- 07 Jan, 2016 24 commits
-
-
Andrew Lunn authored
Make device_free and device_remove operations in the mdio device structure, so the core code does not need to differentiate between phy devices and generic mdio devices. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Andrew Lunn authored
Not all devices on an MDIO bus are PHYs. Meaning not all MDIO drivers are PHY drivers. Add support for generic MDIO drivers. Signed-off-by:
-
Andrew Lunn authored
Make it clear that mdiobus_scan () will only find devices which have a vendor/product ID in registers 2 and 3. These are typically PHY devices. Other sort of MDIO devices, such as switches, are not expected to be found during the scan. Similarly, __mdiobus_register(), which calls mdiobus_scan() will only find PHY devices, and other sorts of MDIO devices are expected to be instantiated from device tree. Signed-off-by:
-
Andrew Lunn authored
This function should work with any sort of MDIO device which can be probed on the bus, not just PHY devices. So generalise it. Signed-off-by:
-
Andrew Lunn authored
Matching a driver to a device has both generic parts, and parts which are specific to PHY devices. Move the PHY specific parts into phy_device. Signed-off-by:
-
Andrew Lunn authored
Rather than have each driver set the driver owner field, do it once in the core code. This will also help with later changes, when the device structure will move. Signed-off-by:
-
Andrew Lunn authored
The MDIO PM operations are really PHY device PM operations. So move them into phy_device. This will be needed when we support devices on the mdio bus which are not PHYs. Signed-off-by:
-
Andrew Lunn authored
When the phy is connected, an info message is printed. If the netdev it is attached to has not been registered yet, the name 'uninitialised' in the output. By registering the netdev first, then connecting they phy, we can avoid this. Signed-off-by:
-
Andrew Lunn authored
The mdio_bus exports three attributes: - PHY ID is the unique 32-bits identifier for a MDIO device implementing standard MII registers MII_PHYSID1/2, which is not guaranteed to be the case for non-standard compliant devices (e.g: Ethernet switches) - PHY interface describes the data-path of the PHY/MDIO device, which is not strictly a PHY thing, but is required and needed for PHY devices to function, a MDIO device could be a control device exclusively - PHY has fixups describes what the PHY driver may have done, so completely PHY specific These are all phy attributes, not generic mdio attributes. So move the attributes into the phy device code. Signed-off-by:
-
Andrew Lunn authored
Rather than have drivers directly manipulate the mii_bus structure, provide and API for registering and unregistering devices on an MDIO bus, and performing lookups. Signed-off-by:
-
Andrew Lunn authored
We will soon support devices other than phys on the mdio bus. Look at a child's compatibility string to determine if it is a phy, before registering a phy device. Signed-off-by:
-
Andrew Lunn authored
Not all devices attached to an MDIO bus are phys. So add an mdio_device structure to represent the generic parts of an mdio device, and place this structure into the phy_device. Signed-off-by:
-
Andrew Lunn authored
Have mdio_alloc() create the array of interrupt numbers, and initialize it to POLLING. This is what most MDIO drivers want, so allowing code to be removed from the drivers. Signed-off-by:
-
Andrew Lunn authored
Rather than use devm_kzalloc(), use the mdio helper function. Signed-off-by:
-
Andrew Lunn authored
Many Ethernet drivers contain the same netdev_info() print statement about the attached phy. Move it into the phy device code. Additionally add a varargs function which can be used to append additional information. Signed-off-by:
-
Andrew Lunn authored
The address of the device can be determined from the phydev structure, rather than passing it as a parameter. Signed-off-by:
-
Andrew Lunn authored
Replace the open coded search for the first phy with a call to the existing helper function. Signed-off-by:
-
Andrew Lunn authored
Add a phydev_name() function, to help with moving some structure members from phy_device. Signed-off-by:
-
Andrew Lunn authored
In preparation for moving some of the phy_device structure members, add macros for printing errors and debug information. Signed-off-by:
-
Andrew Lunn authored
Since we have a phydev, make use of it and the phy_read() function. This will help with later refactoring. Signed-off-by:
-
Andrew Lunn authored
These are logically MDIO operations, not phy operations, so move them into the mdio header. Signed-off-by:
-
Andrew Lunn authored
Within phy.h, an address on an MII bus has been called both addr and phy_id. phy_id is particularly confusion, since it also means the ID found in register 3, if the device on the bus is a phy. Consistently use addr. Signed-off-by:
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: "As usual, there are a couple straggler bug fixes: 1) qlcnic_alloc_mbx_args() error returns are not checked in qlcnic driver. Fix from Insu Yun. 2) SKB refcounting bug in connector, from Florian Westphal. 3) vrf_get_saddr() has to propagate fib_lookup() errors to it's callers, from David Ahern. 4) Fix AF_UNIX splice/bind deadlock, from Rainer Weikusat. 5) qdisc_rcu_free() fails to free the per-cpu qstats. Fix from John Fastabend. 6) vmxnet3 driver passes wrong page to dma_map_page(), fix from Shrikrishna Khare. 7) Don't allow zero cwnd in tcp_cwnd_reduction(), from Yuchung Cheng" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: tcp: fix zero cwnd in tcp_cwnd_reduction Driver: Vmxnet3: Fix regression caused by 5738a09d net: qmi_wwan: Add WeTelecom-WPD600N mkiss: fix scribble on freed memory net: possible use after free in dst_release net: sched: fix missing free per cpu on qstats ARM: net: bpf: fix zero right shift 6pack: fix free memory scribbles net: filter: make JITs zero A for SKF_AD_ALU_XOR_X bridge: Only call /sbin/bridge-stp for the initial network namespace af_unix: Fix splice-bind deadlock net: Propagate lookup failure in l3mdev_get_saddr to caller r8152: add reset_resume function connector: bump skb->users before callback invocation cxgb4: correctly handling failed allocation qlcnic: correctly handle qlcnic_alloc_mbx_args
-
- 06 Jan, 2016 16 commits
-
-
Yuchung Cheng authored
Patch 3759824d ("tcp: PRR uses CRB mode by default and SS mode conditionally") introduced a bug that cwnd may become 0 when both inflight and sndcnt are 0 (cwnd = inflight + sndcnt). This may lead to a div-by-zero if the connection starts another cwnd reduction phase by setting tp->prior_cwnd to the current cwnd (0) in tcp_init_cwnd_reduction(). To prevent this we skip PRR operation when nothing is acked or sacked. Then cwnd must be positive in all cases as long as ssthresh is positive: 1) The proportional reduction mode inflight > ssthresh > 0 2) The reduction bound mode a) inflight == ssthresh > 0 b) inflight < ssthresh sndcnt > 0 since newly_acked_sacked > 0 and inflight < ssthresh Therefore in all cases inflight and sndcnt can not both be 0. We check invalid tp->prior_cwnd to avoid potential div0 bugs. In reality this bug is triggered only with a sequence of less common events. For example, the connection is terminating an ECN-triggered cwnd reduction with an inflight 0, then it receives reordered/old ACKs or DSACKs from prior transmission (which acks nothing). Or the connection is in fast recovery stage that marks everything lost, but fails to retransmit due to local issues, then receives data packets from other end which acks nothing. Fixes: 3759824d ("tcp: PRR uses CRB mode by default and SS mode conditionally") Reported-by:
Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
David S. Miller authored
A repeating pattern in drivers has become to use OF node information and, if not found, platform specific host information to extract the ethernet address for a given device. Currently this is done with a call to of_get_mac_address() and then some ifdef'd stuff for SPARC. Consolidate this into a portable routine, and provide the arch_get_platform_mac_address() weak function hook for all architectures to implement if they want. Signed-off-by: -
Shrikrishna Khare authored
Reported-by:
Bingkuo Liu <bingkuol@vmware.com> Signed-off-by:
Shrikrishna Khare <skhare@vmware.com> Signed-off-by:
-
Eric Dumazet authored
TX fast path uses ndo_start_xmit(), ndo_features_check() and ndo_select_queue(). Move ndo_features_check() close to ndo_start_xmit() to increase data locality. All "struct net_device_ops" should now be using C99 initializers. Signed-off-by:
-
Kristian Evensen authored
The WeTelecom-WPD600N is an LTE module that, in addition to supporting most "normal" bands, also supports LTE over 450MHz. Manual testing showed that only interface number three replies to QMI messages. Cc: Bjørn Mork <bjorn@mork.no> Signed-off-by:
Kristian Evensen <kristian.evensen@gmail.com> Acked-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Dan Carpenter authored
"priv" is allocated with devm_kzalloc() so freeing it here with kfree() will lead to a double free. Fixes: 39339616 ('fsl/fman: Add FMan MAC driver') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Dan Carpenter authored
pause_time is unsigned so it can't be less than zero. The bug means that we allow invalid pause-times. Fixes: 57ba4c9b ('fsl/fman: Add FMan MAC support') Signed-off-by:
-
Dan Carpenter authored
We checked "err" on the lines before so we know it's zero here. These cause a static checker warning because checking known things can indicate a bug. Maybe there is a missing assignment or we are checking the wrong variable. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Alan authored
commit d79f16c0 fixed a user triggerable scribble on free memory but added a new one which allows the user to scribble even more and user controlled data into freed space. As with 6pack we need to halt the queue before we free the buffers, because the transmit logic is not protected by the semaphore. Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Jarod Wilson authored
This is based on the work done by Przemek Rudy in bug 70761 at bugzilla.kernel.org, but with some work done to disentagle and clarify things a bit. Similar to Przemek's work and other drivers, we're adding a padding of 16 here, but we're also disentangling mtu size calculations from max buffer size calculations a bit, and adding ETH_HLEN to the value written into ALX_MTU. Hopefully, with a bit more consistency and clarity, things behave better here. Sadly, I can only test in my alx-driven E2200, which worked just fine before this patch. In comment #58 of bug 70761, Eugene A. Shatokhin reports that this patch does help considerably for a ROSA Linux user of his with an AR8162 network adapter when patched into a 4.1.x-based kernel, with several days of normal operation where wired network previously wasn't usable without setting MTU to 9000 as a work-around. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=70761 CC: "Eugene A. Shatokhin" <eugene.shatokhin@rosalab.ru> CC: Przemek Rudy <prudy1@o2.pl> CC: Jay Cliburn <jcliburn@gmail.com> CC: Chris Snook <chris.snook@gmail.com> CC: netdev@vger.kernel.org Signed-off-by:
Jarod Wilson <jarod@redhat.com> Signed-off-by:
-
Francesco Ruggeri authored
dst_release should not access dst->flags after decrementing __refcnt to 0. The dst_entry may be in dst_busy_list and dst_gc_task may dst_destroy it before dst_release gets a chance to access dst->flags. Fixes: d69bbf88 ("net: fix a race in dst_release()") Fixes: 27b75c95 ("net: avoid RCU for NOCACHE dst") Signed-off-by:
Francesco Ruggeri <fruggeri@arista.com> Acked-by:
-
David S. Miller authored
Jiri Pirko says: ==================== mlxsw: add offload support for vlan_filtering option Elad says: This patch adds SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING port attribute. When a bridge is offloaded to hardware, the hardware can learn if the bridge is .1Q bridge (VLAN-aware) or not VLAN aware bridge. In order to toggle the mode a user can use sysfs: $ echo 1 > /sys/devices/virtual/net/br0/bridge/vlan_filtering or via iproute2: $ ip link set dev br0 type bridge vlan_filtering 1 --- v1->v2: small fix in patch #1 ==================== Signed-off-by: -
Elad Raz authored
When a vlan is been configured, remeber the untagged mode of the vlan. When displaying the list of configured VLANs, show the untagged attribute. Signed-off-by:
Elad Raz <eladr@mellanox.com> Signed-off-by:
-
Elad Raz authored
When a port is bridged, the bridge must be vlan aware bridge (.1Q) or the bridging should be on top of VLAN interfaces (.1D bridge). Signed-off-by:
-
Elad Raz authored
Signed-off-by:
-
Elad Raz authored
Initialize VLANs 0..4095 (Remove init for VID 4096). Signed-off-by:
-
