- 06 Mar, 2006 3 commits
-
-
Jamie Wellnitz authored
PCI hrd_type should be obtained with pci_read_config_byte() macro Driver keys off of this field to report the proper adapter type. The pci subsystem explicitly clears the multiport bit in the copy of the field given the driver. Thus, to properly name the card, obtain it from config space. Signed-off-by:
Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
Jamie Wellnitz authored
Derive supported speeds from LMT field in the READ_CONFIG Driver was keying off internal cores. Use what the firmware reports instead. Signed-off-by:
-
James Bottomley authored
Begin introducing the concept of sas remote devices that have an rphy embedded. The first one (this) is a simple end device. All that an end device really does is have port mode page parameters contained. The next and more complex piece will be expander remote devices. Signed-off-by:
-
- 03 Mar, 2006 3 commits
-
-
James Bottomley authored
aic94xx doesn't have a use for the bay or enclosure identifiers. Also, I think it's not going to need a get_linkerrors(), so wire up all of these exported properties as conditional on the underlying function support. Signed-off-by: -
Christoph Hellwig authored
Use the kthread_ API instead of opencoding lots of hairy code for kernel thread creation and teardown. Also switch from semaphore-based thread wakeup to wake_up_process. Signed-off-by:
Christoph Hellwig <hch@lst.de> Acked-By:
Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by:
-
James Bottomley authored
I don't think these exist in silicon yet, but the aic94xx driver has a register setting for them. Signed-off-by:
-
- 01 Mar, 2006 23 commits
-
-
James Bottomley authored
This is the first half of a patch to add the generic domain validation to mptspi. It also creates a secondary "virtual" channel for raid component devices since these are now exported with no_uld_attach. What Eric and I would have really liked is to export all physical components on channel 0 and all raid components on channel 1. Unfortunately, this would result in device renumbering on platforms with mixed RAID/Physical devices which was considered unacceptable for userland stability reasons. Still to be done is to plug back the extra parameter setting and DV pieces on reset and hotplug. Signed-off-by: -
Jamie Wellnitz authored
Change version number to 8.1.2 Signed-off-by:
-
Jamie Wellnitz authored
Modify RSCN handling to unregister rpis on lost FCP_TARGETs immediately Signed-off-by:
-
Jamie Wellnitz authored
Fix panic caused by HBA resets and target side cable pulls Signed-off-by:
-
Jamie Wellnitz authored
Fixed module parameter descriptions. Signed-off-by:
-
Jamie Wellnitz authored
Code cleanup of lpfc_mbx_cmpl_config_link Signed-off-by:
-
Jamie Wellnitz authored
Allow turning on internal loop-back mode Signed-off-by:
-
Jamie Wellnitz authored
Code style changes for Discovery code Signed-off-by:
-
Jamie Wellnitz authored
Make lpfc_els_rsp_rps_acc and lpfc_els_rsp_rpl_acc static Signed-off-by:
-
Jamie Wellnitz authored
Added support for FAN Signed-off-by:
-
Jamie Wellnitz authored
Add ERROR and WARM_START modes for diagnostic purposes. Signed-off-by:
-
Jamie Wellnitz authored
Remove hba_list from struct lpfc_hba Signed-off-by:
-
Jamie Wellnitz authored
Correct use of the hostdata field in scsi_host Signed-off-by:
-
Jamie Wellnitz authored
Misc FC Discovery changes : - Added FC_BYPASSED_MODE statistic - Corrected some log message data - Fix up Discovery infrastructure to support FAN: Allow Fabric entities to flow thru DSM Fix up linkup/linkdown unregister login processing for Fabric entities Clean up Discovery code Utilize nodev_tmo for Fabric entities - Use of 3 * ratov for CT handling timeouts - Fix up DSM to make more appropriate decisions and clean up code. Signed-off-by: -
Jamie Wellnitz authored
Add module parameter to limit number of outstanding commands per lpfc HBA Signed-off-by:
-
Jamie Wellnitz authored
Fixed a double insertion of mail box object to the SLI mailbox list. Signed-off-by:
-
Jamie Wellnitz authored
Fixed system panic in lpfc_sli_brdreset during dynamic add of LP11K Signed-off-by:
-
Jamie Wellnitz authored
Explicitly initialize the skip_post argument to lpfc_sli_send_reset on a ERATT interrupt. Signed-off-by:
-
Jamie Wellnitz authored
Fixed a race condition in the PLOGI retry logic. Signed-off-by:
-
Jamie Wellnitz authored
Handling of ELS commands RRQ, RPS, RPL and LIRR correctly Signed-off-by:
-
Jamie Wellnitz authored
Remove unused SLI_IOCB_HIGH_PRIORITY Signed-off-by:
-
Jamie Wellnitz authored
Remove unreferenced cfg_fcp_bind_method from struct lpfc_hba Signed-off-by:
-
Jamie Wellnitz authored
Remove unused prototypes from lpfc_crtn.h Signed-off-by:
-
- 28 Feb, 2006 11 commits
-
-
Brian King authored
Fixes scsi to handle device_add failure in scsi_alloc_target. Without this patch, if this call were to fail, we can oops when we free the target. Signed-off-by:
Brian King <brking@us.ibm.com> Signed-off-by:
-
James Bottomley authored
In order to use the new execute_in_process_context() API, you have to provide it with the work storage, which I do in SCSI in scsi_device and scsi_target, but which also means that we can no longer queue up the target reaps, so instead I moved the target to a state model which allows target_alloc to detect if we've received a dying target and wait for it to be gone. Hopefully, this should also solve the target namespace race. Signed-off-by: -
James Bottomley authored
We have several points in the SCSI stack (primarily for our device functions) where we need to guarantee process context, but (given the place where the last reference was released) we cannot guarantee this. This API gets around the issue by executing the function directly if the caller has process context, but scheduling a workqueue to execute in process context if the caller doesn't have it. Signed-off-by: -
Mike Christie authored
When the locking was changed in the eh code ips_eh_reset was changed so that it was a wraper around __ips_eh_reset and all ips_eh_reset does is grab the host lock and then calls __ips_eh_reset. In the queuecommand, ips_queue is called with the host_lock held so if it calls ips_eh_reset we will have a problem. This patch just has ips_queue call __ips_eh_reset. Patch is only compile tested. I do not have the HW. Signed-off-by:
Mike Christie <michaelc@cs.wisc.edu> Acked-by:
Hammer, Jack <Jack_Hammer@adaptec.com> Signed-off-by:
-
Al Viro authored
Regardless what mode page was asked for, Initio INIC-14x0 and INIC-2430 always return page 6 without mode page headers. Try to recognise this as a special case in scsi_mode_sense and setting the mode sense headers accordingly. Signed-off-by:
Al Viro <viro@ftp.linux.org.uk> Signed-off-by:
-
Matthew Wilcox authored
Fix a bug where we would consume one byte too many in the message printing code. Add support for 256-byte long messages. Add support for the Modify Bidirectional Data Pointer message. Signed-off-by:
Matthew Wilcox <matthew@wil.cx> Signed-off-by:
-
Alan Stern authored
Some non-standard SCSI targets or protocols, such as USB UFI, report "no LUN present" by setting the Peripheral Device Type to 0x1f and the Peripheral Qualifier to 0 (not 3 as the standard requires) in the INQUIRY response. This patch (as650b) adds a new target flag and code to accomodate such targets. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Christoph Hellwig authored
On Tue, Jan 31, 2006 at 06:20:18PM +0100, Christoph Hellwig wrote: > switch eh_sem to a completion. due to wait_for_completion_timeout this > also nicely simplifies the code. Unfortunately it's untested, so if > someone with the hardware could give it a try that would be nice. Once > it works the same thing can be applied to aic79xx. New version that switches to the common onstack completion and just a pointer in the platform_data struct idiom. This gets rid of all the flags fiddling. Signed-off-by:
-
Christoph Hellwig authored
Use the kthread_ API instead of opencoding lots of hairy code for kernel thread creation and teardown. Signed-off-by:
Salyzyn, Mark <mark_salyzyn@adaptec.com> Signed-off-by:
-
James Bottomley authored
Signed-off-by: -
Christoph Hellwig authored
Signed-off-by:
-
