This driver needs both an irq and dma in order to support async
commands. If the irq and dma are not available the driver will
still function for single analog input reads.

Tidy up the code that does the irq and dma requests so that the
driver will still attach if they are not avaliable. The attach
will still fail, with -ENOMEM, if the dma buffer cannot be allocated.

Remove the noise about the irq and dma during the attach.

Only hook up the async commands support if the irq and dma are
available. Remove the then unnecessary sanity check in a2150_ai_cmd().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed a coding style issue with spaces between function names and arguments:

func (x) -> func(x)
Signed-off-by: Samuel Dominguez <samuel.dominguez.lorenzo@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Correct spelling typo.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

And use the normal is_<foo>_ether_addr functions and ETH_ALEN too.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Tweak some whitespace, also remove a few redundant lines and
characters (mainly of type 'if (status != 0)' -> 'if (status)').
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Get rid of some of the more unhelpful comments.
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There are a large number of TRUEPHY defines in the driver, all of which
are unused or unnecessary. Remove / replace these.

As this results in et1310_phy_access_mii_bit() only being used for
reading bits, also change it's name to et1310_phy_read_mii_bit().
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Several checks for a valid adapter->phydev pointer are made where the
pointer has already been checked previously in the code path.
Remove these redundant checks.
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Negate some 'if' checks to return early, allowing a large block of code
to be un-indented.
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

While Paul said that .uframe_sched should be enabled on the BCM2835,
and doing so works fine with the built-in wired Ethernet, it prevents
my WiFi dongle from operating correctly. Hence, disable the option so
that everything works.
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The patch changes to conditionally compile procfs related source files.
This includes lproc_fid.c, lproc_fld.c, lproc_lov.c, lvfs_lib.c, lproc_mdc.c,
lproc_mgc.c, lprocfs_status.c, lproc_osc.c and sec_lproc.c.

There is a checkpatch warning about usage of simple_strtoul() in the patch.
But it needs to be fixed in a separate patch because it is not related to
CONFIG_PROC_FS breakage here.
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When building Lustre with CONFIG_PROC_FS off, we'll get many errors like:

drivers/staging/lustre/lustre/obdclass/llog_test.c:1053: error: implicit declaration of function ‘lprocfs_llog_test_init_vars’
make[3]: *** [drivers/staging/lustre/lustre/obdclass/llog_test.o] Error 1
make[2]: *** [drivers/staging/lustre/lustre/obdclass] Error 2
make[2]: *** Waiting for unfinished jobs....
  CC [M]  drivers/staging/lustre/lustre/ptlrpc/ptlrpcd.o
drivers/staging/lustre/lustre/ptlrpc/pinger.c: In function ‘ptlrpc_pinger_main’:
drivers/staging/lustre/lustre/ptlrpc/pinger.c:331: error: implicit declaration of function ‘obd_update_maxusage’

The patch defines following symbols when CONFIG_PROC_FS is off:
fld_type_proc_dir, obd_update_maxusage(), obd_max_pages, obd_max_alloc, obd_alloc,
obd_pages, lprocfs_llog_test_init_vars().
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

It exactly copies generic_segment_checks() except wrongly calling
access_ok(VERIFY_READ) for aio read range. Drop it and just call
generic_segment_checks() instead.
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

With CONFIG_FS_POSIX_ACL off, we'll get
drivers/staging/lustre/lustre/llite/xattr.c: In function ‘ll_setxattr_common’:
drivers/staging/lustre/lustre/llite/xattr.c:187:7: error: ‘rce’ undeclared (first use in this function)
drivers/staging/lustre/lustre/llite/xattr.c:187:7: note: each undeclared identifier is reported only once for each function it appears in

It was introduced by 7fc1f831 (staging/lustre/llite: extended attribute cache)
that added new reference but didn't take care of CONFIG_FS_POSIX_ACL.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The irq is only needed to support async commands. Tidy up the
code that does the request_irq() and remove the noise.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The irq is only needed to support async commands. Tidy up the
code that does the request_irq() and remove the noise.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the dev->read_subdev that was setup in the device attach instead
of accessing the dev->subdevices array directly.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The 'len_chanlist' and 'cancel' members of the comedi_subdevice are
only used with async command support. Only initialize them if the irq
was sucessfully requested.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The subdevice 'len_chanlist' member is only used with async command
support. Remove the initialization of this member for the subdevices
that do not support commands. The core will then correctly initialize
it to the default value of '1'.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The subdevice 'len_chanlist' member is only used with async command
support. Remove the initialization of this member for the subdevices
that do not support commands. The core will then correctly initialize
it to the default value of '1'.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the dev->read_subdev that was setup in the device attach instead
of accessing the dev->subdevices array directly.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the private data is a duplicate of the comedi_device
'read_subdev' member. Remove the private data member and use the
comedi_device member instead.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The 'len_chanlist' and 'cancel' members of the comedi_subdevice are
only used with async command support. Only initialize them if the irq
was sucessfully requested.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These kernel messages are just added noise. Remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These functions can only be called if the irq was sucessfully requested.
The dev->irq will always be valid.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the private data is not needed. We can check if
dev->irq is none zero instead. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the dev->read_subdev that was setup in the device attach instead
of accessing the dev->subdevices array directly.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the private data is a duplicate of the comedi_device
'read_subdev' member. Remove the private data member and use the
comedi_device member instead.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The async command support requires an irq. Only initialize the subdevice
command support if the request_irq was successfull.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the private data is not needed. We can check if
dev->irq is none zero instead. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Only set the SDF_CMD_READ subdev_flag if the irq was sucessfully
requested.

Remove the unnecessary sanity check of dev->irq in s626_ai_cmd().
This callback is only hooked up if the irq is available.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Variable u32 numrfd is not necessary in this function.
Signed-off-by: ZHAO Gang <gamerh2o@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change function name from et1310_phy_power_down to et1310_phy_power_switch
to better describe its functionality.
Signed-off-by: ZHAO Gang <gamerh2o@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reapplies part of 9edf0f67 (staging:
lustre: clean up format string usages) as it was reverted in a recent
change to this file.

That proves the big problem of having external trees you have to have
patches flowing back into them from upstream or things break down...
Reported-by: Kees Cook <keescook@chromium.org>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Cc: Peng Tao <bergwolf@gmail.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Don't use DEFINE_PCI_DEVICE_TABLE macro, because this macro
is not preferred.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Traditionally the "get" functions increment the reference count of the
object that is returned, which does not happen with vme_slot_get. The
function vme_slot_get returns the physical VME slot associated with a
particular struct vme_dev. Rename vme_slot_num to avoid any confusion.
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The match function for vme_user is completely wrong. It will blindly bind
against the first VME slot on each bus (at this point that would be just the
first bus as the driver can only handle one bus).

The original intention (before some major subsystem changes) was that the
driver bind against the slot to which the bridge was attached in the VME
system and to the bus(es) provided via the "bus" module parameter.

To do this cleanly (i.e. without poking arround in the subsystems internal
stuctures) a functionality has been added to provide access to the bus
enumeration.
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes the following sparse warning:

drivers/staging/dwc2/core.c:2672:6: warning:
 symbol 'dwc2_set_param_uframe_sched' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>