- 20 Feb, 2018 3 commits
-
-
Markus Elfring authored
Omit an extra message for a memory allocation failure in these functions. This issue was detected by using the Coccinelle software. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
Inki Dae <inki.dae@samsung.com>
-
Wolfram Sang authored
Due to a typo, the mask was destroyed by a comparison instead of a bit shift. Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by:
-
Arnd Bergmann authored
The exynos DRM driver uses real-time 'struct timeval' values for exporting its timestamps to user space. This has multiple problems: 1. signed seconds overflow in y2038 2. the 'struct timeval' definition is deprecated in the kernel 3. time may jump or go backwards after a 'settimeofday()' syscall 4. other DRM timestamps are in CLOCK_MONOTONIC domain, so they can't be compared 5. exporting microseconds requires a division by 1000, which may be slow on some architectures. The code existed in two places before, but the IPP portion was removed in 8ded5941 ("drm/exynos: ipp: Remove Exynos DRM IPP subsystem"), so we no longer need to worry about it. Ideally timestamps should just use 64-bit nanoseconds instead, but of course we can't change that now. Instead, this tries to address the first four points above by using monotonic 'timespec' values. According to Tobias Jakobi, user space doesn't care about the timestamp at the moment, so we can change the format. Even if there is something looking at them, it will work just fine with monotonic times as long as the application only looks at the relative values between two events. Link: https://patchwork.kernel.org/patch/10038593/ Cc: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by:
-
- 16 Feb, 2018 4 commits
-
-
git://github.com/skeggsb/linuxDave Airlie authored
single fix for older gpus. * 'linux-4.16' of git://github.com/skeggsb/linux: drm/nouveau: Make clock gate support conditional
-
Thierry Reding authored
The recently introduced clock gate support breaks on Tegra chips because no thermal support is enabled for those devices. Conditionalize the code on the existence of thermal support to fix this. Fixes: b138eca6 ("drm/nouveau: Add support for basic clockgating on Kepler1") Cc: Martin Peres <martin.peres@free.fr> Cc: Lyude Paul <lyude@redhat.com> Signed-off-by:
Thierry Reding <treding@nvidia.com> Reviewed-by:
Lyude Paul <lyude@redhat.com> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com>
-
Dave Airlie authored
Merge tag 'drm-intel-fixes-2018-02-14-1' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes There are important fixes for VLV with MIPI/DSI panels, 2 clean-up patches needed for this MIPI/DSI fix, and many fixes for GEM including fixes for Perf OA and PMU, and fixes on scheduler and preemption. This also includes GVT fixes: "This has one to fix GTT mmio 8b access from guest and two simple ones for mmio switch and typo fix" * tag 'drm-intel-fixes-2018-02-14-1' of git://anongit.freedesktop.org/drm/drm-intel: drm/i915: Fix DSI panels with v1 MIPI sequences without a DEASSERT sequence v3 drm/i915: Free memdup-ed DSI VBT data structures on driver_unload drm/i915: Add intel_bios_cleanup() function drm/i915/vlv: Add cdclk workaround for DSI drm/i915/gvt: fix one typo of render_mmio trace drm/i915/gvt: Support BAR0 8-byte reads/writes drm/i915/gvt: add 0xe4f0 into gen9 render list drm/i915/pmu: Fix building without CONFIG_PM drm/i915/pmu: Fix sleep under atomic in RC6 readout drm/i915/pmu: Fix PMU enable vs execlists tasklet race drm/i915: Lock out execlist tasklet while peeking inside for busy-stats drm/i915/breadcrumbs: Ignore unsubmitted signalers drm/i915: Don't wake the device up to check if the engine is asleep drm/i915: Avoid truncation before clamping userspace's priority value drm/i915/perf: Fix compiler warning for string truncation drm/i915/perf: Fix compiler warning for string truncation
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
single atpx fix * 'drm-next-4.16' of git://people.freedesktop.org/~agd5f/linux: drm/amdgpu: add new device to use atpx quirk
-
- 14 Feb, 2018 13 commits
-
-
Hans de Goede authored
So far models of the Dell Venue 8 Pro, with a panel with MIPI panel index = 3, one of which has been kindly provided to me by Jan Brummer, where not working with the i915 driver, giving a black screen on the first modeset. The problem with at least these Dells is that their VBT defines a MIPI ASSERT sequence, but not a DEASSERT sequence. Instead they DEASSERT the reset in their INIT_OTP sequence, but the deassert must be done before calling intel_dsi_device_ready(), so that is too late. Simply doing the INIT_OTP sequence earlier is not enough to fix this, because the INIT_OTP sequence also sends various MIPI packets to the panel, which can only happen after calling intel_dsi_device_ready(). This commit fixes this by splitting the INIT_OTP sequence into everything before the first DSI packet and everything else, including the first DSI packet. The first part (everything before the first DSI packet) is then used as deassert sequence. Changed in v2: -Split the init OTP sequence into a deassert reset and the actual init OTP sequence, instead of calling it earlier and then having the first mipi_exec_send_packet() call call intel_dsi_device_ready(). Changes in v3: -Move the whole shebang to intel_bios.c Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82880 References: https://bugs.freedesktop.org/show_bug.cgi?id=101205 Cc: Jan-Michael Brummer <jan.brummer@tabos.org> Reported-by:
Jan-Michael Brummer <jan.brummer@tabos.org> Tested-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com>
-
Hans de Goede authored
Make intel_bios_cleanup function free the DSI VBT data structures which are memdup-ed by parse_mipi_config() and parse_mipi_sequence(). Reviewed-by:
-
Hans de Goede authored
Add an intel_bios_cleanup() function to act as counterpart of intel_bios_init() and move the cleanup of vbt related resources there, putting it in the same file as the allocation. Changed in v2: -While touching the code anyways, remove the unnecessary: if (dev_priv->vbt.child_dev) done before kfree(dev_priv->vbt.child_dev) Reviewed-by:
-
Hans de Goede authored
At least on the Chuwi Vi8 (non pro/plus) the LCD panel will show an image shifted aprox. 20% to the left (with wraparound) and sometimes also wrong colors, showing that the panel controller is starting with sampling the datastream somewhere mid-line. This happens after the first blanking and re-init of the panel. After looking at drm.debug output I noticed that initially we inherit the cdclk of 333333 KHz set by the GOP, but after the re-init we picked 266667 KHz, which turns out to be the cause of this problem, a quick hack to hard code the cdclk to 333333 KHz makes the problem go away. I've tested this on various Bay Trail devices, to make sure this not does cause regressions on other devices and the higher cdclk does not cause any problems on the following devices: -GP-electronic T701 1024x600 333333 KHz cdclk after this patch -PEAQ C1010 1920x1200 333333 KHz cdclk after this patch -PoV mobii-wintab-800w 800x1280 333333 KHz cdclk after this patch -Asus Transformer-T100TA 1368x768 320000 KHz cdclk after this patch Also interesting wrt this is the comment in vlv_calc_cdclk about the existing workaround to avoid 200 Mhz as clock because that causes issues in some cases. This commit extends the "do not use 200 Mhz" workaround with an extra check to require atleast 320000 KHz (avoiding 266667 KHz) when a DSI panel is active. Changes in v2: -Change the commit message and the code comment to not treat the GOP as a reference, the GOP should not be treated as a reference Acked-by:
-
https://github.com/intel/gvt-linuxRodrigo Vivi authored
gvt-fixes-2018-02-14 - gtt mmio 8b access fix (Tina) - one KBL required mmio reg for switch (Weinan) - one trace log typo fix (Weinan) Signed-off-by:
-
Weinan Li authored
Fix one typo of render_mmio trace, exchange the mmio value of old and new. Signed-off-by:
Weinan Li <weinan.z.li@intel.com> Signed-off-by:
Zhenyu Wang <zhenyuw@linux.intel.com>
-
Tina Zhang authored
GGTT is in BAR0 with 8 bytes aligned. With a qemu patch (commit: 38d49e8c1523d97d2191190d3f7b4ce7a0ab5aa3), VFIO can use 8-byte reads/ writes to access it. This patch is to support the 8-byte GGTT reads/writes. Ideally, we would like to support 8-byte reads/writes for the total BAR0. But it needs more work for handling 8-byte MMIO reads/writes. This patch can fix the issue caused by partial updating GGTT entry, during guest booting up. v3: - Use intel_vgpu_get_bar_gpa() stead. (Zhenyu) - Include all the GGTT checking logic in gtt_entry(). (Zhenyu) v2: - Limit to GGTT entry. (Zhenyu) Signed-off-by:
Tina Zhang <tina.zhang@intel.com> Signed-off-by:
-
Weinan Li authored
Guest may set this register on KBL platform, it can impact hardware behavior, so add it into the gen9 render list. Otherwise gpu hang issue may happen during different vgpu switch. v2: separate it from patch set. Cc: Zhi Wang <zhi.a.wang@intel.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by:
-
Chris Wilson authored
As we peek inside struct device to query members guarded by CONFIG_PM, so must be the code. Reported-by:
kbuild test robot <fengguang.wu@intel.com> Fixes: 1fe699e3 ("drm/i915/pmu: Fix sleep under atomic in RC6 readout") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180207160428.17015-1-chris@chris-wilson.co.uk (cherry picked from commit 05273c95) Signed-off-by:
-
Tvrtko Ursulin authored
We are not allowed to call intel_runtime_pm_get from the PMU counter read callback since the former can sleep, and the latter is running under IRQ context. To workaround this, we record the last known RC6 and while runtime suspended estimate its increase by querying the runtime PM core timestamps. Downside of this approach is that we can temporarily lose a chunk of RC6 time, from the last PMU read-out to runtime suspend entry, but that will eventually catch up, once device comes back online and in the presence of PMU queries. Also, we have to be careful not to overshoot the RC6 estimate, so once resumed after a period of approximation, we only update the counter once it catches up. With the observation that RC6 is increasing while the device is suspended, this should not pose a problem and can only cause slight inaccuracies due clock base differences. v2: Simplify by estimating on top of PM core counters. (Imre) Signed-off-by:
-
Tvrtko Ursulin authored
Commit 99e48bf9 ("drm/i915: Lock out execlist tasklet while peeking inside for busy-stats") added a tasklet_disable call in busy stats enabling, but we failed to understand that the PMU enable callback runs as an hard IRQ (IPI). Consequence of this is that the PMU enable callback can interrupt the execlists tasklet, and will then deadlock when it calls intel_engine_stats_enable->tasklet_disable. To fix this, I realized it is possible to move the engine stats enablement and disablement to PMU event init and destroy hooks. This allows for much simpler implementation since those hooks run in normal context (can sleep). v2: Extract engine_event_destroy. (Chris Wilson) Signed-off-by:
-
Chris Wilson authored
In order to prevent a race condition where we may end up overaccounting the active state and leaving the busy-stats believing the GPU is 100% busy, lock out the tasklet while we reconstruct the busy state. There is no direct spinlock guard for the execlists->port[], so we need to utilise tasklet_disable() as a synchronous barrier to prevent it, the only writer to execlists->port[], from running at the same time as the enable. Fixes: 4900727d ("drm/i915/pmu: Reconstruct active state on starting busy-stats") Signed-off-by:
-
Chris Wilson authored
When a request is preempted, it is unsubmitted from the HW queue and removed from the active list of breadcrumbs. In the process, this however triggers the signaler and it may see the clear rbtree with the old, and still valid, seqno, or it may match the cleared seqno with the now zero rq->global_seqno. This confuses the signaler into action and signaling the fence. Fixes: d6a2289d ("drm/i915: Remove the preempted request from the execution queue") Signed-off-by:
-
- 13 Feb, 2018 4 commits
-
-
Chris Wilson authored
If the entire device is powered off, we can safely assume that the engine is also asleep (and idle). Reported-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180212093928.6005-1-chris@chris-wilson.co.uk (cherry picked from commit 74d00d28) Signed-off-by:
-
Chris Wilson authored
Userspace provides a 64b value for the priority, we need to be careful to preserve the full range before validation to prevent truncation (and letting an illegal value pass). Reported-by:
Antonio Argenziano <antonio.argenziano@intel.com> Fixes: ac14fbd4 ("drm/i915/scheduler: Support user-defined priorities") Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (cherry picked from commit 11a18f63) Signed-off-by:
-
Chris Wilson authored
drivers/gpu/drm/i915/i915_oa_cnl.c: In function ‘i915_perf_load_test_config_cnl’: drivers/gpu/drm/i915/i915_oa_cnl.c:99:2: error: ‘strncpy’ output truncated before terminating nul copying 36 bytes from a string of the same length [-Werror=stringop-truncation] v2: strlcpy Fixes: 95690a02 ("drm/i915/perf: enable perf support on CNL") Signed-off-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180208102403.5587-2-chris@chris-wilson.co.uk (cherry picked from commit 020580ff) Signed-off-by:
-
Chris Wilson authored
drivers/gpu/drm/i915/i915_oa_cflgt3.c: In function ‘i915_perf_load_test_config_cflgt3’: drivers/gpu/drm/i915/i915_oa_cflgt3.c:87:2: error: ‘strncpy’ output truncated before terminating nul copying 36 bytes from a string of the same length [-Werror=stringop-truncation] v2: strlcpy Fixes: 4407eaa9 ("drm/i915/perf: add support for Coffeelake GT3") Signed-off-by:
-
- 11 Feb, 2018 9 commits
-
-
Linus Torvalds authored
-
Al Viro authored
except, again, POLLFREE and POLL_BUSY_LOOP. With this, we finally get to the promised end result: - POLL{IN,OUT,...} are plain integers and *not* in __poll_t, so any stray instances of ->poll() still using those will be caught by sparse. - eventpoll.c and select.c warning-free wrt __poll_t - no more kernel-side definitions of POLL... - userland ones are visible through the entire kernel (and used pretty much only for mangle/demangle) - same behavior as after the first series (i.e. sparc et.al. epoll(2) working correctly). Signed-off-by:Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull more poll annotation updates from Al Viro: "This is preparation to solving the problems you've mentioned in the original poll series. After this series, the kernel is ready for running for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done as a for bulk search-and-replace. After that, the kernel is ready to apply the patch to unify {de,}mangle_poll(), and then get rid of kernel-side POLL... uses entirely, and we should be all done with that stuff. Basically, that's what you suggested wrt KPOLL..., except that we can use EPOLL... instead - they already are arch-independent (and equal to what is currently kernel-side POLL...). After the preparations (in this series) switch to returning EPOLL... from ->poll() instances is completely mechanical and kernel-side POLL... can go away. The last step (killing kernel-side POLL... and unifying {de,}mangle_poll() has to be done after the search-and-replace job, since we need userland-side POLL... for unified {de,}mangle_poll(), thus the cherry-pick at the last step. After that we will have: - POLL{IN,OUT,...} *not* in __poll_t, so any stray instances of ->poll() still using those will be caught by sparse. - eventpoll.c and select.c warning-free wrt __poll_t - no more kernel-side definitions of POLL... - userland ones are visible through the entire kernel (and used pretty much only for mangle/demangle) - same behavior as after the first series (i.e. sparc et.al. epoll(2) working correctly)" * 'work.poll2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: annotate ep_scan_ready_list() ep_send_events_proc(): return result via esed->res preparation to switching ->poll() to returning EPOLL... add EPOLLNVAL, annotate EPOLL... and event_poll->event use linux/poll.h instead of asm/poll.h xen: fix poll misannotation smc: missing poll annotations -
git://github.com/jcmvbkbc/linux-xtensaLinus Torvalds authored
Pull xtense fix from Max Filippov: "Build fix for xtensa architecture with KASAN enabled" * tag 'xtensa-20180211' of git://github.com/jcmvbkbc/linux-xtensa: xtensa: fix build with KASAN
-
git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2Linus Torvalds authored
Pull nios2 update from Ley Foon Tan: - clean up old Kconfig options from defconfig - remove leading 0x and 0s from bindings notation in dts files * tag 'nios2-v4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2: nios2: defconfig: Cleanup from old Kconfig options nios2: dts: Remove leading 0x and 0s from bindings notation
-
Max Filippov authored
The commit 917538e2 ("kasan: clean up KASAN_SHADOW_SCALE_SHIFT usage") removed KASAN_SHADOW_SCALE_SHIFT definition from include/linux/kasan.h and added it to architecture-specific headers, except for xtensa. This broke the xtensa build with KASAN enabled. Define KASAN_SHADOW_SCALE_SHIFT in arch/xtensa/include/asm/kasan.h Reported by: kbuild test robot <fengguang.wu@intel.com> Fixes: 917538e2 ("kasan: clean up KASAN_SHADOW_SCALE_SHIFT usage") Acked-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com>
-
Krzysztof Kozlowski authored
Remove old, dead Kconfig option INET_LRO. It is gone since commit 7bbf3cae ("ipv4: Remove inet_lro library"). Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Acked-by:
Ley Foon Tan <ley.foon.tan@intel.com>
-
Mathieu Malaterre authored
Improve the DTS files by removing all the leading "0x" and zeros to fix the following dtc warnings: Warning (unit_address_format): Node /XXX unit name should not have leading "0x" and Warning (unit_address_format): Node /XXX unit name should not have leading 0s Converted using the following command: find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -E -i -e "s/@0x([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" -e "s/@0+([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" {} + For simplicity, two sed expressions were used to solve each warnings separately. To make the regex expression more robust a few other issues were resolved, namely setting unit-address to lower case, and adding a whitespace before the the opening curly brace: https://elinux.org/Device_Tree_Linux#Linux_conventions This is a follow up to commit 4c9847b7 ("dt-bindings: Remove leading 0x from bindings notation") Reported-by:David Daney <ddaney@caviumnetworks.com> Suggested-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Mathieu Malaterre <malat@debian.org> Acked-by:
-
- 10 Feb, 2018 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI fix from Bjorn Helgaas: "Fix a POWER9/powernv INTx regression from the merge window (Alexey Kardashevskiy)" * tag 'pci-v4.16-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: powerpc/pci: Fix broken INTx configuration via OF
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "A few fixes to round off the merge window on the block side: - a set of bcache fixes by way of Michael Lyle, from the usual bcache suspects. - add a simple-to-hook-into function for bpf EIO error injection. - fix blk-wbt that mischarectized flushes as reads. Improve the logic so that flushes and writes are accounted as writes, and only reads as reads. From me. - fix requeue crash in BFQ, from Paolo" * tag 'for-linus-20180210' of git://git.kernel.dk/linux-block: block, bfq: add requeue-request hook bcache: fix for data collapse after re-attaching an attached device bcache: return attach error when no cache set exist bcache: set writeback_rate_update_seconds in range [1, 60] seconds bcache: fix for allocator and register thread race bcache: set error_limit correctly bcache: properly set task state in bch_writeback_thread() bcache: fix high CPU occupancy during journal bcache: add journal statistic block: Add should_fail_bio() for bpf error injection blk-wbt: account flush requests correctly -
git://github.com/dvhart/linux-pdx86Linus Torvalds authored
Pull x86 platform driver updates from Darren Hart: "Mellanox fixes and new system type support. Mostly data for new system types with a correction and an uninitialized variable fix" [ Pulling from github because git.infradead.org currently seems to be down for some reason, but Darren had a backup location - Linus ] * tag 'platform-drivers-x86-v4.16-3' of git://github.com/dvhart/linux-pdx86: platform/x86: mlx-platform: Add support for new 200G IB and Ethernet systems platform/x86: mlx-platform: Add support for new msn201x system type platform/x86: mlx-platform: Add support for new msn274x system type platform/x86: mlx-platform: Fix power cable setting for msn21xx family platform/x86: mlx-platform: Add define for the negative bus platform/x86: mlx-platform: Use defines for bus assignment platform/mellanox: mlxreg-hotplug: Fix uninitialized variable
-
Linus Torvalds authored
Merge tag 'chrome-platform-for-linus-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform Pull chrome platform updates from Benson Leung: - move cros_ec_dev to drivers/mfd - other small maintenance fixes [ The cros_ec_dev movement came in earlier through the MFD tree - Linus ] * tag 'chrome-platform-for-linus-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform: platform/chrome: Use proper protocol transfer function platform/chrome: cros_ec_lpc: Add support for Google Glimmer platform/chrome: cros_ec_lpc: Register the driver if ACPI entry is missing. platform/chrome: cros_ec_lpc: remove redundant pointer request cros_ec: fix nul-termination for firmware build info platform/chrome: chromeos_laptop: make chromeos_laptop const
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM updates from Radim Krčmář: "ARM: - icache invalidation optimizations, improving VM startup time - support for forwarded level-triggered interrupts, improving performance for timers and passthrough platform devices - a small fix for power-management notifiers, and some cosmetic changes PPC: - add MMIO emulation for vector loads and stores - allow HPT guests to run on a radix host on POWER9 v2.2 CPUs without requiring the complex thread synchronization of older CPU versions - improve the handling of escalation interrupts with the XIVE interrupt controller - support decrement register migration - various cleanups and bugfixes. s390: - Cornelia Huck passed maintainership to Janosch Frank - exitless interrupts for emulated devices - cleanup of cpuflag handling - kvm_stat counter improvements - VSIE improvements - mm cleanup x86: - hypervisor part of SEV - UMIP, RDPID, and MSR_SMI_COUNT emulation - paravirtualized TLB shootdown using the new KVM_VCPU_PREEMPTED bit - allow guests to see TOPOEXT, GFNI, VAES, VPCLMULQDQ, and more AVX512 features - show vcpu id in its anonymous inode name - many fixes and cleanups - per-VCPU MSR bitmaps (already merged through x86/pti branch) - stable KVM clock when nesting on Hyper-V (merged through x86/hyperv)" * tag 'kvm-4.16-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (197 commits) KVM: PPC: Book3S: Add MMIO emulation for VMX instructions KVM: PPC: Book3S HV: Branch inside feature section KVM: PPC: Book3S HV: Make HPT resizing work on POWER9 KVM: PPC: Book3S HV: Fix handling of secondary HPTEG in HPT resizing code KVM: PPC: Book3S PR: Fix broken select due to misspelling KVM: x86: don't forget vcpu_put() in kvm_arch_vcpu_ioctl_set_sregs() KVM: PPC: Book3S PR: Fix svcpu copying with preemption enabled KVM: PPC: Book3S HV: Drop locks before reading guest memory kvm: x86: remove efer_reload entry in kvm_vcpu_stat KVM: x86: AMD Processor Topology Information x86/kvm/vmx: do not use vm-exit instruction length for fast MMIO when running nested kvm: embed vcpu id to dentry of vcpu anon inode kvm: Map PFN-type memory regions as writable (if possible) x86/kvm: Make it compile on 32bit and with HYPYERVISOR_GUEST=n KVM: arm/arm64: Fixup userspace irqchip static key optimization KVM: arm/arm64: Fix userspace_irqchip_in_use counting KVM: arm/arm64: Fix incorrect timer_is_pending logic MAINTAINERS: update KVM/s390 maintainers MAINTAINERS: add Halil as additional vfio-ccw maintainer MAINTAINERS: add David as a reviewer for KVM/s390 ... -
Alexey Kardashevskiy authored
59f47eff ("powerpc/pci: Use of_irq_parse_and_map_pci() helper") replaced of_irq_parse_pci() + irq_create_of_mapping() with of_irq_parse_and_map_pci(), but neglected to capture the virq returned by irq_create_of_mapping(), so virq remained zero, which caused INTx configuration to fail. Save the virq value returned by of_irq_parse_and_map_pci() and correct the virq declaration to match the of_irq_parse_and_map_pci() signature. Fixes: 59f47eff "powerpc/pci: Use of_irq_parse_and_map_pci() helper" Signed-off-by:
Alexey Kardashevskiy <aik@ozlabs.ru> [bhelgaas: changelog] Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuildLinus Torvalds authored
Pull more Kbuild updates from Masahiro Yamada: "Makefile changes: - enable unused-variable warning that was wrongly disabled for clang Kconfig changes: - warn about blank 'help' and fix existing instances - fix 'choice' behavior to not write out invisible symbols - fix misc weirdness Coccinell changes: - fix false positive of free after managed memory alloc detection - improve performance of NULL dereference detection" * tag 'kbuild-v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (21 commits) kconfig: remove const qualifier from sym_expand_string_value() kconfig: add xrealloc() helper kconfig: send error messages to stderr kconfig: echo stdin to stdout if either is redirected kconfig: remove check_stdin() kconfig: remove 'config*' pattern from .gitignnore kconfig: show '?' prompt even if no help text is available kconfig: do not write choice values when their dependency becomes n coccinelle: deref_null: avoid useless computation coccinelle: devm_free: reduce false positives kbuild: clang: disable unused variable warnings only when constant kconfig: Warn if help text is blank nios2: kconfig: Remove blank help text arm: vt8500: kconfig: Remove blank help text MIPS: kconfig: Remove blank help text MIPS: BCM63XX: kconfig: Remove blank help text lib/Kconfig.debug: Remove blank help text Staging: rtl8192e: kconfig: Remove blank help text Staging: rtl8192u: kconfig: Remove blank help text mmc: kconfig: Remove blank help text ...
-
