Pull x86 timer updates from Ingo Molnar:
 "This tree includes a HPET overhead micro-optimization plus new TSC
  frequencies for newer Intel CPUs"

* 'x86-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/tsc: Add additional Intel CPU models to the crystal quirk list
  x86/tsc: Use cpu id defines instead of hex constants
  x86/hpet: Reduce HPET counter read contention

Pull x86 platform changes from Ingo Molnar:
 "The main changes in this cycle were:

   - SGI UV updates (Andrew Banman)

   - Intel MID updates (Andy Shevchenko)

   - Initial Mellanox systems platform (Vadim Pasternak)"

* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/platform/mellanox: Fix return value check in mlxplat_init()
  x86/platform/mellanox: Introduce support for Mellanox systems platform
  x86/platform/uv/BAU: Add UV4-specific functions
  x86/platform/uv/BAU: Fix payload queue setup on UV4 hardware
  x86/platform/uv/BAU: Disable software timeout on UV4 hardware
  x86/platform/uv/BAU: Populate ->uvhub_version with UV4 version information
  x86/platform/uv/BAU: Use generic function pointers
  x86/platform/uv/BAU: Add generic function pointers
  x86/platform/uv/BAU: Convert uv_physnodeaddr() use to uv_gpa_to_offset()
  x86/platform/uv/BAU: Clean up pq_init()
  x86/platform/uv/BAU: Clean up and update printks
  x86/platform/uv/BAU: Clean up vertical alignment
  x86/platform/intel-mid: Keep SRAM powered on at boot
  x86/platform/intel-mid: Add Intel Penwell to ID table
  x86/cpu: Rename Merrifield2 to Moorefield
  x86/platform/intel-mid: Implement power off sequence
  x86/platform/intel-mid: Enable SD card detection on Merrifield
  x86/platform/intel-mid: Enable WiFi on Intel Edison
  x86/platform/intel-mid: Run PWRMU command immediately

Pull x86 cleanups from Ingo Molnar:
 "Header file and a wrapper functions cleanup"

* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Migrate exception table users off module.h and onto extable.h
  x86: Clean up various simple wrapper functions

Pull x86 boot updates from Ingo Molnar:
 "The changes in this cycle were:

   - Save e820 table RAM footprint on larger kernel configurations.
     (Denys Vlasenko)

   - pmem related fixes (Dan Williams)

   - theoretical e820 boundary condition fix (Wei Yang)"

* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/boot: Fix kdump, cleanup aborted E820_PRAM max_pfn manipulation
  x86/e820: Use much less memory for e820/e820_saved, save up to 120k
  x86/e820: Prepare e280 code for switch to dynamic storage
  x86/e820: Mark some static functions __init
  x86/e820: Fix very large 'size' handling boundary condition

Pull low-level x86 updates from Ingo Molnar:
 "In this cycle this topic tree has become one of those 'super topics'
  that accumulated a lot of changes:

   - Add CONFIG_VMAP_STACK=y support to the core kernel and enable it on
     x86 - preceded by an array of changes. v4.8 saw preparatory changes
     in this area already - this is the rest of the work. Includes the
     thread stack caching performance optimization. (Andy Lutomirski)

   - switch_to() cleanups and all around enhancements. (Brian Gerst)

   - A large number of dumpstack infrastructure enhancements and an
     unwinder abstraction. The secret long term plan is safe(r) live
     patching plus maybe another attempt at debuginfo based unwinding -
     but all these current bits are standalone enhancements in a frame
     pointer based debug environment as well. (Josh Poimboeuf)

   - More __ro_after_init and const annotations. (Kees Cook)

   - Enable KASLR for the vmemmap memory region. (Thomas Garnier)"

[ The virtually mapped stack changes are pretty fundamental, and not
  x86-specific per se, even if they are only used on x86 right now. ]

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits)
  x86/asm: Get rid of __read_cr4_safe()
  thread_info: Use unsigned long for flags
  x86/alternatives: Add stack frame dependency to alternative_call_2()
  x86/dumpstack: Fix show_stack() task pointer regression
  x86/dumpstack: Remove dump_trace() and related callbacks
  x86/dumpstack: Convert show_trace_log_lvl() to use the new unwinder
  oprofile/x86: Convert x86_backtrace() to use the new unwinder
  x86/stacktrace: Convert save_stack_trace_*() to use the new unwinder
  perf/x86: Convert perf_callchain_kernel() to use the new unwinder
  x86/unwind: Add new unwind interface and implementations
  x86/dumpstack: Remove NULL task pointer convention
  fork: Optimize task creation by caching two thread stacks per CPU if CONFIG_VMAP_STACK=y
  sched/core: Free the stack early if CONFIG_THREAD_INFO_IN_TASK
  lib/syscall: Pin the task stack in collect_syscall()
  x86/process: Pin the target stack in get_wchan()
  x86/dumpstack: Pin the target stack when dumping it
  kthread: Pin the stack via try_get_task_stack()/put_task_stack() in to_live_kthread() function
  sched/core: Add try_get_task_stack() and put_task_stack()
  x86/entry/64: Fix a minor comment rebase error
  iommu/amd: Don't put completion-wait semaphore on stack
  ...

Pull x86 apic updates from Ingo Molnar:
 "The main changes are:

   - Persistent CPU/node numbering across CPU hotplug/unplug events.
     This is a pretty involved series of changes that first fetches all
     the information during bootup and then uses it for the various
     hotplug/unplug methods. (Gu Zheng, Dou Liyang)

   - IO-APIC hot-add/remove fixes and enhancements. (Rui Wang)

   - ... various fixes, cleanups and enhancements"

* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
  x86/apic: Fix silent & fatal merge conflict in __generic_processor_info()
  acpi: Fix broken error check in map_processor()
  acpi: Validate processor id when mapping the processor
  acpi: Provide mechanism to validate processors in the ACPI tables
  x86/acpi: Set persistent cpuid <-> nodeid mapping when booting
  x86/acpi: Enable MADT APIs to return disabled apicids
  x86/acpi: Introduce persistent storage for cpuid <-> apicid mapping
  x86/acpi: Enable acpi to register all possible cpus at boot time
  x86/numa: Online memory-less nodes at boot time
  x86/apic: Get rid of apic_version[] array
  x86/apic: Order irq_enter/exit() calls correctly vs. ack_APIC_irq()
  x86/ioapic: Ignore root bridges without a companion ACPI device
  x86/apic: Update comment about disabling processor focus
  x86/smpboot: Check APIC ID before setting up default routing
  x86/ioapic: Fix IOAPIC failing to request resource
  x86/ioapic: Fix lost IOAPIC resource after hot-removal and hotadd
  x86/ioapic: Fix setup_res() failing to get resource
  x86/ioapic: Support hot-removal of IOAPICs present during boot
  x86/ioapic: Change prototype of acpi_ioapic_add()
  x86/apic, ACPI: Fix incorrect assignment when handling apic/x2apic entries
  ...

Pull scheduler changes from Ingo Molnar:
 "The main changes are:

   - irqtime accounting cleanups and enhancements. (Frederic Weisbecker)

   - schedstat debugging enhancements, make it more broadly runtime
     available. (Josh Poimboeuf)

   - More work on asymmetric topology/capacity scheduling. (Morten
     Rasmussen)

   - sched/wait fixes and cleanups. (Oleg Nesterov)

   - PELT (per entity load tracking) improvements. (Peter Zijlstra)

   - Rewrite and enhance select_idle_siblings(). (Peter Zijlstra)

   - sched/numa enhancements/fixes (Rik van Riel)

   - sched/cputime scalability improvements (Stanislaw Gruszka)

   - Load calculation arithmetics fixes. (Dietmar Eggemann)

   - sched/deadline enhancements (Tommaso Cucinotta)

   - Fix utilization accounting when switching to the SCHED_NORMAL
     policy. (Vincent Guittot)

   - ... plus misc cleanups and enhancements"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (64 commits)
  sched/irqtime: Consolidate irqtime flushing code
  sched/irqtime: Consolidate accounting synchronization with u64_stats API
  u64_stats: Introduce IRQs disabled helpers
  sched/irqtime: Remove needless IRQs disablement on kcpustat update
  sched/irqtime: No need for preempt-safe accessors
  sched/fair: Fix min_vruntime tracking
  sched/debug: Add SCHED_WARN_ON()
  sched/core: Fix set_user_nice()
  sched/fair: Introduce set_curr_task() helper
  sched/core, ia64: Rename set_curr_task()
  sched/core: Fix incorrect utilization accounting when switching to fair class
  sched/core: Optimize SCHED_SMT
  sched/core: Rewrite and improve select_idle_siblings()
  sched/core: Replace sd_busy/nr_busy_cpus with sched_domain_shared
  sched/core: Introduce 'struct sched_domain_shared'
  sched/core: Restructure destroy_sched_domain()
  sched/core: Remove unused @cpu argument from destroy_sched_domain*()
  sched/wait: Introduce init_wait_entry()
  sched/wait: Avoid abort_exclusive_wait() in __wait_on_bit_lock()
  sched/wait: Avoid abort_exclusive_wait() in ___wait_event()
  ...

Pull RAS updates from Ingo Molnar:
 "The main changes were:

   - Lots of enhancements for AMD SMCA (Scalable MCA
     features/extensions) systems: extract, decode and print more
     hardware error information and add matching support on the
     injection/testing side as well. (Yazn Ghannam)

   - Various MCE handling improvements on modern Intel Xeons. (Tony
     Luck)

   - Plus misc fixes and enhancements"

* 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
  x86/RAS/mce_amd_inj: Remove debugfs dir recursively on exit
  x86/RAS/mce_amd_inj: Fix signed wrap around when decrementing index 'i'
  x86/RAS/mce_amd_inj: Fix some W= warnings
  x86/MCE/AMD, EDAC: Handle reserved bank 4 on Fam17h properly
  x86/mce/AMD: Extract the error address on SMCA systems
  x86/mce, EDAC/mce_amd: Print MCA_SYND and MCA_IPID during MCE on SMCA systems
  x86/mce/AMD: Save MCA_IPID in MCE struct on SMCA systems
  x86/mce/AMD: Ensure the deferred error interrupt is of type APIC on SMCA systems
  x86/mce/AMD: Update sysfs bank names for SMCA systems
  x86/mce/AMD, EDAC/mce_amd: Define and use tables for known SMCA IP types
  EDAC/mce_amd: Use SMCA prefix for error descriptions arrays
  EDAC/mce_amd: Add missing SMCA error descriptions
  x86/mce/AMD: Read MSRs on the CPU allocating the threshold blocks
  x86/RAS: Add syndrome support to mce_amd_inj
  EDAC/mce_amd: Print syndrome register value on SMCA systems
  x86/mce: Add support for new MCA_SYND register
  x86/mce/AMD: Use msr_ops.misc() in allocate_threshold_blocks()
  x86/mce: Drop X86_FEATURE_MCE_RECOVERY and the related model string test
  x86/mce: Improve memcpy_mcsafe()
  x86/mce: Add PCI quirks to identify Xeons with machine check recovery
  ...

Pull perf updates from Ingo Molnar:
 "The main kernel side changes were:

   - uprobes enhancements (Masami Hiramatsu)

   - Uncore group events enhancements (David Carrillo-Cisneros)

   - x86 Intel: Add support for Skylake server uncore PMUs (Kan Liang)

   - x86 Intel: LBR cleanups and enhancements, for better branch
     annotation tracking (Peter Zijlstra)

   - x86 Intel: Add support for PTWRITE and power event tracing
     (Alexander Shishkin)

   - ... various fixes, cleanups and smaller enhancements.

  Lots of tooling changes - a couple of highlights:

   - Support event group view with hierarchy mode in 'perf top' and
     'perf report' (Namhyung Kim)

     e.g.:

     $ perf record -e '{cycles,instructions}' make
     $ perf report --hierarchy --stdio
     ...
     #   Overhead  Command / Shared Object / Symbol
     # ......................  ..................................
     ...
     25.74%  27.18%sh
     19.96%  24.14%libc-2.24.so
      9.55%  14.64%[.] __strcmp_sse2
      1.54%   0.00%[.] __tfind
      1.07%   1.13%[.] _int_malloc
      0.95%   0.00%[.] __strchr_sse2
      0.89%   1.39%[.] __tsearch
      0.76%   0.00%[.] strlen

   - Add branch stack / basic block info to 'perf annotate --stdio',
     where for each branch, we add an asm comment after the instruction
     with information on how often it was taken and predicted. See
     example with color output at:

       http://vger.kernel.org/~acme/perf/annotate_basic_blocks.png

     (Peter Zijlstra)

   - Add support for using symbols in address filters with Intel PT and
     ARM CoreSight (hardware assisted tracing facilities) (Adrian
     Hunter, Mathieu Poirier)

   - Add support for interacting with Coresight PMU ETMs/PTMs, that are
     IP blocks to perform hardware assisted tracing on a ARM CPU core
     (Mathieu Poirier)

   - Support generating cross arch probes, i.e. if you specify a vmlinux
     file for different arch than the one in the host machine,

        $ perf probe --definition function_name args

     will generate the probe definition string needed to append to the
     target machine /sys/kernel/debug/tracing/kprobes_events file, using
     scripting (Masami Hiramatsu).

   - Allow configuring the default 'perf report -s' sort order in
     ~/.perfconfig, for instance, "sym,dso" may be more fitting for
     kernel developers. (Arnaldo Carvalho de Melo)

   - ... plus lots of other changes, refactorings, features and fixes"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (149 commits)
  perf tests: Add dwarf unwind test for powerpc
  perf probe: Match linkage name with mangled name
  perf probe: Fix to cut off incompatible chars from group name
  perf probe: Skip if the function address is 0
  perf probe: Ignore the error of finding inline instance
  perf intel-pt: Fix decoding when there are address filters
  perf intel-pt: Enable decoder to handle TIP.PGD with missing IP
  perf intel-pt: Read address filter from AUXTRACE_INFO event
  perf intel-pt: Record address filter in AUXTRACE_INFO event
  perf intel-pt: Add a helper function for processing AUXTRACE_INFO
  perf intel-pt: Fix missing error codes processing auxtrace_info
  perf intel-pt: Add support for recording the max non-turbo ratio
  perf intel-pt: Fix snapshot overlap detection decoder errors
  perf probe: Increase debug level of SDT debug messages
  perf record: Add support for using symbols in address filters
  perf symbols: Add dso__last_symbol()
  perf record: Fix error paths
  perf record: Rename label 'out_symbol_exit'
  perf script: Fix vanished idle symbols
  perf evsel: Add support for address filters
  ...

Pull locking updates from Ingo Molnar:
 "The main changes in this cycle were:

   - rwsem micro-optimizations (Davidlohr Bueso)

   - Improve the implementation and optimize the performance of
     percpu-rwsems. (Peter Zijlstra.)

   - Convert all lglock users to better facilities such as percpu-rwsems
     or percpu-spinlocks and remove lglocks. (Peter Zijlstra)

   - Remove the ticket (spin)lock implementation. (Peter Zijlstra)

   - Korean translation of memory-barriers.txt and related fixes to the
     English document. (SeongJae Park)

   - misc fixes and cleanups"

* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
  x86/cmpxchg, locking/atomics: Remove superfluous definitions
  x86, locking/spinlocks: Remove ticket (spin)lock implementation
  locking/lglock: Remove lglock implementation
  stop_machine: Remove stop_cpus_lock and lg_double_lock/unlock()
  fs/locks: Use percpu_down_read_preempt_disable()
  locking/percpu-rwsem: Add down_read_preempt_disable()
  fs/locks: Replace lg_local with a per-cpu spinlock
  fs/locks: Replace lg_global with a percpu-rwsem
  locking/percpu-rwsem: Add DEFINE_STATIC_PERCPU_RWSEMand percpu_rwsem_assert_held()
  locking/pv-qspinlock: Use cmpxchg_release() in __pv_queued_spin_unlock()
  locking/rwsem, x86: Drop a bogus cc clobber
  futex: Add some more function commentry
  locking/hung_task: Show all locks
  locking/rwsem: Scan the wait_list for readers only once
  locking/rwsem: Remove a few useless comments
  locking/rwsem: Return void in __rwsem_mark_wake()
  locking, rcu, cgroup: Avoid synchronize_sched() in __cgroup_procs_write()
  locking/Documentation: Add Korean translation
  locking/Documentation: Fix a typo of example result
  locking/Documentation: Fix wrong section reference
  ...

Pull EFI updates from Ingo Molnar:
 "Main changes in this cycle were:

   - Refactor the EFI memory map code into architecture neutral files
     and allow drivers to permanently reserve EFI boot services regions
     on x86, as well as ARM/arm64. (Matt Fleming)

   - Add ARM support for the EFI ESRT driver. (Ard Biesheuvel)

   - Make the EFI runtime services and efivar API interruptible by
     swapping spinlocks for semaphores. (Sylvain Chouleur)

   - Provide the EFI identity mapping for kexec which allows kexec to
     work on SGI/UV platforms with requiring the "noefi" kernel command
     line parameter. (Alex Thorlton)

   - Add debugfs node to dump EFI page tables on arm64. (Ard Biesheuvel)

   - Merge the EFI test driver being carried out of tree until now in
     the FWTS project. (Ivan Hu)

   - Expand the list of flags for classifying EFI regions as "RAM" on
     arm64 so we align with the UEFI spec. (Ard Biesheuvel)

   - Optimise out the EFI mixed mode if it's unsupported (CONFIG_X86_32)
     or disabled (CONFIG_EFI_MIXED=n) and switch the early EFI boot
     services function table for direct calls, alleviating us from
     having to maintain the custom function table. (Lukas Wunner)

   - Miscellaneous cleanups and fixes"

* 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
  x86/efi: Round EFI memmap reservations to EFI_PAGE_SIZE
  x86/efi: Allow invocation of arbitrary boot services
  x86/efi: Optimize away setup_gop32/64 if unused
  x86/efi: Use kmalloc_array() in efi_call_phys_prolog()
  efi/arm64: Treat regions with WT/WC set but WB cleared as memory
  efi: Add efi_test driver for exporting UEFI runtime service interfaces
  x86/efi: Defer efi_esrt_init until after memblock_x86_fill
  efi/arm64: Add debugfs node to dump UEFI runtime page tables
  x86/efi: Remove unused find_bits() function
  fs/efivarfs: Fix double kfree() in error path
  x86/efi: Map in physical addresses in efi_map_region_fixed
  lib/ucs2_string: Speed up ucs2_utf8size()
  firmware-gsmi: Delete an unnecessary check before the function call "dma_pool_destroy"
  x86/efi: Initialize status to ensure garbage is not returned on small size
  efi: Replace runtime services spinlock with semaphore
  efi: Don't use spinlocks for efi vars
  efi: Use a file local lock for efivars
  efi/arm*: esrt: Add missing call to efi_esrt_init()
  efi/esrt: Use memremap not ioremap to access ESRT table in memory
  x86/efi-bgrt: Use efi_mem_reserve() to avoid copying image data
  ...

Pull core SMP updates from Ingo Molnar:
 "Two main change is generic vCPU pinning and physical CPU SMP-call
  support, for Xen to be able to perform certain calls on specific
  physical CPUs - by Juergen Gross"

* 'core-smp-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  smp: Allocate smp_call_on_cpu() workqueue on stack too
  hwmon: Use smp_call_on_cpu() for dell-smm i8k
  dcdbas: Make use of smp_call_on_cpu()
  xen: Add xen_pin_vcpu() to support calling functions on a dedicated pCPU
  smp: Add function to execute a function synchronously on a CPU
  virt, sched: Add generic vCPU pinning support
  xen: Sync xen header

Pull RCU updates from Ingo Molnar:
 "The main changes in this cycle were:

   - Expedited grace-period changes, most notably avoiding having user
     threads drive expedited grace periods, using a workqueue instead.

   - Miscellaneous fixes, including a performance fix for lists that was
     sent with the lists modifications.

   - CPU hotplug updates, most notably providing exact CPU-online
     tracking for RCU. This will in turn allow removal of the checks
     supporting RCU's prior heuristic that was based on the assumption
     that CPUs would take no longer than one jiffy to come online.

   - Torture-test updates.

   - Documentation updates"

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
  list: Expand list_first_entry_or_null()
  torture: TOROUT_STRING(): Insert a space between flag and message
  rcuperf: Consistently insert space between flag and message
  rcutorture: Print out barrier error as document says
  torture: Add task state to writer-task stall printk()s
  torture: Convert torture_shutdown() to hrtimer
  rcutorture: Convert to hotplug state machine
  cpu/hotplug: Get rid of CPU_STARTING reference
  rcu: Provide exact CPU-online tracking for RCU
  rcu: Avoid redundant quiescent-state chasing
  rcu: Don't use modular infrastructure in non-modular code
  sched: Make wake_up_nohz_cpu() handle CPUs going offline
  rcu: Use rcu_gp_kthread_wake() to wake up grace period kthreads
  rcu: Use RCU's online-CPU state for expedited IPI retry
  rcu: Exclude RCU-offline CPUs from expedited grace periods
  rcu: Make expedited RCU CPU stall warnings respond to controls
  rcu: Stop disabling expedited RCU CPU stall warnings
  rcu: Drive expedited grace periods from workqueue
  rcu: Consolidate expedited grace period machinery
  documentation: Record reason for rcu_head two-byte alignment
  ...

Pull PNP update from Rafael Wysocki:
 "This makes more PNP core code explicitly non-modular (Paul Gortmaker)"

* tag 'pnp-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PNP: isapnp: make core more explicitly non-modular

Pull ACPI updates from Rafael Wysocki:
 "First off, the ACPICA code in the kernel is updated to upstream
  revision 20160831 that brings in a few bug fixes and cleanups. In
  particular, it is possible to mask GPEs now (and the sysfs interface
  for GPE control is fixed on top of that), problems related to the
  table loading mechanism are fixed and all code related to FADT version
  2 (which has never been part of the ACPI specification) is dropped.

  On the new features front, there is a new watchdog driver based on the
  ACPI WDAT (ACPI Watchdog Action Table), needed on some platforms to
  replace the iTCO watchdog that doesn't work there, and some UART
  devices get new definitions of built-in properties (to be accessed via
  the generic device properties API).

  Also, included is a fix for an ACPI-related PCI resorces allocation
  issue and a few problems in the EC driver and in the button and
  battery drivers are fixed.

  In addition to that, the ACPI CPPC library is updated to make batching
  of requests sent over the PCC channel possible (which reduces the PCC
  usage overhead substantially in some cases) and to support functional
  fixed hardware (FFH) type of CPPC registers access (which will allow
  CPPC to be used on x86 too in the future).

  As usual, there are some assorted fixes and cleanups too.

  Specifics:

   - Update of the ACPICA code in the kernel to upstream revision
     20160831 with the following major changes:

      * New mechanism for GPE masking.
      * Fixes for issues related to the LoadTable operator and table
        loading.
      * Fixes for issues related to so-called module-level code (MLC),
        that is AML that doesn't belong to any methods.
      * Change of the return value of the _OSI method to reflect the
        Windows behavior.
      * GAS (Generic Address Structure) support fix related to 32-bit
        FADT addresses.
      * Elimination of unnecessary FADT version 2 support.
      * ACPI tools fixes and cleanups.

     From Bob Moore, Lv Zheng, and Jung-uk Kim.

   - ACPI sysfs interface updates to fix GPE handling (on top of the new
     GPE masking mechanism in ACPICA) and issues related to table
     loading (Lv Zheng).

   - New watchdog driver based on the ACPI WDAT (ACPI Watchdog Action
     Table), needed on some platforms to replace the iTCO watchdog that
     doesn't work there and related updates of the intel_pmc_ipc,
     i2c/i801 and MFD/lcp_ich drivers (Mika Westerberg).

   - Driver core fix to prevent it from leaking secondary fwnode objects
     during device removal (Lukas Wunner).

   - New definitions of built-in properties for UART in ACPI-based x86
     SoC drivers and a 8250_dw driver quirk for the APM X-Gene SoC
     (Heikki Krogerus).

   - New device ID for the Vulcan SPI controller and constification of
     local strucures in the AMD SoC (APD) ACPI driver (Kamlakant Patel,
     Julia Lawall).

   - Fix for a bug causing the allocation of PCI resorces to fail if
     ACPI-enumerated child platform devices are registered below the PCI
     devices in question (Mika Westerberg).

   - Change of the default polarity for PCI legacy IRQs to high on
     systems booting wth ACPI on platforms with a GIC interrupt
     controller model fixing the discrepancy between the specification
     and HW behavior (Lorenzo Pieralisi).

   - Fixes for the handling of system suspend/resume in the ACPI EC
     driver and update of that driver to make it cope with the cases
     when the EC device defined in the ECDT has to be used throughout
     the entire system life cycle (Lv Zheng).

   - Update of the ACPI CPPC library to allow it to batch requests sent
     over the PCC channel (to reduce overhead), to support the fixed
     functional hardware (FFH) CPPC registers access type, to notify the
     mailbox framework about TX completions when the interrupt flag is
     set for the PCC mailbox, and to support HW-Reduced Communication
     Subspace type 2 (Ashwin Chaugule, Prashanth Prakash, Srinivas
     Pandruvada, Hoan Tran).

   - ACPI button driver fix and documentation update related to the
     handling of laptop lids (Lv Zheng).

   - ACPI battery driver initialization fix (Carlos Garnacho).

   - ACPI GPIO enumeration documentation update (Mika Westerberg).

   - Assorted updates of the core ACPI bus type code (Lukas Wunner, Lv
     Zheng).

   - Assorted cleanups of the ACPI table parsing code and the
     x86-specific ACPI code (Al Stone).

   - Fixes for assorted ACPI-related issues found in linux-next (Wei
     Yongjun)"

* tag 'acpi-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (98 commits)
  ACPI / documentation: Use recommended name in GPIO property names
  watchdog: wdat_wdt: Fix warning for using 0 as NULL
  watchdog: wdat_wdt: fix return value check in wdat_wdt_probe()
  platform/x86: intel_pmc_ipc: Do not create iTCO watchdog when WDAT table exists
  i2c: i801: Do not create iTCO watchdog when WDAT table exists
  mfd: lpc_ich: Do not create iTCO watchdog when WDAT table exists
  ACPI / bus: Adjust ACPI subsystem initialization for new table loading mode
  ACPICA: Parser: Fix a regression in LoadTable support
  ACPICA: Tables: Fix "UNLOAD" code path lock issues
  ACPI / watchdog: Add support for WDAT hardware watchdog
  ACPI / platform: Pay attention to parent device's resources
  PCI: Add pci_find_resource()
  ACPI / CPPC: Support PCC with interrupt flag
  ACPI / sysfs: Update sysfs signature handling code
  ACPI / sysfs: Fix an issue for LoadTable opcode
  ACPICA: Tables: Fix a regression in acpi_tb_find_table()
  ACPI / tables: Remove duplicated include from tables.c
  ACPI / APD: constify local structures
  x86: ACPI: make variable names clearer in acpi_parse_madt_lapic_entries()
  x86: ACPI: remove extraneous white space after semicolon
  ...

Pull power management updates from Rafael Wysocki:
 "Traditionally, cpufreq is the area with the greatest number of
  changes, but there are fewer of them than last time. There also is
  some activity in the generic power domains and the devfreq frameworks,
  a couple of system suspend and hibernation fixes and some assorted
  changes in other places.

  One new feature is the cpufreq change to allow the scheduler to pass
  hints to the governors' utilization update callbacks and some code
  rework based on that. Another one is the support for domain removal in
  the generic power domains framework. Also it is now possible to use
  hibernation with PAGE_POISONING_ZERO enabled and devfreq supports the
  RockChip DFI controller and the rk3399 DMC.

  The rest of the changes is mostly fixes and cleanups in a number of
  places.

  Specifics:

   - Add a mechanism for passing hints from the scheduler to cpufreq
     governors via their utilization update callbacks and use it to
     introduce "IOwait boosting" into the schedutil governor and
     intel_pstate that will make them boost performance if the enqueued
     task was previously waiting on I/O (Rafael Wysocki).

   - Fix a schedutil governor problem that causes it to overestimate
     utilization if SMT is in use (Steve Muckle).

   - Update defconfigs trying to use the schedutil governor as a module
     which is not possible any more (Javier Martinez Canillas).

   - Update the intel_pstate's pstate_sample tracepoint to take "IOwait
     boosting" into account (Srinivas Pandruvada).

   - Fix a problem in the cpufreq core causing it to mishandle the
     initialization of CPUs registered after the cpufreq driver (Viresh
     Kumar, Rafael Wysocki).

   - Make the cpufreq-dt driver support per-policy governor tunables,
     clean it up and update its Kconfig description (Viresh Kumar).

   - Add support for more ARM platforms to the cpufreq-dt driver
     (Chanwoo Choi, Dave Gerlach, Geert Uytterhoeven).

   - Make the cpufreq CPPC driver report frequencies in KHz to avoid
     user space compatiblility issues (Al Stone, Hoan Tran).

   - Clean up a few cpufreq drivers (st, kirkwood, SCPI) a bit (Colin
     Ian King, Markus Elfring).

   - Constify some local structures in the intel_pstate driver (Julia
     Lawall).

   - Add a Documentation/cpu-freq/ entry to MAINTAINERS (Jean Delvare).

   - Add support for PM domain removal to the generic power domains
     (genpd) framework, add new DT helper functions to it and make it
     always enable debugfs support if available (Jon Hunter, Tomeu
     Vizoso).

   - Clean up the generic power domains (genpd) framework and make it
     avoid measuring power-on and power-off latencies during system-wide
     PM transitions (Ulf Hansson).

   - Add support for the RockChip DFI controller and the rk3399 DMC to
     the devfreq framework (Lin Huang, Axel Lin, Arnd Bergmann).

   - Add COMPILE_TEST to the devfreq framework (Krzysztof Kozlowski,
     Stephen Rothwell).

   - Fix a minor issue in the exynos-ppmu devfreq driver and fix up
     devfreq Kconfig indentation style (Wei Yongjun, Jisheng Zhang).

   - Fix the system suspend interface to make suspend-to-idle work if
     platform suspend operations have not been registered (Sudeep
     Holla).

   - Make it possible to use hibernation with PAGE_POISONING_ZERO
     enabled (Anisse Astier).

   - Increas the default timeout of the system suspend/resume watchdog
     and make it depend on EXPERT (Chen Yu).

   - Make the operating performance points (OPP) framework avoid using
     OPPs that aren't supported by the platform and fix a build warning
     in it (Dave Gerlach, Arnd Bergmann).

   - Fix the ARM cpuidle driver's return value (Christophe Jaillet).

   - Make the SmartReflex AVS (Adaptive Voltage Scaling) driver use more
     common logging style (Joe Perches)"

* tag 'pm-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (58 commits)
  PM / OPP: Don't support OPP if it provides supported-hw but platform does not
  cpufreq: st: add missing \n to end of dev_err message
  cpufreq: kirkwood: add missing \n to end of dev_err messages
  PM / Domains: Rename pm_genpd_sync_poweron|poweroff()
  PM / Domains: Don't measure latency of ->power_on|off() during system PM
  PM / Domains: Remove redundant system PM callbacks
  PM / Domains: Simplify detaching a device from its genpd
  PM / devfreq: rk3399_dmc: Remove explictly regulator_put call in .remove
  PM / devfreq: rockchip: add PM_DEVFREQ_EVENT dependency
  PM / OPP: avoid maybe-uninitialized warning
  PM / Domains: Allow holes in genpd_data.domains array
  cpufreq: CPPC: Avoid overflow when calculating desired_perf
  cpufreq: ti: Use generic platdev driver
  cpufreq: intel_pstate: Add io_boost trace
  partial revert of "PM / devfreq: Add COMPILE_TEST for build coverage"
  cpufreq: intel_pstate: Use IOWAIT flag in Atom algorithm
  cpufreq: schedutil: Add iowait boosting
  cpufreq / sched: SCHED_CPUFREQ_IOWAIT flag to indicate iowait condition
  PM / Domains: Add support for removing nested PM domains by provider
  PM / Domains: Add support for removing PM domains
  ...

Pull arm64 updates from Will Deacon:
 "It's a bit all over the place this time with no "killer feature" to
  speak of.  Support for mismatched cache line sizes should help people
  seeing whacky JIT failures on some SoCs, and the big.LITTLE perf
  updates have been a long time coming, but a lot of the changes here
  are cleanups.

  We stray outside arch/arm64 in a few areas: the arch/arm/ arch_timer
  workaround is acked by Russell, the DT/OF bits are acked by Rob, the
  arch_timer clocksource changes acked by Marc, CPU hotplug by tglx and
  jump_label by Peter (all CC'd).

  Summary:

   - Support for execute-only page permissions
   - Support for hibernate and DEBUG_PAGEALLOC
   - Support for heterogeneous systems with mismatches cache line sizes
   - Errata workarounds (A53 843419 update and QorIQ A-008585 timer bug)
   - arm64 PMU perf updates, including cpumasks for heterogeneous systems
   - Set UTS_MACHINE for building rpm packages
   - Yet another head.S tidy-up
   - Some cleanups and refactoring, particularly in the NUMA code
   - Lots of random, non-critical fixes across the board"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (100 commits)
  arm64: tlbflush.h: add __tlbi() macro
  arm64: Kconfig: remove SMP dependence for NUMA
  arm64: Kconfig: select OF/ACPI_NUMA under NUMA config
  arm64: fix dump_backtrace/unwind_frame with NULL tsk
  arm/arm64: arch_timer: Use archdata to indicate vdso suitability
  arm64: arch_timer: Work around QorIQ Erratum A-008585
  arm64: arch_timer: Add device tree binding for A-008585 erratum
  arm64: Correctly bounds check virt_addr_valid
  arm64: migrate exception table users off module.h and onto extable.h
  arm64: pmu: Hoist pmu platform device name
  arm64: pmu: Probe default hw/cache counters
  arm64: pmu: add fallback probe table
  MAINTAINERS: Update ARM PMU PROFILING AND DEBUGGING entry
  arm64: Improve kprobes test for atomic sequence
  arm64/kvm: use alternative auto-nop
  arm64: use alternative auto-nop
  arm64: alternative: add auto-nop infrastructure
  arm64: lse: convert lse alternatives NOP padding to use __nops
  arm64: barriers: introduce nops and __nops macros for NOP sequences
  arm64: sysreg: replace open-coded mrs_s/msr_s with {read,write}_sysreg_s
  ...

Pull ARM fixes from Russell King:
 "Three relatively small fixes for ARM:

   - Roger noticed that dma_max_pfn() was calculating the upper limit
     wrongly, by adding the PFN offset of memory twice.

   - A fix from Robin to correct parsing of MPIDR values when the
     address size is larger than one BE32 unit.

   - A fix from Srinivas to ensure that we do not rely on the boot
     loader (or previous Linux kernel) setting the translation table
     base register a certain way in the decompressor, which can lead to
     crashes"

* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8618/1: decompressor: reset ttbcr fields to use TTBR0 on ARMv7
  ARM: 8617/1: dma: fix dma_max_pfn()
  ARM: 8616/1: dt: Respect property size when parsing CPUs

If the bootloader uses the long descriptor format and jumps to
kernel decompressor code, TTBCR may not be in a right state.
Before enabling the MMU, it is required to clear the TTBCR.PD0
field to use TTBR0 for translation table walks.

The commit dbece458 ("ARM: 7501/1: decompressor:
reset ttbcr for VMSA ARMv7 cores") does the reset of TTBCR.N, but
doesn't consider all the bits for the size of TTBCR.N.

Clear TTBCR.PD0 field and reset all the three bits of TTBCR.N to
indicate the use of TTBR0 and the correct base address width.

Fixes: dbece458 ("ARM: 7501/1: decompressor: reset ttbcr for VMSA ARMv7 cores")
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Srinivas Ramana <sramana@codeaurora.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Pull x86 fixes from Thomas Gleixner:
 "The last regression fixes for 4.8 final:

   - Two patches addressing the fallout of the CR4 optimizations which
     caused CR4-less machines to fail.

   - Fix the VDSO build on big endian machines

   - Take care of FPU initialization if no CPUID is available otherwise
     task struct size ends up being zero

   - Fix up context tracking in case load_gs_index fails"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/entry/64: Fix context tracking state warning when load_gs_index fails
  x86/boot: Initialize FPU and X86_FEATURE_ALWAYS even if we don't have CPUID
  x86/vdso: Fix building on big endian host
  x86/boot: Fix another __read_cr4() case on 486
  x86/init: Fix cr4_init_shadow() on CR4-less machines

Pull MIPS fixes from Ralf Baechle:
 "Another round of fixes:

   - CM: Fix mips_cm_max_vp_width for non-MT kernels on MT systems
   - CPS: Avoid BUG() when offlining pre-r6 CPUs
   - DEC: Avoid gas warnings due to suspicious instruction scheduling by
     manually expanding assembler macros.
   - FTLB: Fix configuration by moving confiuguratoin after probing
   - FTLB: clear execution hazard after changing FTLB enable
   - Highmem: Fix detection of unsupported highmem with cache aliases
   - I6400: Don't touch FTLBP chicken bits
   - microMIPS: Fix BUILD_ROLLBACK_PROLOGUE
   - Malta: Fix IOCU disable switch read for MIPS64
   - Octeon: Fix probing of devices attached to GPIO lines
   - uprobes: Misc small fixes"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: CM: Fix mips_cm_max_vp_width for non-MT kernels on MT systems
  MIPS: Fix detection of unsupported highmem with cache aliases
  MIPS: Malta: Fix IOCU disable switch read for MIPS64
  MIPS: Fix BUILD_ROLLBACK_PROLOGUE for microMIPS
  MIPS: clear execution hazard after changing FTLB enable
  MIPS: Configure FTLB after probing TLB sizes from config4
  MIPS: Stop setting I6400 FTLBP
  MIPS: DEC: Avoid la pseudo-instruction in delay slots
  MIPS: Octeon: mark GPIO controller node not populated after IRQ init.
  MIPS: uprobes: fix use of uninitialised variable
  MIPS: uprobes: remove incorrect set_orig_insn
  MIPS: fix uretprobe implementation
  MIPS: smp-cps: Avoid BUG() when offlining pre-r6 CPUs

Pull sparc fixes from David Miller:

 1) Fix section mismatches in some builds, from Paul Gortmaker.

 2) Need to count huge zero page mappings when doing TSB sizing, from
    Mike Kravetz.

 3) Fix handing of cpu_possible_mask when nr_cpus module option is
    specified, from Atish Patra.

 4) Don't allocate irq stacks until nr_irqs has been processed, also
    from Atish Patra.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc64: Fix non-SMP build.
  sparc64: Fix irq stack bootmem allocation.
  sparc64: Fix cpu_possible_mask if nr_cpus is set
  sparc64 mm: Fix more TSB sizing issues
  sparc64: fix section mismatch in find_numa_latencies_for_group

Pull networking fixes from David Miller:

 1) Fix wrong TCP checksums on MTU probing when checksum offloading is
    disabled, from Douglas Caetano dos Santos.

 2) Fix qdisc backlog updates in qfq and sfb schedulers, from Cong Wang.

 3) Route lookup flow key protocol value is wrong in ip6gre_xmit_other(),
    fix from Lance Richardson.

 4) Scheduling while atomic in multicast routing code of ipv4 and ipv6,
    fix from Nikolay Aleksandrov.

 5) Fix packet alignment in fec driver, from Eric Nelson.

 6) Fix perf regression in sctp due to struct layout and cache misses,
    from Xin Long.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  sctp: fix the issue sctp_diag uses lock_sock in rcu_read_lock
  sctp: change to check peer prsctp_capable when using prsctp polices
  sctp: remove prsctp_param from sctp_chunk
  sctp: move sent_count to the memory hole in sctp_chunk
  tg3: Avoid NULL pointer dereference in tg3_io_error_detected()
  act_ife: Fix false encoding
  act_ife: Fix external mac header on encode
  VSOCK: Don't dec ack backlog twice for rejected connections
  Revert "net: ethernet: bcmgenet: use phydev from struct net_device"
  net: fec: align IP header in hardware
  net: fec: remove QUIRK_HAS_RACC from i.mx27
  net: fec: remove QUIRK_HAS_RACC from i.mx25
  ipmr, ip6mr: fix scheduling while atomic and a deadlock with ipmr_get_route
  ip6_gre: fix flowi6_proto value in ip6gre_xmit_other()
  tcp: fix a compile error in DBGUNDO()
  tcp: fix wrong checksum calculation on MTU probing
  sch_sfb: keep backlog updated with qlen
  sch_qfq: keep backlog updated with qlen
  can: dev: fix deadlock reported after bus-off

* pm-devfreq:
  PM / devfreq: rk3399_dmc: Remove explictly regulator_put call in .remove
  PM / devfreq: rockchip: add PM_DEVFREQ_EVENT dependency
  partial revert of "PM / devfreq: Add COMPILE_TEST for build coverage"
  PM / devfreq: rockchip: add devfreq driver for rk3399 dmc
  Documentation: bindings: add dt documentation for rk3399 dmc
  PM / devfreq: event: support rockchip dfi controller
  Documentation: bindings: add dt documentation for dfi controller
  PM / devfreq: event: remove duplicate devfreq_event_get_drvdata()
  PM / devfreq: fix Kconfig indent style
  PM / devfreq: Add COMPILE_TEST for build coverage
  PM / devfreq: exynos-ppmu: remove unneeded of_node_put()

* pm-sleep:
  PM / Hibernate: allow hibernation with PAGE_POISONING_ZERO
  PM / sleep: enable suspend-to-idle even without registered suspend_ops
  PM / sleep: Increase default DPM watchdog timeout to 120

* pm-cpuidle:
  ARM: cpuidle: Fix error return code

* pm-opp:
  PM / OPP: Don't support OPP if it provides supported-hw but platform does not
  PM / OPP: avoid maybe-uninitialized warning

* pm-avs:
  PM / AVS: SmartReflex: Neaten logging

* pm-cpufreq: (24 commits)
  cpufreq: st: add missing \n to end of dev_err message
  cpufreq: kirkwood: add missing \n to end of dev_err messages
  cpufreq: CPPC: Avoid overflow when calculating desired_perf
  cpufreq: ti: Use generic platdev driver
  cpufreq: intel_pstate: Add io_boost trace
  cpufreq: intel_pstate: Use IOWAIT flag in Atom algorithm
  cpufreq: schedutil: Add iowait boosting
  cpufreq / sched: SCHED_CPUFREQ_IOWAIT flag to indicate iowait condition
  cpufreq: CPPC: Force reporting values in KHz to fix user space interface
  cpufreq: create link to policy only for registered CPUs
  intel_pstate: constify local structures
  cpufreq: dt: Support governor tunables per policy
  cpufreq: dt: Update kconfig description
  cpufreq: dt: Remove unused code
  MAINTAINERS: Add Documentation/cpu-freq/
  cpufreq: dt: Add support for r8a7792
  cpufreq / sched: ignore SMT when determining max cpu capacity
  cpufreq: Drop unnecessary check from cpufreq_policy_alloc()
  ARM: multi_v7_defconfig: Don't attempt to enable schedutil governor as module
  ARM: exynos_defconfig: Don't attempt to enable schedutil governor as module
  ...

* pm-domains:
  PM / Domains: Rename pm_genpd_sync_poweron|poweroff()
  PM / Domains: Don't measure latency of ->power_on|off() during system PM
  PM / Domains: Remove redundant system PM callbacks
  PM / Domains: Simplify detaching a device from its genpd
  PM / Domains: Allow holes in genpd_data.domains array
  PM / Domains: Add support for removing nested PM domains by provider
  PM / Domains: Add support for removing PM domains
  PM / Domains: Store the provider in the PM domain structure
  PM / Domains: Prepare for adding support to remove PM domains
  PM / Domains: Verify the PM domain is present when adding a provider
  PM / Domains: Don't expose xlate and provider helper functions
  PM / Domains: Don't expose generic_pm_domain structure to clients
  staging: board: Remove calls to of_genpd_get_from_provider()
  ARM: EXYNOS: Remove calls to of_genpd_get_from_provider()
  PM / Domains: Add new helper functions for device-tree
  PM / Domains: Always enable debugfs support if available

When discovering the number of VPEs per core, smp_num_siblings will be
incorrect for kernels built without support for the MIPS MultiThreading
(MT) ASE running on systems which implement said ASE. This leads to
accesses to VPEs in secondary cores being performed incorrectly since
mips_cm_vp_id calculates the wrong ID to write to the local "other"
registers. Fix this by examining the number of VPEs in the core as
reported by the CM.

This patch presumes that the number of VPEs will be the same in each
core of the system. As this path only applies to systems with CM version
2.5 or lower, and this property is true of all such known systems, this
is likely to be fine but is described in a comment for good measure.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14338/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

* acpi-button:
  ACPI / button: Add document for ACPI control method lid device restrictions
  ACPI / button: Fix an issue in button.lid_init_state=ignore mode

* acpi-battery:
  ACPI / battery: Add sysfs representation after checking _BST

* acpi-doc:
  ACPI / documentation: Use recommended name in GPIO property names

* acpi-wdat:
  watchdog: wdat_wdt: Fix warning for using 0 as NULL
  watchdog: wdat_wdt: fix return value check in wdat_wdt_probe()
  platform/x86: intel_pmc_ipc: Do not create iTCO watchdog when WDAT table exists
  i2c: i801: Do not create iTCO watchdog when WDAT table exists
  mfd: lpc_ich: Do not create iTCO watchdog when WDAT table exists
  ACPI / watchdog: Add support for WDAT hardware watchdog

* acpi-ec:
  ACPI / EC: Fix issues related to boot_ec
  ACPI / EC: Fix a gap that ECDT EC cannot handle EC events
  ACPI / EC: Fix a memory leakage issue in acpi_ec_add()
  ACPI / EC: Cleanup first_ec/boot_ec code
  ACPI / EC: Enable event freeze mode to improve event handling for suspend process
  ACPI / EC: Add PM operations to improve event handling for suspend process
  ACPI / EC: Add PM operations to improve event handling for resume process
  ACPI / EC: Fix an issue that SCI_EVT cannot be detected after event is enabled
  ACPI / EC: Add EC_FLAGS_QUERY_ENABLED to reveal a hidden logic
  ACPI / EC: Add PM operations for suspend/resume noirq stage

* acpi-x86:
  x86: ACPI: make variable names clearer in acpi_parse_madt_lapic_entries()
  x86: ACPI: remove extraneous white space after semicolon

* acpi-cppc:
  ACPI / CPPC: Support PCC with interrupt flag
  ACPI / CPPC: Add prefix cppc to cpudata structure name
  ACPI / CPPC: Add support for functional fixed hardware address
  ACPI / CPPC: Don't return on CPPC probe failure
  ACPI / CPPC: Allow build with ACPI_CPU_FREQ_PSS config
  ACPI / CPPC: check for error bit in PCC status field
  ACPI / CPPC: move all PCC related information into pcc_data
  ACPI / CPPC: add sysfs support to compute delivered performance
  ACPI / CPPC: set a non-zero value for transition_latency
  ACPI / CPPC: support for batching CPPC requests
  ACPI / CPPC: acquire pcc_lock only while accessing PCC subspace
  ACPI / CPPC: restructure read/writes for efficient sys mapped reg ops
  mailbox: pcc: Support HW-Reduced Communication Subspace type 2

* acpi-soc:
  ACPI / APD: constify local structures
  ACPI / APD: Add device HID for Vulcan SPI controller

* acpi-bus:
  ACPI / bus: Adjust ACPI subsystem initialization for new table loading mode
  ACPI / bus: Make acpi_get_first_physical_node() public

* acpi-sysfs:
  ACPI / sysfs: Update sysfs signature handling code
  ACPI / sysfs: Fix an issue for LoadTable opcode
  ACPI / sysfs: Use new GPE masking mechanism in GPE interface

* acpi-pci:
  ACPI / platform: Pay attention to parent device's resources
  PCI: Add pci_find_resource()
  ACPI / PCI: fix GIC irq model default PCI IRQ polarity

* acpi-tables:
  ACPI / tables: Remove duplicated include from tables.c
  ACPI / tables: do not report the number of entries ignored by acpi_parse_entries()
  ACPI / tables: fix acpi_parse_entries_array() so it traverses all subtables
  ACPI / tables: fix incorrect counts returned by acpi_parse_entries_array()

* acpica: (45 commits)
  ACPICA: Parser: Fix a regression in LoadTable support
  ACPICA: Tables: Fix "UNLOAD" code path lock issues
  ACPICA: Tables: Fix a regression in acpi_tb_find_table()
  ACPICA: Update version to 20160831
  ACPICA: Tables: Tune table mutex to be a leaf lock
  ACPICA: Dispatcher: Fix a mutex issue for method auto serialization
  ACPICA: Namespace: Fix dynamic table loading issues
  ACPICA: Namespace: Add acpi_ns_get_node_unlocked()
  ACPICA: Interpreter: Fix MLC issues by switching to new term_list grammar for table loading
  ACPICA: Update return value for intenal _OSI method
  ACPICA: Tables: Override all 64-bit GAS fields when acpi_gbl_use32_bit_fadt_addresses is TRUE
  ACPICA: Tables: Add new table events indicating table installation/uninstallation
  ACPICA: Tables: Remove wrong table event macros
  ACPICA: Tables: Remove acpi_tb_install_fixed_table()
  ACPICA: Add a couple of casts to uthex.c
  ACPICA: Cleanup for all string-to-integer conversions
  ACPICA: Debugger: Add subcommand for predefined name execution
  ACPICA: Update version to 20160729
  ACPICA: OSL: Fix a regression that old GCC requires a workaround for strchr()
  ACPICA: OSL: Cleanup the inclusion order of the compiler-specific headers
  ...

* device-properties:
  serial: 8250_dw: Add quirk for APM X-Gene SoC
  ACPI / LPSS: Provide build-in properties of the UART
  ACPI / APD: Provide build-in properties of the UART
  driver core: Don't leak secondary fwnode on device removal

Pull SCSI fix from James Bottomley:
 "One final fix before 4.8.

  There was a memory leak triggered by turning scsi mq off due to the
  fact that we assume on host release that the already running hosts
  weren't mq based because that's the state of the global flag (even
  though they were).

  Fix it by tracking this on a per host host basis"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: Avoid that toggling use_blk_mq triggers a memory leak

Pull input fix from Dmitry Torokhov:
 "One small change to make joydev (which is used by older games) to bind
  to devices that export Z axis but not X or Y (such as TRC rudder)"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: joydev - recognize devices with Z axis as joysticks

Merge more fixes from Andrew Morton:
 "Three fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  include/linux/property.h: fix typo/compile error
  ocfs2: fix deadlock on mmapped page in ocfs2_write_begin_nolock()
  mm: workingset: fix crash in shadow node shrinker caused by replace_page_cache_page()