:
-
Thomas Gleixner authored
With Ingo Molnar <mingo@elte.hu> Add broadcast functionality, so per cpu clock event devices can be registered as dummy devices or switched from/to broadcast on demand. The broadcast function distributes the events via the broadcast function of the clock event device. This is primarily designed to replace the switch apic timer to / from IPI in power states, where the apic stops. Signed-off-by:
-
