- 26 Jun, 2017 13 commits
-
-
Varun Prakash authored
Assign rxq to TCP connections in round robin mode to use all available rxqs. Signed-off-by:
Varun Prakash <varun@chelsio.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Tyrel Datwyler authored
Signed-off-by:
Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Reviewed-by:
James Smart <james.smart@broadcom.com> Signed-off-by:
-
James Smart authored
A change in remote port removal introduced a spurious put which can cause a premature structure teardown. The affects were most notable when the driver attempted to unload as a null pointer would be hit. Fix by removing the unnecessary put. Signed-off-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
-
James Smart authored
On link down, transport is calling driver to abort outstanding ios. Driver erroneously rejects the abort if the port indicates it isn't logged in - which will be the case after the link down. Thus, the io can't clean up. This prevents reconnection at the transport level. Fix by allowing abort to proceed. Signed-off-by:
-
Paolo Bonzini authored
virtio_scsi tries to do exception handling after the default 30 seconds timeout expires. However, it's better to let the host control the timeout, otherwise with a heavy I/O load it is likely that an abort will also timeout. This leads to fatal errors like filesystems going offline. Disable the 'sd' timeout and allow the host to do exception handling, following the precedent of the storvsc driver. Hannes has a proposal to introduce timeouts in virtio, but this provides an immediate solution for stable kernels too. [mkp: fixed typo] Reported-by:
Douglas Miller <dougmill@linux.vnet.ibm.com> Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Hannes Reinecke <hare@suse.de> Cc: linux-scsi@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Johannes Berg authored
There's no need to use the static UTS_RELEASE string, since utsname()->release contains the same. This avoids rebuilding this file for every change of the release string. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Reviewed-by:
-
Kefeng Wang authored
After commit 556e26a7 ("scsi: remove tsk_mgmt_response and it_nexus_response transport methods"), the target driver support was removed totally. Drop the residual. Signed-off-by:
Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by:
Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by:
-
Varun Prakash authored
Add -ko to the module version similar to module version of other Chelsio drivers. Signed-off-by:
-
Martin K. Petersen authored
Avoid unnecessary snprintf() when formatting variables for display in sysfs and switch to sysfs_match_string() for validating user input. Reviewed-by:
Bart Van Assche <Bart.VanAssche@sandisk.com> Signed-off-by:
-
Christoph Hellwig authored
Since 9c58b395 ("scsi: scsi_devinfo: remove synchronous ALUA for NETAPP devices") this code is unused. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
-
Christoph Hellwig authored
Signed-off-by:
-
Long Li authored
FC disks issue I/O directly to the host storage port driver, this is diffirent to VHD disks where I/O is virtualized and timeout is handled by the host VSP (Virtualization Service Provider). FC disks are usually setup in a multipath system, and they don't want to reset timer on I/O timeout. Timeout is detected by multipath as a good time to failover and recover. Signed-off-by:
Long Li <longli@microsoft.com> Signed-off-by:
-
Colin Ian King authored
The fields sense_data_size and sense_data are unitialized garbage from the stack and are being copied back to userspace. Fix this leak of stack information by ensuring they are zero'd. Detected by CoverityScan, CID#1435473 ("Uninitialized scalar variable") Fixes: 423400e6 ("scsi: aacraid: Include HBA direct interface") Signed-off-by:Colin Ian King <colin.king@canonical.com> Acked-by:
Dave Carroll <david.carroll@microsemi.com> Signed-off-by:
-
- 20 Jun, 2017 27 commits
-
-
James Smart authored
Set lpfc driver revision to 11.4.0.1 Signed-off-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
-
James Smart authored
Beacon OFF from switch is rejected by driver. Driver fails Beacon OFF if frequency is set to 0. As per fc-ls spec, status, capability, frequency and duration fields are only applicable for Beacon ON. Remove frequency and type checks. Reject Beacon ON if duration is non zero. Signed-off-by:
-
James Smart authored
When running nvme detach-ns /dev/nvme0n1 -n 1 command, the nvmet lpfc driver crashes with this stack dump: kernel BUG at /root/NVME/lpfc_8.4/lpfc_sli.c:1393! invalid opcode: 0000 [#1] SMP Workqueue: nvmet-fc-cpu0 nvmet_fc_do_work_on_cpu [nvmet_fc] lpfc_sli4_issue_wqe+0x357/0x440 [lpfc] lpfc_nvmet_xmt_fcp_abort+0x36b/0x5c0 [lpfc] nvmet_fc_abort_op+0x30/0x50 [nvmet_fc] nvmet_fc_do_work_on_cpu+0xd9/0x130 [nvmet_fc] process_one_work+0x14e/0x410 worker_thread+0x116/0x490 kthread+0xc7/0xe0 ret_from_fork+0x3f/0x70 Crash is due to an uninitialized iocbq->vport pointer. Explicitly set the iocbq->vport field to phba->pport in lpfc_nvmet_sol_fcp_issue_abort as it does all abort iocbq initialization in the routine. Using phba->pport is ok because target does not support NPIV instances. Signed-off-by:
-
James Smart authored
During every reset, IOCBs are allocated. So, at one point, number of allocated IOCBs reaches maximum limit and lpfc_sli_next_iotag fails. Allocate IOCBs only during initialization. Reuse them after every reset instead of allocating new set of IOCBs. Signed-off-by:
-
James Smart authored
OS crashes after the completion of firmware download. Failure in posting SCSI SGL buffers because number of SGL buffers is less than total count. Some of the pending IOs are not completed by driver. SGL buffers for these IOs are not added back to the list. Pending IOs are not completed because lpfc_wq_list list is initialized before completion of pending IOs. Postpone lpfc_wq_list reinitialization by moving lpfc_sli4_queue_destroy() after lpfc_hba_down_post(). Signed-off-by:
-
James Smart authored
In a server with an 8G adapter and a 32G adapter, running NVME and FCP, the server would crash with the following stack. RIP: 0010: ... lpfc_nvme_register_port+0x38/0x420 [lpfc] lpfc_nlp_state_cleanup+0x154/0x4f0 [lpfc] lpfc_nlp_set_state+0x9d/0x1a0 [lpfc] lpfc_cmpl_prli_prli_issue+0x35f/0x440 [lpfc] lpfc_disc_state_machine+0x78/0x1c0 [lpfc] lpfc_cmpl_els_prli+0x17c/0x1f0 [lpfc] lpfc_sli_sp_handle_rspiocb+0x39b/0x6b0 [lpfc] lpfc_sli_handle_slow_ring_event_s3+0x134/0x2d0 [lpfc] lpfc_work_done+0x8ac/0x13b0 [lpfc] lpfc_do_work+0xf1/0x1b0 [lpfc] Crash, on the 8G adapter, is due to a vport which does not have a nvme local port structure. It's not supposed to have one. NVME is not supported on the 8G adapter, so the NVME PRLI, which started this flow shouldn't have been sent in the first place. Correct discovery engine to recognize when on an SLI3 rport, which doesn't support SLI3, if the rport supports only NVME, don't send a NVME PRLI. Instead, as no FC4 will be used, a LOGO is sent. If rport is FCP and NVME, only execute the SCSI PRLI. Signed-off-by:
-
James Smart authored
Since unsol rcv ISR and command cmpl ISR both access/lock this list, separate get/put lists will reduce contention. Replaced struct list_head lpfc_nvmet_ctx_list; with struct list_head lpfc_nvmet_ctx_get_list; struct list_head lpfc_nvmet_ctx_put_list; and all correpsonding locks and counters. Signed-off-by:
-
James Smart authored
Removed unnecessary bzero of context area. Due to size of sg list, added a substantial delay and played havoc on cpu caches. Signed-off-by:
-
James Smart authored
Vport creation fails for SLI-3 adapters. Mailbox submission fails because mailbox interrupt is disabled. Mailbox interrupt is disabled during port reset. Do reset only for physical port. Signed-off-by:
-
James Smart authored
First line of nvme_info output is not consistent. There is an Extra colon in the format. First line of output will contain one of the following strings: NVME Initiator Enabled NVME Target Enabled NVME Disabled Signed-off-by:
-
James Smart authored
There is a null pointer dereference that can happen in the FOF interrupt handler. The driver was not setting up cq->assoc_qp_for sli4_hba->oas_cq. Initialize cq->assoc_qp before accessing it. Signed-off-by:
-
Xiang Chen authored
There is a change for abort dev for v3 hw: add registers to configure unaborted iptt for a device, and then inform this to logic. Signed-off-by:
Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by:
John Garry <john.garry@huawei.com> Signed-off-by:
-
Xiang Chen authored
Add code to fill the interface of phy_hard_reset, phy_get_max_linkrate, and phy enable/disable. Signed-off-by:
-
Xiang Chen authored
Add code for interface get_wideport_bitmap. Signed-off-by:
-
Xiang Chen authored
Add code to prepare internal abort command. Signed-off-by:
-
Xiang Chen authored
Add code to itct setup and free for v3 hw. Signed-off-by:
-
Xiang Chen authored
Add code to prepare ATA frame for v3 hw Signed-off-by:
-
Xiang Chen authored
Add code to prepare SMP frame. Signed-off-by:
-
Xiang Chen authored
Add code to prepare SSP frame and deliver it to hardware. Signed-off-by:
-
Xiang Chen authored
Add v3 cq interrupt handler slot_complete_v3_hw(). Note: The slot error handling needs to be further refined in the future to examine all fields in the error record, and handle appropriately, instead of current solution - just report SAS_OPEN_REJECT. Signed-off-by:
-
Xiang Chen authored
Add code to initialise interrupts and add some interrupt handlers. Also add function hisi_sas_v3_destroy_irqs() to clean-up irqs upon module unloading. Signed-off-by:
-
Xiang Chen authored
Add code to configure PHYs for v3 hw. Signed-off-by:
-
Xiang Chen authored
Add code to initialise v3 hardware. Signed-off-by:
-
John Garry authored
Add the code to initialise the controller which is based on pci device in hisi_sas_v3_hw.c The core controller routines are still in hisi_sas_main.c; some common initialisation functions are also exported from hisi_sas_main.c For pci-based controller, the device properties, like phy count and sas address are read from the firmware, same as platform device-based controller. Signed-off-by:
-
John Garry authored
Add skeleton driver for v3 hw in hisi_sas_v3_hw.c File hisi_sas_v3_hw.c will serve 2 purposes: - probing and initialisation of the controller based on pci device - hw layer for v3-based controllers The controller design is quite similar to v2 hw in hip07. However key differences include: -All v2 hw bugs are fixed (hopefully), so workarounds are not required -support for device deregistration -some interrupt modifications -configurable max device support Signed-off-by:
-
John Garry authored
Move the functionality to retrieve the fw info into a dedicated device type-agnostic function, hisi_sas_get_fw_info(). The reasoning is that this function will be required for future pci-based platforms. Also add some debug logs for failure. Signed-off-by:
-
John Garry authored
Since hip08 SAS controller is based on pci device, add hisi_hba.pci_dev for hip08 (will be v3), and also rename hisi_hba.pdev to .platform_dev for clarity. In addition, for common code which wants to reference the controller device struct, add hisi_hba.dev, and change the common code to use it. Signed-off-by:
-
