- 29 Mar, 2006 20 commits
-
-
Oleg Nesterov authored
__exit_signal() does important cleanups atomically under ->siglock. It is also called from copy_process's error path. This is not good, for example we can't move __unhash_process() under ->siglock for that reason. We should not mix these 2 paths, just look at ugly 'if (p->sighand)' under 'bad_fork_cleanup_sighand:' label. For copy_process() case it is sufficient to just backout copy_signal(), nothing more. Again, nobody can see this task yet. For CLONE_THREAD case we just decrement signal->count, otherwise nobody can see this ->signal and we can free it lockless. This patch assumes it is safe to do exit_thread_group_keys() without tasklist_lock. Signed-off-by:
Oleg Nesterov <oleg@tv-sign.ru> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Oleg Nesterov authored
The only caller of exit_sighand(tsk) is copy_process's error path. We can call __exit_sighand() directly and kill exit_sighand(). This 'tsk' was not yet registered in pid_hash[] or init_task.tasks, it has no external references, nobody can see it, and IF (clone_flags & CLONE_SIGHAND) At least 'current' has a reference to ->sighand, this means atomic_dec_and_test(sighand->count) can't be true. ELSE Nobody can see this ->sighand, this means we can free it without any locking. Signed-off-by:
"Paul E. McKenney" <paulmck@us.ibm.com> Signed-off-by:
-
Oleg Nesterov authored
In my opinion this patch cleans up the code. Signed-off-by:
-
Oleg Nesterov authored
Add lock_task_sighand() helper and converts group_send_sig_info() to use it. Hopefully we will have more users soon. This patch also removes '!sighand->count' and '!p->usage' checks, I think they both are bogus, racy and unneeded (but probably it makes sense to restore them as BUG_ON()s). ->sighand is cleared and it's ->count is decremented in release_task() with sighand->siglock held, so it is a bug to have '!p->usage || !->count' after we already locked and verified it is the same. On the other hand, an already dead task without ->sighand can have a non-zero ->usage due to ptrace, for example. If we read the stale value of ->sighand we must see the change after spin_lock(), because that change was done while holding that same old ->sighand.siglock. Signed-off-by:
-
Oleg Nesterov authored
This patch borrows a clever Hugh's 'struct anon_vma' trick. Without tasklist_lock held we can't trust task->sighand until we locked it and re-checked that it is still the same. But this means we don't need to defer 'kmem_cache_free(sighand)'. We can return the memory to slab immediately, all we need is to be sure that sighand->siglock can't dissapear inside rcu protected section. To do so we need to initialize ->siglock inside ctor function, SLAB_DESTROY_BY_RCU does the rest. Signed-off-by:
-
Oleg Nesterov authored
Use ptrace_unlink() instead of open-coding. No changes in kernel/exit.o Signed-off-by:
-
Oleg Nesterov authored
Use NULL instead of (... *)0 Signed-off-by:
-
Oleg Nesterov authored
Use remove_parent/add_parent instead of open coding. No changes in kernel/exit.o Signed-off-by:
-
Oleg Nesterov authored
daemonize() calls set_special_pids(1,1), while init and kernel threads spawned from init/main.c:init() run with 0,0 special pids. This patch changes INIT_SIGNALS() so that that they run with ->pgrp == ->session == 1 also. This patch relies on fact that swapper's pid == 1. Now we have no hashed zero pids in pid_hash[]. User-space visibible change is that now /sbin/init runs with (1,1) special pids and becomes a session leader. Quoting Eric W. Biederman: > > daemonize consuming pids (1,1) then consumes pgrp 1. So that when > /sbin/init calls setsid() it thinks /sbin/init is a process group > leader and setsid() fails. So /sbin/init wants pgrp 1 session 1 > but doesn't get it. I am pretty certain daemonize did not exist so > /sbin/init got pgrp 1 session 1 in 2.4. > > That is the bug that is being fixed. > > This patch takes things one step farther and essentially calls > setsid() for pid == 1 before init is execed. That is new behavior > but it cleans up the kernel as we now do not need to support the > case of a process without a process group or a session. > > The only process that could have possibly cared was /sbin/init > and it already calls setsid() because it doesn't want that. > > If this was going to break anything noticeable the change in behavior > from 2.4 to 2.6 would have already done that. Signed-off-by:
-
Oleg Nesterov authored
fork_idle() does unhash_process() just after copy_process(). Contrary, boot_cpu's idle thread explicitely registers itself for each pid_type with nr = 0. copy_process() already checks p->pid != 0 before process_counts++, I think we can just skip attach_pid() calls and job control inits for idle threads and kill unhash_process(). We don't need to cleanup ->proc_dentry in fork_idle() because with this patch idle threads are never hashed in kernel/pid.c:pid_hash[]. We don't need to hash pid == 0 in pidmap_init(). free_pidmap() is never called with pid == 0 arg, so it will never be reused. So it is still possible to use pid == 0 in any PIDTYPE_xxx namespace from kernel/pid.c's POV. However with this patch we don't hash pid == 0 for PIDTYPE_PID case. We still have have PIDTYPE_PGID/PIDTYPE_SID entries with pid == 0: /sbin/init and kernel threads which don't call daemonize(). Signed-off-by:
-
Oleg Nesterov authored
Both SET_LINKS() and SET_LINKS/REMOVE_LINKS() have exactly one caller, and these callers already check thread_group_leader(). This patch kills theese macros, they mix two different things: setting process's parent and registering it in init_task.tasks list. Callers are updated to do these actions by hand. Signed-off-by:
-
Oleg Nesterov authored
There are places where kernel uses REMOVE_LINKS/SET_LINKS while changing process's ->parent. Use add_parent/remove_parent instead, they don't abuse of global process list. Signed-off-by:
-
Oleg Nesterov authored
add_parent(p, parent) is always called with parent == p->parent, and it makes no sense to do it differently. This patch removes this argument. No changes in affected .o files. Signed-off-by:
-
Oleg Nesterov authored
'child_reaper' arg is not used in choose_new_parent(). "->exit_state >= EXIT_ZOMBIE" check is a leftover, was valid when EXIT_ZOMBIE lived in ->state var. Signed-off-by:
Eric Biederman <ebiederm@xmission.com> Signed-off-by:
-
Eric W. Biederman authored
switch_exec_pids is only called from de_thread by way of exec, and it is only called when we are exec'ing from a non thread group leader. Currently switch_exec_pids gives the leader the pid of the thread and unhashes and rehashes all of the process groups. The leader is already in the EXIT_DEAD state so no one cares about it's pids. The only concern for the leader is that __unhash_process called from release_task will function correctly. If we don't touch the leader at all we know that __unhash_process will work fine so there is no need to touch the leader. For the task becomming the thread group leader, we just need to give it the pid of the old thread group leader, add it to the task list, and attach it to the session and the process group of the thread group. Currently de_thread is also adding the task to the task list which is just silly. Currently the only leader of __detach_pid besides detach_pid is switch_exec_pids because of the ugly extra work that was being performed. So this patch removes switch_exec_pids because it is doing too much, it is creating an unnecessary special case in pid.c, duing work duplicated in de_thread, and generally obscuring what it is going on. The necessary work is added to de_thread, and it seems to be a little clearer there what is going on. Signed-off-by:
-
Eric W. Biederman authored
I'm not really certain what the thinking was but the code obviously wanted to walk processes other than just those in it's session, for purposes of do_SAK. Just walking those tasks that don't have a session assigned sounds at the very least incomplete. So modify the code to kill everything in the session and anything else that might have the tty open. Hopefully this helps if the do_SAK functionality is ever finished. Signed-off-by:
-
Eric W. Biederman authored
We already have the tasklist_lock so there is no need for us to reacquire it with send_group_sig_info. reader/writer locks allow multiple readers and thus recursion so the old code was ok just wastful. Signed-off-by:
-
Eric W. Biederman authored
The kill_sl function doesn't exist in the kernel so a prototype is completely unnecessary. Signed-off-by:
-
Oleg Nesterov authored
I think it is enough to take tasklist_lock for reading while changing child_reaper: Reparenting needs write_lock(tasklist_lock) Only one thread in a thread group can do exec() sighand->siglock garantees that get_signal_to_deliver() will not see a stale value of child_reaper. This means that we can change child_reaper earlier, without calling zap_other_threads() twice. "child_reaper = current" is a NOOP when init does exec from main thread, we don't care. Signed-off-by:
-
Eric W. Biederman authored
After looking at the problem of init calling exec some more I figured out an easy way to make the code work. The actual symptom without out this patch is that all threads will die except pid == 1, and the thread calling exec. The thread calling exec will wait forever for pid == 1 to die. Since pid == 1 does not install a handler for SIGKILL it will never die. This modifies the tests for init from current->pid == 1 to the equivalent current == child_reaper. And then it causes exec in the ugly case to modify child_reaper. The only weird symptom is that you wind up with an init process that doesn't have the oldest start time on the box. Signed-off-by:
-
- 28 Mar, 2006 20 commits
-
-
Linus Torvalds authored
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 3388/1: ixp23xx: add core ixp23xx support [ARM] 3417/1: add support for logicpd pxa270 card engine [ARM] 3387/1: ixp23xx: add defconfig [ARM] 3377/2: add support for intel xsc3 core [ARM] Move ice-dcc code into misc.c [ARM] Fix decompressor serial IO to give CRLF not LFCR [ARM] proc-v6: mark page table walks outer-cacheable, shared. Enable NX. [ARM] nommu: trivial patch for arch/arm/lib/Makefile [ARM] 3416/1: Update LART site URL [ARM] 3415/1: Akita: Add missing EXPORT_SYMBOL [ARM] 3414/1: ep93xx: reset ethernet controller before uncompressing
-
Linus Torvalds authored
* master.kernel.org:/home/rmk/linux-2.6-serial: [SERIAL] Provide Cirrus EP93xx AMBA PL010 serial support. [SERIAL] amba-pl010: allow platforms to specify modem control method [SERIAL] Remove obsoleted au1x00_uart driver [SERIAL] Small time UART configuration fix for AU1100 processor
-
Lennert Buytenhek authored
Patch from Lennert Buytenhek This patch adds support for the Intel ixp23xx series of CPUs. The ixp23xx is an XSC3 based CPU with 512K of L2 cache, a 64bit 66MHz PCI interface, two DDR RAM interfaces, QDR RAM interfaces, two gigabit MACs, two 10/100 MACs, expansion bus, four microengines, a Media and Switch Fabric unit almost identical to the one on the ixp2400, two xscale (8250ish) UARTs and a bunch of other stuff. This patch adds the core ixp23xx support code, and support for the ADI Engineering Roadrunner, Intel IXDP2351, and IP Fabrics Double Espresso platforms. Signed-off-by:
Deepak Saxena <dsaxena@plexity.net> Signed-off-by:
Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk>
-
Lennert Buytenhek authored
Patch from Lennert Buytenhek Add support for the LogicPD PXA270 Card Engine. Signed-off-by:
Nicolas Pitre <nico@cam.org> Signed-off-by:
-
Lennert Buytenhek authored
Patch from Lennert Buytenhek Add ixp23xx defconfig. Signed-off-by:
-
Lennert Buytenhek authored
Patch from Lennert Buytenhek This patch adds support for the new XScale v3 core. This is an ARMv5 ISA core with the following additions: - L2 cache - I/O coherency support (on select chipsets) - Low-Locality Reference cache attributes (replaces mini-cache) - Supersections (v6 compatible) - 36-bit addressing (v6 compatible) - Single instruction cache line clean/invalidate - LRU cache replacement (vs round-robin) I attempted to merge the XSC3 support into proc-xscale.S, but XSC3 cores have separate errata and have to handle things like L2, so it is simpler to keep it separate. L2 cache support is currently a build option because the L2 enable bit must be set before we enable the MMU and there is no easy way to capture command line parameters at this point. There are still optimizations that can be done such as using LLR for copypage (in theory using the exisiting mini-cache code) but those can be addressed down the road. Signed-off-by:
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] cpufreq_conservative: keep ignore_nice_load and freq_step values when reselected [CPUFREQ] powernow: remove private for_each_cpu_mask() [CPUFREQ] hotplug cpu fix for powernow-k8 [PATCH] cpufreq_ondemand: add range check [PATCH] cpufreq_ondemand: keep ignore_nice_load value when it is reselected [PATCH] cpufreq_ondemand: Warn if it cannot run due to too long transition latency [PATCH] cpufreq_conservative: alternative initialise approach [PATCH] cpufreq_conservative: make for_each_cpu() safe [PATCH] cpufreq_conservative: alter default responsiveness [PATCH] cpufreq_conservative: aligning of codebase with ondemand
-
git://brick.kernel.dk/data/git/linux-2.6-blockLinus Torvalds authored
* 'cfq-merge' of git://brick.kernel.dk/data/git/linux-2.6-block: [BLOCK] cfq-iosched: seek and async performance fixes [PATCH] ll_rw_blk: fix 80-col offender in put_io_context() [PATCH] cfq-iosched: small cfq_choose_req() optimization [PATCH] [BLOCK] cfq-iosched: change cfq io context linking from list to tree
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Implement futex_atomic_cmpxchg_inatomic().
-
Mattia Dongili authored
Keep the value of ignore_nice_load and freq_step of the conservative governor after the governor is deselected and reselected. Signed-off-by:
Mattia Dongili <malattia@linux.it> Signed-off-by:
Dave Jones <davej@redhat.com>
-
Andrew Morton authored
kernel/futex_compat.c: In function `compat_sys_futex': kernel/futex_compat.c:140: warning: passing arg 1 of `do_futex' makes integer from pointer without a cast kernel/futex_compat.c:140: warning: passing arg 5 of `do_futex' makes integer from pointer without a cast Not sure what Ingo was thinking of here. Put the casts back in. Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Jesper Juhl authored
Get rid of unnessesary casts of kmalloc() return value in sound/ Signed-off-by:
Jesper Juhl <jesper.juhl@gmail.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Alexey Dobriyan authored
Fix a lot of typos. Eyeballed by jmc@ in OpenBSD. Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
Jesper Juhl authored
Fix a few trivial mistakes in Documentation/cputopology.txt Signed-off-by:
-
Jesper Juhl authored
Fix "signed vs unsigned" in nmi_watchdog_tick. Signed-off-by:
-
Jesper Juhl authored
vfree() does it's own NULL checking, no need for explicit check before calling it. Signed-off-by:
-
Jesper Juhl authored
There's no need to check pointers for NULL before handing them to vfree(). Signed-off-by:
-
Jesper Juhl authored
vfree() checks for NULL, no need to do it explicitly. Signed-off-by:
Zach Brown <zab@zabbo.net> Signed-off-by:
-
Jesper Juhl authored
There's no need to check the vfree() argument for NULL. Signed-off-by:
-
Matthias Gehre authored
Replace all occurences of 0xff.. in calls to function pci_set_dma_mask() and pci_set_consistant_dma_mask() with the corresponding DMA_xBIT_MASK from linux/dma-mapping.h. Signed-off-by:
Matthias Gehre <M.Gehre@gmx.de> Signed-off-by:
-
