- 06 Aug, 2010 6 commits
-
-
Kukjin Kim authored
-
Kukjin Kim authored
-
Kukjin Kim authored
-
Kukjin Kim authored
-
Kyungmin Park authored
This patch adds Samsung Mobile S5PC210 Reference Board, UNIVERSAL_C210 board support. Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> [kgene.kim@samsung.com: changed machine name] Signed-off-by:
Kukjin Kim <kgene.kim@samsung.com>
-
Naveen Krishna Ch authored
This patch adds helper functions for I2C channel 0 and 1, GPIO configurations for I2C on S5P6440 and support I2C-0/1 devices on SMDK6440. Signed-off-by:
Naveen Krishna Ch <ch.naveen@samsung.com> Signed-off-by:
-
- 05 Aug, 2010 34 commits
-
-
Kyungmin Park authored
To use OneNAND interrupt at drivers, also extend DMA address to cover fully. Signed-off-by:
-
Marek Szyprowski authored
This patch performs minor clocks cleanup for S5PV210 SoC. The duplicate HCLK clock entry for sdhci-s3c has been disabled and the index of a reserved entry has been fixed. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Marek Szyprowski authored
This patch add support for SDHCI blocks on Samsung Goni board. The following host controllers are defined: 1. Internal MoviNAND device (permanently wired to the controller) 2. Internal WiFI SDIO device (card is activated by power regualor) 3. External MMC/SD socket (card detection is provided by external gpio interrupt) Signed-off-by:
-
Marek Szyprowski authored
This patch add support for SDHCI blocks on Samsung Aquila board. The following host controllers are defined: 1. Internal MoviNAND device (permanently wired to the controller) 2. Internal WiFI SDIO device (card is activated by power regualor) 3. External MMC/SD socket (card detection is provided by external gpio interrupt) Signed-off-by:
-
Naveen Krishna Ch authored
This patch adds support I2C-0/1/2 devices to the SMDKV210/SMDKC110. Signed-off-by:
-
Kyungmin Park authored
This patch adds configuration of proper mux pins for support I2C channel 0, 1, and 2 on S5PV310/S5PC210. Signed-off-by:
-
Jongpill Lee authored
This patch adds UART serial port support for S5PV310. In the case of that serial device has just one clock source, driver can not control clock source. So add check function in get_clksrc and set_clksrc. Signed-off-by:
Jongpill Lee <boyko.lee@samsung.com> Acked-by:
Changhwan Youn <chaos.youn@samsung.com> Signed-off-by:
-
Changhwan Youn authored
This patch adds Samsung SMDKV310 board support file. Signed-off-by:
-
Changhwan Youn authored
This patch adds the Kconfig and Makefile for the new S5PV310 SoC. It also updates arch/arm Kconfig, Makefile and arch/arm/mm/Kconfig to include support for the new S5PV310. Signed-off-by:
-
Changhwan Youn authored
This patch adds timer support for S5PV310. Until now, all S5P SoCs use CONFIG_ARCH_USES_GETTIMEOFFSET macro as a default configuration. Instead,S5PV310 implements clocksource and clock_event_device to support the high resolution timer and tickless system. Signed-off-by:
Hyuk Lee <hyuk1.lee@samsung.com> Signed-off-by:
-
Changhwan Youn authored
This patch adds IRQ support for S5PV310. ARM GIC is installed in S5PV310 instead of VIC which is in every other CPUs in S5P series. Several irq combiners are used to resolve the lack of irq lines in current implementation. Signed-off-by:
-
Changhwan Youn authored
This patch adds clock and pll support for S5PV310. Signed-off-by:
-
Changhwan Youn authored
This patch adds Samsung S5PV310/S5PC210 CPU support. The S5PV310/S5PC210 integrates a ARM Cortex A9 multi-core. Signed-off-by:
Jiseong Oh <jiseong.oh@samsung.com> [kgene.kim@samsung.com: fix build errors] Signed-off-by:
-
Changhwan Youn authored
The uart offset between channels has been 0x400 for all S5P series and to present virtual and physical offsets, both number 0x400 and S3C_UART_OFFSET have been used together. This patch removes the use of the number 0x400 and expands the virtual mapping size of S3C_VA_UART from 4KB to 512KB to support the CPU with S3C_UART_OFFSET being 0x10000. Signed-off-by:
-
Jongpill Lee authored
Add support for the FRACVAL register on the newer UART blocks which provides the same function as UDIVSLOT register but the FRACVAL is easier to implement. To support UDIVSLOT register, UDIVSLOT table search is necessary though supporting FRACVAL only needs the index value of UDIVSLOT table. Signed-off-by:
-
Jongpill Lee authored
This patch adds s5pv210_sw_reset() which includes SWRESET for S5PV210/S5PC110. Signed-off-by:
-
Atul Dahiya authored
This patch adds support RTC driver for Samsung S5PV210/S5PC110. Signed-off-by:
Atul Dahiya <atul.dahiya@samsung.com> Signed-off-by:
-
Hyuk Lee authored
This patch adds support HSMMC on SMDKV210, and gpio configuration for S5PV210 hsmmc3. Signed-off-by:
-
Naveen Krishna Ch authored
This patch is to support keypad device to the SMDKV210 board. Signed-off-by:
-
Joonyoung Shim authored
This patch adds the keypad device platform helpers for S5PV210 cpu. Signed-off-by:
Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by:
-
Kukjin Kim authored
Now that S5PC110 machines and S5PV210 machines can be built into one kernel, update mach-s5pv210/Kconfig and s5pv210_defconfig. Tested on Aquila(S5PC110), GONI(S5PC110), SMDKC110(S5PC110) and SMDKV210(S5PV210). Created and tested against linux-2.6.35-rc5. Signed-off-by:
-
Abhilash Kesavan authored
Following is added for the CF-ATA driver: - Platform data strucure instantiation - Platform device enabling code - Platform-specific gpio setup code - Fixed IRQ naming to match across 64xx and v210 Signed-off-by:
Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by:
-
Marek Szyprowski authored
This patch adds required platform definitions for MAX8998 PMIC driver. Power regulators for LDO and BUCK outputs has been defined as well as a simple gpio-keys button for power key (to enable wakeup functionality with external interrupt). Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> [kgene.kim@samsung.com: minor title fix] Signed-off-by:
-
Marek Szyprowski authored
This patch adds required platform definitions for MAX8998 PMIC driver. Power regulators for LDO and BUCK outputs has been defined as well as a simple gpio-keys button for power key (to enable wakeup functionality with external interrupt). Signed-off-by:
-
Marek Szyprowski authored
This patch adds required platform definitions to enable s3c-fb driver on GONI board. One framebuffer window in 480x800x16bpp mode is defined. Signed-off-by:
-
Kukjin Kim authored
This patch fixes on MAX_PHYSMEM_BITS for Sparsemem on S5PV210/S5PC110. Because physical memory can be located from 0x20000000 to 0x7fffffff, so MAX_PHYSMEM_BITS is 31 and not 32. Signed-off-by: -
Joonyoung Shim authored
This patch is to support OneNAND device to the Aquila board. Signed-off-by:
-
Joonyoung Shim authored
This patch is to support OneNAND device to the GONI board. Signed-off-by:
-
Joonyoung Shim authored
The GONI board uses max UART FIFO size to each UART channels. Signed-off-by:
-
Joonyoung Shim authored
The Aquila board uses max UART FIFO size to each UART channels. UART0 supports 256 bytes FIFO, but Aquila board supports 128 bytes FIFO because of initial chip bug. Also, this patch fixes to "s/smdkv210/aquila". Signed-off-by:
-
Marek Szyprowski authored
This patch adds support for MP04 and MP05 gpio banks. Signed-off-by:
-
Marek Szyprowski authored
This patch performs minor clocks cleanup for S5PC100 SoC. HSMMC special clocks has been renamed back to sclk_mmc to match the common style of clock names. This clock has been also added to sdhci clock source list. The duplicate HCLK clock entry for sdhci-s3c has been disabled. Signed-off-by:
-
Atul Dahiya authored
This patch adds support RTC driver for Samsung S5PC100. Signed-off-by:
-
Naveen Krishna Ch authored
This patch is to support keypad device to the SMDKC100 board. Signed-off-by:
-
