- 15 Feb, 2011 6 commits
-
-
David S. Miller authored
There was a bug in my commit c978e7bb ("hisax: Fix unchecked alloc_skb() return.") One of the l2->flag checks is wrong. Even worse it turns out I'm duplicating an existing function, so use that instead. Reported-by:
Milton Miller <miltonm@bga.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ian Campbell authored
NETDEV_NOTIFY_PEER is an explicit request by the driver to send a link notification while NETDEV_UP/NETDEV_CHANGEADDR generate link notifications as a sort of side effect. In the later cases the sysctl option is present because link notification events can have undesired effects e.g. if the link is flapping. I don't think this applies in the case of an explicit request from a driver. This patch makes NETDEV_NOTIFY_PEER unconditional, if preferred we could add a new sysctl for this case which defaults to on. This change causes Xen post-migration ARP notifications (which cause switches to relearn their MAC tables etc) to be sent by default. Signed-off-by:
Ian Campbell <ian.campbell@citrix.com> Signed-off-by:
-
Casey Leedom authored
VF Driver should use mailbox command timeout specified in t4fw_interface.h rather than hard-coded value of 500ms. Signed-off-by:
Casey Leedom <leedom@chelsio.com> Signed-off-by:
-
Casey Leedom authored
When a Virtual Machine is rebooted, KVM currently fails to issue a Function Level Reset against any "Attached PCI Devices" (AKA "PCI Passthrough"). In addition to leaving the attached device in a random state in the next booted kernel (which sort of violates the entire idea of a reboot reseting hardware state), this leaves our peer thinking that the link is still up. (Note that a bug has been filed with the KVM folks, #25332, but there's been no response on that as of yet.) So, we add a "->shutdown()" method for the Virtual Function PCI Device to handle administrative shutdowns like a reboot. Signed-off-by:
-
Casey Leedom authored
When CONFIG_DEBUG_FS we get "ERR_PTR()"s back from the debugfs routines instead of NULL. Use the right predicates to check for this. Signed-off-by:
-
Casey Leedom authored
Check module parameter validity in the module initialization routine instead of the PCI Device Probe routine. Signed-off-by:
-
- 14 Feb, 2011 11 commits
-
-
Toshiharu Okada authored
With the specification of hardware, the processing at the time of driver starting was modified. This device write automatically the MAC address read from serial ROM into a MAC Adress1A/1B register at the time of power on reset. However, when stable clock is not supplied, the writing of MAC Adress1A/1B register may not be completed. In this case, it is necessary to load MAC address to MAC Address1A/1B register by the MAC Address1 load register. This patch always does the above processing, in order not to be dependent on system environment. Signed-off-by:
Toshiharu Okada <toshiharu-linux@dsn.okisemi.com> Signed-off-by:
-
David S. Miller authored
Fixes this build warning: drivers/net/wireless/iwlwifi/iwl-3945.c:411:13: warning: 'iwl3945_good_plcp_health' defined but not used As per Johannes Berg. Signed-off-by: -
-
Kurt Van Dijck authored
The statement 'select CAN_SOFTING' may ignore the dependancies for CAN_SOFTING while selecting CAN_SOFTING_CS, as is therefore a bad choice. Signed-off-by:
Kurt Van Dijck <kurt.van.dijck@eia.be> Acked-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
-
Patrick McHardy authored
As noticed by Eric, nf_iterate doesn't use RCU correctly by accessing the prev pointer of a RCU protected list element when a verdict of NF_REPEAT is issued. Fix by jumping backwards to the hook invocation directly instead of loading the previous list element before continuing the list iteration. Reported-by:
Eric Dumazet <eric.dumazet@gmail.com> Acked-by:
Patrick McHardy <kaber@trash.net>
-
Toshiharu Okada authored
This PCH_GBE driver had an issue that the receiving data is not normal. This driver had not removed correctly the padding data which the DMA include in receiving data. This patch fixed this issue. Signed-off-by:
-
Giuseppe Cavallaro authored
This patch enables it by default when the driver starts. This has been required by many people and seems to actually be useful on STB. At any rate, the WoL modes can be selected and turned-on/off by using the ethtool at run-time by users. Signed-off-by:
Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by:
-
Jesper Juhl authored
If alloc_skb() fails to allocate memory and returns NULL then we want to return -ENOMEM from drivers/atm/solos-pci.c::popen() regardless of the value of net_ratelimit(). The way the code is today, we may not return if net_ratelimit() returns 0, then we'll proceed to pass a NULL pointer to skb_put() which will blow up in our face. This patch ensures that we always return -ENOMEM on alloc_skb() failure and only let the dev_warn() be controlled by the value of net_ratelimit(). Signed-off-by:
Jesper Juhl <jj@chaosbits.net> Signed-off-by:
-
Jesper Juhl authored
In drivers/net/usb/hso.c::hso_create_bulk_serial_device() we have this code: ... serial = kzalloc(sizeof(*serial), GFP_KERNEL); if (!serial) goto exit; ... exit: hso_free_tiomget(serial); ... hso_free_tiomget() directly dereferences its argument, which in the example above is a NULL pointer, ouch. I could just add a 'if (serial)' test at the 'exit' label, but since most freeing functions in the kernel accept NULL pointers (and it seems like this was also assumed here) I opted to instead change 'hso_free_tiomget()' so that it is safe to call it with a NULL argument. I also modified the function to get rid of a pointles conditional before the call to 'usb_free_urb()' since that function already tests for NULL itself - besides fixing the NULL deref this change also buys us a few bytes in size. Before: $ size drivers/net/usb/hso.o text data bss dec hex filename 32200 592 9960 42752 a700 drivers/net/usb/hso.o After: $ size drivers/net/usb/hso.o text data bss dec hex filename 32196 592 9960 42748 a6fc drivers/net/usb/hso.o Signed-off-by:
-
David S. Miller authored
Jesper Juhl noticed that l2_pull_iqueue() does not check to see if alloc_skb() fails. Fix this by first trying to reallocate the headroom if necessary, rather than later after we've made hard to undo state changes. Reported-by:
-
- 13 Feb, 2011 3 commits
-
-
Jesper Juhl authored
USB Network driver infrastructure: Fix leak when usb_autopm_get_interface() returns less than zero in kevent(). We'll leak the memory allocated to 'urb' in drivers/net/usb/usbnet.c:kevent() when we 'goto fail_lowmem' and the 'urb' variable goes out of scope while still completely unused. Signed-off-by:
-
Jesper Juhl authored
nla_nest_start() may return NULL. If it does then we'll blow up in nla_nest_end() when we dereference the pointer. Signed-off-by:
-
John Fastabend authored
The app_data priority may not be the same for all net devices. In order for stacks with application notifiers to identify the specific net device dcb_app_type should be passed in the ptr. This allows handlers to use dev_get_by_name() to pin priority to net devices. Signed-off-by:
John Fastabend <john.r.fastabend@intel.com> Signed-off-by:
-
- 12 Feb, 2011 3 commits
-
-
Herbert Xu authored
As it turns out we never need to walk through the list of multicast groups subscribed by the bridge interface itself (the only time we'd want to do that is when we shut down the bridge, in which case we simply walk through all multicast groups), we don't really need to keep an hlist for mp->mglist. This means that we can replace it with just a single bit to indicate whether the bridge interface is subscribed to a group. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Herbert Xu authored
In a couple of spots where we are supposed to modify the port group timer (p->timer) we instead modify the bridge interface group timer (mp->timer). The effect of this is mostly harmless. However, it can cause port subscriptions to be longer than they should be, thus making snooping less effective. Signed-off-by:
-
Herbert Xu authored
The list mp->mglist is used to indicate whether a multicast group is active on the bridge interface itself as opposed to one of the constituent interfaces in the bridge. Unfortunately the operation that adds the mp->mglist node to the list neglected to check whether it has already been added. This leads to list corruption in the form of nodes pointing to itself. Normally this would be quite obvious as it would cause an infinite loop when walking the list. However, as this list is never actually walked (which means that we don't really need it, I'll get rid of it in a subsequent patch), this instead is hidden until we perform a delete operation on the affected nodes. As the same node may now be pointed to by more than one node, the delete operations can then cause modification of freed memory. This was observed in practice to cause corruption in 512-byte slabs, most commonly leading to crashes in jbd2. Thanks to Josef Bacik for pointing me in the right direction. Reported-by:
Ian Page Hands <ihands@redhat.com> Signed-off-by:
-
- 11 Feb, 2011 3 commits
-
-
Steffen Klassert authored
Commit 5811662b ("net: use the macros defined for the members of flowi") accidentally removed the setting of IPPROTO_GRE from the struct flowi in ipgre_tunnel_xmit. This patch restores it. Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Acked-by:
Changli Gao <xiaosuo@gmail.com> Signed-off-by:
-
Hiroaki SHIMODA authored
Commit 80c802f3 (xfrm: cache bundles instead of policies for outgoing flows) introduced possible oopse when dst_alloc returns NULL. Signed-off-by:
Hiroaki SHIMODA <shimoda.hiroaki@gmail.com> Signed-off-by:
-
Randy Dunlap authored
-I (include path) should be specified for host builds. This one was overlooked somehow. Fixes https://bugzilla.kernel.org/show_bug.cgi?id=25902Signed-off-by:
Alexey Salmin <alexey.salmin@gmail.com> Signed-off-by:
-
- 10 Feb, 2011 3 commits
-
-
Bruce Rogers authored
Under harsh testing conditions, including low memory, the guest would stop receiving packets. With this patch applied we no longer see any problems in the driver while performing these tests for extended periods of time. Make sure napi is scheduled subsequent to each napi_enable. Signed-off-by:
Bruce Rogers <brogers@novell.com> Signed-off-by:
Olaf Kirch <okir@suse.de> Cc: stable@kernel.org Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
David S. Miller authored
In x25_link_free(), we destroy 'nb' before dereferencing 'nb->dev'. Don't do this, because 'nb' might be freed by then. Reported-by:
-
Tomoya MORINAGA authored
Previous patch "[PATCH 1/3] pch_can: fix 800k comms issue" is wrong. I should have modified tseg1_min not tseg2_min. This patch reverts tseg2_min to 1 and set tseg1_min to 2. Signed-off-by:
Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by:
-
- 09 Feb, 2011 11 commits
-
-
David S. Miller authored
Some cases try to modify const strings, and in any event the CVS revision strings have not changed in over ten years making these printouts completely worthless. Just kill all of this stuff off. Reported-by:
-
Randy Dunlap authored
From: Randy Dunlap <randy.dunlap@oracle.com> softing_cs.c uses kzalloc & kfree, so it needs to include linux/slab.h. drivers/net/can/softing/softing_cs.c:234: error: implicit declaration of function 'kfree' drivers/net/can/softing/softing_cs.c:271: error: implicit declaration of function 'kzalloc' Signed-off-by:
-
-
Eliad Peller authored
When suspending an associated system, and then resuming, the station vif is being reconfigured without taking the sdata->u.mgd.mtx lock, which results in the following warning: WARNING: at net/mac80211/mlme.c:101 ieee80211_ap_probereq_get+0x58/0xb8 [mac80211]() Modules linked in: wl12xx_sdio wl12xx firmware_class crc7 mac80211 cfg80211 [last unloaded: crc7] Backtrace: [<c005432c>] (dump_backtrace+0x0/0x118) from [<c0376e28>] (dump_stack+0x20/0x24) r7:00000000 r6:bf12d6ec r5:bf154aac r4:00000065 [<c0376e08>] (dump_stack+0x0/0x24) from [<c0079104>] (warn_slowpath_common+0x5c/0x74) [<c00790a8>] (warn_slowpath_common+0x0/0x74) from [<c0079148>] (warn_slowpath_null+0x2c/0x34) r9:000024ff r8:cd006460 r7:00000001 r6:00000000 r5:00000000 r4:cf1394a0 [<c007911c>] (warn_slowpath_null+0x0/0x34) from [<bf12d6ec>] (ieee80211_ap_probereq_get+0x58/0xb8 [mac80211]) [<bf12d694>] (ieee80211_ap_probereq_get+0x0/0xb8 [mac80211]) from [<bf19cd04>] (wl1271_cmd_build_ap_probe_req+0x30/0xf8 [wl12xx]) r4:cd007440 [<bf19ccd4>] (wl1271_cmd_build_ap_probe_req+0x0/0xf8 [wl12xx]) from [<bf1995f4>] (wl1271_op_bss_info_changed+0x4c4/0x808 [wl12xx]) r5:cd007440 r4:000003b4 [<bf199130>] (wl1271_op_bss_info_changed+0x0/0x808 [wl12xx]) from [<bf122168>] (ieee80211_bss_info_change_notify+0x1a4/0x1f8 [mac80211]) [<bf121fc4>] (ieee80211_bss_info_change_notify+0x0/0x1f8 [mac80211]) from [<bf141e80>] (ieee80211_reconfig+0x4d0/0x668 [mac80211]) r8:cf0eeea4 r7:cd00671c r6:00000000 r5:cd006460 r4:cf1394a0 [<bf1419b0>] (ieee80211_reconfig+0x0/0x668 [mac80211]) from [<bf137dd4>] (ieee80211_resume+0x60/0x70 [mac80211]) [<bf137d74>] (ieee80211_resume+0x0/0x70 [mac80211]) from [<bf0eb930>] (wiphy_resume+0x6c/0x7c [cfg80211]) r5:cd006248 r4:cd006110 [<bf0eb8c4>] (wiphy_resume+0x0/0x7c [cfg80211]) from [<c0241024>] (legacy_resume+0x38/0x70) r7:00000000 r6:00000000 r5:cd006248 r4:cd0062fc [<c0240fec>] (legacy_resume+0x0/0x70) from [<c0241478>] (device_resume+0x168/0x1a0) r8:c04ca8d8 r7:cd00627c r6:00000010 r5:cd006248 r4:cd0062fc [<c0241310>] (device_resume+0x0/0x1a0) from [<c0241600>] (dpm_resume_end+0xf8/0x3bc) r7:00000000 r6:00000005 r5:cd006248 r4:cd0062fc [<c0241508>] (dpm_resume_end+0x0/0x3bc) from [<c00b2a24>] (suspend_devices_and_enter+0x1b0/0x204) [<c00b2874>] (suspend_devices_and_enter+0x0/0x204) from [<c00b2b68>] (enter_state+0xf0/0x148) r7:c037e978 r6:00000003 r5:c043d807 r4:00000000 [<c00b2a78>] (enter_state+0x0/0x148) from [<c00b20a4>] (state_store+0xa4/0xcc) r7:c037e978 r6:00000003 r5:00000003 r4:c043d807 [<c00b2000>] (state_store+0x0/0xcc) from [<c01fc90c>] (kobj_attr_store+0x20/0x24) [<c01fc8ec>] (kobj_attr_store+0x0/0x24) from [<c0157120>] (sysfs_write_file+0x11c/0x150) [<c0157004>] (sysfs_write_file+0x0/0x150) from [<c0100f84>] (vfs_write+0xc0/0x14c) [<c0100ec4>] (vfs_write+0x0/0x14c) from [<c01010e4>] (sys_write+0x4c/0x78) r8:40126000 r7:00000004 r6:cf1a7c80 r5:00000000 r4:00000000 [<c0101098>] (sys_write+0x0/0x78) from [<c00500c0>] (ret_fast_syscall+0x0/0x30) r8:c00502c8 r7:00000004 r6:403525e8 r5:40126000 r4:00000004 Signed-off-by:
Eliad Peller <eliad@wizery.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Stanislaw Gruszka authored
Patch fixes: https://bugzilla.redhat.com/show_bug.cgi?id=654599 Many users report very low speed problem on 3945 devices, this patch fixes problem, but only for some of them. For unknown reason, sometimes after hw scanning, device is not able to receive frames at high rate. Since plcp health check may request hw scan to "reset radio", performance problem start to be observable after update kernel to .35, where plcp check was introduced. Bug reporter confirmed that removing plcp check fixed problem for him. Reported-and-tested-by:
SilvioTO <silviotoya@yahoo.it> Cc: stable@kernel.org # 2.6.35+ Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Acked-by:
Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by:
-
-
Toshiharu Okada authored
This driver will be in a deadlock, When the rx offload is set by ethtool. The pch_gbe_reinit_locked function was modified. Signed-off-by:
-
Pablo Neira Ayuso authored
The TCP tracking code has a special case that allows to return NF_REPEAT if we receive a new SYN packet while in TIME_WAIT state. In this situation, the TCP tracking code destroys the existing conntrack to start a new clean session. [DESTROY] tcp 6 src=192.168.0.2 dst=192.168.1.2 sport=38925 dport=8000 src=192.168.1.2 dst=192.168.1.100 sport=8000 dport=38925 [ASSURED] [NEW] tcp 6 120 SYN_SENT src=192.168.0.2 dst=192.168.1.2 sport=38925 dport=8000 [UNREPLIED] src=192.168.1.2 dst=192.168.1.100 sport=8000 dport=38925 However, this is a problem for the iptables' CT target event filtering which will not work in this case since the conntrack template will not be there for the new session. To fix this, we reassign the conntrack template to the packet if we return NF_REPEAT. Signed-off-by:Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Tomoya authored
Currently, in case reload pch_can, pch_can not to be able to catch interrupt. The cause is bus-master is not set in pch_can. Thus, add enabling bus-master processing. Signed-off-by:
-
Tomoya authored
Currently, when rmmod pch_can, kernel failure occurs. The cause is pci_iounmap executed before pch_can_reset. Thus pci_iounmap moves after pch_can_reset. Signed-off-by:
-
Tomoya authored
Currently, 800k comms fails since prop_seg set zero. (EG20T PCH CAN register of prop_seg must be set more than 1) To prevent prop_seg set to zero, change tseg2_min 1 to 2. Signed-off-by:
-
