- 16 Mar, 2017 40 commits
-
-
Johan Hovold authored
commit 4f9785cc upstream. In case a device is left in "boot-mode" we must not register any port devices in order to avoid a NULL-pointer dereference on open due to missing endpoints. This could be used by a malicious device to trigger an OOPS: Unable to handle kernel NULL pointer dereference at virtual address 00000030 ... [<bf0caa84>] (edge_open [io_ti]) from [<bf0b0118>] (serial_port_activate+0x68/0x98 [usbserial]) [<bf0b0118>] (serial_port_activate [usbserial]) from [<c0470ca4>] (tty_port_open+0x9c/0xe8) [<c0470ca4>] (tty_port_open) from [<bf0b0da0>] (serial_open+0x48/0x6c [usbserial]) [<bf0b0da0>] (serial_open [usbserial]) from [<c0469178>] (tty_open+0xcc/0x5cc) Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Johan Hovold <johan@kernel.org> [bwh: Backported to 3.16: - No heartbeat_work to initialise earlier - Adjust context] Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Johan Hovold authored
commit a323fefc upstream. Fix NULL-pointer dereference when clearing halt at open should a malicious device lack the expected endpoints when in download mode. Unable to handle kernel NULL pointer dereference at virtual address 00000030 ... [<bf011ed8>] (edge_open [io_ti]) from [<bf000118>] (serial_port_activate+0x68/0x98 [usbserial]) [<bf000118>] (serial_port_activate [usbserial]) from [<c0470ca4>] (tty_port_open+0x9c/0xe8) [<c0470ca4>] (tty_port_open) from [<bf000da0>] (serial_open+0x48/0x6c [usbserial]) [<bf000da0>] (serial_open [usbserial]) from [<c0469178>] (tty_open+0xcc/0x5cc) Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Johan Hovold authored
commit 0dd40842 upstream. Fix NULL-pointer dereference when initialising URBs at open should a non-EPIC device lack a bulk-in or interrupt-in endpoint. Unable to handle kernel NULL pointer dereference at virtual address 00000028 ... PC is at edge_open+0x24c/0x3e8 [io_edgeport] Note that the EPIC-device probe path has the required sanity checks so this makes those checks partially redundant. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Johan Hovold authored
commit c4ac4496 upstream. Make sure to free the URB transfer buffer in case submission fails (e.g. due to a disconnect). Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Johan Hovold authored
commit 3dca0111 upstream. Fix NULL-pointer dereference when clearing halt at open should the device lack a bulk-out endpoint. Unable to handle kernel NULL pointer dereference at virtual address 00000030 ... PC is at cyberjack_open+0x40/0x9c [cyberjack] Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Wan Ahmad Zainie authored
commit 6c97cfc1 upstream. Intel Apollo Lake also requires XHCI_PME_STUCK_QUIRK. Adding its PCI ID to quirk. Signed-off-by:
Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Lu Baolu authored
commit 4dea7077 upstream. In command timer function, xhci_handle_command_timeout(), xhci->lock is unlocked before call into xhci_abort_cmd_ring(). This might cause race between the timer function and the event handler. The xhci_abort_cmd_ring() function sets the CMD_RING_ABORT bit in the command register and polling it until the setting takes effect. A stop command ring event might be handled between writing the abort bit and polling for it. The event handler will restart the command ring, which causes the failure of polling, and we ever believed that we failed to stop it. As a bonus, this also fixes some issues of calling functions without locking in xhci_handle_command_timeout(). Signed-off-by:
Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by:
-
Mathias Nyman authored
commit a5a1b951 upstream. If we get a command completion event at the same time as the command timeout work starts on another cpu we might end up aborting the wrong command. If the command completion takes the xhci lock before the timeout work, it will handle the command, pick the next command, mark it as current_cmd, and re-queue the timeout work. When the timeout work finally gets the lock It will start aborting the wrong command. This case can be resolved by checking if the timeout work is pending inside the timeout function itself. A new timeout work can only be pending if the command completed and a new command was queued. If there are no more commands pending then command completion will set the current_cmd to NULL, which is already handled in the timeout work. Reported-by:
Baolin Wang <baolin.wang@linaro.org> Signed-off-by:
-
Baolin Wang authored
commit 2a7cfdf3 upstream. When current command was supposed to be aborted, host will free the command in handle_cmd_completion() function. But it might be still referenced by xhci->current_cmd, which need to set NULL. Signed-off-by:
-
Lu Baolu authored
commit 2b985467 upstream. handle_cmd_completion() frees a command structure which might be still referenced by xhci->current_cmd. This might cause problem when xhci->current_cmd is accessed after that. A real-life case could be like this. The host takes a very long time to respond to a command, and the command timer is fired at the same time when the command completion event arrives. The command completion handler frees xhci->current_cmd before the timer function can grab xhci->lock. Afterward, timer function grabs the lock and go ahead with checking and setting members of xhci->current_cmd. Signed-off-by:
-
Mathias Nyman authored
commit ee8665e2 upstream. the tt_info provided by a HS hub might be in use to by a child device Make sure we free the devices in the correct order. This is needed in special cases such as when xhci controller is reset when resuming from hibernate, and all virt_devices are freed. Also free the virt_devices starting from max slot_id as children more commonly have higher slot_id than parent. Reported-by:
Guenter Roeck <groeck@chromium.org> Tested-by:
-
Jeff Mahoney authored
commit d0280996 upstream. In __btrfs_run_delayed_refs, when we put back a delayed ref that's too new, we have already dropped the lock on locked_ref when we set ->processing = 0. This patch keeps the lock to cover that assignment. Fixes: d7df2c79 (Btrfs: attach delayed ref updates to delayed ref heads) Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Reviewed-by:
Liu Bo <bo.li.liu@oracle.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Jeff Mahoney authored
commit aa7c8da3 upstream. In __btrfs_run_delayed_refs, the error path when run_delayed_extent_op fails sets locked_ref->processing = 0 but doesn't re-increment delayed_refs->num_heads_ready. As a result, we end up triggering the WARN_ON in btrfs_select_ref_head. Fixes: d7df2c79 (Btrfs: attach delayed ref updates to delayed ref heads) Reported-by:
Jon Nelson <jnelson-suse@jamponi.net> Signed-off-by:
-
Chanwoo Choi authored
commit 73613b16 upstream. This patch fixes the bug of devfreq_add_device(). The devfreq device must have the default governor. If find_devfreq_governor() returns error, devfreq_add_device() fail to add the devfreq instance. Fixes: 1b5c1be2 (PM / devfreq: map devfreq drivers to governor using name) Signed-off-by:
Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Axel Lin authored
commit 0f376c9c upstream. Use devfreq_list_lock around list_del() to prevent list corruption. Signed-off-by:
Axel Lin <axel.lin@ingics.com> Acked-by:
MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by:
-
Bartosz Golaszewski authored
commit ef37427a upstream. Similarly to the aemif clock - this screws up the linked list of clock children. Create a separate clock for mdio inheriting the rate from emac_clk. Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> [nsekhar@ti.com: add a comment over mdio_clk to explaing its existence + commit headline updates] Signed-off-by:
Sekhar Nori <nsekhar@ti.com> Signed-off-by:
-
Alan Stern authored
commit 1c069b05 upstream. Andrey Konovalov's fuzz testing of gadgetfs showed that we should improve the driver's checks for valid configuration descriptors passed in by the user. In particular, the driver needs to verify that the wTotalLength value in the descriptor is not too short (smaller than USB_DT_CONFIG_SIZE). And the check for whether wTotalLength is too large has to be changed, because the driver assumes there is always enough room remaining in the buffer to hold a device descriptor (at least USB_DT_DEVICE_SIZE bytes). This patch adds the additional check and fixes the existing check. It may do a little more than strictly necessary, but one extra check won't hurt. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> CC: Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> [bwh: Backported to 3.16: adjust filename] Signed-off-by:
-
Alan Stern authored
commit add333a8 upstream. Andrey Konovalov reports that fuzz testing with syzkaller causes a KASAN use-after-free bug report in gadgetfs: BUG: KASAN: use-after-free in gadgetfs_setup+0x208a/0x20e0 at addr ffff88003dfe5bf2 Read of size 2 by task syz-executor0/22994 CPU: 3 PID: 22994 Comm: syz-executor0 Not tainted 4.9.0-rc7+ #16 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 ffff88006df06a18 ffffffff81f96aba ffffffffe0528500 1ffff1000dbe0cd6 ffffed000dbe0cce ffff88006df068f0 0000000041b58ab3 ffffffff8598b4c8 ffffffff81f96828 1ffff1000dbe0ccd ffff88006df06708 ffff88006df06748 Call Trace: <IRQ> [ 201.343209] [< inline >] __dump_stack lib/dump_stack.c:15 <IRQ> [ 201.343209] [<ffffffff81f96aba>] dump_stack+0x292/0x398 lib/dump_stack.c:51 [<ffffffff817e4dec>] kasan_object_err+0x1c/0x70 mm/kasan/report.c:159 [< inline >] print_address_description mm/kasan/report.c:197 [<ffffffff817e5080>] kasan_report_error+0x1f0/0x4e0 mm/kasan/report.c:286 [< inline >] kasan_report mm/kasan/report.c:306 [<ffffffff817e562a>] __asan_report_load_n_noabort+0x3a/0x40 mm/kasan/report.c:337 [< inline >] config_buf drivers/usb/gadget/legacy/inode.c:1298 [<ffffffff8322c8fa>] gadgetfs_setup+0x208a/0x20e0 drivers/usb/gadget/legacy/inode.c:1368 [<ffffffff830fdcd0>] dummy_timer+0x11f0/0x36d0 drivers/usb/gadget/udc/dummy_hcd.c:1858 [<ffffffff814807c1>] call_timer_fn+0x241/0x800 kernel/time/timer.c:1308 [< inline >] expire_timers kernel/time/timer.c:1348 [<ffffffff81482de6>] __run_timers+0xa06/0xec0 kernel/time/timer.c:1641 [<ffffffff814832c1>] run_timer_softirq+0x21/0x80 kernel/time/timer.c:1654 [<ffffffff84f4af8b>] __do_softirq+0x2fb/0xb63 kernel/softirq.c:284 The cause of the bug is subtle. The dev_config() routine gets called twice by the fuzzer. The first time, the user data contains both a full-speed configuration descriptor and a high-speed config descriptor, causing dev->hs_config to be set. But it also contains an invalid device descriptor, so the buffer containing the descriptors is deallocated and dev_config() returns an error. The second time dev_config() is called, the user data contains only a full-speed config descriptor. But dev->hs_config still has the stale pointer remaining from the first call, causing the routine to think that there is a valid high-speed config. Later on, when the driver dereferences the stale pointer to copy that descriptor, we get a use-after-free access. The fix is simple: Clear dev->hs_config if the passed-in data does not contain a high-speed config descriptor. Signed-off-by:
Andrey Konovalov <andreyknvl@google.com> Tested-by:
-
Alan Stern authored
commit faab5098 upstream. Andrey Konovalov reports that fuzz testing with syzkaller causes a KASAN warning in gadgetfs: BUG: KASAN: slab-out-of-bounds in dev_config+0x86f/0x1190 at addr ffff88003c47e160 Write of size 65537 by task syz-executor0/6356 CPU: 3 PID: 6356 Comm: syz-executor0 Not tainted 4.9.0-rc7+ #19 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 ffff88003c107ad8 ffffffff81f96aba ffffffff3dc11ef0 1ffff10007820eee ffffed0007820ee6 ffff88003dc11f00 0000000041b58ab3 ffffffff8598b4c8 ffffffff81f96828 ffffffff813fb4a0 ffff88003b6eadc0 ffff88003c107738 Call Trace: [< inline >] __dump_stack lib/dump_stack.c:15 [<ffffffff81f96aba>] dump_stack+0x292/0x398 lib/dump_stack.c:51 [<ffffffff817e4dec>] kasan_object_err+0x1c/0x70 mm/kasan/report.c:159 [< inline >] print_address_description mm/kasan/report.c:197 [<ffffffff817e5080>] kasan_report_error+0x1f0/0x4e0 mm/kasan/report.c:286 [<ffffffff817e5705>] kasan_report+0x35/0x40 mm/kasan/report.c:306 [< inline >] check_memory_region_inline mm/kasan/kasan.c:308 [<ffffffff817e3fb9>] check_memory_region+0x139/0x190 mm/kasan/kasan.c:315 [<ffffffff817e4044>] kasan_check_write+0x14/0x20 mm/kasan/kasan.c:326 [< inline >] copy_from_user arch/x86/include/asm/uaccess.h:689 [< inline >] ep0_write drivers/usb/gadget/legacy/inode.c:1135 [<ffffffff83228caf>] dev_config+0x86f/0x1190 drivers/usb/gadget/legacy/inode.c:1759 [<ffffffff817fdd55>] __vfs_write+0x5d5/0x760 fs/read_write.c:510 [<ffffffff817ff650>] vfs_write+0x170/0x4e0 fs/read_write.c:560 [< inline >] SYSC_write fs/read_write.c:607 [<ffffffff81803a5b>] SyS_write+0xfb/0x230 fs/read_write.c:599 [<ffffffff84f47ec1>] entry_SYSCALL_64_fastpath+0x1f/0xc2 Indeed, there is a comment saying that the value of len is restricted to a 16-bit integer, but the code doesn't actually do this. This patch fixes the warning. It replaces the comment with a computation that forces the amount of data copied from the user in ep0_write() to be no larger than the wLength size for the control transfer, which is a 16-bit quantity. Signed-off-by:
-
Greg Kroah-Hartman authored
commit 0994b0a2 upstream. Andrey Konovalov reported that we were not properly checking the upper limit before of a device configuration size before calling memdup_user(), which could cause some problems. So set the upper limit to PAGE_SIZE * 4, which should be good enough for all devices. Reported-by:
-
Alan Stern authored
commit bcdbeb84 upstream. The stop_activity() routine in dummy-hcd is supposed to unlink all active requests for every endpoint, among other things. But it doesn't handle ep0. As a result, fuzz testing can generate a WARNING like the following: WARNING: CPU: 0 PID: 4410 at drivers/usb/gadget/udc/dummy_hcd.c:672 dummy_free_request+0x153/0x170 Modules linked in: CPU: 0 PID: 4410 Comm: syz-executor Not tainted 4.9.0-rc7+ #32 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 ffff88006a64ed10 ffffffff81f96b8a ffffffff41b58ab3 1ffff1000d4c9d35 ffffed000d4c9d2d ffff880065f8ac00 0000000041b58ab3 ffffffff8598b510 ffffffff81f968f8 0000000041b58ab3 ffffffff859410e0 ffffffff813f0590 Call Trace: [< inline >] __dump_stack lib/dump_stack.c:15 [<ffffffff81f96b8a>] dump_stack+0x292/0x398 lib/dump_stack.c:51 [<ffffffff812b808f>] __warn+0x19f/0x1e0 kernel/panic.c:550 [<ffffffff812b831c>] warn_slowpath_null+0x2c/0x40 kernel/panic.c:585 [<ffffffff830fcb13>] dummy_free_request+0x153/0x170 drivers/usb/gadget/udc/dummy_hcd.c:672 [<ffffffff830ed1b0>] usb_ep_free_request+0xc0/0x420 drivers/usb/gadget/udc/core.c:195 [<ffffffff83225031>] gadgetfs_unbind+0x131/0x190 drivers/usb/gadget/legacy/inode.c:1612 [<ffffffff830ebd8f>] usb_gadget_remove_driver+0x10f/0x2b0 drivers/usb/gadget/udc/core.c:1228 [<ffffffff830ec084>] usb_gadget_unregister_driver+0x154/0x240 drivers/usb/gadget/udc/core.c:1357 This patch fixes the problem by iterating over all the endpoints in the driver's ep array instead of iterating over the gadget's ep_list, which explicitly leaves out ep0. Signed-off-by:
-
Krzysztof Opasiak authored
commit 7e4da3fc upstream. By convention (according to doc) if function does not provide get_alt() callback composite framework should assume that it has only altsetting 0 and should respond with error if host tries to set other one. After commit dd4dff8b ("USB: composite: Fix bug: should test set_alt function pointer before use it") we started checking set_alt() callback instead of get_alt(). This check is useless as we check if set_alt() is set inside usb_add_function() and fail if it's NULL. Let's fix this check and move comment about why we check the get method instead of set a little bit closer to prevent future false fixes. Fixes: dd4dff8b ("USB: composite: Fix bug: should test set_alt function pointer before use it") Signed-off-by:
Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by:
-
Felipe Balbi authored
commit d6214592 upstream. commit 0416e494 ("usb: dwc3: ep0: correct cache sync issue in case of ep0_bounced") introduced a bug where we would leak DMA resources which would cause us to starve the system of them resulting in failing DMA transfers. Fix the bug by making sure that we always unmap EP0 requests since those are *always* mapped. Fixes: 0416e494 ("usb: dwc3: ep0: correct cache sync issue in case of ep0_bounced") Tested-by:
Tomasz Medrek <tomaszx.medrek@intel.com> Reported-by:
Janusz Dziedzic <januszx.dziedzic@linux.intel.com> Signed-off-by:
-
Felipe Balbi authored
commit 19ec3123 upstream. Let's call dwc3_ep0_prepare_one_trb() explicitly because there are occasions where we will need more than one TRB to handle an EP0 transfer. A follow-up patch will fix one bug related to multiple-TRB Data Phases when it comes to mapping/unmapping requests for DMA. Reported-by:
-
Felipe Balbi authored
commit 7931ec86 upstream. For now this is just a cleanup patch, no functional changes. We will be using the new function to fix a bug introduced long ago by commit 0416e494 ("usb: dwc3: ep0: correct cache sync issue in case of ep0_bounced") and further worsened by commit c0bd5456 ("usb: dwc3: ep0: handle non maxpacket aligned transfers > 512") Reported-by:
-
Hauke Mehrtens authored
commit 73529c87 upstream. The xway_nand driver accesses the ltq_ebu_membase symbol which is not exported. This also should not get exported and we should handle the EBU interface in a better way later. This quick fix just deactivated support for building as module. Fixes: 99f2b107 ("mtd: lantiq: Add NAND support on Lantiq XWAY SoC.") Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
-
Vladimir Zapolskiy authored
commit af92305e upstream. On i.MX31 AVIC interrupt controller base address is at 0x68000000. The problem was shadowed by the AVIC driver, which takes the correct base address from a SoC specific header file. Fixes: d2a37b3d ("ARM i.MX31: Add devicetree support") Signed-off-by:
Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Reviewed-by:
Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Leon Romanovsky authored
commit c1d5f8ff upstream. This patch removes BUG_ON() macro from mlx4_alloc_icm_coherent() by checking DMA address alignment in advance and performing proper folding in case of error. Fixes: 5b0bf5e2 ("mlx4_core: Support ICM tables in coherent memory") Reported-by:
Ozgur Karatas <okaratas@member.fsf.org> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Eugenia Emantayev authored
commit 6496bbf0 upstream. Single send WQE in RX buffer should be stamped with software ownership in order to prevent the flow of QP in error in FW once UPDATE_QP is called. Fixes: 9f519f68 ('mlx4_en: Not using Shared Receive Queues') Signed-off-by:
Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by:
-
Jack Morgenstein authored
commit 3b01fe7f upstream. mlx4_QP_FLOW_STEERING_DETACH_wrapper first removes the steering rule (which results in freeing the rule structure), and then references a field in this struct (the qp number) when releasing the busy-status on the rule's qp. Since this memory was freed, it could reallocated and changed. Therefore, the qp number in the struct may be incorrect, so that we are releasing the incorrect qp. This leaves the rule's qp in the busy state (and could possibly release an incorrect qp as well). Fix this by saving the qp number in a local variable, for use after removing the steering rule. Fixes: 2c473ae7 ("net/mlx4_core: Disallow releasing VF QPs which have steering rules") Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
-
Florian Fainelli authored
commit b2eb09af upstream. Commit 57016590 ("net: stmmac: Fix race between stmmac_drv_probe and stmmac_open") re-ordered how the MDIO bus registration and the network device are registered, but missed to unwind the MDIO bus registration in case we fail to register the network device. Fixes: 57016590 ("net: stmmac: Fix race between stmmac_drv_probe and stmmac_open") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Acked-by:
Kweh, Hock Leong <hock.leong.kweh@intel.com> Signed-off-by:
-
Florian Fainelli authored
commit 57016590 upstream. There is currently a small window during which the network device registered by stmmac can be made visible, yet all resources, including and clock and MDIO bus have not had a chance to be set up, this can lead to the following error to occur: [ 473.919358] stmmaceth 0000:01:00.0 (unnamed net_device) (uninitialized): stmmac_dvr_probe: warning: cannot get CSR clock [ 473.919382] stmmaceth 0000:01:00.0: no reset control found [ 473.919412] stmmac - user ID: 0x10, Synopsys ID: 0x42 [ 473.919429] stmmaceth 0000:01:00.0: DMA HW capability register supported [ 473.919436] stmmaceth 0000:01:00.0: RX Checksum Offload Engine supported [ 473.919443] stmmaceth 0000:01:00.0: TX Checksum insertion supported [ 473.919451] stmmaceth 0000:01:00.0 (unnamed net_device) (uninitialized): Enable RX Mitigation via HW Watchdog Timer [ 473.921395] libphy: PHY stmmac-1:00 not found [ 473.921417] stmmaceth 0000:01:00.0 eth0: Could not attach to PHY [ 473.921427] stmmaceth 0000:01:00.0 eth0: stmmac_open: Cannot attach to PHY (error: -19) [ 473.959710] libphy: stmmac: probed [ 473.959724] stmmaceth 0000:01:00.0 eth0: PHY ID 01410cc2 at 0 IRQ POLL (stmmac-1:00) active [ 473.959728] stmmaceth 0000:01:00.0 eth0: PHY ID 01410cc2 at 1 IRQ POLL (stmmac-1:01) [ 473.959731] stmmaceth 0000:01:00.0 eth0: PHY ID 01410cc2 at 2 IRQ POLL (stmmac-1:02) [ 473.959734] stmmaceth 0000:01:00.0 eth0: PHY ID 01410cc2 at 3 IRQ POLL (stmmac-1:03) Fix this by making sure that register_netdev() is the last thing being done, which guarantees that the clock and the MDIO bus are available. Fixes: 4bfcbd7a ("stmmac: Move the mdio_register/_unregister in probe/remove") Reported-by:
-
Florian Fainelli authored
commit e6afb1ad upstream. Commit beb0babf ("korina: disable napi on close and restart") introduced calls to napi_disable() that were missing before, unfortunately this leaves a small window during which NAPI has a chance to run, yet we just freed resources since korina_free_ring() has been called: Fix this by disabling NAPI first then freeing resource, and make sure that we also cancel the restart task before doing the resource freeing. Fixes: beb0babf ("korina: disable napi on close and restart") Reported-by:
Alexandros C. Couloumbis <alex@ozo.com> Signed-off-by:
-
Daniel Borkmann authored
commit 628185cf upstream. Shahar reported a soft lockup in tc_classify(), where we run into an endless loop when walking the classifier chain due to tp->next == tp which is a state we should never run into. The issue only seems to trigger under load in the tc control path. What happens is that in tc_ctl_tfilter(), thread A allocates a new tp, initializes it, sets tp_created to 1, and calls into tp->ops->change() with it. In that classifier callback we had to unlock/lock the rtnl mutex and returned with -EAGAIN. One reason why we need to drop there is, for example, that we need to request an action module to be loaded. This happens via tcf_exts_validate() -> tcf_action_init/_1() meaning after we loaded and found the requested action, we need to redo the whole request so we don't race against others. While we had to unlock rtnl in that time, thread B's request was processed next on that CPU. Thread B added a new tp instance successfully to the classifier chain. When thread A returned grabbing the rtnl mutex again, propagating -EAGAIN and destroying its tp instance which never got linked, we goto replay and redo A's request. This time when walking the classifier chain in tc_ctl_tfilter() for checking for existing tp instances we had a priority match and found the tp instance that was created and linked by thread B. Now calling again into tp->ops->change() with that tp was successful and returned without error. tp_created was never cleared in the second round, thus kernel thinks that we need to link it into the classifier chain (once again). tp and *back point to the same object due to the match we had earlier on. Thus for thread B's already public tp, we reset tp->next to tp itself and link it into the chain, which eventually causes the mentioned endless loop in tc_classify() once a packet hits the data path. Fix is to clear tp_created at the beginning of each request, also when we replay it. On the paths that can cause -EAGAIN we already destroy the original tp instance we had and on replay we really need to start from scratch. It seems that this issue was first introduced in commit 12186be7 ("net_cls: fix unconfigured struct tcf_proto keeps chaining and avoid kernel panic when we use cls_cgroup"). Fixes: 12186be7 ("net_cls: fix unconfigured struct tcf_proto keeps chaining and avoid kernel panic when we use cls_cgroup") Reported-by:
Shahar Klein <shahark@mellanox.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Cc: Cong Wang <xiyou.wangcong@gmail.com> Acked-by:
Eric Dumazet <edumazet@google.com> Tested-by:
-
Chris Brandt authored
commit e2a33c34 upstream. The RZ/A1 is different than the other Renesas SOCs because the MSTP registers are 8-bit instead of 32-bit and if you try writing values as 32-bit nothing happens...meaning this driver never worked for r7s72100. Fixes: b6face40 ("ARM: shmobile: r7s72100: add essential clock nodes to dtsi") Signed-off-by:
Chris Brandt <chris.brandt@renesas.com> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Tested-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> [bwh: Backported to 3.16: adjust filename] Signed-off-by:
-
Arnd Bergmann authored
commit c739c0a7 upstream. A rare randconfig build failure shows up in this driver when the CRC32 helper is not there: drivers/media/built-in.o: In function `s5k4ecgx_s_power': s5k4ecgx.c:(.text+0x9eb4): undefined reference to `crc32_le' This adds the 'select' that all other users of this function have. Fixes: 8b99312b ("[media] Add v4l2 subdev driver for S5K4ECGX sensor") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Marcos Paulo de Souza authored
commit 41c567a5 upstream. Avoid AUX loopback in Pegatron C15B touchpad, so input subsystem is able to recognize a Synaptics touchpad in the AUX port. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=93791 (Touchpad is not detected on DNS 0801480 notebook (PEGATRON C15B)) Suggested-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
Marcos Paulo de Souza <marcos.souza.org@gmail.com> Signed-off-by:
-
Larry Finger authored
commit 8ae679c4 upstream. I am getting the following warning when I build kernel 4.9-git on my PowerBook G4 with a 32-bit PPC processor: AS arch/powerpc/kernel/misc_32.o arch/powerpc/kernel/misc_32.S:299:7: warning: "CONFIG_FSL_BOOKE" is not defined [-Wundef] This problem is evident after commit 989cea5c ("kbuild: prevent lib-ksyms.o rebuilds"); however, this change in kbuild only exposes an error that has been in the code since 2005 when this source file was created. That was with commit 9994a338 ("powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S"). The offending line does not make a lot of sense. This error does not seem to cause any errors in the executable, thus I am not recommending that it be applied to any stable versions. Thanks to Nicholas Piggin for suggesting this solution. Fixes: 9994a338 ("powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S") Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Aleksa Sarai authored
commit 613cc2b6 upstream. If you have a process that has set itself to be non-dumpable, and it then undergoes exec(2), any CLOEXEC file descriptors it has open are "exposed" during a race window between the dumpable flags of the process being reset for exec(2) and CLOEXEC being applied to the file descriptors. This can be exploited by a process by attempting to access /proc/<pid>/fd/... during this window, without requiring CAP_SYS_PTRACE. The race in question is after set_dumpable has been (for get_link, though the trace is basically the same for readlink): [vfs] -> proc_pid_link_inode_operations.get_link -> proc_pid_get_link -> proc_fd_access_allowed -> ptrace_may_access(task, PTRACE_MODE_READ_FSCREDS); Which will return 0, during the race window and CLOEXEC file descriptors will still be open during this window because do_close_on_exec has not been called yet. As a result, the ordering of these calls should be reversed to avoid this race window. This is of particular concern to container runtimes, where joining a PID namespace with file descriptors referring to the host filesystem can result in security issues (since PRCTL_SET_DUMPABLE doesn't protect against access of CLOEXEC file descriptors -- file descriptors which may reference filesystem objects the container shouldn't have access to). Cc: dev@opencontainers.org Reported-by:
Michael Crosby <crosbymichael@gmail.com> Signed-off-by:
Aleksa Sarai <asarai@suse.de> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Hans de Goede authored
commit bb98e72a upstream. On my Cherrytrail CUBE iwork8 Air tablet PIPE-A would get stuck on loading i915 at boot 1 out of every 3 boots, resulting in a non functional LCD. Once the i915 driver has successfully loaded, the panel can be disabled / enabled without hitting this issue. The getting stuck is caused by vlv_init_display_clock_gating() clearing the DPOUNIT_CLOCK_GATE_DISABLE bit in DSPCLK_GATE_D when called from chv_pipe_power_well_ops.enable() on driver load, while a pipe is enabled driving the DSI LCD by the BIOS. Clearing this bit while DSI is in use is a known issue and intel_dsi_pre_enable() / intel_dsi_post_disable() already set / clear it as appropriate. This commit modifies vlv_init_display_clock_gating() to leave the DPOUNIT_CLOCK_GATE_DISABLE bit alone fixing the pipe getting stuck. Changes in v2: -Replace PIPE-A with "a pipe" or "the pipe" in the commit msg and comment Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97330Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161202142904.25613-1-hdegoede@redhat.comSigned-off-by:
Jani Nikula <jani.nikula@intel.com> [bwh: Backported to 3.16: adjust filename, context] Signed-off-by:
-
