- 27 Feb, 2020 9 commits
-
-
Vasily Khoruzhick authored
We don't want to print scary message if devm_regulator_get() returns -EPROBE_DEFER Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20200226081011.1347245-3-anarsoul@gmail.com
-
Gurchetan Singh authored
The plan is use have both shmem and virtual "vram" running side-by-side in virtio-gpu. It looks like we'll eventually use struct drm_gem_object as a base class, and we'll need to convert to shmem and vram objects on the fly. As a first step, add a virtio_gpu_is_shmem helper. Thanks to kraxel for suggesting this approach on Gitlab. Suggested-by:
Gerd Hoffman <kraxel@redhat.com> Signed-off-by:
Gurchetan Singh <gurchetansingh@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/20200227002601.745-3-gurchetansingh@chromium.orgSigned-off-by:
-
Gurchetan Singh authored
This is a very, very minor cleanup. Signed-off-by:
-
Tian Tao authored
use the drm_fb_helper_remove_conflicting_pci_framebuffer to remove the framebuffer initialized by fireware/bootloader to avoid resource conflict. Signed-off-by:
Tian Tao <tiantao6@hisilicon.com> Acked-by:
Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by:
Xinliang Liu <xinliang.liu@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/1582524112-5628-1-git-send-email-tiantao6@hisilicon.com
-
Tian Tao authored
set the preferred mode resolution to 1024 * 768 and maximum resolution to 1920 * 1200. Signed-off-by:
Gong junjie <gongjunjie2@huawei.com> Signed-off-by:
-
Tian Tao authored
add mode_valid function, we can make sure the resolution is valid. Signed-off-by:
-
Tian Tao authored
The maximum resolution supported by hibmc is 1920 * 1200 instead of 1920 * 1440, this patch fixed this problem Signed-off-by:
-
Tian Tao authored
set the prefer_shadow as 1,so we use the shadowfb to acceleration. Signed-off-by:
-
Tian Tao authored
Add the three new pll config for corresponding resolution 1440x900 and 1600x900, 640x480 for hibmc Signed-off-by:
-
- 26 Feb, 2020 31 commits
-
-
Laurent Pinchart authored
The omap_dss_device .pre_enable(), .post_disable() and .set_timings() are not used anymore. Remove them. Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Tested-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by:
-
Laurent Pinchart authored
The omapdss_of_find_connected_device() function isn't used anymore, remove it. Signed-off-by:
-
Laurent Pinchart authored
Inline the omapdss_display_get() in its only caller to simplify the code. Signed-off-by:
-
Laurent Pinchart authored
The omap_connector implementation is now used for DSI only. Hardcode its type and drop unused code. Signed-off-by:
-
Laurent Pinchart authored
In order to integrate with a chain of drm_bridge, the internal SDI output has to expose its operations through the drm_bridge API. Register a bridge at initialisation time to do so and remove the omap_dss_device operations that are now unused. Signed-off-by:
-
Laurent Pinchart authored
This makes it easier to quickly locate duplicate includes. Signed-off-by:
-
Laurent Pinchart authored
In order to integrate with a chain of drm_bridge, the internal DPI output has to expose its operations through the drm_bridge API. Register a bridge at initialisation time to do so and remove the omap_dss_device operations that are now unused. Signed-off-by:
-
Laurent Pinchart authored
The dpi_set_pll_clk() and dpi_set_dispc_clk() return various information through pointer arguments that are never used by the callers. Remove them to simplify the clock setting API. Signed-off-by:
-
Laurent Pinchart authored
Group functions based on their purpose and split them in sections to make the source code easier to navigate. No functional change is included. Signed-off-by:
-
Laurent Pinchart authored
This makes it easier to quickly locate duplicate includes. Signed-off-by:
-
Laurent Pinchart authored
Now that the omap_dss_device EDID read operation has been removed, simplify the bridge-based EDID access by merging multiple functions together. Signed-off-by:
-
Laurent Pinchart authored
Now that the omap_dss_device EDID read operation has been removed, simplify the bridge-based EDID access by merging multiple functions together. Signed-off-by:
-
Laurent Pinchart authored
Now that the VENC output is driven fully through the drm_bridge API its omap_dss_device operations are not used anymore. Remove them. Signed-off-by:
-
Laurent Pinchart authored
Now that the HDMI outputs are driven fully through the drm_bridge API their omap_dss_device operations are not used anymore. Remove them. Signed-off-by:
-
Laurent Pinchart authored
Due to the removal of several omapdrm display drivers, the omapdss HPD, detected and EDID operations are not used anymore. Remove them and all related code. Signed-off-by:
-
Laurent Pinchart authored
The TPD12S015, OPA362 and analog and HDMI connectors are now supported by DRM bridge drivers, and the omapdrm HDMI and VENC outputs can be handled through the drm_bridge API. Switch the outputs to drm_bridge by making the next bridge mandatory and removing the related omapdrm-specific display drivers. Signed-off-by:
-
Laurent Pinchart authored
Use the drm_bridge_connector helper to create a connector for pipelines that use drm_bridge. This allows splitting connector operations across multiple bridges when necessary, instead of having the last bridge in the chain creating the connector and handling all connector operations internally. Signed-off-by:
-
Laurent Pinchart authored
In order to integrate with a chain of drm_bridge, the internal VENC encoder has to expose the mode valid, fixup and set, the enable and disable and the get modes operations through the drm_bridge API. Register a bridge at initialisation time to do so. Most of those operations are removed from the omap_dss_device as they are now called through the drm_bridge API by the DRM atomic helpers. The only exception is the .get_modes() operation that is still invoked through the omap_dss_device-based pipeline. For the time being make the next bridge in the chain optional as the VENC output is still based on omap_dss_device. The create_connector argument to the bridge attach function is also ignored for the same reason. This will be changed later when removing the related omapdrm-specific display drivers. Signed-off-by:
-
Laurent Pinchart authored
The omapdss_hdmi_ops .set_hdmi_mode() and .set_infoframe() operations operations are not used anymore, remove them. Signed-off-by:
-
Laurent Pinchart authored
The HDMI4 encoder is transitioning to the drm_bridge API, implement the last missing operation. Signed-off-by:
-
Laurent Pinchart authored
Move the omap_dss_device .set_timings(), .enable() and .disable() operations to the drm_bridge functions. As the drm_bridge for the HDMI encoder is unconditionally registered and attached, those operations will be called at the appropriate time. The omapdss device .set_infoframe() and .set_hdmi_mode() operations have no equivalent in drm_bridge. Thir content is thus moved to the bridge .enable() operation as the data they store is not needed before the HDMI encoder gets enabled. Signed-off-by:
-
Laurent Pinchart authored
Move the omap_dss_device .set_timings(), .enable() and .disable() operations to the drm_bridge functions. As the drm_bridge for the HDMI encoder is unconditionally registered and attached, those operations will be called at the appropriate time. The omapdss device .set_infoframe() and .set_hdmi_mode() operations have no equivalent in drm_bridge. Thir content is thus moved to the bridge .enable() operation as the data they store is not needed before the HDMI encoder gets enabled. Signed-off-by:
-
Laurent Pinchart authored
In order to integrate with a chain of drm_bridge, the internal HDMI5 encoder has to expose the EDID read operation through the drm_bridge API. Register a bridge at initialisation time to do so. For the time being make the next bridge in the chain optional as the HDMI output is still based on omap_dss_device. The create_connector argument to the bridge attach function is also ignored for the same reason. This will be changed later when removing the related omapdrm-specific display drivers. Signed-off-by:
-
Laurent Pinchart authored
In order to integrate with a chain of drm_bridge, the internal HDMI4 encoder has to expose the EDID read operation through the drm_bridge API. Register a bridge at initialisation time to do so. For the time being make the next bridge in the chain optional as the HDMI output is still based on omap_dss_device. The create_connector argument to the bridge attach function is also ignored for the same reason. This will be changed later when removing the related omapdrm-specific display drivers. Signed-off-by:
-
Laurent Pinchart authored
In preparation of adding DRM bridge support to the hdmi5 encoder code, rework the EDID read to isolate data read. The hdmi_read_edid() function is the main entry point. It performs all initialisation steps required prior to reading the EDID (such as ensuring the device is powered on), as well as corresponding cleanup steps afterwards. EDID read itself is handled by hdmi_read_edid_data() that calls the hdmi5_core_ddc_read() function to read individual blocks. This new code architecture will allow reusing hdmi_read_edid() and hdmi5_core_ddc_read() for the drm_bridge EDID read implementation, while swapping out hdmi_read_edid_data() for the DRM drm_do_get_edid() function. Signed-off-by:
-
Laurent Pinchart authored
In preparation of adding DRM bridge support to the hdmi4 encoder code, rework the EDID read to isolate data read. The hdmi_read_edid() function is the main entry point. It performs all initialisation steps required prior to reading the EDID (such as ensuring the device is powered on), as well as corresponding cleanup steps afterwards. EDID read itself is handled by hdmi_read_edid_data() that calls the hdmi4_core_ddc_read() function to read individual blocks. This new code architecture will allow reusing hdmi_read_edid() and hdmi4_core_ddc_read() for the drm_bridge EDID read implementation, while swapping out hdmi_read_edid_data() for the DRM drm_do_get_edid() function. Signed-off-by:
-
Laurent Pinchart authored
Bring the omapdss-specific .read_edid() operation in sync with the drm_bridge .get_edid() operation to ease code reuse. Signed-off-by:
-
Laurent Pinchart authored
As part of the move to drm_bridge ops, the dssdev ops will become empty for some of the internal encoders. Make them optional in the driver to allow them to be removed completely, easing the transition. Signed-off-by:
-
Laurent Pinchart authored
In order to support drm_bridge-based pipeline, the internal HDMI encoders will need to expose the EDID read operation through the drm_bridge API, and thus to expose a drm_bridge instance corresponding to the encoder. The HDMI encoders are however handled as omap_dss_device instances, which conflicts with this requirement. In order to move forward with the drm_bridge transition, add support for creating drm_bridge instances local to DSS outputs. If a local bridge is passed to the omapdss_device_init_output() function, it is used as the first bridge in the chain, and the omap_dss_device.next_bridge field is set to the next bridge for the use of the internal encoders' bridges. Signed-off-by:
-
Laurent Pinchart authored
The DSS core looks up the next device connected to an output by traversing the OF graph. It currently hardcodes the local port number to 0, which breaks any output with a different port number (SDI on OMAP3 and any DPI output but the first one). Fix this by repurposing the currently unused of_ports bitmask in omap_dss_device with an of_port output port number, and use it to traverse the OF graph. Signed-off-by:
-
Laurent Pinchart authored
Replace the manual panel handling code by a drm_panel_bridge. This simplifies the driver and allows all components in the display pipeline to be treated as bridges, paving the way to generic connector handling. Signed-off-by:
-
