- 03 Aug, 2016 6 commits
-
-
Darrick J. Wong authored
Add some function pointers to bc_ops to get the btree keys for leaf and node blocks, and to update parent keys of a block. Convert the _btree_updkey calls to use our new pointer, and modify the tree shape changing code to call the appropriate get_*_keys pointer instead of _btree_copy_keys because the overlapping btree has to calculate high key values. Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by:
Brian Foster <bfoster@redhat.com> Signed-off-by:
Dave Chinner <david@fromorbit.com>
-
Darrick J. Wong authored
When a btree block has to be split, we pass the new block's ptr from xfs_btree_split() back to xfs_btree_insert() via a pointer parameter; however, we pass the block's key through the cursor's record. It is a little weird to "initialize" a record from a key since the non-key attributes will have garbage values. When we go to add support for interval queries, we have to be able to pass the lowest and highest keys accessible via a pointer. There's no clean way to pass this back through the cursor's record field. Therefore, pass the key directly back to xfs_btree_insert() the same way that we pass the btree_ptr. As a bonus, we no longer need init_rec_from_key and can drop it from the codebase. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Darrick J. Wong authored
If we make the inode root block of a btree unfull by expanding the root, we must set *stat to 1 to signal success, rather than leaving it uninitialized. Signed-off-by:
-
Darrick J. Wong authored
When we're deleting realtime extents, we need to lock the summary inode in case we need to update the summary info to prevent an assert on the rsumip inode lock on a debug kernel. While we're at it, fix the locking annotations so that we avoid triggering lockdep warnings. Signed-off-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
-
Darrick J. Wong authored
Apparently cris doesn't require structure stride to align with the largest type in the struct, so list[0] isn't at offset 4 like it is everywhere else. Fix this... insofar as existing XFSes on cris are screwed. Signed-off-by:
-
Darrick J. Wong authored
When we're iterating inode xattrs by handle, we have to copy the cursor back to userspace so that a subsequent invocation actually retrieves subsequent contents. Signed-off-by:
-
- 22 Jul, 2016 2 commits
-
-
Dave Chinner authored
-
Dave Chinner authored
Been around for long enough now, hasn't caused any regression test failures in the past 3 months, so it's time to make it a fully supported feature. Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Signed-off-by:
-
- 21 Jul, 2016 5 commits
-
-
Dave Chinner authored
In xfs_finish_page_writeback(), we have a loop that looks like this: do { if (off < bvec->bv_offset) goto next_bh; if (off > end) break; bh->b_end_io(bh, !error); next_bh: off += bh->b_size; } while ((bh = bh->b_this_page) != head); The b_end_io function is end_buffer_async_write(), which will call end_page_writeback() once all the buffers have marked as no longer under IO. This issue here is that the only thing currently protecting both the bufferhead chain and the page from being reclaimed is the PageWriteback state held on the page. While we attempt to limit the loop to just the buffers covered by the IO, we still read from the buffer size and follow the next pointer in the bufferhead chain. There is no guarantee that either of these are valid after the PageWriteback flag has been cleared. Hence, loops like this are completely unsafe, and result in use-after-free issues. One such problem was caught by Calvin Owens with KASAN: ..... INFO: Freed in 0x103fc80ec age=18446651500051355200 cpu=2165122683 pid=-1 free_buffer_head+0x41/0x90 __slab_free+0x1ed/0x340 kmem_cache_free+0x270/0x300 free_buffer_head+0x41/0x90 try_to_free_buffers+0x171/0x240 xfs_vm_releasepage+0xcb/0x3b0 try_to_release_page+0x106/0x190 shrink_page_list+0x118e/0x1a10 shrink_inactive_list+0x42c/0xdf0 shrink_zone_memcg+0xa09/0xfa0 shrink_zone+0x2c3/0xbc0 ..... Call Trace: <IRQ> [<ffffffff81e8b8e4>] dump_stack+0x68/0x94 [<ffffffff8153a995>] print_trailer+0x115/0x1a0 [<ffffffff81541174>] object_err+0x34/0x40 [<ffffffff815436e7>] kasan_report_error+0x217/0x530 [<ffffffff81543b33>] __asan_report_load8_noabort+0x43/0x50 [<ffffffff819d651f>] xfs_destroy_ioend+0x3bf/0x4c0 [<ffffffff819d69d4>] xfs_end_bio+0x154/0x220 [<ffffffff81de0c58>] bio_endio+0x158/0x1b0 [<ffffffff81dff61b>] blk_update_request+0x18b/0xb80 [<ffffffff821baf57>] scsi_end_request+0x97/0x5a0 [<ffffffff821c5558>] scsi_io_completion+0x438/0x1690 [<ffffffff821a8d95>] scsi_finish_command+0x375/0x4e0 [<ffffffff821c3940>] scsi_softirq_done+0x280/0x340 Where the access is occuring during IO completion after the buffer had been freed from direct memory reclaim. Prevent use-after-free accidents in this end_io processing loop by pre-calculating the loop conditionals before calling bh->b_end_io(). The loop is already limited to just the bufferheads covered by the IO in progress, so the offset checks are sufficient to prevent accessing buffers in the chain after end_page_writeback() has been called by the the bh->b_end_io() callout. Yet another example of why Bufferheads Must Die. cc: <stable@vger.kernel.org> # 4.7 Signed-off-by:Calvin Owens <calvinowens@fb.com> Reviewed-by:
-
Dave Chinner authored
One of the problems we currently have with delayed logging is that under serious memory pressure we can deadlock memory reclaim. THis occurs when memory reclaim (such as run by kswapd) is reclaiming XFS inodes and issues a log force to unpin inodes that are dirty in the CIL. The CIL is pushed, but this will only occur once it gets the CIL context lock to ensure that all committing transactions are complete and no new transactions start being committed to the CIL while the push switches to a new context. The deadlock occurs when the CIL context lock is held by a committing process that is doing memory allocation for log vector buffers, and that allocation is then blocked on memory reclaim making progress. Memory reclaim, however, is blocked waiting for a log force to make progress, and so we effectively deadlock at this point. To solve this problem, we have to move the CIL log vector buffer allocation outside of the context lock so that memory reclaim can always make progress when it needs to force the log. The problem with doing this is that a CIL push can take place while we are determining if we need to allocate a new log vector buffer for an item and hence the current log vector may go away without warning. That means we canot rely on the existing log vector being present when we finally grab the context lock and so we must have a replacement buffer ready to go at all times. To ensure this, introduce a "shadow log vector" buffer that is always guaranteed to be present when we gain the CIL context lock and format the item. This shadow buffer may or may not be used during the formatting, but if the log item does not have an existing log vector buffer or that buffer is too small for the new modifications, we swap it for the new shadow buffer and format the modifications into that new log vector buffer. The result of this is that for any object we modify more than once in a given CIL checkpoint, we double the memory required to track dirty regions in the log. For single modifications then we consume the shadow log vectorwe allocate on commit, and that gets consumed by the checkpoint. However, if we make multiple modifications, then the second transaction commit will allocate a shadow log vector and hence we will end up with double the memory usage as only one of the log vectors is consumed by the CIL checkpoint. The remaining shadow vector will be freed when th elog item is freed. This can probably be optimised in future - access to the shadow log vector is serialised by the object lock (as opposited to the active log vector, which is controlled by the CIL context lock) and so we can probably free shadow log vector from some objects when the log item is marked clean on removal from the AIL. Signed-off-by:
-
Dave Chinner authored
xfsprogs source commit 4280e59dcbc4cd8e01585efe788a68eb378048e8 xfs_da3_split() has to handle all three versions of the directory/attribute btree structure. The attr tree is v1, the dir tre is v2 or v3. The main difference between the v1 and v2/3 trees is the way tree nodes are split - in the v1 tree we can require a double split to occur because the object to be inserted may be larger than the space made by splitting a leaf. In this case we need to do a double split - one to split the full leaf, then another to allocate an empty leaf block in the correct location for the new entry. This does not happen with dir (v2/v3) formats as the objects being inserted are always guaranteed to fit into the new space in the split blocks. Indeed, for directories they *may* be an extra block on this buffer pointer. However, it's guaranteed not to be a leaf block (i.e. a directory data block) - the directory code only ever places hash index or free space blocks in this pointer (as a cursor of sorts), and so to use it as a directory data block will immediately corrupt the directory. The problem is that the code assumes that there may be extra blocks that we need to link into the tree once we've split the root, but this is not true for either dir or attr trees, because the extra attr block is always consumed by the last node split before we split the root. Hence the linking in an extra block is always wrong at the root split level, and this manifests itself in repair as a directory corruption in a repaired directory, leaving the directory rebuild incomplete. This is a dir v2 zero-day bug - it was in the initial dir v2 commit that was made back in February 1998. Fix this by ensuring the linking of the blocks after the root split never tries to make use of the extra blocks that may be held in the cursor. They are held there for other purposes and should never be touched by the root splitting code. Signed-off-by:
-
Arnd Bergmann authored
We check IS_DAX(inode) before calling either xfs_file_dax_read or xfs_file_dax_write, and this will lead the call being optimized out at compile time when CONFIG_FS_DAX is disabled. However, the two functions are marked STATIC, so they become global symbols when CONFIG_XFS_DEBUG is set, leaving us with two unused global functions that call into an undefined function and a broken "allmodconfig" build: fs/built-in.o: In function `xfs_file_dax_read': fs/xfs/xfs_file.c:348: undefined reference to `dax_do_io' fs/built-in.o: In function `xfs_file_dax_write': fs/xfs/xfs_file.c:758: undefined reference to `dax_do_io' Marking the two functions 'static noinline' instead of 'STATIC' will let the compiler drop the symbols when there are no callers but avoid the implicit inlining. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: 16d4d435 ("xfs: split direct I/O and DAX path") Reviewed-by:
-
Brian Foster authored
XFS has had scattered reports of delalloc blocks present at ->releasepage() time. This results in a warning with a stack trace similar to the following: ... Call Trace: [<ffffffffa23c5b8f>] dump_stack+0x63/0x84 [<ffffffffa20837a7>] warn_slowpath_common+0x97/0xe0 [<ffffffffa208380a>] warn_slowpath_null+0x1a/0x20 [<ffffffffa2326caf>] xfs_vm_releasepage+0x10f/0x140 [<ffffffffa218c680>] ? page_mkclean_one+0xd0/0xd0 [<ffffffffa218d3a0>] ? anon_vma_prepare+0x150/0x150 [<ffffffffa21521c2>] try_to_release_page+0x32/0x50 [<ffffffffa2166b2e>] shrink_active_list+0x3ce/0x3e0 [<ffffffffa21671c7>] shrink_lruvec+0x687/0x7d0 [<ffffffffa21673ec>] shrink_zone+0xdc/0x2c0 [<ffffffffa2168539>] kswapd+0x4f9/0x970 [<ffffffffa2168040>] ? mem_cgroup_shrink_node_zone+0x1a0/0x1a0 [<ffffffffa20a0d99>] kthread+0xc9/0xe0 [<ffffffffa20a0cd0>] ? kthread_stop+0x100/0x100 [<ffffffffa26b404f>] ret_from_fork+0x3f/0x70 [<ffffffffa20a0cd0>] ? kthread_stop+0x100/0x100 This occurs because it is possible for shrink_active_list() to send pages marked dirty to ->releasepage() when certain buffer_head threshold conditions are met. shrink_active_list() doesn't check the page dirty state apparently to handle an old ext3 corner case where in some cases clean pages would not have the dirty bit cleared, thus it is up to the filesystem to determine how to handle the page. XFS currently handles the delalloc case properly, but this behavior makes the warning spurious. Update the XFS ->releasepage() handler to explicitly skip dirty pages. Retain the existing delalloc/unwritten checks so we continue to warn if such buffers exist on clean pages when they shouldn't. Diagnosed-by:
-
- 20 Jul, 2016 23 commits
-
-
Dave Chinner authored
-
Dave Chinner authored
-
Dave Chinner authored
-
Dave Chinner authored
-
Christoph Hellwig authored
Instead we always declare struct xfs_dir2_sf_hdr as packed. That's the expected layout, and while most major architectures do the packing by default the new structure size and offset checker showed that not only the ARM old ABI got this wrong, but various minor embedded architectures did as well. [Verified that no code change on x86-64 results from this change] Signed-off-by:
-
Christoph Hellwig authored
And use an array of unsigned char values directly to avoid problems with architectures that pad the size of structures. This also gets rid of the xfs_dir2_ino4_t and xfs_dir2_ino8_t types, and introduces new constants for the size of 4 and 8 bytes as well as the size difference between the two. Signed-off-by:
-
Christoph Hellwig authored
Just use an array of two unsigned chars directly to avoid problems with architectures that pad the size of structures. Signed-off-by:
-
Christoph Hellwig authored
So far the DAX code overloaded the direct I/O code path. There is very little in common between the two, and untangling them allows to clean up both variants. As a side effect we also get separate trace points for both I/O types. Signed-off-by:
-
Christoph Hellwig authored
We control both the callers and callees of ->direct_IO, so remove the indirect calls. Signed-off-by:
-
Christoph Hellwig authored
XFS already implement it's own flushing of the pagecache because it implements proper synchronization for direct I/O reads. This means calling generic_file_read_iter for direct I/O is rather useless, as it doesn't do much but updating the atime and iocb position for us. This also gets rid of the buffered I/O fallback that isn't used for XFS. Signed-off-by:
-
Christoph Hellwig authored
Similar to what we did on the write side a while ago. Signed-off-by:
-
Christoph Hellwig authored
All the three low-level read implementations that we might call already take care of not overflowing the maximum supported bytes, no need to duplicate it here. Signed-off-by:
-
Christoph Hellwig authored
Now that we have the direct I/O kiocb flag there is no real need to sample the value inside of XFS, and the invis flag was always just partially used and isn't worth keeping this infrastructure around for. This also splits the read tracepoint into buffered vs direct as we've done for writes a long time ago. Signed-off-by:
-
Christoph Hellwig authored
Instead check the file pointer for the invisble I/O flag directly, and use the chance to drop redundant arguments from the xfs_ioc_space prototype. Signed-off-by:
-
Brian Foster authored
Newly allocated XFS metadata buffers are added to the LRU once the hold count is released, which typically occurs after I/O completion. There is no other mechanism at current that tracks the existence or I/O state of a new buffer. Further, readahead I/O tends to be submitted asynchronously by nature, which means the I/O can remain in flight and actually complete long after the calling context is gone. This means that file descriptors or any other holds on the filesystem can be released, allowing the filesystem to be unmounted while I/O is still in flight. When I/O completion occurs, core data structures may have been freed, causing completion to run into invalid memory accesses and likely to panic. This problem is reproduced on XFS via directory readahead. A filesystem is mounted, a directory is opened/closed and the filesystem immediately unmounted. The open/close cycle triggers a directory readahead that if delayed long enough, runs buffer I/O completion after the unmount has completed. To address this problem, add a mechanism to track all in-flight, asynchronous buffers using per-cpu counters in the buftarg. The buffer is accounted on the first I/O submission after the current reference is acquired and unaccounted once the buffer is returned to the LRU or freed. Update xfs_wait_buftarg() to wait on all in-flight I/O before walking the LRU list. Once in-flight I/O has completed and the workqueue has drained, all new buffers should have been released onto the LRU. Signed-off-by:
-
Brian Foster authored
The upcoming buftarg I/O accounting mechanism maintains a count of all buffers that have undergone I/O in the current hold-release cycle. Certain buffers associated with core infrastructure (e.g., the xfs_mount superblock buffer, log buffers) are never released, however. This means that accounting I/O submission on such buffers elevates the buftarg count indefinitely and could lead to lockup on unmount. Define a new buffer flag to explicitly exclude buffers from buftarg I/O accounting. Set the flag on the superblock and associated log buffers. Signed-off-by:
-
Eric Sandeen authored
With the code as it stands today, b_retries never increments because it gets reset to 0 in the error callback. Remove that, and fix a similar problem where the first retry time was constantly being overwritten, which defeated the timeout tunable as well. We now only set first retry time if a non-zero timeout is set, to match the behavior of only incrementing retries if a retry value is set. This way max retries & timeouts consistently take effect after a tunable is set, rather than acting retroactively on a buffer which has failed at some point in the past and has accumulated state from those prior failures. Thanks to dchinner for talking through this with me. Signed-off-by:
Carlos Maiolino <cmaiolino@redhat.com> Signed-off-by:
-
Eric Sandeen authored
Fix up a couple places where extra flag manipulation occurs. In the first case we clear XBF_ASYNC and then immediately reset it - so don't bother clearing in the first place. In the 2nd case we are at a point in the function where the buffer must already be async, so there is no need to reset it. Add consistent spacing around the " | " while we're at it. Signed-off-by:
-
Eric Sandeen authored
xfs_error_get_cfg() is called with bp->b_error as an arg, which is negative, so the switch statement won't ever find any matches. This results in only the default error handler having any effect, as EIO/ENOSPC/ENODEV get ignored due to the wrong sign. It seems simplest to always flip the error sign to positive, so that we can handle either negative errors in bp->b_error, or possibly a positive errno via something like xfs_error_get_cfg(EIO) - this future-proofs the function. Signed-off-by:
-
Hou Tao authored
replace the magic numbers by offsetof(...) and sizeof(...), and add two extra checks on xfs_check_ondisk_structs() [dchinner: renamed header structures to be more descriptive] Signed-off-by:
Hou Tao <houtao1@huawei.com> Reviewed-by:
-
Kaho Ng authored
The indentation in this function is different from the other functions. Those spacebars are converted to tabs to improve readability. Signed-off-by:
Kaho Ng <ngkaho1234@gmail.com> Reviewed-by:
-
Dan Carpenter authored
Errors go from zero which means no error to XFS_ERRTAG_MAX (22). My static checker complains that xfs_errortag_add() puts an upper bound on this but not a lower bound. Let's fix it by making it unsigned. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
-
Jann Horn authored
When calling fdget() in xfs_ioc_swapext(), we need to verify that the file descriptors passed into the ioctl point to XFS inodes before we start operations on them. If we don't do this, we could be referencing arbitrary kernel memory as an XFS inode. THis could lead to memory corruption and/or performing locking operations on attacker-chosen structures in kernel memory. [dchinner: rewrite commit message ] [dchinner: add comment explaining new check ] Signed-off-by:
Jann Horn <jann@thejh.net> Reviewed-by:
-
- 21 Jun, 2016 4 commits
-
-
Dave Chinner authored
-
Darrick J. Wong authored
Create a common function to calculate the maximum height of a per-AG btree. This will eventually be used by the rmapbt and refcountbt code to calculate appropriate maxlevels values for each. This is important because the verifiers and the transaction block reservations depend on accurate estimates of how many blocks are needed to satisfy a btree split. We were mistakenly using the max bnobt height for all the btrees, which creates a dangerous situation since the larger records and keys in an rmapbt make it very possible that the rmapbt will be taller than the bnobt and so we can run out of transaction block reservation. Signed-off-by:
-
Darrick J. Wong authored
In struct xfs_bmap_free, convert the open-coded free extent list to a regular list, then use list_sort to sort it prior to processing. Signed-off-by:
-
Dave Chinner authored
Break up xfs_free_extent() into a helper that fixes the freelist. This helper will be used subsequently to ensure the freelist during deferred rmap processing. [darrick: refactor to put this at the head of the patchset] Signed-off-by:
-
