- 21 Jul, 2011 1 commit
-
-
David G Turner authored
Add support for Roland/BOSS BR-800 (0582:011e) to snd-usb-audio driver. This allows playback and recording, which has been tested and found to work. The third interface should be MIDI (MTC/SMPTE?) for DAW interface and is set as per ME-25, but this has not been tested. SDHC card access is already supported by usb-storage for Backup/Rhythm Editor/Wave Convertor mode which should not conflict with this. Signed-off-by:
David G Turner <dgturner@iee.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
- 18 Jul, 2011 1 commit
-
-
Clemens Ladisch authored
Commit dd203fa9 (ALSA: virtuoso: remove non-working controls on Essence ST Deluxe) made it impossible to adjust the volume after the driver initialized it to muted. Ensure that those DACs that can be accessed with I2C are initialized to the same volume that is the reset default of the DAC without I2C. Signed-off-by:
Clemens Ladisch <clemens@ladisch.de> Cc: 2.6.38+ <stable@kernel.org>
-
- 15 Jul, 2011 1 commit
-
-
Daniel T Chen authored
BugLink: https://bugs.launchpad.net/bugs/774895 The original reporter states that his volume keys do not change the desired Master and PCM mixer elements together, so apply the hp+mute led quirk for his PCI SSID. Reported-by: Jeffrey Finkelstein Signed-off-by:
Daniel T Chen <crimsun@ubuntu.com> Signed-off-by:
-
- 14 Jul, 2011 1 commit
-
-
Takashi Iwai authored
It was obviously wrong, grr.... Signed-off-by:
-
- 12 Jul, 2011 2 commits
-
-
Guillaume Pellerin authored
This patch gives M-Audio Fast Track Pro and M-Audio Quattro quirks and endpoints to boot and setup those devices with special options (digital inputs and outputs, 24 bits mode, etc...). M-Audio Audiophile quirks are just adapted to match the new global M-Audio parameters. Special configurations can be then loaded through a modprobe conf file. For example, to set the 24 bits mode on the Fast Track Pro add /etc/modprobe.d/fast_track_pro.conf : options snd_usb_audio vid=0x763 pid=0x2012 device_setup=0x08 Here is a list of the possibilities in this example : http://files.parisson.com/debian/fast-track-pro.confSigned-off-by:Guillaume Pellerin <yomguy@parisson.com> Signed-off-by:
-
Takashi Iwai authored
Signed-off-by:
-
- 08 Jul, 2011 2 commits
-
-
Takashi Iwai authored
The drivers don't require the exclusive irqs. Let's fix the deprecated warnings. Signed-off-by: -
Pavel Roskin authored
Signed-off-by:
Pavel Roskin <proski@gnu.org> Signed-off-by:
-
- 25 Jun, 2011 1 commit
-
-
Tim Blechmann authored
each device has a unique mac address, which can be used to distinguish multiple devices in the same machine. we therefore include the full mac address in the device shortname and the last 6 bytes in the device id. Signed-off-by:
Tim Blechmann <tim@klingt.org> Signed-off-by:
-
- 24 Jun, 2011 1 commit
-
-
Markus Bollinger authored
- add/fix comments and debug messages - fix incomplete matrix init - comment out creation of buggy lola_dest_gain_mixer controls - minor optimisations Signed-off-by:
Markus Bollinger <bollinger@digigram.com> Signed-off-by:
-
- 17 Jun, 2011 4 commits
-
-
Takashi Iwai authored
-
Takashi Iwai authored
The via driver spews warnigs like hda-codec: no NID for mapping control Independent HP:0:0 with some codecs because snd_hda_add_nid() is called with nid=0. This patch fixes it by skipping the call when no corresponding widget is found. Signed-off-by: -
Clemens Ladisch authored
Since commit 13882a82 (optimize iso queueing by setting wake only after the last packet), drivers are required to call fw_iso_context_queue_flush() after queueing a batch of packets. The missing call would have an effect only if the controller queue underruns, but then the DMA would stop completely. Signed-off-by:
-
Clemens Ladisch authored
Since commit f2b3614c (Don't check DMA time-out too shortly), drivers need no longer restrict their PCM period length to be shorter than 10 seconds. Signed-off-by:
-
- 16 Jun, 2011 2 commits
-
-
Torsten Schenk authored
Fixed remaining issues of the signedness bug discovered by Dan Carpenter. A check was remaining that tests if unsigned rt->rate is >= 0. Changed that so that rt->rate now consistently uses ARRAY_SIZE(rates) as invalid rate value and not -1. Signed-off-by:
Torsten Schenk <torsten.schenk@zoho.com> Signed-off-by:
-
Harry Butterworth authored
This is a reworked patch from Creative to change the PLL code to address unreliable 44100Hz initialization. Signed-off-by:
Harry Butterworth <heb1001@gmail.com> Signed-off-by:
-
- 15 Jun, 2011 1 commit
-
-
Takashi Iwai authored
Add missing __devinit. Signed-off-by:
-
- 14 Jun, 2011 8 commits
-
-
Takashi Iwai authored
Kill tasklet usage in rawmidi core code. Use workq for the event callback instead of tasklet (which is used only in core/seq/seq_midi.c). Signed-off-by: -
Takashi Iwai authored
Instead of tasklet, use workq for handling the hw-volume control. This reduces lots of spinlocks. Signed-off-by: -
Takashi Iwai authored
-
Takashi Iwai authored
Signed-off-by: -
Takashi Iwai authored
The commit 2308f4ad missed static inline thus it resulted in multiple-definitions error at linking. Signed-off-by:
-
Harry Butterworth authored
ALSA: ctxfi: Implement a combined capabilities query method to replace multiple have_x query methods. Signed-off-by:
-
Harry Butterworth authored
Initialise model-specific DAC and ADC parts. Add controls for output and mic source selection. Rename some mixer controls according to ControlNames.txt. Remove Playback switches for Line-in and IEC958-in - these were controlling the input mute/unmute which affected capture too. Use the capture switches to control the input mute/unmute instead - it's less confusing. Initialise the WM8775 to invert the left-right clock to swap the left and right channels of the mic and aux input. Signed-off-by:
-
Jesper Juhl authored
We have a double-free bug in sound/usb/6fire/firmware.c::usb6fire_fw_ezusb_upload(). We already call release_firmware(fw) on line 258, so when we then do it again after usb6fire_fw_ezusb_write() returns <0, we have a double-free. Easily fixed by just removing the last call to release_firmware(). Signed-off-by:
Jesper Juhl <jj@chaosbits.net> Signed-off-by:
-
- 13 Jun, 2011 2 commits
-
-
Joe Perches authored
Using static inline functions can reduce compilation messages and macro misuse. sound/pci/hda/patch_conexant.c: In function ‘patch_cxt5045’: sound/pci/hda/patch_conexant.c:1232:3: warning: statement with no effect Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Takashi Iwai authored
The auto-mute setup for Acer Aspire-one with ALC268 was set wrongly during the clean-up of auto-mute function. Fixed now. Tested-by:
Borislav Petkov <bp@alien8.de> Signed-off-by:
-
- 12 Jun, 2011 4 commits
-
-
Florian Zeitz authored
This patch adds the necessary details to support the PCIe version of E-MU's 0404 card. From comparing the PCBs it seems the PCIe version just added a PCIe chipset and left all other components pretty much in place. For anyone intrigued to take a look at the PCB there are pictures I took at <http://babelmonkeys.de/~florob/E-MU%200404/>. Signed-off-by:
Florian Zeitz <florob@babelmonkeys.de> Signed-off-by:
-
Adrian Knoth authored
The PCI version of the RME HDSP MADI card uses 0xcf as revision ID. Just add this to the list of supported cards. Signed-off-by:
Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by:
-
Adrian Knoth authored
When using Word Clock on RME MADI cards, AutoSync mode was alternating betweeen MADI and WC due to a typo: AutoSync is indicated in the second status register (status2), not the first one (status). While the proc output was always correct, the reported WC frequency to ALSA was unstable as mentioned in http://mailman.alsa-project.org/pipermail/alsa-devel/2008-March/006723.htmlSigned-off-by:
-
Adrian Knoth authored
For the MIDI part, we need to acquire (and release) the hmidi->lock, access to the global hdspm structure is serialized through hmidi->hdspm->lock instead. Signed-off-by:
-
- 10 Jun, 2011 8 commits
-
-
Takashi Iwai authored
-
Takashi Iwai authored
The name argument of request_irq() appears in /proc/interrupts, and it's quite ugly when the name entry contains a space or special letters. In general, it's simpler and more readable when the module name appears there, so let's replace all entries with KBUILD_MODNAME. Signed-off-by: -
Daniel T Chen authored
BugLink: https://launchpad.net/bugs/761171 The original reporter needs the model=auto quirk for his internal speakers to be audible in the latest daily snapshot, so add an entry in the quirk table for his PCI SSID. A trivially different version of this patch using the model=asus quirk should be applied to the 2.6.38 and 2.6.39 stable kernels. We don't use the asus quirk in 3.0-rc2, because 3.0-rc2's autoparser is much improved. Reported-and-tested-by: tomdeering7 Signed-off-by:
-
Takashi Iwai authored
The convention for pci_driver.name entry in kernel drivers seem to be the module name or equivalent ones. But, so far, almost all PCI sound drivers use more verbose name like "ABC Xyz (12)", and these are fairly confusing when appearing as a file name. This patch converts the all pci_driver.name entries in sound/pci/* to use KBUILD_MODNAME for more unified appearance. Signed-off-by: -
Takashi Iwai authored
Clean up snd_printk() helper using the %pV prefix for recursive printks. This also automagically fixes an Oops with RO/NX-enabled modules. Tested-by:
Maarten Lankhorst <m.b.lankhorst@gmail.com> Signed-off-by:
-
Takashi Iwai authored
Some Reatlek model quirks use master_mute bool switch for controlling the master-mute of outputs. For these cases, the initialization of HP pins/amps were forgotten during the transition to the common automute helper function in 3.0 development time, and resulted in the muted HP output as default. This patch fixes the issue by adjusting the HP output explicitly with master_mute switch. Tested-by:
Michal Hocko <mhocko@suse.cz> Signed-off-by:
-
Takashi Iwai authored
The tag number was forgotten to be fixed after cleaning up the model quirks for ALC262 fujitsu and lenovo-3000 models. Tested-by:
-
Sangbeom Kim authored
If DMA active status should be checked, I2SCON register should be referenced. In this patch, Fix the incorrect referencing of I2SCON register. Reported-by : Lakkyung Jung <lakkyung.jung@samsung.com> Signed-off-by:
Sangbeom Kim <sbkim73@samsung.com> Acked-by:
Jassi Brar <jassisinghbrar@gmail.com> Acked-by:
Liam Girdwood <lrg@ti.com> Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
-
- 09 Jun, 2011 1 commit
-
-
Lars-Peter Clausen authored
Currently it is possible that snd_soc_new_{mixer,mux,pga} is called with a DAPM context not matching the widgets context. This can lead to a wrong prefix_len calculation, which will result in undefined behaviour. To avoid this always use the DAPM context from the widget itself. Signed-off-by:Lars-Peter Clausen <lars@metafoo.de> Acked-by:
-
