1. 19 Oct, 2004 29 commits
    • Christoph Hellwig's avatar
      [PATCH] remove pm_find, unexport pm_send · 71ccd42c
      Christoph Hellwig authored
      cutting back some unused legacy PM code
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      71ccd42c
    • Christoph Hellwig's avatar
      [PATCH] don't export shmem_file_setup · 733902e4
      Christoph Hellwig authored
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      733902e4
    • Christoph Hellwig's avatar
      [PATCH] remove posix_acl_masq_nfs_mode · abbb0399
      Christoph Hellwig authored
      Completely unused but exported function in fs/posix_acl.c
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      abbb0399
    • Christoph Hellwig's avatar
      [PATCH] remove dead code from fs/mbcache.c · 8704c669
      Christoph Hellwig authored
      mb_cache_entry_takeout and mb_cache_entry_dup are totally unused.
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      8704c669
    • Christoph Hellwig's avatar
      [PATCH] don't export blkdev_open and def_blk_ops · 1cd05ead
      Christoph Hellwig authored
      Already since 2.4 all block devices use block_device_operations and
      shouldn't deal with file operations directly.
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      1cd05ead
    • Jens Axboe's avatar
      [PATCH] convert jiffies <-> msecs for io schedulers · d55249d3
      Jens Axboe authored
      The various io schedulers don't convert to and from jiffies and ms in their
      sysfs exported values.  This patch adds that.
      Signed-off-by: default avatarJens Axboe <axboe@suse.de>
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      d55249d3
    • Jens Axboe's avatar
      [PATCH] cfq-v2 I/O scheduler update · f9887e4a
      Jens Axboe authored
      Here is the next incarnation of the CFQ io scheduler, so far known as
      CFQ v2 locally. It attempts to address some of the limitations of the
      original CFQ io scheduler (hence forth known as CFQ v1). Some of the
      problems with CFQ v1 are:
      
      - It does accounting for the lifetime of the cfq_queue, which is setup
        and torn down for the time when a process has io in flight. For a fork
        heavy work load (such as a kernel compile, for instance), new
        processes can effectively starve io of running processes. This is in
        part due to the fact that CFQ v1 gives preference to a new processes
        to get better latency numbers. Removing that heuristic is not an
        option exactly because of that.
      
      - It makes no attempts to address inter-cfq_queue fairness.
      
      - It makes no attempt to limit upper latency bound of a single request.
      
      - It only provides per-tgid grouping. You need to change the source to
        group on a different criteria.
      
      - It uses a mempool for the cfq_queues. Theoretically this could
        deadlock if io bound processes never exit.
      
      - The may_queue() logic can be unfair since it fluctuates quickly, thus
        leaving processes sleeping while new processes are allowed to allocate
        a request.
      
      CFQ v2 attempts to fix these issues. It uses the process io_context
      logic to maintain a cfq_queue lifetime of the duration of the process
      (and its io). This means we can now be a lot more clever in deciding
      which process is allowed to queue or dispatch io to the device. The
      cfq_io_context is per-process per-queue, this is an extension to what AS
      currently does in that we truly do have a unique per-process identifier
      for io grouping. Busy queues are sorted by service time used, sub sorted
      by in_flight requests. Queues that have no io in flight are also
      preferred at dispatch time.
      
      Accounting is done on completion time of a request, or with a fixed cost
      for tagged command queueing. Requests are fifo'ed like with deadline, to
      make sure that a single request doesn't stay in the io scheduler for
      ages.
      
      Process grouping is selectable at runtime. I provide 4 grouping
      criterias: process group, thread group id, user id, and group id.
      
      As usual, settings are sysfs tweakable in /sys/block/<dev>/queue/iosched
      
      axboe@apu:[.]s/block/hda/queue/iosched $ ls
      back_seek_max      fifo_batch_expire  find_best_crq  queued
      back_seek_penalty  fifo_expire_async  key_type       show_status
      clear_elapsed      fifo_expire_sync   quantum        tagged
      
      In order, each of these settings control:
      
      back_seek_max
      back_seek_penalty:
      	Useful logic stolen from AS that allow small backwards seeks in
      	the io stream if we deem them useful. CFQ uses a strict
      	ascending elevator otherwise. _max controls the maximum allowed
      	backwards seek, defaulting to 16MiB. _penalty denotes how
      	expensive we account a backwards seek compared to a forward
      	seek. Default is 2, meaning it's twice as expensive.
      
      clear_elapsed:
      	Really a debug switch, will go away in the future. It clears the
      	maximum values for completion and dispatch time, shown in
      	show_status.
      
      fifo_batch_expire
      fifo_batch_async
      fifo_batch_sync:
      	The settings for the expiry fifo. batch_expire is how often we
      	allow the fifo expire to control which request to select.
      	Default is 125ms. _async is the deadline for async requests
      	(typically writes), _sync is the deadline for sync requests
      	(reads and sync writes). Defaults are, respectively, 5 seconds
      	and 0.5 seconds.
      
      key_type:
      	The grouping key. Can be set to pgid, tgid, uid, or gid. The
      	current value is shown bracketed:
      
      	axboe@apu:[.]s/block/hda/queue/iosched $ cat key_type
      	[pgid] tgid uid gid
      
      	Default is tgid. To set, simply echo any of the 4 words into the
      	file.
      
      quantum:
      	The amount of requests we select for dispatch when the driver
      	asks for work to do and the current pending list is empty.
      	Default is 4.
      
      queued:
      	The minimum amount of requests a group is allowed to queue.
      	Default is 8.
      
      show_status:
      	Debug output showing the current state of the queues.
      
      tagged:
      	Set this to 1 if the device is using tagged command queueing.
      	This cannot be reliably detected by CFQ yet, since most drivers
      	don't use the block layer (well it could, by looking at number
      	of requests being between dispatch and completion. but not
      	completely reliably). Default is 0.
      
      The patch is a little big, but works reliably here on my laptop. There
      are a number of other changes and fixes in there (like converting to
      hlist for hashes). The code is commented a lot better, CFQ v1 has
      basically no comments (reflecting that it was writting in one go, no
      touched or tuned much since then). This is of course only done to
      increase the AAF, akpm acceptance factor. Since I'm on the road, I
      cannot provide any really good numbers of CFQ v1 compared to v2, maybe
      someone will help me out there.
      Signed-off-by: default avatarJens Axboe <axboe@suse.de>
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      f9887e4a
    • Jens Axboe's avatar
      [PATCH] switchable and modular io schedulers · df02202c
      Jens Axboe authored
      This patch modularizes the io schedulers completely, allowing them to be
      modular.  Additionally it enables online switching of io schedulers.  See
      also http://lwn.net/Articles/102593/ .
      
      
      There's a scheduler file in the sysfs directory for the block device
      queue:
      
      axboe@router:/sys/block/hda/queue> ls
      iosched            max_sectors_kb  read_ahead_kb
      max_hw_sectors_kb  nr_requests     scheduler
      
      If you list the contents of the file, it will show available schedulers
      and the active one:
      
      axboe@router:/sys/block/hda/queue> cat scheduler
      [cfq]
      
      Lets load a few more.
      
      router:/sys/block/hda/queue # modprobe deadline-iosched
      router:/sys/block/hda/queue # modprobe as-iosched
      router:/sys/block/hda/queue # cat scheduler
      [cfq] deadline anticipatory
      
      Changing is done with
      
      router:/sys/block/hda/queue # echo deadline > scheduler
      router:/sys/block/hda/queue # cat scheduler
      cfq [deadline] anticipatory
      
      deadline is now the new active io scheduler for hda.
      Signed-off-by: default avatarJens Axboe <axboe@suse.de>
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      df02202c
    • Andrew Morton's avatar
      [PATCH] unreachable code in ext3_direct_IO() · 3d3d8747
      Andrew Morton authored
      davej points out that in this code local variable `ret' is already known to be
      positive non-zero, so this test is meaningless.
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      3d3d8747
    • Andrew Morton's avatar
      [PATCH] jbd wakeup fix · 91cd0c2b
      Andrew Morton authored
      Processes can sleep in do_get_write_access(), waiting for buffers to be
      removed from the BJ_Shadow state.  We did this by doing a wake_up_buffer() in
      the commit path and sleeping on the buffer in do_get_write_access().
      
      With the filtered bit-level wakeup code this doesn't work properly any more -
      the wake_up_buffer() accidentally wakes up tasks which are sleeping in
      lock_buffer() as well.  Those tasks now implicitly assume that the buffer came
      unlocked.  Net effect: Bogus I/O errors when reading journal blocks, because
      the buffer isn't up to date yet.  Hence the recently spate of journal_bmap()
      failure reports.
      
      The patch creates a new jbd-private BH flag purely for this wakeup function.
      So a wake_up_bit(..., BH_Unshadow) doesn't wake up someone who is waiting for
      a wake_up_bit(BH_Lock).
      
      JBD was the only user of wake_up_buffer(), so remove it altogether.
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      91cd0c2b
    • William Lee Irwin III's avatar
      [PATCH] document wake_up_bit()'s requirement for preceding memory barriers · a8589849
      William Lee Irwin III authored
      Document the requirement to use a memory barrier prior to wake_up_bit().
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      a8589849
    • William Lee Irwin III's avatar
      [PATCH] reduce number of parameters to __wait_on_bit() and __wait_on_bit_lock() · 9659cc89
      William Lee Irwin III authored
      Some of the parameters to __wait_on_bit() and __wait_on_bit_lock() are
      redundant, as the wait_bit_queue parameter holds the flags word and the bit
      number.  This patch updates __wait_on_bit() and __wait_on_bit_lock() to
      fetch that information from the wait_bit_queue passed to them and so reduce
      the number of parameters so that -mregparm may be more effective.
      
      Incremental atop the complete out-of-lining of the contention cases and the
      fastcall and wait_on_bit_lock()/test_and_set_bit() fixes.
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      9659cc89
    • William Lee Irwin III's avatar
      [PATCH] move wait ops' contention case completely out of line · bc341c61
      William Lee Irwin III authored
      Move the slow paths of wait_on_bit() and wait_on_bit_lock() out of line.
      Also uninline wake_up_bit() to reduce the number of callsites generated,
      and adjust loop startup in __wait_on_bit_lock() to properly reflect its
      usage in the contention case.
      
      Incremental atop the fastcall and wait_on_bit_lock()/test_and_set_bit()
      fixes.  Successfully tested on x86-64.
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      bc341c61
    • William Lee Irwin III's avatar
      [PATCH] eliminate inode waitqueue hashtable · 493267b6
      William Lee Irwin III authored
      Eliminate the inode waitqueue hashtable using bit_waitqueue() via
      wait_on_bit() and wake_up_bit() to locate the waitqueue head associated
      with a bit.
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      493267b6
    • William Lee Irwin III's avatar
      [PATCH] eliminate bh waitqueue hashtable · 525b64cd
      William Lee Irwin III authored
      Eliminate the bh waitqueue hashtable using bit_waitqueue() via
      wait_on_bit() and wake_up_bit() to locate the waitqueue head associated
      with a bit.
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      525b64cd
    • William Lee Irwin III's avatar
      [PATCH] consolidate bit waiting code patterns · baa896b3
      William Lee Irwin III authored
      Consolidate bit waiting code patterns for page waitqueues using
      __wait_on_bit() and __wait_on_bit_lock().
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      baa896b3
    • William Lee Irwin III's avatar
      [PATCH] standardize bit waiting data type · fd4d36bf
      William Lee Irwin III authored
      Eliminate specialized page and bh waitqueue hashing structures in favor of
      a standardized structure, using wake_up_bit() to wake waiters using the
      standardized wait_bit_key structure.
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      fd4d36bf
    • William Lee Irwin III's avatar
      [PATCH] move waitqueue functions to kernel/wait.c · d7988992
      William Lee Irwin III authored
      The following patch series consolidates the various instances of waitqueue
      hashing to use a uniform structure and share the per-zone hashtable among all
      waitqueue hashers.  This is expected to increase the number of hashtable
      buckets available for waiting on bh's and inodes and eliminate statically
      allocated kernel data structures for greater node locality and reduced kernel
      image size.  Some attempt was made to look similar to Oleg Nesterov's
      suggested API in order to provide some kind of credit for independent
      invention of something very similar (the original versions of these patches
      predated my public postings on the subject of filtered waitqueues).
      
      These patches have the further benefit and intention of enabling aio to use
      filtered wakeups by standardizing the data structure passed to wake functions
      so that embedded waitqueue elements in aio structures may be succesfully
      passed to the filtered wakeup wake functions, though this patch series doesn't
      implement that particular functionality.
      
      Successfully stress-tested on x86-64, and ia64 in recent prior versions.
      
      
      This patch:
      
      Move waitqueue -related functions not needing static functions in sched.c
      to kernel/wait.c
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      d7988992
    • Olaf Dabrunz's avatar
      [PATCH] TIOCCONS security · d05dd6d0
      Olaf Dabrunz authored
      The ioctl TIOCCONS allows any user to redirect console output to another
      tty.  This allows anyone to suppress messages to the console at will.
      
      AFAIK nowadays not many programs write to /dev/console, except for start
      scripts and the kernel (printk() above console log level).
      
      Still, I believe that administrators and operators would not like any user
      to be able to hijack messages that were written to the console.
      
      The only user of TIOCCONS that I am aware of is bootlogd/blogd, which runs
      as root.  Please comment if there are other users.
      
      Is there any reason why normal users should be able to use TIOCCONS?
      
      Otherwise I would suggest to restrict access to root (CAP_SYS_ADMIN), e.g. 
      with this patch.
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      d05dd6d0
    • Paulo Marques's avatar
      [PATCH] kallsyms data size reduction / lookup speedup · e1039211
      Paulo Marques authored
      This patch is an improvement over my first kallsyms speedup patch posted about
      2 weeks ago.
      
      It changes scripts/kallsyms as to produce a different format for
      kallsyms_names and extra data to speedup lookups.  The compression algorithm
      is quite simple: it uses all the char codes not actually used in symbols to
      build a lookup table that translates these codes into small strings.  For
      instance, in my test runs the code 0xFE was being translated into "acpi_"
      giving a 4 byte save on every translation.
      
      The advantage of this algorithm is that to translate a symbol we only require
      information that is stored on that symbol position, and never need to go back
      on the compressed stream to get information from other symbols.
      
      To give an idea about the benefits of this algorithm here are some benchmark
      results on a P4 2.8GHz with a symbol table with 10000 entries:
      
      kallsyms_lookup average time:
        vanilla           1346.0 us
        speedup             14.4 us
        with this patch      0.5 us
      
      total data produced by scripts/kallsyms:
        uncompressed         169 Kb
        vanilla              134 Kb
        with this patch       91 Kb
      
      (speedup was my latest patch, that only changed the way kallsyms_lookup worked
      and not the data format)
      
      I removed a cond_resched() from the proc/kallsyms handling code path, because
      using stem compression, if the current position went backwards, the hole
      stream would be uncompressed up to the current position.  It seemed that by
      removing this loop it would be safe to remove the conditional reschedule
      altogether.
      
      There is just one catch with this patch: the time it takes to compile the
      kernel goes up just a bit (about 0.8s on a P4 2.8GHz with defconfig).  If this
      delay is not acceptable I can change the compression algorithm so that it can
      use the previous table (calculating a new table is what consumes most of the
      time, and not doing the actual compression) and check to see if it obtains a
      similar compression ratio.  If it does, then this is a sign that the symbol
      patterns haven't changed that much and this table is still good to use.  This
      would not only cut the time down to half on any compilation (because of the 2
      pass symbol build method), but in frequent cases where a developer is
      compiling a single file and linking everything over and over again, the table
      optimization process would never run.
      
      I'm CC'ing Brent Casavant on this email, because last june he sent a patch
      trying a different approach that used a 32 entry symbol cache, because there
      was a problem with the time "top" took to read "proc/<pid>/wchan".  I was
      hopping he would be willing to test this patch and comment on the results.
      Signed-off-by: default avatarPaulo Marques <pmarques@grupopie.com>
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      e1039211
    • David Howells's avatar
      [PATCH] implement in-kernel keys & keyring management · e4262f59
      David Howells authored
      The feature set the patch includes:
      
       - Key attributes:
         - Key type
         - Description (by which a key of a particular type can be selected)
         - Payload
         - UID, GID and permissions mask
         - Expiry time
       - Keyrings (just a type of key that holds links to other keys)
       - User-defined keys
       - Key revokation
       - Access controls
       - Per user key-count and key-memory consumption quota
       - Three std keyrings per task: per-thread, per-process, session
       - Two std keyrings per user: per-user and default-user-session
       - prctl() functions for key and keyring creation and management
       - Kernel interfaces for filesystem, blockdev, net stack access
       - JIT key creation by usermode helper
      
      There are also two utility programs available:
      
       (*) http://people.redhat.com/~dhowells/keys/keyctl.c
      
           A comprehensive key management tool, permitting all the interfaces
           available to userspace to be exercised.
      
       (*) http://people.redhat.com/~dhowells/keys/request-key
      
           An example shell script (to be installed in /sbin) for instantiating a
           key.
      Signed-Off-By: default avatarDavid Howells <dhowells@redhat.com>
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      e4262f59
    • David Howells's avatar
      [PATCH] keys: new error codes for Alpha, MIPS, PA-RISC, Sparc & Sparc64 · 322f317d
      David Howells authored
      The attached patch adds the new error codes I added for key-related errors to
      those archs that don't make use of <asm-generic/errno.h>, including Alpha,
      MIPS, PA-RISC, Sparc and Sparc64.  This is required to compile with
      CONFIG_KEYS on those platforms.
      Signed-Off-By: default avatarDavid Howells <dhowells@redhat.com>
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      322f317d
    • David Howells's avatar
      [PATCH] Add some key management specific error codes · c6ac5ab1
      David Howells authored
      Here's a patch to add some new error codes specific to key management.
      Signed-Off-By: default avatarDavid Howells <dhowells@redhat.com>
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      c6ac5ab1
    • Andrew Morton's avatar
      [PATCH] reiserfs: rename struct key · 6f1afa77
      Andrew Morton authored
      Rename resierfs's `struct key' to `struct reiserfs_key' to avoid namespace
      clashes.
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      6f1afa77
    • Matthew Dobson's avatar
      [PATCH] Create nodemask_t · 59356466
      Matthew Dobson authored
      The idea behind this patch is to create a nodemask_t as a node analog of
      cpumask_t.  As NUMA machines become more common, the need for a standard,
      cross-platform bitmap of both online & possible nodes becomes more
      apparent.  We believe we've worked out most of the kinks of the variable
      length bitmap types with the recent cpumask_t patches.  Nodemasks are also
      currently far less widespread than cpumasks.  Further, inclusion at this
      point in the kernel would mean consistency in node handling between 2.6 and
      2.7.
      
      Future goals would be to get rid of the 'numnodes' variable used to count
      the number of online nodes, and replace with node_online_map.  This would
      allow arbitrary node numbering and facilitate node hotplugging.
      
      (Nothing actually uses this yet, but several projects need it, and it does
      model a well-defined physical grouping).
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      59356466
    • Peter Osterlund's avatar
      [PATCH] cdrom: buffer sizing fix · 66d5cab9
      Peter Osterlund authored
      The problem is that some drives fail the "GET CONFIGURATION" command when
      asked to only return 8 bytes.  This happens for example on my drive, which
      is identified as:
      
              hdc: HL-DT-ST DVD+RW GCA-4040N, ATAPI CD/DVD-ROM drive
      
      Since the cdrom_mmc3_profile() function already allocates 32 bytes for the
      reply buffer, this patch is enough to make the command succeed on my drive.
      Signed-off-by: default avatarPeter Osterlund <petero2@telia.com>
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      66d5cab9
    • Peter Osterlund's avatar
      [PATCH] CDRW packet writing support · 2f8e2dc8
      Peter Osterlund authored
      This patch implements CDRW packet writing as a kernel block device.  Usage
      instructions are in the packet-writing.txt file.
      
      A hint: If you don't want to wait for a complete disc format, you can
      format just a part of the disc.  For example:
      
              cdrwtool -d /dev/hdc -m 10240
      
      This will format 10240 blocks, ie 20MB.
      Signed-off-by: default avatarPeter Osterlund <petero2@telia.com>
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      2f8e2dc8
    • Peter Osterlund's avatar
      [PATCH] packet-writing: add credits · a7cbd7da
      Peter Osterlund authored
      Nigel pointed out that the earlier patches contained attributions that
      are not present in this patch. The 2.4 patch contains:
      
        Nov 5 2001, Aug 8 2002. Modified by Andy Polyakov
        <appro@fy.chalmers.se> to support MMC-3 complaint DVD+RW units.
      
      and Nigel changed it to this in his 2.6 patch:
      
        Modified by Nigel Kukard <nkukard@lbsd.net> - support DVD+RW
        2.4.x patch by Andy Polyakov <appro@fy.chalmers.se>
      
      The patch I sent you deleted most of the earlier work and moved the
      rest to cdrom.c, but the comments were not moved over, since the
      earlier authors didn't modify cdrom.c.
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      a7cbd7da
    • Peter Osterlund's avatar
      [PATCH] DVD+RW support · ed594d2d
      Peter Osterlund authored
      This patch adds support for using DVD+RW drives as writable block devices.
      
      The patch is based on work from:
      
              Andy Polyakov <appro@fy.chalmers.se> - Wrote the 2.4 patch
              Nigel Kukard <nkukard@lbsd.net> - Initial porting to 2.6.x
      
      It works for me using an Iomega Super DVD 8x USB drive.
      
      
        Nov 5 2001, Aug 8 2002. Modified by Andy Polyakov
        <appro@fy.chalmers.se> to support MMC-3 complaint DVD+RW units.
      
        Modified by Nigel Kukard <nkukard@lbsd.net> - support DVD+RW
        2.4.x patch by Andy Polyakov <appro@fy.chalmers.se>
      
      This patch implements CDRW packet writing as a kernel block device.  Usage
      instructions are in the packet-writing.txt file.
      
      A hint: If you don't want to wait for a complete disc format, you can
      format just a part of the disc.  For example:
      
              cdrwtool -d /dev/hdc -m 10240
      
      This will format 10240 blocks, ie 20MB.
      Signed-off-by: default avatarPeter Osterlund <petero2@telia.com>
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      ed594d2d
  2. 18 Oct, 2004 11 commits
    • Linus Torvalds's avatar
      Fix pci config syscall definitions. · a4946826
      Linus Torvalds authored
      Including the proper header file showed that they didn't
      match the declared prototypes.
      a4946826
    • Linus Torvalds's avatar
      Don't use obsolete gcc named initializer syntax. · c1e08b84
      Linus Torvalds authored
      The proper C99 syntax is much preferred.
      c1e08b84
    • Linus Torvalds's avatar
      Fix old-style fn declaration. · e3303e02
      Linus Torvalds authored
      e3303e02
    • Jens Axboe's avatar
      [PATCH] return full SCSI status byte in SG_IO · fa0e5198
      Jens Axboe authored
      This has been around for a while. Return the full scsi result byte in
      rq->errors for SG_IO generated requests.
      Signed-off-by: default avatarJens Axboe <axboe@suse.de>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      fa0e5198
    • Ingo Molnar's avatar
      [PATCH] fix & clean up zombie/dead task handling & preemption · d3069b4d
      Ingo Molnar authored
      This patch fixes all the preempt-after-task->state-is-TASK_DEAD problems we
      had.  Right now, the moment procfs does a down() that sleeps in
      proc_pid_flush() [it could] our TASK_DEAD state is zapped and we might be
      back to TASK_RUNNING to and we trigger this assert:
      
              schedule();
              BUG();
              /* Avoid "noreturn function does return".  */
              for (;;) ;
      
      I have split out TASK_ZOMBIE and TASK_DEAD into a separate p->exit_state
      field, to allow the detaching of exit-signal/parent/wait-handling from
      descheduling a dead task.  Dead-task freeing is done via PF_DEAD.
      
      Tested the patch on x86 SMP and UP, but all architectures should work
      fine.
      Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      d3069b4d
    • Ingo Molnar's avatar
      [PATCH] sched: fix SCHED_SMT & numa=fake=2 lockup · 7a9a3e86
      Ingo Molnar authored
      This patch fixes an interaction between the numa=fake=<domains> feature,
      the domain setup code and cpu_siblings_map[].  The bug leads to a bootup
      crash when using numa=fake=2 on a 2-way/4-way SMP+HT box.
      
      When SCHED_SMT is turned on the domains-setup code relies on siblings not
      spanning multiple domains (which makes perfect sense).  But numa=fake=2
      creates an assymetric 1101/0010 splitup between CPUs, which results in two
      siblings being on different nodes.
      
      The patch adds a check_siblings_map() function that checks the sibling maps
      and fixes them up if they violate this rule.  (it also prints a warning in
      that case.)
      
      The patch also turns SCHED_DOMAIN_DEBUG back on - had this been enabled
      we'd have noticed this bug much earlier.
      
      From: Badari Pulavarty <pbadari@us.ibm.com>
      
        arch/x86_64/mm/numa.c: In function `numa_setup':
        arch/x86_64/mm/numa.c:332: error: `numa_fake' undeclared (first use in this function)
        arch/x86_64/mm/numa.c:332: error: (Each undeclared identifier is reported only once
        arch/x86_64/mm/numa.c:332: error: for each function it appears in.)
      Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      7a9a3e86
    • Matthew Dobson's avatar
      [PATCH] sched: remove NODE_BALANCE_RATE definitions · ad5f30c4
      Matthew Dobson authored
      NODE_BALANCE_RATE is defined all over the place, but used nowhere.  Let's
      remove it.
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      ad5f30c4
    • Matthew Dobson's avatar
      [PATCH] sched_domains: Make SD_NODE_INIT per-arch #2 · 7b2565a8
      Matthew Dobson authored
      Here's yet another version of a patch to implement per-arch SD_*_INITs. 
      This follows the same basic idea of my last patch, but
      
      1) defines an arch-specific SD_NODE_INIT for the 4 NUMA arches (i386,
         x86_64, IA64 & PPC64),
      
      2) defines *default* SD_CPU_INIT & SD_SIBLING_INIT for *all* arches,
         with the possibility of them being overridden by simply defining an
         arch-specific version in include/asm/topology.h.
      
      The motivation behind the third version of this patch is that Martin feels
      that there should be no "default" NUMA initializer because NUMA
      characteristics are *very* arch/platform specific, and hence a "default"
      NUMA initializer can only lead to confusion.  I agree with most of that,
      but don't quite see as much harm in having a default as he does.
      Nevertheless, to keep him quiet, I've run up this version of the patch. 
      Martin, please run this through your magic test suite and make sure I
      didn't break anything trivial.
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      7b2565a8
    • Peter Williams's avatar
      [PATCH] CPU Scheduler: fix potential error in runqueue nr_uninterruptible count · 95a2f6d7
      Peter Williams authored
      Problem:
      
      In the function try_to_wake_up(), when the runqueue's nr_uninterruptible
      field is decremented it's possible (on SMP systems) that the pointer no
      longer points to the runqueue that the task being woken was on when it went
      to sleep.  This would cause the wrong runqueue's field to be decremented
      and the correct one tp remain unchanged.
      
      Fix:
      
      Save a pointer to the old runqueue at the beginning of the function and use
      it when decrementing nr_uninterruptible.
      Signed-off-by: default avatarPeter Williams <pwil3058@bigpond.net.au>
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      95a2f6d7
    • Andrew Morton's avatar
      [PATCH] sched: print preempt count · c0799016
      Andrew Morton authored
      Better debugging output when the CPU scheduler detects atomicity errors.
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      c0799016
    • Nick Piggin's avatar
      [PATCH] sched: fixes for ia64 domain setup · c80f2dee
      Nick Piggin authored
      Still having some trouble with ia64 domain setup on the Altixes.  Jesse
      hasn't had much time to look into it, and I'm lacking an Altix, so I'm not
      sure if this is right or not...
      
      Anyway, it again does the right thing on the NUMAQ, and fixes some real
      bugs, so can you include it please?
      
      * Increase SD_NODES_PER_DOMAIN to 6 from 4 to better match Altix's
         topology. A setting of 4 will include this node, the other one
         in the brick, and the 2 nodes in the next closest brick, while 6
         will catch 2 other bricks. Probably it could be increased even
         more.
      
      * Work correctly with sparse and not completely full node maps.
      
      * Nasty typo fixed in find_next_best_node:
      	-               val = node_distance(node, i);
      	+               val = node_distance(node, n);
      
      * Ensure all nodes are themselves a member of their numa balancing
         domain. This is more a precaution against creative implementations
         of node_distance.. but it makes the setup easier to verify without
         having to look at a table of node_distance's, which is possibly
         generated at runtime.
      
      So again, I'm not too sure if this will fix the Altix setup or not.  But if
      you do a release, it will surely be less broken than it was before.
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      c80f2dee