- 06 Jul, 2016 1 commit
-
-
Purushottam Kushwaha authored
No support for pbss results in a memory leak for the acl_data (if parse_acl_data succeeds). Fix this by moving the ACL parsing later. Cc: stable@vger.kernel.org Fixes: 34d50519 ("cfg80211: basic support for PBSS network type") Signed-off-by:
Purushottam Kushwaha <pkushwah@qti.qualcomm.com> Signed-off-by:
Johannes Berg <johannes@sipsolutions.net>
-
- 29 Jun, 2016 1 commit
-
-
Felix Fietkau authored
The PDU length of incoming LLC frames is set to the total skb payload size in __ieee80211_data_to_8023() of net/wireless/util.c which incorrectly includes the length of the IEEE 802.11 header. The resulting LLC frame header has a too large PDU length, causing the llc_fixup_skb() function of net/llc/llc_input.c to reject the incoming skb, effectively breaking STP. Solve the problem by properly substracting the IEEE 802.11 frame header size from the PDU length, allowing the LLC processor to pick up the incoming control messages. Special thanks to Gerry Rozema for tracking down the regression and proposing a suitable patch. Fixes: 2d1c304c ("cfg80211: add function for 802.3 conversion with separate output buffer") Cc: stable@vger.kernel.org Reported-by:
Gerry Rozema <gerryr@rozeware.com> Signed-off-by:
Felix Fietkau <nbd@nbd.name> Signed-off-by:
-
- 28 Jun, 2016 1 commit
-
-
Jouni Malinen authored
If a user space program (e.g., wpa_supplicant) deletes a STA entry that is currently in NL80211_PLINK_ESTAB state, the number of established plinks counter was not decremented and this could result in rejecting new plink establishment before really hitting the real maximum plink limit. For !user_mpm case, this decrementation is handled by mesh_plink_deactive(). Fix this by decrementing estab_plinks on STA deletion (mesh_sta_cleanup() gets called from there) so that the counter has a correct value and the Beacon frame advertisement in Mesh Configuration element shows the proper value for capability to accept additional peers. Cc: stable@vger.kernel.org Signed-off-by:
Jouni Malinen <j@w1.fi> Signed-off-by:
-
- 09 Jun, 2016 2 commits
-
-
Prasun Maiti authored
iwpriv app uses iw_point structure to send data to Kernel. The iw_point structure holds a pointer. For compatibility Kernel converts the pointer as required for WEXT IOCTLs (SIOCIWFIRST to SIOCIWLAST). Some drivers may use iw_handler_def.private_args to populate iwpriv commands instead of iw_handler_def.private. For those case, the IOCTLs from SIOCIWFIRSTPRIV to SIOCIWLASTPRIV will follow the path ndo_do_ioctl(). Accordingly when the filled up iw_point structure comes from 32 bit iwpriv to 64 bit Kernel, Kernel will not convert the pointer and sends it to driver. So, the driver may get the invalid data. The pointer conversion for the IOCTLs (SIOCIWFIRSTPRIV to SIOCIWLASTPRIV), which follow the path ndo_do_ioctl(), is mandatory. This patch adds pointer conversion from 32 bit to 64 bit and vice versa, if the ioctl comes from 32 bit iwpriv to 64 bit Kernel. Cc: stable@vger.kernel.org Signed-off-by:
Prasun Maiti <prasunmaiti87@gmail.com> Signed-off-by:
Ujjal Roy <royujjal@gmail.com> Tested-by:
Dibyajyoti Ghosh <dibyajyotig@gmail.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Johannes Berg authored
Since set_tx_power and set_antenna are frequently implemented without the matching get_tx_power/get_antenna, we shouldn't have added warnings for those. Remove them. The remaining ones are correct and need to be implemented symmetrically for correct operation. Cc: stable@vger.kernel.org Fixes: de3bb771 ("cfg80211: add more warnings for inconsistent ops") Signed-off-by:
-
- 31 May, 2016 3 commits
-
-
Felix Fietkau authored
The header field is defined as u8[] but also accessed as struct ieee80211_hdr. Enforce an alignment of 2 to prevent unnecessary unaligned accesses, which can be very harmful for performance on many platforms. Fixes: e495c247 ("mac80211: extend fast-xmit for more ciphers") Cc: stable@vger.kernel.org Signed-off-by:
-
Bob Copeland authored
Currently, the mesh paths associated with a nexthop station are cleaned up in the following code path: __sta_info_destroy_part1 synchronize_net() __sta_info_destroy_part2 -> cleanup_single_sta -> mesh_sta_cleanup -> mesh_plink_deactivate -> mesh_path_flush_by_nexthop However, there are a couple of problems here: 1) the paths aren't flushed at all if the MPM is running in userspace (e.g. when using wpa_supplicant or authsae) 2) there is no synchronize_rcu between removing the path and readers accessing the nexthop, which means the following race is possible: CPU0 CPU1 ~~~~ ~~~~ sta_info_destroy_part1() synchronize_net() rcu_read_lock() mesh_nexthop_resolve() mpath = mesh_path_lookup() [...] -> mesh_path_flush_by_nexthop() sta = rcu_dereference( mpath->next_hop) kfree(sta) access sta <-- CRASH Fix both of these by unconditionally flushing paths before destroying the sta, and by adding a synchronize_net() after path flush to ensure no active readers can still dereference the sta. Fixes this crash: [ 348.529295] BUG: unable to handle kernel paging request at 00020040 [ 348.530014] IP: [<f929245d>] ieee80211_mps_set_frame_flags+0x40/0xaa [mac80211] [ 348.530014] *pde = 00000000 [ 348.530014] Oops: 0000 [#1] PREEMPT [ 348.530014] Modules linked in: drbg ansi_cprng ctr ccm ppp_generic slhc ipt_MASQUERADE nf_nat_masquerade_ipv4 8021q ] [ 348.530014] CPU: 0 PID: 20597 Comm: wget Tainted: G O 4.6.0-rc5-wt=V1 #1 [ 348.530014] Hardware name: To Be Filled By O.E.M./To be filled by O.E.M., BIOS 080016 11/07/2014 [ 348.530014] task: f64fa280 ti: f4f9c000 task.ti: f4f9c000 [ 348.530014] EIP: 0060:[<f929245d>] EFLAGS: 00010246 CPU: 0 [ 348.530014] EIP is at ieee80211_mps_set_frame_flags+0x40/0xaa [mac80211] [ 348.530014] EAX: f4ce63e0 EBX: 00000088 ECX: f3788416 EDX: 00020008 [ 348.530014] ESI: 00000000 EDI: 00000088 EBP: f6409a4c ESP: f6409a40 [ 348.530014] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068 [ 348.530014] CR0: 80050033 CR2: 00020040 CR3: 33190000 CR4: 00000690 [ 348.530014] Stack: [ 348.530014] 00000000 f4ce63e0 f5f9bd80 f6409a64 f9291d80 0000ce67 f5d51e00 f4ce63e0 [ 348.530014] f3788416 f6409a80 f9291dc1 f4ce8320 f4ce63e0 f5d51e00 f4ce63e0 f4ce8320 [ 348.530014] f6409a98 f9277f6f 00000000 00000000 0000007c 00000000 f6409b2c f9278dd1 [ 348.530014] Call Trace: [ 348.530014] [<f9291d80>] mesh_nexthop_lookup+0xbb/0xc8 [mac80211] [ 348.530014] [<f9291dc1>] mesh_nexthop_resolve+0x34/0xd8 [mac80211] [ 348.530014] [<f9277f6f>] ieee80211_xmit+0x92/0xc1 [mac80211] [ 348.530014] [<f9278dd1>] __ieee80211_subif_start_xmit+0x807/0x83c [mac80211] [ 348.530014] [<c04df012>] ? sch_direct_xmit+0xd7/0x1b3 [ 348.530014] [<c022a8c6>] ? __local_bh_enable_ip+0x5d/0x7b [ 348.530014] [<f956870c>] ? nf_nat_ipv4_out+0x4c/0xd0 [nf_nat_ipv4] [ 348.530014] [<f957e036>] ? iptable_nat_ipv4_fn+0xf/0xf [iptable_nat] [ 348.530014] [<c04c6f45>] ? netif_skb_features+0x14d/0x30a [ 348.530014] [<f9278e10>] ieee80211_subif_start_xmit+0xa/0xe [mac80211] [ 348.530014] [<c04c769c>] dev_hard_start_xmit+0x1f8/0x267 [ 348.530014] [<c04c7261>] ? validate_xmit_skb.isra.120.part.121+0x10/0x253 [ 348.530014] [<c04defc6>] sch_direct_xmit+0x8b/0x1b3 [ 348.530014] [<c04c7a9c>] __dev_queue_xmit+0x2c8/0x513 [ 348.530014] [<c04c7cfb>] dev_queue_xmit+0xa/0xc [ 348.530014] [<f91bfc7a>] batadv_send_skb_packet+0xd6/0xec [batman_adv] [ 348.530014] [<f91bfdc4>] batadv_send_unicast_skb+0x15/0x4a [batman_adv] [ 348.530014] [<f91b5938>] batadv_dat_send_data+0x27e/0x310 [batman_adv] [ 348.530014] [<f91c30b5>] ? batadv_tt_global_hash_find.isra.11+0x8/0xa [batman_adv] [ 348.530014] [<f91b63f3>] batadv_dat_snoop_outgoing_arp_request+0x208/0x23d [batman_adv] [ 348.530014] [<f91c0cd9>] batadv_interface_tx+0x206/0x385 [batman_adv] [ 348.530014] [<c04c769c>] dev_hard_start_xmit+0x1f8/0x267 [ 348.530014] [<c04c7261>] ? validate_xmit_skb.isra.120.part.121+0x10/0x253 [ 348.530014] [<c04defc6>] sch_direct_xmit+0x8b/0x1b3 [ 348.530014] [<c04c7a9c>] __dev_queue_xmit+0x2c8/0x513 [ 348.530014] [<f80cbd2a>] ? igb_xmit_frame+0x57/0x72 [igb] [ 348.530014] [<c04c7cfb>] dev_queue_xmit+0xa/0xc [ 348.530014] [<f843a326>] br_dev_queue_push_xmit+0xeb/0xfb [bridge] [ 348.530014] [<f843a35f>] br_forward_finish+0x29/0x74 [bridge] [ 348.530014] [<f843a23b>] ? deliver_clone+0x3b/0x3b [bridge] [ 348.530014] [<f843a714>] __br_forward+0x89/0xe7 [bridge] [ 348.530014] [<f843a336>] ? br_dev_queue_push_xmit+0xfb/0xfb [bridge] [ 348.530014] [<f843a234>] deliver_clone+0x34/0x3b [bridge] [ 348.530014] [<f843a68b>] ? br_flood+0x95/0x95 [bridge] [ 348.530014] [<f843a66d>] br_flood+0x77/0x95 [bridge] [ 348.530014] [<f843a809>] br_flood_forward+0x13/0x1a [bridge] [ 348.530014] [<f843a68b>] ? br_flood+0x95/0x95 [bridge] [ 348.530014] [<f843b877>] br_handle_frame_finish+0x392/0x3db [bridge] [ 348.530014] [<c04e9b2b>] ? nf_iterate+0x2b/0x6b [ 348.530014] [<f843baa6>] br_handle_frame+0x1e6/0x240 [bridge] [ 348.530014] [<f843b4e5>] ? br_handle_local_finish+0x6a/0x6a [bridge] [ 348.530014] [<c04c4ba0>] __netif_receive_skb_core+0x43a/0x66b [ 348.530014] [<f843b8c0>] ? br_handle_frame_finish+0x3db/0x3db [bridge] [ 348.530014] [<c023cea4>] ? resched_curr+0x19/0x37 [ 348.530014] [<c0240707>] ? check_preempt_wakeup+0xbf/0xfe [ 348.530014] [<c0255dec>] ? ktime_get_with_offset+0x5c/0xfc [ 348.530014] [<c04c4fc1>] __netif_receive_skb+0x47/0x55 [ 348.530014] [<c04c57ba>] netif_receive_skb_internal+0x40/0x5a [ 348.530014] [<c04c61ef>] napi_gro_receive+0x3a/0x94 [ 348.530014] [<f80ce8d5>] igb_poll+0x6fd/0x9ad [igb] [ 348.530014] [<c0242bd8>] ? swake_up_locked+0x14/0x26 [ 348.530014] [<c04c5d29>] net_rx_action+0xde/0x250 [ 348.530014] [<c022a743>] __do_softirq+0x8a/0x163 [ 348.530014] [<c022a6b9>] ? __hrtimer_tasklet_trampoline+0x19/0x19 [ 348.530014] [<c021100f>] do_softirq_own_stack+0x26/0x2c [ 348.530014] <IRQ> [ 348.530014] [<c022a957>] irq_exit+0x31/0x6f [ 348.530014] [<c0210eb2>] do_IRQ+0x8d/0xa0 [ 348.530014] [<c058152c>] common_interrupt+0x2c/0x40 [ 348.530014] Code: e7 8c 00 66 81 ff 88 00 75 12 85 d2 75 0e b2 c3 b8 83 e9 29 f9 e8 a7 5f f9 c6 eb 74 66 81 e3 8c 005 [ 348.530014] EIP: [<f929245d>] ieee80211_mps_set_frame_flags+0x40/0xaa [mac80211] SS:ESP 0068:f6409a40 [ 348.530014] CR2: 0000000000020040 [ 348.530014] ---[ end trace 48556ac26779732e ]--- [ 348.530014] Kernel panic - not syncing: Fatal exception in interrupt [ 348.530014] Kernel Offset: disabled Cc: stable@vger.kernel.org Reported-by:Fred Veldini <fred.veldini@gmail.com> Tested-by:
Bob Copeland <me@bobcopeland.com> Signed-off-by:
-
Martin Willi authored
A wmediumd that does not send this attribute causes a NULL pointer dereference, as the attribute is accessed even if it does not exist. The attribute was required but never checked ever since userspace frame forwarding has been introduced. The issue gets more problematic once we allow wmediumd registration from user namespaces. Cc: stable@vger.kernel.org Fixes: 7882513b ("mac80211_hwsim driver support userspace frame tx/rx") Signed-off-by:
Martin Willi <martin@strongswan.org> Signed-off-by:
-
- 30 May, 2016 9 commits
-
-
Shmulik Ladkani authored
l2tp_ip6 tunnel and session lookups were still using init_net, although the l2tp core infrastructure already supports lookups keyed by 'net'. As a result, l2tp_ip6_recv discarded packets for tunnels/sessions created in namespaces other than the init_net. Fix, by using dev_net(skb->dev) or sock_net(sk) where appropriate. Signed-off-by:
Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Garver authored
Clarify how secure_redirects works. Mention that RFC1122 always applies. Signed-off-by:
Eric Garver <e@erig.me> Signed-off-by:
-
Edward Cree authored
Signed-off-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
-
Baozeng Ding authored
Fix a logic error to avoid potential null pointer dereference. Signed-off-by:
Baozeng Ding <sploving1@gmail.com> Reviewed-by: Stefan Schmidt<stefan@osg.samsung.com> Signed-off-by:
-
Elad Kanfi authored
Since NAPI works by shutting down event interrupts when theres work and turning them on when theres none, the net driver must make sure that interrupts are disabled when it reschedules polling. By calling napi_reschedule, the driver switches to polling mode, therefor there should be no interrupt interference. Any received packets will be handled in nps_enet_poll by polling the HW indication of received packet until all packets are handled. Signed-off-by:
Elad Kanfi <eladkan@mellanox.com> Acked-by:
Noam Camus <noamca@mellanox.com> Tested-by:
Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by:
-
Andy Shevchenko authored
Use %*ph specifier to dump small buffers in hex format instead doing this byte-by-byte. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Dan Carpenter authored
If we pass ERR_PTR(-EFAULT) to kfree() then it's going to oops. Fixes: 2ece068e ('ptp: use memdup_user().') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Arnd Bergmann authored
A previous patch added the fou6.ko module, but that failed to link in a couple of configurations: net/built-in.o: In function `ip6_tnl_encap_add_fou_ops': net/ipv6/fou6.c:88: undefined reference to `ip6_tnl_encap_add_ops' net/ipv6/fou6.c:94: undefined reference to `ip6_tnl_encap_add_ops' net/ipv6/fou6.c:97: undefined reference to `ip6_tnl_encap_del_ops' net/built-in.o: In function `ip6_tnl_encap_del_fou_ops': net/ipv6/fou6.c:106: undefined reference to `ip6_tnl_encap_del_ops' net/ipv6/fou6.c:107: undefined reference to `ip6_tnl_encap_del_ops' If CONFIG_IPV6=m, ip6_tnl_encap_add_ops/ip6_tnl_encap_del_ops are in a module, but fou6.c can still be built-in, and that obviously fails to link. Also, if CONFIG_IPV6=y, but CONFIG_IPV6_TUNNEL=m or CONFIG_IPV6_TUNNEL=n, the same problem happens for a different reason. This adds two new silent Kconfig symbols to work around both problems: - CONFIG_IPV6_FOU is now always set to 'm' if either CONFIG_NET_FOU=m or CONFIG_IPV6=m - CONFIG_IPV6_FOU_TUNNEL is set implicitly when IPV6_FOU is enabled and NET_FOU_IP_TUNNELS is also turned out, and it will ensure that CONFIG_IPV6_TUNNEL is also available. The options could be made user-visible as well, to give additional room for configuration, but it seems easier not to bother users with more choice here. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: aa3463d6 ("fou: Add encap ops for IPv6 tunnels") Signed-off-by:
-
Arnd Bergmann authored
A recent cleanup moved MAX_IPTUN_ENCAP_OPS along with some other definitions, but it is now invisible when CONFIG_INET is not defined, but still referenced from ip6_tunnel.h: In file included from net/xfrm/xfrm_input.c:17:0: include/net/ip6_tunnel.h:67:17: error: 'MAX_IPTUN_ENCAP_OPS' undeclared here (not in a function) ip6tun_encaps[MAX_IPTUN_ENCAP_OPS]; ^~~~~~~~~~~~~~~~~~~ This hides the ip6_encap_hlen and ip6_tnl_encap functions inside of CONFIG_INET so we don't run into the the problem. Alternatively we could move the macro out of the #ifdef again to restore the previous behavior Signed-off-by:
-
- 26 May, 2016 17 commits
-
-
David S. Miller authored
Yuval Mintz says: ==================== qed*: Bug fixes This series contain several small fixes, most of which deal with either 100g support, sriov or bandwidth configurations. ==================== Signed-off-by: -
Yuval Mintz authored
Currently 100g devices don't support minimum/maximum BW configurations, yet link flaps might cause the driver to attempt to do such a configuration. Prevent this just as we do for the maximum BW. Signed-off-by:
Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by:
-
Sudarsana Reddy Kalluru authored
Adapter can support 100g in both MSIx and INTa, but not in MSI. Signed-off-by:
Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by:
-
Yuval Mintz authored
Some of the HW configurations are currently missing for 100g devices. This can cause various classification issues, as well as prevent device from fully reaching line-rate. Signed-off-by:
-
Yuval Mintz authored
When DCBx re-negotiation is occurring, the PF's configurations for maximum and minimum bandwidth guarantees are currently lost. Signed-off-by:
-
Sudarsana Reddy Kalluru authored
Commit 39651abd ("qed: add support for dcbx") is re-configuring the QM hw-block as part of its sequence. This is done in attention handling context which is non-sleepable, yet memory is allocated in this flow using GFP_KERNEL. Signed-off-by:
-
Yuval Mintz authored
PFs and VFs differ in their registered ethtool operations, but they're using a common function for get_sset_count(). As a result, `ethtool -i' for a VF would indicate it supports selftest, although that's not the case. Signed-off-by:
-
Yuval Mintz authored
Since driver is using a FW-based GRO implementation, this has some effects on its ability to cope with GRO enablement/disablement. As a result, driver must perform an inner-reload as a result of a state change in the offload configuration of said feature. [Failure to do so means network stack would continue to receive aggregated packets even though user requested the feature to be disabled]. Signed-off-by:
-
Yuval Mintz authored
VF is currently ignoring the minimum provided by the API, mistakenly using the maximum for minimum as well. Signed-off-by:
-
David S. Miller authored
Eric Dumazet says: ==================== net/mlx4_en: fix stats mlx4 has various bugs in its ndo_get_stats() and related functions. This patch series address the obvious issues. Remaining ones will be discussed later. ==================== Signed-off-by: -
Eric Dumazet authored
We simply can use the standard net_device stats. We do not need to clear fields that are already 0. Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by:
-
Eric Dumazet authored
mlx4 uses a private struct net_device_stats in a vain attempt to avoid races. This is buggy because multiple cpus could call mlx4_en_get_stats() at the same time, so ret_stats can not guarantee stable results. To fix this, we need to switch to ndo_get_stats64() as this method provides per-thread storage. This allows to reduce mlx4_en_priv bloat. Signed-off-by:
-
Eric Dumazet authored
mlx4_en_clear_stats() clears about everything but few TX ring fields are missing : - queue_stopped, wake_queue, tso_packets, xmit_more Signed-off-by:
-
Eric Dumazet authored
1) mlx4_en_xmit() can increment priv->stats.tx_dropped, but this variable is overwritten in mlx4_en_DUMP_ETH_STATS(). 2) This increment was not SMP safe, as a port might have many TX queues. Add a per TX ring tx_dropped to fix these issues. This is u32 as mlx4_en_DUMP_ETH_STATS() will add a 32bit field. So lets avoid bugs with SNMP agents having to cope with partial overwraps. (One of these agents being bond_fold_stats()) Signed-off-by:
Willem de Bruijn <willemb@google.com> Cc: Eugenia Emantayev <eugenia@mellanox.com> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Xin Long authored
We have this situation: that EP hash table, contains only the EPs that are listening, while the transports one, has the opposite. We have to traverse both to dump all. But when we traverse the transports one we will also get EPs that are in the EP hash if they are listening. In this case, the EP is dumped twice. We will fix it by checking if the endpoint that is in the endpoint hash table contains any ep->asoc in there, as it means we will also find it via transport hash, and thus we can/should skip it, depending on the filters used, like 'ss -l'. Still, we should NOT skip it if the user is listing only listening endpoints, because then we are not traversing the transport hash. so we have to check idiag_states there also. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Marek Vasut authored
Fix a typo in the driver, replace comma with a semicolon at the end of statement. While using comma is a legal C here and probably does not even generate compiler warning, it was unlikely the intention. Signed-off-by:
Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Caesar Wang <wxt@rock-chips.com> Cc: Heiko Stuebner <heiko@sntech.de> Signed-off-by:
-
Marek Vasut authored
The memcpy() currently copies mdio_bus_data into new_bus->irq, which makes no sense, since the mdio_bus_data structure contains more than just irqs. The code was likely supposed to copy mdio_bus_data->irqs into the new_bus->irq instead, so fix this. Fixes: e7f4dc35 ("mdio: Move allocation of interrupts into core") Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
- 25 May, 2016 6 commits
-
-
Feng Tang authored
This patch follows Eric Dumazet's commit 7b701764 for Atheros atl1c driver to fix one exactly same bug in alx driver, that the network link will be lost in 1-5 minutes after the device is up. My laptop Lenovo Y580 with Atheros AR8161 ethernet device hit the same problem with kernel 4.4, and it will be cured by Jarod Wilson's commit c406700c for alx driver which get merged in 4.5. But there are still some alx devices can't function well even with Jarod's patch, while this patch could make them work fine. More details on https://bugzilla.kernel.org/show_bug.cgi?id=70761 The debug shows the issue is very likely to be related with the RX DMA address, specifically 0x...f80, if RX buffer get 0x...f80 several times, their will be RX overflow error and device will stop working. For kernel 4.5.0 with Jarod's patch which works fine with my AR8161/Lennov Y580, if I made some change to the __netdev_alloc_skb --> __alloc_page_frag() to make the allocated buffer can get an address with 0x...f80, then the same error happens. If I make it to 0x...f40 or 0x....fc0, everything will be still fine. So I tend to believe that the 0x..f80 address cause the silicon to behave abnormally. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=70761 Cc: Eric Dumazet <edumazet@google.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Jarod Wilson <jarod@redhat.com> Signed-off-by:
Feng Tang <feng.tang@intel.com> Tested-by:
Ole Lukoie <olelukoie@mail.ru> Signed-off-by:
-
Ivan Vecera authored
The team_device_event() notifier calls team_compute_features() to fix vlan_features under team->lock to protect team->port_list. The problem is that subsequent __team_compute_features() calls netdev_change_features() to propagate vlan_features to upper vlan devices while team->lock is still taken. This can lead to deadlock when NETIF_F_LRO is modified on lower devices or team device itself. Example: The team0 as active backup with eth0 and eth1 NICs. Both eth0 & eth1 are LRO capable and LRO is enabled. Thus LRO is also enabled on team0. The command 'ethtool -K team0 lro off' now hangs due to this deadlock: dev_ethtool() -> ethtool_set_features() -> __netdev_update_features(team) -> netdev_sync_lower_features() -> netdev_update_features(lower_1) -> __netdev_update_features(lower_1) -> netdev_features_change(lower_1) -> call_netdevice_notifiers(...) -> team_device_event(lower_1) -> team_compute_features(team) [TAKES team->lock] -> netdev_change_features(team) -> __netdev_update_features(team) -> netdev_sync_lower_features() -> netdev_update_features(lower_2) -> __netdev_update_features(lower_2) -> netdev_features_change(lower_2) -> call_netdevice_notifiers(...) -> team_device_event(lower_2) -> team_compute_features(team) [DEADLOCK] The bug is present in team from the beginning but it appeared after the commit fd867d51 (net/core: generic support for disabling netdev features down stack) that adds synchronization of features with lower devices. Fixes: fd867d51 (net/core: generic support for disabling netdev features down stack) Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by:Ivan Vecera <ivecera@redhat.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
David S. Miller authored
Florian Fainelli says: ==================== Documentation: dsa: misc fixes Here are some miscelaneous documentation fixes for DSA, I targeted "net" because these are not functional code changes, but still documentation fixes per-se. Changes in v2: - reword what the port_vlan_filtering is about based on feedback from Vivien and Ido ==================== Signed-off-by: -
Florian Fainelli authored
Described what the port_vlan_filtering function is supposed to accomplish. Fixes: fb2dabad ("net: dsa: support VLAN filtering switchdev attr") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
-
Florian Fainelli authored
We no longer have a priv_size structure member since 5feebd0a ("net: dsa: Remove allocation of driver private memory") Reviewed-by:
-
Florian Fainelli authored
This function has been removed in 4baee937 ("net: dsa: remove DSA link polling") in favor of using the PHYLIB polling mechanism. Reviewed-by:
-
