- 23 Jul, 2014 4 commits
-
-
Horia Geanta authored
dma_mapping_error checks for an incorrect DMA address: s/ctx->sh_desc_enc_dma/ctx->sh_desc_dec_dma Signed-off-by: Horia Geanta <horia.geanta@freescale.com> Acked-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Horia Geanta authored
Replace dma_set_mask with dma_set_mask_and_coherent, since both streaming and coherent DMA mappings are being used. Signed-off-by: Horia Geanta <horia.geanta@freescale.com> Acked-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Horia Geanta authored
With DMA_API_DEBUG set, following warnings are emitted (tested on CAAM accelerator): DMA-API: device driver maps memory from kernel text or rodata DMA-API: device driver maps memory from stack and the culprits are: -key in __test_aead and __test_hash -result in __test_hash MAX_KEYLEN is changed to accommodate maximum key length from existing test vectors in crypto/testmgr.h (131 bytes) and rounded. Signed-off-by: Horia Geanta <horia.geanta@freescale.com> Acked-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Tom Lendacky authored
The default cache operations for ARM64 were changed during 3.15. To use coherent operations a "dma-coherent" device tree property is required. If that property is not present in the device tree node then the non-coherent operations are assigned for the device. Add support to the ccp driver to assign the AXI DMA cache settings based on whether the "dma-coherent" property is present in the device node. If present, use settings that work with the caches. If not present, use settings that do not look at the caches. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
- 10 Jul, 2014 3 commits
-
-
Fengguang Wu authored
CC: Stephan Mueller <smueller@chronox.de> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Dan Carpenter authored
The cast to (unsigned int *) doesn't hurt anything but it is pointless. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Ruchika Gupta authored
The layer which registers with the crypto API should check for the presence of the CAAM device it is going to use. If the platform's device tree doesn't have the required CAAM node, the layer should return an error and not register the algorithms with crypto API layer. Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
- 08 Jul, 2014 10 commits
-
-
Stephan Mueller authored
The patch corrects the security strength of the HMAC-SHA1 DRBG to 128 bits. This strength defines the size of the seed required for the DRBG. Thus, the patch lowers the seeding requirement from 256 bits to 128 bits for HMAC-SHA1. Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Stephan Mueller authored
The current locking approach of the DRBG tries to keep the protected code paths very minimal. It is therefore possible that two threads query one DRBG instance at the same time. When thread A requests random numbers, a shadow copy of the DRBG state is created upon which the request for A is processed. After finishing the state for A's request is merged back into the DRBG state. If now thread B requests random numbers from the same DRBG after the request for thread A is received, but before A's shadow state is merged back, the random numbers for B will be identical to the ones for A. Please note that the time window is very small for this scenario. To prevent that there is even a theoretical chance for thread A and B having the same DRBG state, the current time stamp is provided as additional information string for each new request. The addition of the time stamp as additional information string implies that now all generate functions must be capable to process a linked list with additional information strings instead of a scalar. CC: Rafael Aquini <aquini@redhat.com> Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Stephan Mueller authored
When the DRBG is initialized, the core is looked up using the DRBG name. The name that can be used for the lookup is registered in cra_driver_name. The cra_name value contains stdrng. Thus, the lookup code must use crypto_tfm_alg_driver_name to obtain the precise DRBG name and select the correct DRBG. Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Stephan Mueller authored
The CTR DRBG requires the update function to be called twice when generating a random number. In both cases, update function must process the additional information string by using the DF function. As the DF produces the same result in both cases, we can save one invocation of the DF function when the first DF function result is reused. The result of the DF function is stored in the scratchpad storage. The patch ensures that the scratchpad is not cleared when we want to reuse the DF result. For achieving this, the CTR DRBG update function must know by whom and in which scenario it is called. This information is provided with the reseed parameter to the update function. Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Stephan Mueller authored
The initial format strings caused warnings on several architectures. The updated format strings now match the variable types. Reported-by: kbuild test robot <fengguang.wu@intel.com> Reported-by: Randy Dunlap <rdunlap@infradead.org> CC: Joe Perches <joe@perches.com> Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Stephan Mueller authored
The structure used to construct the module description line was marked problematic by the sparse code analysis tool. The module line description now does not contain any ifdefs to prevent error reports from sparse. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Stanimir Varbanov authored
Make qce crypto driver depend on ARCH_QCOM and make possible to test driver compilation. Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Stanimir Varbanov authored
Fix few sparse warnings of type: - sparse: incorrect type in argument - sparse: incorrect type in initializer Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Nitesh Narayan Lal authored
In the current setup debug file system enables us to debug the operational details for only one CAAM. This patch adds the support for debugging multiple CAAM's. Signed-off-by: Nitesh Narayan Lal <b44382@freescale.com> Signed-off-by: Vakul Garg <b16394@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Nitesh Narayan Lal authored
The driver is compatible with SEC version 4.0, which was missing from device tree resulting that the caam driver doesn't gets probed. Since SEC is backward compatible with older versions, so this patch adds those missing versions in c29x device tree. Signed-off-by: Nitesh Narayan Lal <b44382@freescale.com> Signed-off-by: Vakul Garg <b16394@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
- 04 Jul, 2014 3 commits
-
-
Herbert Xu authored
This patch removes the build-time test that ensures at least one RNG is set. Instead we will simply not build drbg if no options are set through Kconfig. This also fixes a typo in the name of the Kconfig option CRYTPO_DRBG (should be CRYPTO_DRBG). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Stephan Mueller authored
The DRBG-style linked list to manage input data that is fed into the cipher invocations is replaced with the kernel linked list implementation. The change is transparent to users of the interfaces offered by the DRBG. Therefore, no changes to the testmgr code is needed. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Stephan Mueller authored
For the CTR DRBG, the drbg_state->scratchpad temp buffer (i.e. the memory location immediately before the drbg_state->tfm variable is the buffer that the BCC function operates on. BCC operates blockwise. Making the temp buffer drbg_statelen(drbg) in size is sufficient when the DRBG state length is a multiple of the block size. For AES192 this is not the case and the length for temp is insufficient (yes, that also means for such ciphers, the final output of all BCC rounds are truncated before used to update the state of the DRBG!!). The patch enlarges the temp buffer from drbg_statelen to drbg_statelen + drbg_blocklen to have sufficient space. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
- 03 Jul, 2014 6 commits
-
-
Arnd Bergmann authored
The interrupt handler in the ux500 crypto driver has an obviously incorrect way to access the data buffer, which for a while has caused this build warning: ../ux500/cryp/cryp_core.c: In function 'cryp_interrupt_handler': ../ux500/cryp/cryp_core.c:234:5: warning: passing argument 1 of '__fswab32' makes integer from pointer without a cast [enabled by default] writel_relaxed(ctx->indata, ^ In file included from ../include/linux/swab.h:4:0, from ../include/uapi/linux/byteorder/big_endian.h:12, from ../include/linux/byteorder/big_endian.h:4, from ../arch/arm/include/uapi/asm/byteorder.h:19, from ../include/asm-generic/bitops/le.h:5, from ../arch/arm/include/asm/bitops.h:340, from ../include/linux/bitops.h:33, from ../include/linux/kernel.h:10, from ../include/linux/clk.h:16, from ../drivers/crypto/ux500/cryp/cryp_core.c:12: ../include/uapi/linux/swab.h:57:119: note: expected '__u32' but argument is of type 'const u8 *' static inline __attribute_const__ __u32 __fswab32(__u32 val) There are at least two, possibly three problems here: a) when writing into the FIFO, we copy the pointer rather than the actual data we want to give to the hardware b) the data pointer is an array of 8-bit values, while the FIFO is 32-bit wide, so both the read and write access fail to do a proper type conversion c) This seems incorrect for big-endian kernels, on which we need to byte-swap any register access, but not normally FIFO accesses, at least the DMA case doesn't do it either. This converts the bogus loop to use the same readsl/writesl pair that we use for the two other modes (DMA and polling). This is more efficient and consistent, and probably correct for endianess. The bug has existed since the driver was first merged, and was probably never detected because nobody tried to use interrupt mode. It might make sense to backport this fix to stable kernels, depending on how the crypto maintainers feel about that. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: linux-crypto@vger.kernel.org Cc: Fabio Baltieri <fabio.baltieri@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: stable@vger.kernel.org Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Luca Clementi authored
Print the driver name that is being tested. The driver name can be inferred parsing /proc/crypto but having it in the output is clearer Signed-off-by: Luca Clementi <luca.clementi@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Stanimir Varbanov authored
Here is Qualcomm crypto driver device tree binding documentation to used as a reference example. Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Stanimir Varbanov authored
Modify crypto Kconfig and Makefile in order to build the qce driver and adds qce Makefile as well. Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Stanimir Varbanov authored
The driver is separated by functional parts. The core part implements a platform driver probe and remove callbaks. The probe enables clocks, checks crypto version, initialize and request dma channels, create done tasklet and init crypto queue and finally register the algorithms into crypto core subsystem. - DMA and SG helper functions implement dmaengine and sg-list helper functions used by other parts of the crypto driver. - ablkcipher algorithms implementation of AES, DES and 3DES crypto API callbacks, the crypto register alg function, the async request handler and its dma done callback function. - SHA and HMAC transforms implementation and registration of ahash crypto type. It includes sha1, sha256, hmac(sha1) and hmac(sha256). - infrastructure to setup the crypto hw contains functions used to setup/prepare hardware registers for all algorithms supported by the crypto block. It also exports few helper functions needed by algorithms: - to check hardware status - to start crypto hardware - to translate data stream to big endian form Adds register addresses and bit/masks used by the driver as well. Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Jarod Wilson authored
Per further discussion with NIST, the requirements for FIPS state that we only need to panic the system on failed kernel module signature checks for crypto subsystem modules. This moves the fips-mode-only module signature check out of the generic module loading code, into the crypto subsystem, at points where we can catch both algorithm module loads and mode module loads. At the same time, make CONFIG_CRYPTO_FIPS dependent on CONFIG_MODULE_SIG, as this is entirely necessary for FIPS mode. v2: remove extraneous blank line, perform checks in static inline function, drop no longer necessary fips.h include. CC: "David S. Miller" <davem@davemloft.net> CC: Rusty Russell <rusty@rustcorp.com.au> CC: Stephan Mueller <stephan.mueller@atsec.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
- 26 Jun, 2014 5 commits
-
-
Tadeusz Struk authored
Firmware loader crashes when no firmware file is present. Reviewed-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Tadeusz Struk authored
After updates to checkpatch new warnings pops up this patch fixes them. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Acked-by: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Tadeusz Struk authored
Updated Firmware Info Metadata Reviewed-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Tadeusz Struk authored
Fix random config build warnings: Implicit-function-declaration ‘__raw_writel’ Cast to pointer from integer of different size [-Wint-to-pointer-cast] Reviewed-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Stephan Mueller authored
As reported by a static code analyzer, the code for the ordering of the linked list can be simplified. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
- 25 Jun, 2014 6 commits
-
-
Eric Dumazet authored
kvfree() helper is now available, use it instead of open code it. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Jussi Kivilinna authored
Patch fixes following sparse warning: CHECK arch/x86/crypto/des3_ede_glue.c arch/x86/crypto/des3_ede_glue.c:308:52: warning: restricted __be64 degrades to integer arch/x86/crypto/des3_ede_glue.c:309:52: warning: restricted __be64 degrades to integer arch/x86/crypto/des3_ede_glue.c:310:52: warning: restricted __be64 degrades to integer arch/x86/crypto/des3_ede_glue.c:326:44: warning: restricted __be64 degrades to integer Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Ruchika Gupta authored
At few places in caamhash and caamalg, after allocating a dmable buffer for sg table , the buffer was being modified. As per definition of DMA_FROM_DEVICE ,afer allocation the memory should be treated as read-only by the driver. This patch shifts the allocation of dmable buffer for sg table after it is populated by the driver, making it read-only as per the DMA API's requirement. Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Ruchika Gupta authored
CAAM IP has certain 64 bit registers . 32 bit architectures cannot force atomic-64 operations. This patch adds definition of these atomic-64 operations for little endian platforms. The definitions which existed previously were for big endian platforms. Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Ruchika Gupta authored
For platforms with virtualization enabled 1. The job ring registers can be written to only is the job ring has been started i.e STARTR bit in JRSTART register is 1 2. For DECO's under direct software control, with virtualization enabled PL, BMT, ICID and SDID values need to be provided. These are provided by selecting a Job ring in start mode whose parameters would be used for the DECO access programming. Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Ruchika Gupta authored
Some registers like SECVID, CHAVID, CHA Revision Number, CTPR were defined as 64 bit resgisters. The IP provides a DWT bit(Double word Transpose) to transpose the two words when a double word register is accessed. However setting this bit would also affect the operation of job descriptors as well as other registers which are truly double word in nature. So, for the IP to work correctly on big-endian as well as little-endian SoC's, change is required to access all 32 bit registers as 32 bit quantities. Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
- 23 Jun, 2014 1 commit
-
-
Herbert Xu authored
qat adds -I to the ccflags. Unfortunately it uses CURDIR which breaks when make is invoked with O=. This patch replaces CURDIR with $(src) which should work with/without O=. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
- 20 Jun, 2014 2 commits
-
-
Ard Biesheuvel authored
This adds 4 test vectors for GHASH (of which one for chunked mode), making a total of 5. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
chandramouli narayanan authored
This patch introduces "by8" AES CTR mode AVX optimization inspired by Intel Optimized IPSEC Cryptograhpic library. For additional information, please see: http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=22972 The functions aes_ctr_enc_128_avx_by8(), aes_ctr_enc_192_avx_by8() and aes_ctr_enc_256_avx_by8() are adapted from Intel Optimized IPSEC Cryptographic library. When both AES and AVX features are enabled in a platform, the glue code in AESNI module overrieds the existing "by4" CTR mode en/decryption with the "by8" AES CTR mode en/decryption. On a Haswell desktop, with turbo disabled and all cpus running at maximum frequency, the "by8" CTR mode optimization shows better performance results across data & key sizes as measured by tcrypt. The average performance improvement of the "by8" version over the "by4" version is as follows: For 128 bit key and data sizes >= 256 bytes, there is a 10-16% improvement. For 192 bit key and data sizes >= 256 bytes, there is a 20-22% improvement. For 256 bit key and data sizes >= 256 bytes, there is a 20-25% improvement. A typical run of tcrypt with AES CTR mode encryption of the "by4" and "by8" optimization shows the following results: tcrypt with "by4" AES CTR mode encryption optimization on a Haswell Desktop: --------------------------------------------------------------------------- testing speed of __ctr-aes-aesni encryption test 0 (128 bit key, 16 byte blocks): 1 operation in 343 cycles (16 bytes) test 1 (128 bit key, 64 byte blocks): 1 operation in 336 cycles (64 bytes) test 2 (128 bit key, 256 byte blocks): 1 operation in 491 cycles (256 bytes) test 3 (128 bit key, 1024 byte blocks): 1 operation in 1130 cycles (1024 bytes) test 4 (128 bit key, 8192 byte blocks): 1 operation in 7309 cycles (8192 bytes) test 5 (192 bit key, 16 byte blocks): 1 operation in 346 cycles (16 bytes) test 6 (192 bit key, 64 byte blocks): 1 operation in 361 cycles (64 bytes) test 7 (192 bit key, 256 byte blocks): 1 operation in 543 cycles (256 bytes) test 8 (192 bit key, 1024 byte blocks): 1 operation in 1321 cycles (1024 bytes) test 9 (192 bit key, 8192 byte blocks): 1 operation in 9649 cycles (8192 bytes) test 10 (256 bit key, 16 byte blocks): 1 operation in 369 cycles (16 bytes) test 11 (256 bit key, 64 byte blocks): 1 operation in 366 cycles (64 bytes) test 12 (256 bit key, 256 byte blocks): 1 operation in 595 cycles (256 bytes) test 13 (256 bit key, 1024 byte blocks): 1 operation in 1531 cycles (1024 bytes) test 14 (256 bit key, 8192 byte blocks): 1 operation in 10522 cycles (8192 bytes) testing speed of __ctr-aes-aesni decryption test 0 (128 bit key, 16 byte blocks): 1 operation in 336 cycles (16 bytes) test 1 (128 bit key, 64 byte blocks): 1 operation in 350 cycles (64 bytes) test 2 (128 bit key, 256 byte blocks): 1 operation in 487 cycles (256 bytes) test 3 (128 bit key, 1024 byte blocks): 1 operation in 1129 cycles (1024 bytes) test 4 (128 bit key, 8192 byte blocks): 1 operation in 7287 cycles (8192 bytes) test 5 (192 bit key, 16 byte blocks): 1 operation in 350 cycles (16 bytes) test 6 (192 bit key, 64 byte blocks): 1 operation in 359 cycles (64 bytes) test 7 (192 bit key, 256 byte blocks): 1 operation in 635 cycles (256 bytes) test 8 (192 bit key, 1024 byte blocks): 1 operation in 1324 cycles (1024 bytes) test 9 (192 bit key, 8192 byte blocks): 1 operation in 9595 cycles (8192 bytes) test 10 (256 bit key, 16 byte blocks): 1 operation in 364 cycles (16 bytes) test 11 (256 bit key, 64 byte blocks): 1 operation in 377 cycles (64 bytes) test 12 (256 bit key, 256 byte blocks): 1 operation in 604 cycles (256 bytes) test 13 (256 bit key, 1024 byte blocks): 1 operation in 1527 cycles (1024 bytes) test 14 (256 bit key, 8192 byte blocks): 1 operation in 10549 cycles (8192 bytes) tcrypt with "by8" AES CTR mode encryption optimization on a Haswell Desktop: --------------------------------------------------------------------------- testing speed of __ctr-aes-aesni encryption test 0 (128 bit key, 16 byte blocks): 1 operation in 340 cycles (16 bytes) test 1 (128 bit key, 64 byte blocks): 1 operation in 330 cycles (64 bytes) test 2 (128 bit key, 256 byte blocks): 1 operation in 450 cycles (256 bytes) test 3 (128 bit key, 1024 byte blocks): 1 operation in 1043 cycles (1024 bytes) test 4 (128 bit key, 8192 byte blocks): 1 operation in 6597 cycles (8192 bytes) test 5 (192 bit key, 16 byte blocks): 1 operation in 339 cycles (16 bytes) test 6 (192 bit key, 64 byte blocks): 1 operation in 352 cycles (64 bytes) test 7 (192 bit key, 256 byte blocks): 1 operation in 539 cycles (256 bytes) test 8 (192 bit key, 1024 byte blocks): 1 operation in 1153 cycles (1024 bytes) test 9 (192 bit key, 8192 byte blocks): 1 operation in 8458 cycles (8192 bytes) test 10 (256 bit key, 16 byte blocks): 1 operation in 353 cycles (16 bytes) test 11 (256 bit key, 64 byte blocks): 1 operation in 360 cycles (64 bytes) test 12 (256 bit key, 256 byte blocks): 1 operation in 512 cycles (256 bytes) test 13 (256 bit key, 1024 byte blocks): 1 operation in 1277 cycles (1024 bytes) test 14 (256 bit key, 8192 byte blocks): 1 operation in 8745 cycles (8192 bytes) testing speed of __ctr-aes-aesni decryption test 0 (128 bit key, 16 byte blocks): 1 operation in 348 cycles (16 bytes) test 1 (128 bit key, 64 byte blocks): 1 operation in 335 cycles (64 bytes) test 2 (128 bit key, 256 byte blocks): 1 operation in 451 cycles (256 bytes) test 3 (128 bit key, 1024 byte blocks): 1 operation in 1030 cycles (1024 bytes) test 4 (128 bit key, 8192 byte blocks): 1 operation in 6611 cycles (8192 bytes) test 5 (192 bit key, 16 byte blocks): 1 operation in 354 cycles (16 bytes) test 6 (192 bit key, 64 byte blocks): 1 operation in 346 cycles (64 bytes) test 7 (192 bit key, 256 byte blocks): 1 operation in 488 cycles (256 bytes) test 8 (192 bit key, 1024 byte blocks): 1 operation in 1154 cycles (1024 bytes) test 9 (192 bit key, 8192 byte blocks): 1 operation in 8390 cycles (8192 bytes) test 10 (256 bit key, 16 byte blocks): 1 operation in 357 cycles (16 bytes) test 11 (256 bit key, 64 byte blocks): 1 operation in 362 cycles (64 bytes) test 12 (256 bit key, 256 byte blocks): 1 operation in 515 cycles (256 bytes) test 13 (256 bit key, 1024 byte blocks): 1 operation in 1284 cycles (1024 bytes) test 14 (256 bit key, 8192 byte blocks): 1 operation in 8681 cycles (8192 bytes) crypto: Incorporate feed back to AES CTR mode optimization patch Specifically, the following: a) alignment around main loop in aes_ctrby8_avx_x86_64.S b) .rodata around data constants used in the assembely code. c) the use of CONFIG_AVX in the glue code. d) fix up white space. e) informational message for "by8" AES CTR mode optimization f) "by8" AES CTR mode optimization can be simply enabled if the platform supports both AES and AVX features. The optimization works superbly on Sandybridge as well. Testing on Haswell shows no performance change since the last. Testing on Sandybridge shows that the "by8" AES CTR mode optimization greatly improves performance. tcrypt log with "by4" AES CTR mode optimization on Sandybridge -------------------------------------------------------------- testing speed of __ctr-aes-aesni encryption test 0 (128 bit key, 16 byte blocks): 1 operation in 383 cycles (16 bytes) test 1 (128 bit key, 64 byte blocks): 1 operation in 408 cycles (64 bytes) test 2 (128 bit key, 256 byte blocks): 1 operation in 707 cycles (256 bytes) test 3 (128 bit key, 1024 byte blocks): 1 operation in 1864 cycles (1024 bytes) test 4 (128 bit key, 8192 byte blocks): 1 operation in 12813 cycles (8192 bytes) test 5 (192 bit key, 16 byte blocks): 1 operation in 395 cycles (16 bytes) test 6 (192 bit key, 64 byte blocks): 1 operation in 432 cycles (64 bytes) test 7 (192 bit key, 256 byte blocks): 1 operation in 780 cycles (256 bytes) test 8 (192 bit key, 1024 byte blocks): 1 operation in 2132 cycles (1024 bytes) test 9 (192 bit key, 8192 byte blocks): 1 operation in 15765 cycles (8192 bytes) test 10 (256 bit key, 16 byte blocks): 1 operation in 416 cycles (16 bytes) test 11 (256 bit key, 64 byte blocks): 1 operation in 438 cycles (64 bytes) test 12 (256 bit key, 256 byte blocks): 1 operation in 842 cycles (256 bytes) test 13 (256 bit key, 1024 byte blocks): 1 operation in 2383 cycles (1024 bytes) test 14 (256 bit key, 8192 byte blocks): 1 operation in 16945 cycles (8192 bytes) testing speed of __ctr-aes-aesni decryption test 0 (128 bit key, 16 byte blocks): 1 operation in 389 cycles (16 bytes) test 1 (128 bit key, 64 byte blocks): 1 operation in 409 cycles (64 bytes) test 2 (128 bit key, 256 byte blocks): 1 operation in 704 cycles (256 bytes) test 3 (128 bit key, 1024 byte blocks): 1 operation in 1865 cycles (1024 bytes) test 4 (128 bit key, 8192 byte blocks): 1 operation in 12783 cycles (8192 bytes) test 5 (192 bit key, 16 byte blocks): 1 operation in 409 cycles (16 bytes) test 6 (192 bit key, 64 byte blocks): 1 operation in 434 cycles (64 bytes) test 7 (192 bit key, 256 byte blocks): 1 operation in 792 cycles (256 bytes) test 8 (192 bit key, 1024 byte blocks): 1 operation in 2151 cycles (1024 bytes) test 9 (192 bit key, 8192 byte blocks): 1 operation in 15804 cycles (8192 bytes) test 10 (256 bit key, 16 byte blocks): 1 operation in 421 cycles (16 bytes) test 11 (256 bit key, 64 byte blocks): 1 operation in 444 cycles (64 bytes) test 12 (256 bit key, 256 byte blocks): 1 operation in 840 cycles (256 bytes) test 13 (256 bit key, 1024 byte blocks): 1 operation in 2394 cycles (1024 bytes) test 14 (256 bit key, 8192 byte blocks): 1 operation in 16928 cycles (8192 bytes) tcrypt log with "by8" AES CTR mode optimization on Sandybridge -------------------------------------------------------------- testing speed of __ctr-aes-aesni encryption test 0 (128 bit key, 16 byte blocks): 1 operation in 383 cycles (16 bytes) test 1 (128 bit key, 64 byte blocks): 1 operation in 401 cycles (64 bytes) test 2 (128 bit key, 256 byte blocks): 1 operation in 522 cycles (256 bytes) test 3 (128 bit key, 1024 byte blocks): 1 operation in 1136 cycles (1024 bytes) test 4 (128 bit key, 8192 byte blocks): 1 operation in 7046 cycles (8192 bytes) test 5 (192 bit key, 16 byte blocks): 1 operation in 394 cycles (16 bytes) test 6 (192 bit key, 64 byte blocks): 1 operation in 418 cycles (64 bytes) test 7 (192 bit key, 256 byte blocks): 1 operation in 559 cycles (256 bytes) test 8 (192 bit key, 1024 byte blocks): 1 operation in 1263 cycles (1024 bytes) test 9 (192 bit key, 8192 byte blocks): 1 operation in 9072 cycles (8192 bytes) test 10 (256 bit key, 16 byte blocks): 1 operation in 408 cycles (16 bytes) test 11 (256 bit key, 64 byte blocks): 1 operation in 428 cycles (64 bytes) test 12 (256 bit key, 256 byte blocks): 1 operation in 595 cycles (256 bytes) test 13 (256 bit key, 1024 byte blocks): 1 operation in 1385 cycles (1024 bytes) test 14 (256 bit key, 8192 byte blocks): 1 operation in 9224 cycles (8192 bytes) testing speed of __ctr-aes-aesni decryption test 0 (128 bit key, 16 byte blocks): 1 operation in 390 cycles (16 bytes) test 1 (128 bit key, 64 byte blocks): 1 operation in 402 cycles (64 bytes) test 2 (128 bit key, 256 byte blocks): 1 operation in 530 cycles (256 bytes) test 3 (128 bit key, 1024 byte blocks): 1 operation in 1135 cycles (1024 bytes) test 4 (128 bit key, 8192 byte blocks): 1 operation in 7079 cycles (8192 bytes) test 5 (192 bit key, 16 byte blocks): 1 operation in 414 cycles (16 bytes) test 6 (192 bit key, 64 byte blocks): 1 operation in 417 cycles (64 bytes) test 7 (192 bit key, 256 byte blocks): 1 operation in 572 cycles (256 bytes) test 8 (192 bit key, 1024 byte blocks): 1 operation in 1312 cycles (1024 bytes) test 9 (192 bit key, 8192 byte blocks): 1 operation in 9073 cycles (8192 bytes) test 10 (256 bit key, 16 byte blocks): 1 operation in 415 cycles (16 bytes) test 11 (256 bit key, 64 byte blocks): 1 operation in 454 cycles (64 bytes) test 12 (256 bit key, 256 byte blocks): 1 operation in 598 cycles (256 bytes) test 13 (256 bit key, 1024 byte blocks): 1 operation in 1407 cycles (1024 bytes) test 14 (256 bit key, 8192 byte blocks): 1 operation in 9288 cycles (8192 bytes) crypto: Fix redundant checks a) Fix the redundant check for cpu_has_aes b) Fix the key length check when invoking the CTR mode "by8" encryptor/decryptor. crypto: fix typo in AES ctr mode transform Signed-off-by: Chandramouli Narayanan <mouli@linux.intel.com> Reviewed-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-