- 11 Dec, 2009 40 commits
-
-
Cliff Cai authored
If we clear the interrupt pending bits at the end, we sometimes return too fast and have the same interrupt assert itself. There is no way in a Blackfin system to force a sync of this state, so the hardware manual instructs people to clear interrupt flags early in their ISR. Signed-off-by:
Cliff Cai <cliff.cai@analog.com> Signed-off-by:
Mike Frysinger <vapier@gentoo.org> Signed-off-by:
Anand Gadiyar <gadiyar@ti.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Bryan Wu authored
Update function definition to match latest MUSB framework. Signed-off-by:
Bryan Wu <cooloney@kernel.org> Signed-off-by:
-
Sonic Zhang authored
Only allow USE_MODE1 when the Blackfin part is not affected by anomaly 05000456 (USB Receive Interrupt Is Not Generated in DMA Mode 1) since we can't support the mode in that case. Signed-off-by:
Sonic Zhang <sonic.zhang@analog.com> Signed-off-by:
-
Sonic Zhang authored
Add some helpful notes about how the driver works around different anomalies that exist in the on-chip host controller. Signed-off-by:
-
Sonic Zhang authored
Do not allow MUSB driver to be selected on derivatives that don't have the MUSB controller on them. Signed-off-by:
-
Bryan Wu authored
Signed-off-by:
-
Bryan Wu authored
The Blackfin version of musb_read_target_reg_base() returns a u16 when the common code expects a (void __iomem *), so update the Blackfin function to return the right value. This fixes the compile warning: drivers/usb/musb/musb_core.c: In function 'musb_core_init': drivers/usb/musb/musb_core.c:1448: warning: assignment makes pointer from integer without a cast Signed-off-by:
-
Mike Frysinger authored
Otherwise gcc will whine about epnum/dma_reg being unused when building for BF54x parts. Signed-off-by:
Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by:
-
Sarah Sharp authored
The xHCI 0.95 and 0.96 specification defines several transfer buffer request completion codes that indicate a USB transaction error occurred. When a stall, babble, transaction, or split transaction error completion code is set, the xHCI has halted that endpoint ring. Software must issue a Reset Endpoint command and a Set Transfer Ring Dequeue Pointer command to clean up the halted ring. The USB device driver is supposed to call into usb_reset_endpoint() when an endpoint stalls. That calls into the xHCI driver to issue the proper commands. However, drivers don't call that function for the other errors that cause the xHC to halt the endpoint ring. If a babble, transaction, or split transaction error occurs, check if the endpoint context reports a halted condition, and clean up the endpoint ring if it does. Signed-off-by:
Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by:
-
Sarah Sharp authored
An xHCI host controller manufacturer can choose to implement several vendor-specific informational completion codes. These are all to be treated like a successful transfer completion. Signed-off-by:
-
Sarah Sharp authored
When the xHCI hardware says a transfer completed with a split transaction error, set the URB status to -EPROTO. Signed-off-by:
-
Sarah Sharp authored
The transfer descriptor (TD) is a series of transfer request buffers (TRBs) that describe the buffer pointer, length, and other characteristics. The xHCI controllers want to know an estimate of how long the TD is, for caching reasons. In each TRB, there is a "TD size" field that provides a rough estimate of the remaining buffers to be transmitted, including the buffer pointed to by that TRB. The TD size is 5 bits long, and contains the remaining size in bytes, right shifted by 10 bits. So a remaining TD size less than 1024 would get a zero in the TD size field, and a remaining size greater than 32767 would get 31 in the field. This patches fixes a bug in the TD_REMAINDER macro that is triggered when the URB has a scatter gather list with a size bigger than 32767 bytes. Not all host controllers pay attention to the TD size field, so the bug will not appear on all USB 3.0 hosts. Signed-off-by:
-
Michal Nazarewicz authored
The Multifunction Composite Gadget has two configurations consisting of Ethernet (RNDIS in first and CDC Ethernet in second configuration), CDC Serial and File-backed Storage functions. When connected to a Windows host, the first configuration is chosen thus gadget provides RNDIS Ethernet, serial and mass storage whereas when connected to Linux host, second configuration is chosen thus providing CDC Ethernet, serial and mass storage. Which configurations are built can be configured via KConfig options. Signed-off-by:
Michal Nazarewicz <m.nazarewicz@samsung.com> Signed-off-by:
-
Michal Nazarewicz authored
thread_exits callback has been added to fsg_common structure. This callback is called when MSF's thread exits (is terminated by a signal or function is unregistered). It's then gadget's responsibility to unregister the gadget. Signed-off-by:
-
Michal Nazarewicz authored
Changed definition of usb_composite_unregister() function removing __exit declaration. This way, the function is included even if the whole code was not compiled as module. This is required if a compiled-in code would like to unregister a composite gadget. Signed-off-by:
-
Michal Nazarewicz authored
Most of the data from fsg_dev have been moved to fsg_common structure. The fsg_dev structure holds only endpoint dependent data. The fsg_common structure has a fsg pointer which points to active fsg_dev structure -- endpoints are referenced via this pointer. This fixes the problem of several threads created when a single instance of MSF is used in several USB configurations. Signed-off-by:
-
Michal Nazarewicz authored
Fixed most of the errors and warnings in f_mass_storage.c and storage_common.c reported by checkpatch.pl as well as updated comments. Signed-off-by:
-
Michal Nazarewicz authored
A two fsg_config fields were added: * lun_name_format which lets one specify format of a name used when registering LUN devices. It is useful if there would be ever need for two MSFs to be used in a single composite gadget (as opposed to single MSF in two configuration); and * thread_name which lets one specify the name of a kernel thread used by MSF. This is not required since two or more threads can have the same name but nevertheless it's here for consistency. Signed-off-by:
-
Michal Nazarewicz authored
Removed all references to mod_data in f_mass_storage.c and instead created fsg_config structure fsg_common_init() takes as an argument -- it stores all configuration options that were previously taken from mod_data. Moreover, The fsg_config structure allows per-LUN configuration of removable and CD-ROM emulation. Module parameters are handled by defining an object of fsg_module_parameters structure and then declaring module parameters via FSG_MODULE_PARAMETERS() macro. It adds proper declarations to the code making specified object be populated from module parameters. To use values stored there one may use either fsg_config_from_params() which will will a fsg_config structure with values taken from fsg_module_parameters structure or fsg_common_from_params() which will initialise fsg_common structure directly. Signed-off-by:
-
Michal Nazarewicz authored
The f_mass_storage.c has been changed into a composite function. mass_storage.c file has been introduced which defines a g_mass_storage gadget based on composite framework. Signed-off-by:
-
Sarah Sharp authored
It's not surprising that the transfer request buffer (TRB) physical to virtual address translation function has bugs in it, since I wrote most of it at 4am last October. Add a test suite to check the TRB math. This runs at memory initialization time, and causes the driver to fail to load if the TRB math fails. Please excuse the excessively long lines in the test vectors; they can't really be made shorter and still be readable. Signed-off-by:
-
Vikram Pandita authored
Allow module_param to be writeable. This allows us to change the parameter if usbtest is built-in in the kernel. Signed-off-by:
Vikram Pandita <vikram.pandita@ti.com> Signed-off-by:
-
Dan Carpenter authored
Add a missing goto. We dereference usb_class on the next line. Found by smatch static checker. Signed-off-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
-
Dan Carpenter authored
td and dev can not be null. Also they are dereferenced in list_for_each_entry_safe and list_for_each before the check happens so we would have an oops if it were possible for them to be null. Found using the smatch static checker. Signed-off-by:
Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by:
-
Alan Stern authored
This patch (as1302) removes the auto_pm flag from struct usb_device. The flag's only purpose was to distinguish between autosuspends and external suspends, but that information is now available in the pm_message_t argument passed to suspend methods. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
H Hartley Sweeten authored
Quiet the following sparse noise: warning: Using plain integer as NULL pointer Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Zhang Le authored
Add D-Link DWM-162-U5 device id 1e0e:ce16 into option driver. The device has 4 interfaces, of which 1 is handled by storage and the other 3 by option driver. The device appears first as CD-only 05c6:2100 device and must be switched to 1e0e:ce16 mode either by using "eject CD" or usb_modeswitch. The MessageContent for usb_modeswitch.conf is: "55534243e0c26a85000000000000061b000000020000000000000000000000" Signed-off-by:
Zhang Le <r0bertz@gentoo.org> Signed-off-by:
-
bart.hartgers@gmail.com authored
Signed-off-by:
Bart Hartgers <bart.hartgers@gmail.com> Cc: Mike McCormack <mikem@ring3k.org> Signed-off-by:
-
bart.hartgers@gmail.com authored
Signed-off-by:
-
bart.hartgers@gmail.com authored
Signed-off-by:
-
bart.hartgers@gmail.com authored
Signed-off-by:
-
bart.hartgers@gmail.com authored
Signed-off-by:
-
bart.hartgers@gmail.com authored
Signed-off-by:
-
Russ Dill authored
USB drivers that create character devices call usb_register_dev in their probe function. This associates the usb_interface device with that minor number and creates the character device and announces it to the world. However, the driver's probe function is called before the new usb_interface is added to the driver's klist_devices. This is a problem because userspace will respond to the character device creation announcement by opening the character device. The driver's open function will the call usb_find_interface to find the usb_interface associated with that minor number. usb_find_interface will walk the driver's list of devices and find the usb_interface with the matching minor number. Because the announcement happens before the usb_interface is added to the driver's klist_devices, a race condition exists. A straightforward fix is to walk the list of devices on usb_bus_type instead since the device is added to that list before the announcement occurs. bus_find_device calls get_device to bump the reference count on the found device. It is arguable that the reference count should be dropped by the caller of usb_find_interface instead of usb_find_interface, however, the current users of usb_find_interface do not expect this. Signed-off-by:
Russ Dill <Russ.Dill@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by:
-
Roel Kluin authored
istl_flip is a signed bitfield of one bit so it can be -1 or 0. However in drivers/usb/host/isp1362-hcd.c:1103: finish_iso_transfers(isp1362_hcd, &isp1362_hcd->istl_queue[isp1362_hcd->istl_flip]); So if isp1362_hcd->istl_flip is set, the 2nd argument becomes &isp1362_hcd->istl_queue[-1], which is invalid. Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Acked-by:
-
Nathaniel McCallum authored
This patch fixes a bug when incrementing/decrementing on a BCD formatted integer (i.e. 0x09++ should be 0x10 not 0x0A). It just adds a function for incrementing/decrementing BCD integers by converting to decimal, doing the increment/decrement and then converting back to BCD. Signed-off-by:
Nathaniel McCallum <nathaniel@natemccallum.com> Signed-off-by:
-
Nathaniel McCallum authored
The current code to generate usb modaliases from usb_device_id assumes that the device's bcdDevice descriptor will actually be in BCD format. While this should be a sane assumption, some devices don't follow spec and just use plain old hex. This causes drivers for these devices to generate invalid modalias lines which will never actually match for the hardware. The following patch adds hex support for bcdDevice in file2alias.c by detecting when a driver uses a hex formatted bcdDevice_(lo|hi) and adjusts the output to hex format accordingly. Drivers for devices which have bcdDevice conforming to BCD will have no change in modalias output. Drivers for devices which don't conform (i.e. ibmcam) should now generate valid modaliases. EXAMPLE OUTPUT (ibmcam; space added to highlight change) Old: usb:v0545p800D d030[10-9] dc*dsc*dp*ic*isc*ip* New: usb:v0545p800D d030a dc*dsc*dp*ic*isc*ip* Signed-off-by: -
Adrian Taylor authored
Nokia S60 phones expose two ACM channels. The first is a modem and is picked up by the standard AT-command interface information in the CDC-ACM driver. The second is marked as having a vendor-specific protocol. Normally, we don't expose those as ttys. (On some other devices, they may be claimed by the rndis_host driver and used as a network interface). But on S60 this second ACM channel is the way that third-party S60 application developers are expected to communicate over USB. It acts as a serial device at the S60 end, and so it should on Linux too. The list of devices is largely derived from: http://wiki.forum.nokia.com/index.php/S60_Platform_and_device_identification_codes http://wiki.forum.nokia.com/index.php/Nokia_USB_Product_IDs and includes only the S60 3rd Edition+ devices documented there. There are many devices for which the USB device ID is not documented, including: Nokia 6290 Nokia E63 Nokia 5630 XpressMusic Nokia 5730 XpressMusic Nokia 6710 Navigator Nokia 6720 classic Nokia 6730 Classic Nokia 6760 slide Nokia 6790 slide Nokia 6790 Surge Nokia E52 Nokia E55 Nokia E71x (AT&T) Nokia E72 Nokia E75 Nokia E75 US+LTA variant Nokia N79 Nokia N86 8MP Nokia 5230 (RM-588) Nokia 5230 (RM-594) Nokia 5530 XpressMusic Nokia 5530 XpressMusic (china) Nokia 5800 XM Nokia N97 (RM-506) Nokia N97 mini Nokia X6 It would be good to add those subsequently. Signed-off-by:
Adrian Taylor <aat@realvnc.com> Acked-by:
Oliver Neukum <oliver@neukum.org> Signed-off-by:
-
Larry Finger authored
In map_urb_for_dma(), the DMA address returned by dma_map_single() is not checked to determine if it is legal. This lack of checking contributed to a problem with the libertas wireless driver (http://marc.info/?l=linux-wireless&m=125695331205062&w=2). The difficulty was not detected until the buffer was unmapped. By this time memory corruption had occurred. The situation is fixed by testing the returned DMA address, and returning -EAGAIN if the address is invalid. Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Anand Gadiyar authored
usb: ehci: Allow EHCI to be built on OMAP3 OMAP3 chips have a built-in EHCI controller. The recently introduced omap ehci-hcd driver missed out on selecting USB_ARCH_HAS_EHCI in Kconfig. Without this, the driver cannot be built. Signed-off-by:
-
