- 06 Jul, 2018 32 commits
-
-
Chris Wilson authored
In the next patch, we will want to start skipping requests on failing to complete their payloads. So export the utility function current used to make requests inoperable following a failed gpu reset. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180706103947.15919-2-chris@chris-wilson.co.uk
-
Chris Wilson authored
Currently all callers are responsible for adding the vma to the active timeline and then exporting its fence. Combine the two operations into i915_vma_move_to_active() to move all the extra handling from the callers to the single site. Signed-off-by:
-
Chris Wilson authored
We always want to use a virtual address (i.e. use the GTT) for MI_STORE_DWORD_IMM, but forgot the ever so important flag in live_hangcheck for gen3. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180706142323.25699-2-chris@chris-wilson.co.uk
-
Chris Wilson authored
Replace the magic bit with the proper symbolic name for instructing MI_STORE_DWORD_IMM to use a virtual address (on gen3) or the global GTT address (still virtual!) on gen4+. Signed-off-by:
-
Chris Wilson authored
Limit the GTT size we try and allocate to ensure that it fits within RAM and does not trigger the oomkiller indiscriminately. Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180706125338.24432-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
We already maually control the CPU cache for our page table directories, so we can tell the dma mapper to skip doing it as well. Signed-off-by:
-
Chris Wilson authored
As we propagate back the error to the caller for them to handle, we do not need the lowest level spitting out a redundant warning upon an allocation failure inside dma_map_page(). Signed-off-by:
-
Chris Wilson authored
If we have just completed a WC write, we must ensure that the WCB (Write Combining Buffer) is flushed out to main memory before we can expect to see the results. This is especially important when mixing WC with GTT as the physical paths are different and cachelines are not naturally flushed. Testcase: igt/drv_selftests/live_coherency #gdg Signed-off-by:
-
Chris Wilson authored
If the GPU is irrecoverably wedged, we can not execute any requests making testing execlists (request execution) pointless. Skip! Signed-off-by:
-
Chris Wilson authored
If the HW (or driver) doesn't support logical contexts, don't pretend we gain anything from trying to execute GPU commands with them. At best it reports -ENODEV, which is an unhelpful failure that we should just skip. v2: Be more specific and check the driver/engine caps for logical (HW) context support. Signed-off-by:
-
Chris Wilson authored
Avoid looking at the magical engines[RCS] to decide if the HW and driver supports logical contexts, and instead record that knowledge during initialisation. Signed-off-by:
-
Imre Deak authored
We can simplify the encoder's get_power_domains() hook by calling it only if the encoder is active. That way the hook can return its power domains unconditionally without checking the active state by calling encoder::get_hw_state(). This get_hw_state() query is in fact redundant since it's already done by intel_modeset_readout_hw_state() setting the encoder's crtc or leaving it NULL accordingly. Let's use this fact to decide if the encoder is active. While at it clarify the comment in intel_ddi_get_power_domains() about primary vs. fake MST encoders and make sure we never do an incorrect encoder->dig_port cast for fake MST encoders. Suggested-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
-
Maarten Lankhorst authored
This interface is deprecated, and has been replaced by the upstream drm crc interface. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Tomi Sarvela <tomi.p.sarvela@intel.com> Cc: Petri Latvala <petri.latvala@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180628072303.14175-1-maarten.lankhorst@linux.intel.com
-
Chris Wilson authored
If the GPU is terminally wedged we cannot submit any requests into a context, completely unfulfilling our purpose of doing so. As this expectedly fails, skip over the test. Signed-off-by:
-
Chris Wilson authored
We test the GPU handling of huge pages by submitting requests that write into a huge page, but if the GPU is irrecoverably wedged we cannot submit any requests. As the test expectedly fails, skip over it. Signed-off-by:
-
Chris Wilson authored
If the GPU is irrecoverably wedged, we cannot submit any requests and so cannot make the GTT busy in order to test evicting active objects. As this expectedly fails, skip over the test. Signed-off-by:
-
Chris Wilson authored
If the GPU is irrecoverably wedged, we cannot submit any request and therefore cannot query the register state of the context (which is done using the GPU command stream). So skip over the test as it expectedly fails. Signed-off-by:
-
Chris Wilson authored
If the GPU is irrecoverably wedge, we cannot submit any request and so all of the request selftests will expectedly fail. Skip over them. Signed-off-by:
-
Chris Wilson authored
If the GPU is wedged, we cannot make the object busy as trying to submit a request will generate -EIO. Skip to the end of the test. Signed-off-by:
-
Chris Wilson authored
If the GPU is irrecoverably broken, we can not use it to dirty memory and check for cache coherency with the CPU. All we can do is simply skip over the GPU subtests and focus on the CPU domains (WC, WB) cache management. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107127Signed-off-by:
-
Chris Wilson authored
As we keep VMA around until the object is destroyed, when testing partial tiling we instantiate many, many VMA (as the object is huge allowing for many different partial regions). We test elsewhere our handling of populating large objects with a full set of VMA and checking we can retrieve them afterwards, but in this test we incur the cost of flushing all VMA after every GTT write, dramatically slowing down the test. References: https://bugs.freedesktop.org/show_bug.cgi?id=107130Signed-off-by:
-
Chris Wilson authored
Having found the error causing the IGT test to fail, downgrade the verbose logging so that we stop flooding the syslogs as we deliberately provoke it many thousands of time during selftests. References: 10195b1e ("drm/i915: Show vma allocator stack when in doubt") Signed-off-by:
-
Madhav Chauhan authored
This patch defines AUX lane registers for PORT_PCS_DW1, PORT_TX_DW2, PORT_TX_DW4, PORT_TX_DW5 used during dsi enabling. v2: Review comments from Jani N: - Define _ICL_PORT_PCS_DW1_AUX_A for consistency - Three spaces for bitfield definition. Signed-off-by:Madhav Chauhan <madhav.chauhan@intel.com> Reviewed-by:
-
Madhav Chauhan authored
To save power, unused lanes should be powered down using the bitfield of PORT_CL_DW10. v2: Review comments from Jani N - Put default label next to case 4 - Include the shifts in the macros Signed-off-by: -
Madhav Chauhan authored
This register used to power down individual lanes for DDI/DSI ports. Bitfields to power up/down various combinations of lanes are also added in this patch. v2: Review comments from Jani N - Use override instead of "override" for bitfields - Define mask for override bitfield - Define PWR_DOWN_LN* macros shifted in place v3: Correct PWR_DOWN_LN_MASK value (Jani N) Signed-off-by: -
Madhav Chauhan authored
This patch configures mode of operation for DSI and enable DDI IO power by configuring power well. v2: Use for_each_dsi_port() for power get (Jani N) Signed-off-by:
-
Madhav Chauhan authored
This patch defines DSI IO mode control register and it's bits used while enabling IO power for DSI. Signed-off-by:
-
Madhav Chauhan authored
Escape Clock is used for LP communication across the DSI Link. To achieve the constant frequency of the escape clock from the variable DPLL frequency output, a variable divider(M) is needed. This patch programs the same. v2: (Jani N) Don't end line with "(". Signed-off-by: -
Jani Nikula authored
Use the more customary order of latest platform first, and don't bother with an if in the last branch. Cc: Madhav Chauhan <madhav.chauhan@intel.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Jani Nikula authored
Avoid confusion with the functions to be added for the new ICL or gen 11 DSI implementation by renaming the current DSI functions. While at it, permutate the words in the function names to make them all start with "vlv_dsi" or "vlv_dsi_pll" etc. Reduce the platform abstractions in the PLL file while at it, moving the checks to vlv_dsi.c instead, where we typically already have the necessary if ladders. Leave the static functions as-is for now; they could be renamed later if needed. No functional changes. v2: use "gen7" prefix. v3: use "vlv" and "bxt" prefixes, reduce the abstractions. References: https://patchwork.freedesktop.org/series/44823/ Cc: Madhav Chauhan <madhav.chauhan@intel.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Jani Nikula authored
Starting from ICL or gen 11 we have a new DSI block which requires completely different programming from the current implementation. Having them in the same file would be confusing. Rename the current DSI and DSI PLL implementation files as vlv_dsi.c and vlv_dsi_pll.c. No functional changes. v2: use "gen7" prefix. v3: use "vlv" prefix. References: https://patchwork.freedesktop.org/series/44823/ Cc: Madhav Chauhan <madhav.chauhan@intel.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Chris Wilson authored
If the GPU is irrecoverably wedged on startup, it means that it failed on initialisation and we have already tried to reset it but failed. We can ignore all further testing, as it is already dead. Failing early, prevents us from slowly failing in our endeavours later and timing out. Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180705150214.28316-1-chris@chris-wilson.co.uk
-
- 05 Jul, 2018 8 commits
-
-
Chris Wilson authored
i915_gem_detect_bit_6_swizzle() tries to hide unknown swizzling from userspace (and ourselves) leaving us with the only clue inside i915->quirks & QUIRK_PIN_SWIZZLED_PAGES. If we see this bit set, it means that we really have no clue as to what the swizzle pattern is being used in any one page and so cannot compute what the reference value should be in our tiling selftests. We have to skip the test. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107133Signed-off-by:
-
Ville Syrjälä authored
The return value is a bool so we can just return the result of the biwise AND. The compiler will take care of the rest. Signed-off-by:
-
Chris Wilson authored
There's no magic bit0 in MI_BB_START for gen3, it's the same dword length parameter as elsewhere and needs to be zero. v2: Same bug in both live_requests and live_hanghcheck. References: https://bugs.freedesktop.org/show_bug.cgi?id=107132Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 141432 Addresses-Coverity-ID: 141433 Addresses-Coverity-ID: 141434 Addresses-Coverity-ID: 141435 Addresses-Coverity-ID: 141436 Addresses-Coverity-ID: 1357360 Addresses-Coverity-ID: 1357403 Addresses-Coverity-ID: 1357433 Addresses-Coverity-ID: 1392622 Addresses-Coverity-ID: 1415273 Addresses-Coverity-ID: 1435752 Addresses-Coverity-ID: 1441500 Addresses-Coverity-ID: 1454596 Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Madhav Chauhan authored
This patch adds the new registers and corresponding bit definitions which will be used for programming/enable DSI PLL. v2: Review comments from Jani N - Fix spaces while defining ICL_ESC_CLK_DIV_MASK - Define shift and mask for bitfields. Signed-off-by: -
Chris Wilson authored
Use i915_address_space_init() rather than open-code it inside mock_ppgtt() as we will forget to keep it in sync. Signed-off-by:
-
Chris Wilson authored
We can now use the full release mechanism (i915_ppgtt_put) for our local ppgtt allocation in igt_ppgtt_alloc. Signed-off-by:
-
Chris Wilson authored
No longer used and can be removed. One less global that currently demands struct_mutex protection. References: e9e7dc41 ("drm/i915/gtt: Make gen6 page directories evictable") Signed-off-by:
-
