- 03 Sep, 2015 40 commits
-
-
Janne Huttunen authored
Some Octeon II models have SSO instead of POW and use a different register for setting the interrupt thresholds. Add the necessary definitions for configuring the interrupts also on those models. Signed-off-by:
Janne Huttunen <janne.huttunen@nokia.com> Signed-off-by:
Aaro Koskinen <aaro.koskinen@nokia.com> Acked-by:
David Daney <david.daney@cavium.com> Cc: David Daney <ddaney.cavm@gmail.com> Cc: linux-mips@linux-mips.org Cc: Janne Huttunen <janne.huttunen@nokia.com> Cc: Aaro Koskinen <aaro.koskinen@nokia.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: devel@driverdev.osuosl.org Patchwork: https://patchwork.linux-mips.org/patch/10972/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Janne Huttunen authored
CN68XX has common minimum packet size filters that need to be configured for the traffic to work. Just set them to a default value. Signed-off-by:
-
Janne Huttunen authored
Configure the pkinds of XAUI interfaces on Octeon models that have them. This simple configuration uses 1:1 mapping between the PIP input port number and the selected pkind. Signed-off-by:
-
Janne Huttunen authored
CN68XX has 48 PIP input ports. Signed-off-by:
-
Janne Huttunen authored
CN68XX has 9 interfaces. Signed-off-by:
-
Janne Huttunen authored
Some CN68XX series Octeon II chips seem to hang if a reset is issued on XAUI initialization. Avoid the hang by disabling the reset on affected models. Tested on Cavium EBB6800 evaluation board and Kontron S1901 board. Signed-off-by:
-
Ezequiel Garcia authored
This commit introduces a new config, so the user can choose to enable the General Purpose Timer based clocksource. This option is required to have CPUFreq support. Signed-off-by:
Ezequiel Garcia <ezequiel.garcia@imgtec.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: devicetree@vger.kernel.org Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: James Hartley <James.Hartley@imgtec.com> Cc: Govindraj Raja <Govindraj.Raja@imgtec.com> Cc: Damien Horsley <Damien.Horsley@imgtec.com> Cc: James Hogan <James.Hogan@imgtec.com> Cc: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Cc: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Patchwork: http://patchwork.linux-mips.org/patch/10887/Signed-off-by:
-
Ezequiel Garcia authored
The Pistachio SoC provides four general purpose timers, and allow to implement a clocksource driver. This driver can be used as a replacement for the MIPS GIC and MIPS R4K clocksources and sched clocks, which are clocked from the CPU clock. Given the general purpose timers are clocked from an independent clock, this new clocksource driver will be useful to introduce CPUFreq support for Pistachio machines. Signed-off-by:
Govindraj Raja <govindraj.raja@imgtec.com> Reviewed-by:
Thomas Gleixner <tglx@linutronix.de> Acked-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: Andrew Bresticker <abrestic@chromium.org> Cc: James Hartley <James.Hartley@imgtec.com> Cc: Damien Horsley <Damien.Horsley@imgtec.com> Cc: James Hogan <James.Hogan@imgtec.com> Cc: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Cc: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/10899/Signed-off-by:
-
Ezequiel Garcia authored
Add a device-tree binding document for the clocksource driver provided by Pistachio SoC general purpose timers. Signed-off-by:
Andrew Bresticker <abrestic@chromium.org> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: devicetree@vger.kernel.org Cc: Thomas Gleixner <tglx@linutronix.de> Cc: James Hartley <James.Hartley@imgtec.com> Cc: Govindraj Raja <Govindraj.Raja@imgtec.com> Cc: Damien Horsley <Damien.Horsley@imgtec.com> Cc: James Hogan <James.Hogan@imgtec.com> Cc: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Patchwork: https://patchwork.linux-mips.org/patch/10783/Signed-off-by:
-
Ezequiel Garcia authored
This commit introduces the clockevent frequency update, using a clock notifier. It will be used to support CPUFreq on platforms using MIPS GIC based clockevents. Signed-off-by:
-
Guenter Roeck authored
Now that we're ready to enable COMMON_CLK for GIC platforms do so for Malta and SEAD3. The only other user of the GIC Pistachio does already do so. [ralf@linux-mips.org: Rewrite the commit message because applied in the right order there is no breakage thus no fix required.] Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Cc: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11038/Signed-off-by:
-
Ezequiel Garcia authored
This is preparation work for the introduction of clockevent frequency update with a clock notifier. This is only possible when the device is passed a clk struct, so let's split the legacy and devicetree initialization. Reviewed-by:
-
Ezequiel Garcia authored
This commit adds the required checks on the functions that return an error. Some of them are not critical, so only a warning is printed. Signed-off-by:
-
Ezequiel Garcia authored
For the clock to be used (e.g. get its rate through clk_get_rate) it should be prepared and enabled first. Also, while the clock is enabled the driver must hold a reference to it, so let's remove the call to clk_put. Reviewed-by:
-
Paul Burton authored
Rather than saving the scalar FP or vector context in the assembly resume function, reuse the existing C code we have in fpu.h to do exactly that. This reduces duplication, results in a much easier to read resume function & should allow the compiler to optimise out more MSA code due to is_msa_enabled()/cpu_has_msa being known-zero at compile time for kernels without MSA support. Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-kernel@vger.kernel.org Cc: James Hogan <james.hogan@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Manuel Lauss <manuel.lauss@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/10830/Signed-off-by:
-
Antonio Ospite authored
Fix the 0x0x prefix in integer constants, in this case the registers interval is actually 0x8065 .. 0x80A4 as confirmed some lines above in the code. Signed-off-by:
Antonio Ospite <ao2@ao2.it> Cc: linux-mips@linux-mips.org Cc: Jiri Kosina <trivial@kernel.org> Patchwork: https://patchwork.linux-mips.org/patch/9908/Signed-off-by:
-
Ralf Baechle authored
Signed-off-by: -
Ralf Baechle authored
Signed-off-by: -
Ralf Baechle authored
This reverts commit 7281cd22 and adds actual functionality to use the field.
-
Subhendu Sekhar Behera authored
Add NAND IRQ mapping for XLP9xx processor. Signed-off-by:
Subhendu Sekhar Behera <sbehera@broadcom.com> Signed-off-by:
Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10820/Signed-off-by:
-
Kamlakant Patel authored
This is needed to enable GPIO framework support for Netlogic XLP platform. Signed-off-by:
Kamlakant Patel <kamlakant.patel@broadcom.com> Signed-off-by:
-
Kamlakant Patel authored
Add GPIO entries to the Netlogic XLP device tree files. Signed-off-by:
-
Kamlakant Patel authored
Update mips/netlogic/common/irq.c and mips/pci/msi-xlp.c to use chip_data to store interrupt controller data pointer. It uses handler_data now, and that causes errors when an API (like the GPIO subsystem) tries to use the handler data. Signed-off-by:
-
Alban Bedel authored
Currently CONFIG_ARCH_HAVE_CUSTOM_GPIO_H is defined for all MIPS machines, and each machine type provides its own gpio.h. However only a handful really implement the GPIO API, most just forward everythings to gpiolib. The Alchemy machine is notable as it provides a system to allow implementing the GPIO API at the board level. But it is not used by any board currently supported, so it can also be removed. For most machine types we can just remove the custom gpio.h, as well as the custom wrappers if some exists. Some of the code found in the wrappers must be moved to the respective GPIO driver. A few more fixes are need in some drivers as they rely on linux/gpio.h to provides some machine specific definitions, or used asm/gpio.h instead of linux/gpio.h for the gpio API. Signed-off-by:
Alban Bedel <albeu@free.fr> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Cc: linux-mips@linux-mips.org Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Tejun Heo <tj@kernel.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Florian Fainelli <florian@openwrt.org> Cc: Manuel Lauss <manuel.lauss@gmail.com> Cc: Joe Perches <joe@perches.com> Cc: Daniel Walter <dwalter@google.com> Cc: Sergey Ryazanov <ryazanov.s.a@gmail.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: James Hartley <james.hartley@imgtec.com> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Wolfram Sang <wsa@the-dreams.de> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Varka Bhadram <varkabhadram@gmail.com> Cc: Masanari Iida <standby24x7@gmail.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Michael Buesch <m@bues.ch> Cc: abdoulaye berthe <berthe.ab@gmail.com> Cc: linux-kernel@vger.kernel.org Cc: linux-ide@vger.kernel.org Cc: linux-gpio@vger.kernel.org Cc: linux-input@vger.kernel.org Cc: netdev@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10828/Signed-off-by:
-
Alban Bedel authored
GPIO drivers should be in drivers/gpio Signed-off-by:
-
Alban Bedel authored
To prepare moving the GPIO driver to drivers/gpio remove the platform specific pinmux API. As it is not used by any board, and such functionality should better be implemented using the pinmux subsystem just removing it seems to be the best option. Signed-off-by:
-
Paul Burton authored
On MIPS64 we have spinlocks that are 32b in size and an efficient cmpxchg64 implementation, so we qualify to make use of cmpxchg backed lockrefs. Select the ARCH_USE_CMPXCHG_LOCKREF Kconfig symbol and provide a trivial implementation of arch_spin_value_unlocked to satisfy the lockref code. Using Linus' simple testcase from http://article.gmane.org/gmane.linux.file-systems/77466 on a dual core system with an in-development MIPS64 CPU running on FPGA I see around an 8% gain: Pre-patch: Total loops: 252698 Total loops: 251482 Total loops: 250806 Total loops: 252885 Total loops: 251666 Post-patch: Total loops: 273728 Total loops: 269932 Total loops: 269341 Total loops: 275004 Total loops: 270208 [ralf@linux-mips.org: Fixed conflict.] Signed-off-by:
-
Ralf Baechle authored
MIPS was using finish_arch_switch() as a hook to restore and initialize CPU context for all threads, even newly created kernel and user threads. This is however entirely solvable within switch_to() so get rid of finish_arch_switch() which is in the way of scheduler cleanups. Signed-off-by: -
Alex Smith authored
The Ingenic-specific write combining cache attribute was defined based on CONFIG_MACH_JZ4740 and therefore not used on JZ4780. Change this to CONFIG_MACH_INGENIC so that it gets used on all Ingenic platforms. Signed-off-by:
Alex Smith <alex.smith@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10769/Signed-off-by:
-
Alex Smith authored
The generic implementation of dma_map_ops.mmap(), dma_common_mmap(), is not correct for non-coherent devices. It expects to be passed a virtual address previously returned by dma_alloc_coherent(), which for a non-coherent device will return a KSEG1 address. It then attempts to convert that virtual address to a physical address using virt_to_page() which will yield an incorrect address. Also, dma_common_mmap() does not handle the DMA_ATTR_WRITE_COMBINE attribute, and therefore dma_mmap_writecombine() will not actually set the appropriate pgprot_t flags for write combining. This patch adds an implementation of dma_map_ops.mmap() that correctly handles KSEG1 addresses, and enables write combining when requested. Signed-off-by:
-
Alex Smith authored
If pgprot_writecombine is not #defined, asm-generic/pgtable.h will try to provide a default implementation by #defining it to pgprot_noncached. However our implementation is an inline function rather than a #define, so it was never actually used because of the #define in generic code. Add "#define pgprot_writecombine pgprot_writecombine" to prevent generic code from re-defining it. Signed-off-by:
-
Paul Burton authored
CONFIG_MIPS_O32_FP64_SUPPORT and CONFIG_CPU_HAS_MSA are in pretty good shape these days, and in much wider use than they once were. Stop referring to them as EXPERIMENTAL. Signed-off-by:
-
Paul Burton authored
If MSA is supported by both the hardware & the kernel then advertise that support to userland via the AT_HWCAP aux vector. Signed-off-by:
-
Paul Burton authored
When running on a CPU implementing the release 6 of the MIPS32 or MIPS64 ISA, advertise that to userland via the appropriate HWCAP bit. Signed-off-by:
-
Paul Burton authored
In order for userland to determine whether various features are safe to use, it will need to know both that the hardware supports those features and that the kernel is recent enough & configured appropriately to support them. For example under the O32 modeless FP proposal the dynamic linker & ifunc resolvers will need this information. The kernel is the only thing in a position to know availability accurately, so the kernel needs to provide the information to userland. This patch introduces the infrastructure to provide the AT_HWCAP aux vector to userland in order to provide that information. It also defines the 2 currently specified flags, which indicate MIPSr6 & MSA support. Signed-off-by:
-
Paul Burton authored
It is desirable for signal handlers to be allowed to make use of MSA, particularly if auto vectorisation is used when compiling a program. The MSA context must therefore be saved & restored before & after invoking the signal handler. Make use of the extended context structs defined in the preceding patch to save MSA context after the sigframe when appropriate. [ralf@linux-mips.org: Fixed conflicts.] Signed-off-by:
-
Paul Burton authored
The context introduced by MSA needs to be saved around signals. However, we can't increase the size of struct sigcontext because that will change the offset of the signal mask in struct sigframe or struct ucontext. This patch instead places the new context immediately after the struct sigframe for traditional signals, or similarly after struct ucontext for RT signals. The layout of struct sigframe & struct ucontext is identical from their sigcontext fields onwards, so the offset from the sigcontext to the extended context will always be the same regardless of the type of signal. Userland will be able to search through the extended context by using the magic values to detect which types of context are present. Any unrecognised context can be skipped over using the size field of struct extcontext. Once the magic value END_EXTCONTEXT_MAGIC is seen it is known that there are no further extended context structures to examine. This approach is somewhat similar to that taken by ARM to save VFP & other context at the end of struct ucontext. Userland can determine whether extended context is present by checking for the USED_EXTCONTEXT bit in the sc_used_math field of struct sigcontext. Whilst this could potentially change the historic semantics of sc_used_math if further extended context which does not imply FP context were to be introduced in the future, I have been unable to find any userland code making use of sc_used_math at all. Using one of the fields described as unused in struct sigcontext was considered, but the kernel does not already write to those fields so there would be no guarantee of the field being clear on older kernels. Other alternatives would be to have userland check the kernel version, or to have a HWCAP bit indicating presence of extended context. However there is a desire to have the context & information required to decode it be self contained such that, for example, debuggers could decode the saved context easily. [ralf@linux-mips.org: Fixed conflict.] Signed-off-by:
-
Paul Burton authored
The sc_used_math field of struct sigcontext & its variants has traditionally been used as a boolean value indicating only whether or not floating point context is saved within the sigcontext. With various supported FP modes & the ability to switch between them this information will no longer be enough to decode the meaning of the data stored in the sc_fpregs fields of struct sigcontext. To make that possible 3 bits are defined within sc_used_math: - Bit 0 (USED_FP) represents whether FP was used, essentially providing the boolean flag which sc_used_math as a whole provided previously. - Bit 1 (USED_FR1) provides the value of the Status.FR bit at the time the FP context was saved. - Bit 2 (USED_HYBRID_FPRS) indicates whether the FP context was saved under the hybrid FPR scheme. Essentially, when set the odd singles are located in bits 63:32 of the preceding even indexed sc_fpregs element. Any userland that tests whether the sc_used_math field is zero or non-zero will continue to function as expected. Having said that, I could not find any userland which uses the sc_used_math field at all. [ralf@linux-mips.org: Fixed rejects.] Signed-off-by: -
Paul Burton authored
These functions are never called & thus dead code. Remove them. Signed-off-by:
-
Paul Burton authored
Make use of the common FP sigcontext code for O32 binaries running on MIPS64 kernels now that it is taking appropriate offsets into struct sigcontext(32) from struct mips_abi. [ralf@linux-mips.org: Fixed reject.] Signed-off-by:
-
