- 03 Sep, 2015 5 commits
-
-
Jubin John authored
3 CSRs needed by the CONFIG_SDMA_VERBOSITY code were removed during the CSR clean up. Adding these CSRs back to resolve 0-day build failure: https://lists.01.org/pipermail/kbuild-all/2015-August/011919.htmlReviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Jubin John <jubin.john@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Sagi Grimberg authored
Since patch series "Demux IB CM requests in the rdma_cm module" the P_Key index is taken from the work completion rather than the message itself. The HCA provides us with the message P_Key. In order to provide the P_Key index, we need to look it up. Given that this is relevant only for GSI messages (session establishments) which is less performance critical, micro-optimize against the GSI (is_qp1) branch. Fixes: 4c21b5bc ("IB/cma: Add net_dev and private data checks to RDMA CM") Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Haggai Eran authored
The mlx5_ib_reg_user_mr() function will attempt to call clean_mr() in its error flow even though there is never a case where the error flow occurs with a valid MR pointer to destroy. Remove the clean_mr() call and the incorrect comment above it. Fixes: b4cfe447 ("IB/mlx5: Implement on demand paging by adding support for MMU notifiers") Cc: Eli Cohen <eli@mellanox.com> Signed-off-by: Haggai Eran <haggaie@mellanox.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Christoph Hellwig authored
We have many WR opcodes that are only supported in kernel space and/or require optional information to be copied into the WR structure. Reject all those not explicitly handled so that we can't pass invalid information to drivers. Cc: stable@vger.kernel.org Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Nicholas Krause authored
This fixes an if statement checking the return value of the function get_lladdr for success in the function pick_local_ip6addrs to instead of directly checking the return value of this call check the opposite as get_lladdr returns zero for success which would incorrectly make this if statement block not execute with the current if statement check. Signed-off-by: Nicholas Krause <xerofoify@gmail.com> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
- 02 Sep, 2015 1 commit
-
-
Kaike Wan authored
The flags to ibnl_put_msg should be NLM_F_REQUEST instead of GFP_KERNEL. Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: John Fleck <john.fleck@intel.com> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
- 30 Aug, 2015 34 commits
-
-
Yishai Hadas authored
Currently, IB/cma remove_one flow blocks until all user descriptor managed by IB/ucma are released. This prevents hot-removal of IB devices. This patch allows IB/cma to remove devices regardless of user space activity. Upon getting the RDMA_CM_EVENT_DEVICE_REMOVAL event we close all the underlying HW resources for the given ucontext. The ucontext itself is still alive till its explicit destroying by its creator. Running applications at that time will have some zombie device, further operations may fail. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Shachar Raindel <raindel@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Yishai Hadas authored
Implements the IB core disassociate_ucontext API. The driver detaches the HW resources for a given user context to prevent a dependency between application termination and device disconnecting. This is done by managing the VMAs that were mapped to the HW bars such as door bell and blueflame. When need to detach remap them to an arbitrary kernel page returned by the zap API. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Yishai Hadas authored
Enables the uverbs_remove_one to succeed despite the fact that there are running IB applications working with the given ib device. This functionality enables a HW device to be unbind/reset despite the fact that there are running user space applications using it. It exposes a new IB kernel API named 'disassociate_ucontext' which lets a driver detaching its HW resources from a given user context without crashing/terminating the application. In case a driver implemented the above API and registered with ib_uverb there will be no dependency between its device to its uverbs_device. Upon calling remove_one of ib_uverbs the call should return after disassociating the open HW resources without waiting to clients disconnecting. In case driver didn't implement this API there will be no change to current behaviour and uverbs_remove_one will return only when last client has disconnected and reference count on uverbs device became 0. In case the lower driver device was removed any application will continue working over some zombie HCA, further calls will ended with an immediate error. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Shachar Raindel <raindel@mellanox.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Yishai Hadas authored
Done in preparation for deploying RCU for the device removal flow. Allows isolating the RCU handling to the uverb_main layer and keeping the uverbs_cmd code as is. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Shachar Raindel <raindel@mellanox.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Yishai Hadas authored
Fixes: 2a72f212 ("IB/uverbs: Remove dev_table") Before this commit there was a device look-up table that was protected by a spin_lock used by ib_uverbs_open and by ib_uverbs_remove_one. When it was dropped and container_of was used instead, it enabled the race with remove_one as dev might be freed just after: dev = container_of(inode->i_cdev, struct ib_uverbs_device, cdev) but before the kref_get. In addition, this buggy patch added some dead code as container_of(x,y,z) can never be NULL and so dev can never be NULL. As a result the comment above ib_uverbs_open saying "the open method will either immediately run -ENXIO" is wrong as it can never happen. The solution follows Jason Gunthorpe suggestion from below URL: https://www.mail-archive.com/linux-rdma@vger.kernel.org/msg25692.html cdev will hold a kref on the parent (the containing structure, ib_uverbs_device) and only when that kref is released it is guaranteed that open will never be called again. In addition, fixes the active count scheme to use an atomic not a kref to prevent WARN_ON as pointed by above comment from Jason. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Shachar Raindel <raindel@mellanox.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Yishai Hadas authored
Fix the reference counting usage to be handled in the event file creation/destruction function, instead of being done by the caller. This is done for both async/non-async event files. Based on Jason Gunthorpe report at https://www.mail-archive.com/ linux-rdma@vger.kernel.org/msg24680.html: "The existing code for this is broken, in ib_uverbs_get_context all the error paths between ib_uverbs_alloc_event_file and the kref_get(file->ref) are wrong - this will result in fput() which will call ib_uverbs_event_close, which will try to do kref_put and ib_unregister_event_handler - which are no longer paired." Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Shachar Raindel <raindel@mellanox.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Jason Gunthorpe authored
The majority of callers never check the return value, and even if they did, they can't do anything about a failure. All possible failure cases represent a bug in the caller, so just WARN_ON inside the function instead. This fixes a few random errors: net/rd/iw.c infinite loops while it fails. (racing with EBUSY?) This also lays the ground work to get rid of error return from the drivers. Most drivers do not error, the few that do are broken since it cannot be handled. Since uverbs can legitimately make use of EBUSY, open code the check. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Bart Van Assche authored
The SRP initiator only needs this if the insecure register_always=N performance optimization is enabled, or if FRWR/FMR is not supported in the driver. Do not create an all physical MR unless it is needed to support either of those modes. Default register_always to true so the out of the box configuration does not create an insecure all physical MR. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> [bvanassche: reworked and rebased this patch] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Bart Van Assche authored
Instead of always using the global rkey for the indirect data buffer descriptor, register that descriptor with the HCA if the kernel module parameter register_always has been set to Y. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Bart Van Assche authored
Introduce the variable srp_device.use_fmr. Leave out the dev->has_fr / dev->has_fmr and ch->fr_pool / ch->fmr_pool checks since these are redundant. This patch does not change any functionality but makes the source code easier to read. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Bart Van Assche authored
Move the srp_map_desc() call from inside srp_map_sg_entry() to srp_map_sg() such that the use_mr argument can be removed from srp_map_sg_entry(). Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Bart Van Assche authored
Mapping a discontiguous sg-list requires multiple memory regions and hence can exhaust the memory region pool. The SRP initiator already handles this by temporarily reducing the queue depth. This means that it is safe to remove the memory registration backtracking code. This patch has been tested with direct I/O sizes up to 256 MB. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Bart Van Assche authored
Although most paths through which a request is submitted check block layer parameters like the max_segments limit, these are not checked when an SG_IO or direct I/O request is submitted. Hence add a range check for the memory descriptor array pointer. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Bart Van Assche authored
Instead of using the global rkey for large memory regions, use multiple registrations. See also the while (dma_len) loop further down in srp_map_sg_entry(). Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Bart Van Assche authored
During a discussion in 2011 nobody recalled why FMR was not used for non-page aligned buffers (see also http://thread.gmane.org/gmane.linux.drivers.rdma/7149). Re-enable FMR for such buffers. For the reason why the srp_map_fmr() function needs to be modified, see also patch "IB/srp: rework mapping engine to use multiple FMR entries" (commit ID 8f26c9ff; January 2011). Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Jason Gunthorpe authored
The pd now has a local_dma_lkey member which completely replaces ib_get_dma_mr, use it instead. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Jason Gunthorpe authored
The pd now has a local_dma_lkey member which completely replaces ib_get_dma_mr, use it instead. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: Dominique Martinet <dominique.martinet@cea.fr> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Jason Gunthorpe authored
The pd now has a local_dma_lkey member which completely replaces ib_get_dma_mr, use it instead. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Jason Gunthorpe authored
Replace all leys with pd->local_dma_lkey. This driver does not support iWarp, so this is safe. The insecure use of ib_get_dma_mr is thus isolated to an rkey, and will have to be fixed separately. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Jason Gunthorpe authored
The pd now has a local_dma_lkey member which completely replaces ib_get_dma_mr, use it instead. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Jason Gunthorpe authored
Replace all leys with pd->local_dma_lkey. This driver does not support iWarp, so this is safe. The insecure use of ib_get_dma_mr is thus isolated to an rkey, and this looks trivially fixed by forcing the use of registration in a future patch. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Jason Gunthorpe authored
The pd now has a local_dma_lkey member which completely replaces ib_get_dma_mr, use it instead. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Jason Gunthorpe authored
The pd now has a local_dma_lkey member which completely replaces ib_get_dma_mr, use it instead. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Jason Gunthorpe authored
The pd now has a local_dma_lkey member which completely replaces ib_get_dma_mr, use it instead. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Jason Gunthorpe authored
The pd now has a local_dma_lkey member which completely replaces ib_get_dma_mr, use it instead. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Jason Gunthorpe authored
Every single ULP requires a local_dma_lkey to do anything with a QP, so let us ensure one exists for every PD created. If the driver can supply a global local_dma_lkey then use that, otherwise ask the driver to create a local use all physical memory MR associated with the new PD. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Sagi Grimberg <sagig@dev.mellanox.co.il> Acked-by: Christoph Hellwig <hch@infradead.org> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Tested-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Sagi Grimberg authored
Chaning of send work requests benefits performance by reducing the send queue lock contention (acquired in ib_post_send) and saves us HW doorbells which is posted only once. Currently, in normal IO flows iser does not chain the CDB send work request with the registration work request. Also in PI flows, signature work requests are not chained as well. Lets chain those and post only once. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Sagi Grimberg authored
Easier to debug when we have the registration details. This patch does not change any functionality. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Adir Lev <adirl@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Sagi Grimberg authored
iser support up to 512KB data transfer in a single scsi command. This means that larger IOs will split to different request. While iser can easily saturate FDR/EDR wires, some arrays are fine tuned for 1MB (or larger) IO sizes, hence add an option to support larger transfers (up to 8MB) if the device allows it. Given that a few target implementations don't support data transfers of more than 512KB by default and the fact that larger IO sizes require more resources, we introduce a module parameter to determine the maximum number of 512B sectors in a single scsi command. Users that are interested in larger transfers can change this value given that the target supports larger transfers. At the moment, iser works in 4K pages granularity, In a later stage we will get it to work with system page size instead. IO operations that consists of N pages will need a page vector of size N+1 in case the first SG element contains an offset. Given that some devices allocates memory regions in powers of 2, this means that allocating a region with N+1 pages, will result in region resources allocation of the next power of 2. Since we don't want that to happen, in case we are in the limit of IO size supported and the first SG element has an offset, we align the SG list using a bounce buffer (which is OK given that this is not likely to happen a lot). Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Sagi Grimberg authored
Hard coded for now. This will allow to allocate different sized MRs depending on the IO size needed (and device capabilities). This patch does not change any functionality. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Sagi Grimberg authored
iser_reg_rdma_mem_[fastreg|fmr] share a lot of code, and logically do the same thing other than the buffer registration method itself (iser_fast_reg_mr vs. iser_fast_reg_fmr). The DIF logic is not implemented in the FMR flow as there is no existing device that supports FMRs and Signature feature. This patch unifies the flow in a single routine iser_reg_rdma_mem and just split to fmr/frwr for the buffer registration itself. Also, for symmetry reasons, unify iser_unreg_rdma_mem (which will call the relevant device specific unreg routine). Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Adir Lev <adirl@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Sagi Grimberg authored
As for fmrs we will hold a single registration descriptor as no need for multiple like in the frwr mode (descriptor for each task). This change helps unifying the duplicate registration code paths. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Adir Lev <adirl@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Sagi Grimberg authored
Also, change a name of a local variable. This patch does not change any functionality. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Adir Lev <adirl@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Adir Lev authored
This will allow us to unify the memory registration code path between the various methods which vary by the device capabilities. This change will make it easier and less intrusive to remove fmr_pools from the code when we'd want to. The reason we use a single descriptor is to avoid taking a redundant spinlock when working with FMRs. We also change the signature of iser_reg_page_vec to make it match iser_fast_reg_mr (and the future indirect registration method). Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Adir Lev <adirl@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-