The logic for dynamic ITR update is confusing at best as there were odd
paths chosen for how to find the rings associated with a given queue based
on the vector index and other inconsistencies throughout the code.

This patch is an attempt to clean up the logic so that we can more easily
understand what is going on. Specifically if there is a Rx or Tx ring that
is enabled in dynamic mode on the q_vector it is allowed to override the
other side of the interrupt moderation. While it isn't correct all this
patch is doing is cleaning up the logic for now so that when we come
through and fix it we can more easily identify that this is wrong.

The other big change made here is that we replace references to:
	vsi->rx_rings[q_vector->v_idx]->itr_setting
with:
	q_vector->rx.ring->itr_setting

The general idea is we can avoid the long pointer chase since just
accessing q_vector->rx.ring is a single pointer access versus having to
chase down vsi->rx_rings, and then finding the pointer in the array, and
finally chasing down the itr_setting from there.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

The rings are already split out into Tx and Rx rings so it doesn't make
sense to have any single ring store both a Tx and Rx itr_setting value.
Since that is the case drop the pair in favor of storing just a single ITR
value.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

'bufer' should be 'buffer'
Signed-off-by: Alan Brady <alan.brady@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Pull more Kbuild updates from Masahiro Yamada:
 "Makefile changes:
   - enable unused-variable warning that was wrongly disabled for clang

  Kconfig changes:
   - warn about blank 'help' and fix existing instances
   - fix 'choice' behavior to not write out invisible symbols
   - fix misc weirdness

  Coccinell changes:
   - fix false positive of free after managed memory alloc detection
   - improve performance of NULL dereference detection"

* tag 'kbuild-v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (21 commits)
  kconfig: remove const qualifier from sym_expand_string_value()
  kconfig: add xrealloc() helper
  kconfig: send error messages to stderr
  kconfig: echo stdin to stdout if either is redirected
  kconfig: remove check_stdin()
  kconfig: remove 'config*' pattern from .gitignnore
  kconfig: show '?' prompt even if no help text is available
  kconfig: do not write choice values when their dependency becomes n
  coccinelle: deref_null: avoid useless computation
  coccinelle: devm_free: reduce false positives
  kbuild: clang: disable unused variable warnings only when constant
  kconfig: Warn if help text is blank
  nios2: kconfig: Remove blank help text
  arm: vt8500: kconfig: Remove blank help text
  MIPS: kconfig: Remove blank help text
  MIPS: BCM63XX: kconfig: Remove blank help text
  lib/Kconfig.debug: Remove blank help text
  Staging: rtl8192e: kconfig: Remove blank help text
  Staging: rtl8192u: kconfig: Remove blank help text
  mmc: kconfig: Remove blank help text
  ...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull misc vfs fixes from Al Viro.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  seq_file: fix incomplete reset on read from zero offset
  kernfs: fix regression in kernfs_fop_write caused by wrong type

This function returns realloc'ed memory, so the returned pointer
must be passed to free() when done.  So, 'const' qualifier is odd.
It is allowed to modify the expanded string.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

We already have xmalloc(), xcalloc().  Add xrealloc() as well
to save tedious error handling.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Pull networking fixes from David Miller:

 1) Make allocations less aggressive in x_tables, from Minchal Hocko.

 2) Fix netfilter flowtable Kconfig deps, from Pablo Neira Ayuso.

 3) Fix connection loss problems in rtlwifi, from Larry Finger.

 4) Correct DRAM dump length for some chips in ath10k driver, from Yu
    Wang.

 5) Fix ABORT handling in rxrpc, from David Howells.

 6) Add SPDX tags to Sun networking drivers, from Shannon Nelson.

 7) Some ipv6 onlink handling fixes, from David Ahern.

 8) Netem packet scheduler interval calcualtion fix from Md. Islam.

 9) Don't put crypto buffers on-stack in rxrpc, from David Howells.

10) Fix handling of error non-delivery status in netlink multicast
    delivery over multiple namespaces, from Nicolas Dichtel.

11) Missing xdp flush in tuntap driver, from Jason Wang.

12) Synchonize RDS protocol netns/module teardown with rds object
    management, from Sowini Varadhan.

13) Add nospec annotations to mpls, from Dan Williams.

14) Fix SKB truesize handling in TIPC, from Hoang Le.

15) Interrupt masking fixes in stammc from Niklas Cassel.

16) Don't allow ptr_ring objects to be sized outside of kmalloc's
    limits, from Jason Wang.

17) Don't allow SCTP chunks to be built which will have a length
    exceeding the chunk header's 16-bit length field, from Alexey
    Kodanev.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (82 commits)
  ibmvnic: Remove skb->protocol checks in ibmvnic_xmit
  bpf: fix rlimit in reuseport net selftest
  sctp: verify size of a new chunk in _sctp_make_chunk()
  s390/qeth: fix SETIP command handling
  s390/qeth: fix underestimated count of buffer elements
  ptr_ring: try vmalloc() when kmalloc() fails
  ptr_ring: fail early if queue occupies more than KMALLOC_MAX_SIZE
  net: stmmac: remove redundant enable of PMT irq
  net: stmmac: rename GMAC_INT_DEFAULT_MASK for dwmac4
  net: stmmac: discard disabled flags in interrupt status register
  ibmvnic: Reset long term map ID counter
  tools/libbpf: handle issues with bpf ELF objects containing .eh_frames
  selftests/bpf: add selftest that use test_libbpf_open
  selftests/bpf: add test program for loading BPF ELF files
  tools/libbpf: improve the pr_debug statements to contain section numbers
  bpf: Sync kernel ABI header with tooling header for bpf_common.h
  net: phy: fix phy_start to consider PHY_IGNORE_INTERRUPT
  net: thunder: change q_len's type to handle max ring size
  tipc: fix skb truesize/datasize ratio control
  net/sched: cls_u32: fix cls_u32 on filter replace
  ...

Pull more NFS client updates from Trond Myklebust:
 "A few bugfixes and some small sunrpc latency/performance improvements
  before the merge window closes:

  Stable fixes:

   - fix an incorrect calculation of the RDMA send scatter gather
     element limit

   - fix an Oops when attempting to free resources after RDMA device
     removal

  Bugfixes:

   - SUNRPC: Ensure we always release the TCP socket in a timely fashion
     when the connection is shut down.

   - SUNRPC: Don't call __UDPX_INC_STATS() from a preemptible context

  Latency/Performance:

   - SUNRPC: Queue latency sensitive socket tasks to the less contended
     xprtiod queue

   - SUNRPC: Make the xprtiod workqueue unbounded.

   - SUNRPC: Make the rpciod workqueue unbounded"

* tag 'nfs-for-4.16-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  SUNRPC: Don't call __UDPX_INC_STATS() from a preemptible context
  fix parallelism for rpc tasks
  Make the xprtiod workqueue unbounded.
  SUNRPC: Queue latency-sensitive socket tasks to xprtiod
  SUNRPC: Ensure we always close the socket after a connection shuts down
  xprtrdma: Fix BUG after a device removal
  xprtrdma: Fix calculation of ri_max_send_sges

Pull SCSI target updates from Nicholas Bellinger:
 "The highlights include:

   - numerous target-core-user improvements related to queue full and
     timeout handling. (MNC)

   - prevent target-core-user corruption when invalid data page is
     requested. (MNC)

   - add target-core device action configfs attributes to allow
     user-space to trigger events separate from existing attributes
     exposed to end-users. (MNC)

   - fix iscsi-target NULL pointer dereference 4.6+ regression in CHAP
     error path. (David Disseldorp)

   - avoid target-core backend UNMAP callbacks if range is zero. (Andrei
     Vagin)

   - fix a iscsi-target 4.14+ regression related multiple PDU logins,
     that was exposed due to removal of TCP prequeue support. (Florian
     Westphal + MNC)

  Also, there is a iser-target bug still being worked on for post -rc1
  code to address a long standing issue resulting in persistent
  ib_post_send() failures, for RNICs with small max_send_sge"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (36 commits)
  iscsi-target: make sure to wake up sleeping login worker
  tcmu: Fix trailing semicolon
  tcmu: fix cmd user after free
  target: fix destroy device in target_configure_device
  tcmu: allow userspace to reset ring
  target core: add device action configfs files
  tcmu: fix error return code in tcmu_configure_device()
  target_core_user: add cmd id to broken ring message
  target: add SAM_STAT_BUSY sense reason
  tcmu: prevent corruption when invalid data page requested
  target: don't call an unmap callback if a range length is zero
  target/iscsi: avoid NULL dereference in CHAP auth error path
  cxgbit: call neigh_event_send() to update MAC address
  target: tcm_loop: Use seq_puts() in tcm_loop_show_info()
  target: tcm_loop: Delete an unnecessary return statement in tcm_loop_submission_work()
  target: tcm_loop: Delete two unnecessary variable initialisations in tcm_loop_issue_tmr()
  target: tcm_loop: Combine substrings for 26 messages
  target: tcm_loop: Improve a size determination in two functions
  target: tcm_loop: Delete an error message for a failed memory allocation in four functions
  sbp-target: Delete an error message for a failed memory allocation in three functions
  ...

Pull tracing fixes from Steven Rostedt:
 "Al Viro discovered some breakage with the parsing of the
  set_ftrace_filter as well as the removing of function probes.

  This fixes the code with Al's suggestions. I also added a few
  selftests to test the broken cases such that they wont happen
  again"

* tag 'trace-v4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  selftests/ftrace: Add more tests for removing of function probes
  selftests/ftrace: Add some missing glob checks
  selftests/ftrace: Have reset_ftrace_filter handle multiple instances
  selftests/ftrace: Have reset_ftrace_filter handle modules
  tracing: Fix parsing of globs with a wildcard at the beginning
  ftrace: Remove incorrect setting of glob search field

Pull cifs fixes from Steve French:
 "There are a couple additional security fixes that are still being
  tested that are not in this set."

* tag '4.16-minor-rc-SMB3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  Add missing structs and defines from recent SMB3.1.1 documentation
  address lock imbalance warnings in smbdirect.c
  cifs: silence compiler warnings showing up with gcc-8.0.0
  Add some missing debug fields in server and tcon structs

Pull fbdev fix from Bartlomiej Zolnierkiewicz:
 "Fix building of the omapfb driver (Tomi Valkeinen)"

* tag 'fbdev-v4.16-fix' of git://github.com/bzolnier/linux:
  video: omapfb: fix missing #includes

Having these checks in ibmvnic_xmit causes problems with VLAN
tagging and balance-alb/tlb bonding modes. The restriction they
imposed can be removed.
Signed-off-by: John Allen <jallen@linux.vnet.ibm.com>
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix two issues in the reuseport_bpf selftests that were
reported by Linaro CI:

  [...]
  + ./reuseport_bpf
  ---- IPv4 UDP ----
  Testing EBPF mod 10...
  Reprograming, testing mod 5...
  ./reuseport_bpf: ebpf error. log:
  0: (bf) r6 = r1
  1: (20) r0 = *(u32 *)skb[0]
  2: (97) r0 %= 10
  3: (95) exit
  processed 4 insns
  : Operation not permitted
  + echo FAIL
  [...]
  ---- IPv4 TCP ----
  Testing EBPF mod 10...
  ./reuseport_bpf: failed to bind send socket: Address already in use
  + echo FAIL
  [...]

For the former adjust rlimit since this was the cause of
failure for loading the BPF prog, and for the latter add
SO_REUSEADDR.
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Link: https://bugs.linaro.org/show_bug.cgi?id=3502Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

When SCTP makes INIT or INIT_ACK packet the total chunk length
can exceed SCTP_MAX_CHUNK_LEN which leads to kernel panic when
transmitting these packets, e.g. the crash on sending INIT_ACK:

[  597.804948] skbuff: skb_over_panic: text:00000000ffae06e4 len:120168
               put:120156 head:000000007aa47635 data:00000000d991c2de
               tail:0x1d640 end:0xfec0 dev:<NULL>
...
[  597.976970] ------------[ cut here ]------------
[  598.033408] kernel BUG at net/core/skbuff.c:104!
[  600.314841] Call Trace:
[  600.345829]  <IRQ>
[  600.371639]  ? sctp_packet_transmit+0x2095/0x26d0 [sctp]
[  600.436934]  skb_put+0x16c/0x200
[  600.477295]  sctp_packet_transmit+0x2095/0x26d0 [sctp]
[  600.540630]  ? sctp_packet_config+0x890/0x890 [sctp]
[  600.601781]  ? __sctp_packet_append_chunk+0x3b4/0xd00 [sctp]
[  600.671356]  ? sctp_cmp_addr_exact+0x3f/0x90 [sctp]
[  600.731482]  sctp_outq_flush+0x663/0x30d0 [sctp]
[  600.788565]  ? sctp_make_init+0xbf0/0xbf0 [sctp]
[  600.845555]  ? sctp_check_transmitted+0x18f0/0x18f0 [sctp]
[  600.912945]  ? sctp_outq_tail+0x631/0x9d0 [sctp]
[  600.969936]  sctp_cmd_interpreter.isra.22+0x3be1/0x5cb0 [sctp]
[  601.041593]  ? sctp_sf_do_5_1B_init+0x85f/0xc30 [sctp]
[  601.104837]  ? sctp_generate_t1_cookie_event+0x20/0x20 [sctp]
[  601.175436]  ? sctp_eat_data+0x1710/0x1710 [sctp]
[  601.233575]  sctp_do_sm+0x182/0x560 [sctp]
[  601.284328]  ? sctp_has_association+0x70/0x70 [sctp]
[  601.345586]  ? sctp_rcv+0xef4/0x32f0 [sctp]
[  601.397478]  ? sctp6_rcv+0xa/0x20 [sctp]
...

Here the chunk size for INIT_ACK packet becomes too big, mostly
because of the state cookie (INIT packet has large size with
many address parameters), plus additional server parameters.

Later this chunk causes the panic in skb_put_data():

  skb_packet_transmit()
      sctp_packet_pack()
          skb_put_data(nskb, chunk->skb->data, chunk->skb->len);

'nskb' (head skb) was previously allocated with packet->size
from u16 'chunk->chunk_hdr->length'.

As suggested by Marcelo we should check the chunk's length in
_sctp_make_chunk() before trying to allocate skb for it and
discard a chunk if its size bigger than SCTP_MAX_CHUNK_LEN.
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leinter@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Julian Wiedmann says:

====================
s390/qeth: fixes 2018-02-09

please apply the following two qeth patches for 4.16 and stable.

One restricts a command quirk to the intended commandd type,
while the other fixes an off-by-one during data transmission
that can cause qeth to build malformed buffer descriptors.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

send_control_data() applies some special handling to SETIP v4 IPA
commands. But current code parses *all* command types for the SETIP
command code. Limit the command code check to IPA commands.

Fixes: 5b54e16f ("qeth: do not spin for SETIP ip assist command")
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For a memory range/skb where the last byte falls onto a page boundary
(ie. 'end' is of the form xxx...xxx001), the PFN_UP() part of the
calculation currently doesn't round up to the next PFN due to an
off-by-one error.
Thus qeth believes that the skb occupies one page less than it
actually does, and may select a IO buffer that doesn't have enough spare
buffer elements to fit all of the skb's data.
HW detects this as a malformed buffer descriptor, and raises an
exception which then triggers device recovery.

Fixes: 2863c613 ("qeth: refactor calculation of SBALE count")
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch switch to use kvmalloc_array() for using a vmalloc()
fallback to help in case kmalloc() fails.

Reported-by: syzbot+e4d4f9ddd4295539735d@syzkaller.appspotmail.com
Fixes: 2e0ab8ca ("ptr_ring: array based FIFO for pointers")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

To avoid slab to warn about exceeded size, fail early if queue
occupies more than KMALLOC_MAX_SIZE.

Reported-by: syzbot+e4d4f9ddd4295539735d@syzkaller.appspotmail.com
Fixes: 2e0ab8ca ("ptr_ring: array based FIFO for pointers")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Niklas Cassel says:

====================
stmmac irq fixes/cleanups

A couple of small stmmac irq fixes/cleanups.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

For dwmac4, GMAC_INT_DEFAULT_ENABLE already includes
GMAC_INT_PMT_EN, so it is redundant to check if hw->pmt
is set, and if so, setting the bit again.

For dwmac1000, GMAC_INT_DEFAULT_MASK does not include
GMAC_INT_DISABLE_PMT, so it is redundant to check if
hw->pmt is set, and if so, clearing an already cleared bit.

Improve code readability by removing this redundant code.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

GMAC_INT_DEFAULT_MASK is written to the interrupt enable register.
In previous versions of the IP (e.g. dwmac1000), this register was
instead an interrupt mask register.
To improve clarity and reflect reality, rename GMAC_INT_DEFAULT_MASK
to GMAC_INT_DEFAULT_ENABLE.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The interrupt status register in both dwmac1000 and dwmac4 ignores
interrupt enable (for dwmac4) / interrupt mask (for dwmac1000).
Therefore, if we want to check only the bits that can actually trigger
an irq, we have to filter the interrupt status register manually.

Commit 0a764db1 ("stmmac: Discard masked flags in interrupt status
register") fixed this for dwmac1000. Fix the same issue for dwmac4.

Just like commit 0a764db1 ("stmmac: Discard masked flags in
interrupt status register"), this makes sure that we do not get
spurious link up/link down prints.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When allocating RX or TX buffer pools, the driver needs to provide a
unique mapping ID to firmware for each pool. This value is assigned
using a counter which is incremented after a new pool is created. The
ID can be an integer ranging from 1-255. When migrating to a device
that requests a different number of queues, this value was not being
reset properly. As a result, after enough migrations, the counter
exceeded the upper bound and pool creation failed. This is fixed by
resetting the counter to one in this case.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
pull-request: bpf 2018-02-09

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Two fixes for BPF sockmap in order to break up circular map references
   from programs attached to sockmap, and detaching related sockets in
   case of socket close() event. For the latter we get rid of the
   smap_state_change() and plug into ULP infrastructure, which will later
   also be used for additional features anyway such as TX hooks. For the
   second issue, dependency chain is broken up via map release callback
   to free parse/verdict programs, all from John.

2) Fix a libbpf relocation issue that was found while implementing XDP
   support for Suricata project. Issue was that when clang was invoked
   with default target instead of bpf target, then various other e.g.
   debugging relevant sections are added to the ELF file that contained
   relocation entries pointing to non-BPF related sections which libbpf
   trips over instead of skipping them. Test cases for libbpf are added
   as well, from Jesper.

3) Various misc fixes for bpftool and one for libbpf: a small addition
   to libbpf to make sure it recognizes all standard section prefixes.
   Then, the Makefile in bpftool/Documentation is improved to explicitly
   check for rst2man being installed on the system as we otherwise risk
   installing empty man pages; the man page for bpftool-map is corrected
   and a set of missing bash completions added in order to avoid shipping
   bpftool where the completions are only partially working, from Quentin.

4) Fix applying the relocation to immediate load instructions in the
   nfp JIT which were missing a shift, from Jakub.

5) Two fixes for the BPF kernel selftests: handle CONFIG_BPF_JIT_ALWAYS_ON=y
   gracefully in test_bpf.ko module and mark them as FLAG_EXPECTED_FAIL
   in this case; and explicitly delete the veth devices in the two tests
   test_xdp_{meta,redirect}.sh before dismantling the netnses as when
   selftests are run in batch mode, then workqueue to handle destruction
   might not have finished yet and thus veth creation in next test under
   same dev name would fail, from Yonghong.

6) Fix test_kmod.sh to check the test_bpf.ko module path before performing
   an insmod, and fallback to modprobe. Especially the latter is useful
   when having a device under test that has the modules installed instead,
   from Naresh.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull xen fixes from Juergen Gross:
 "Only five small fixes for issues when running under Xen"

* tag 'for-linus-4.16-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen: Fix {set,clear}_foreign_p2m_mapping on autotranslating guests
  pvcalls-back: do not return error on inet_accept EAGAIN
  xen-netfront: Fix race between device setup and open
  xen/grant-table: Use put_page instead of free_page
  x86/xen: init %gs very early to avoid page faults with stack protector

Pull s390 updates from Heiko Carstens:
 "The main thing in this merge is the defense for the Spectre
  vulnerabilities. But there are other updates as well, the changes in
  more detail:

   - An s390 specific implementation of the array_index_mask_nospec
     function to the defense against spectre v1

   - Two patches to utilize the new PPA-12/PPA-13 instructions to run
     the kernel and/or user space with reduced branch predicton.

   - The s390 variant of the 'retpoline' spectre v2 defense called
     'expoline'. There is no return instruction for s390, instead an
     indirect branch is used for function return

     The s390 defense mechanism for indirect branches works by using an
     execute-type instruction with the indirect branch as the target of
     the execute. In effect that turns off the prediction for the
     indirect branch.

   - Scrub registers in entry.S that contain user controlled values to
     prevent the speculative use of these values.

   - Re-add the second parameter for the s390 specific runtime
     instrumentation system call and move the header file to uapi. The
     second parameter will continue to do nothing but older kernel
     versions only accepted valid real-time signal numbers. The details
     will be documented in the man-page for the system call.

   - Corrections and improvements for the s390 specific documentation

   - Add a line to /proc/sysinfo to display the CPU model dependent
     license-internal-code identifier

   - A header file include fix for eadm.

   - An error message fix in the kprobes code.

   - The removal of an outdated ARCH_xxx select statement"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/kconfig: Remove ARCH_WANTS_PROT_NUMA_PROT_NONE select
  s390: introduce execute-trampolines for branches
  s390: run user space and KVM guests with modified branch prediction
  s390: add options to change branch prediction behaviour for the kernel
  s390/alternative: use a copy of the facility bit mask
  s390: add optimized array_index_mask_nospec
  s390: scrub registers on kernel entry and KVM exit
  s390/cio: fix kernel-doc usage
  s390/runtime_instrumentation: re-add signum system call parameter
  s390/cpum_cf: correct counter number of LAST_HOST_TRANSLATIONS
  s390/kprobes: Fix %p uses in error messages
  s390/runtime instrumentation: provide uapi header file
  s390/sysinfo: add and display licensed internal code identifier
  s390/docs: reword airq section
  s390/docs: mention subchannel types
  s390/cmf: fix kerneldoc
  s390/eadm: fix CONFIG_BLOCK include dependency

Pull more ACPI updates from Rafael Wysocki:
 "These are mostly fixes and cleanups, a few new quirks, a couple of
  updates related to the handling of ACPI tables and ACPICA copyrights
  refreshment.

  Specifics:

   - Update the ACPICA kernel code to upstream revision 20180105
     including:
       * Assorted fixes (Jung-uk Kim)
       * Support for X32 ABI compilation (Anuj Mittal)
       * Update of ACPICA copyrights to 2018 (Bob Moore)

   - Prepare for future modifications to avoid executing the _STA
     control method too early (Hans de Goede)

   - Make the processor performance control library code ignore _PPC
     notifications if they cannot be handled and fix up the C1 idle
     state definition when it is used as a fallback state (Chen Yu,
     Yazen Ghannam)

   - Make it possible to use the SPCR table on x86 and to replace the
     original IORT table with a new one from initrd (Prarit Bhargava,
     Shunyong Yang)

   - Add battery-related quirks for Asus UX360UA and UX410UAK and add
     quirks for table parsing on Dell XPS 9570 and Precision M5530 (Kai
     Heng Feng)

   - Address static checker warnings in the CPPC code (Gustavo Silva)

   - Avoid printing a raw pointer to the kernel log in the smart battery
     driver (Greg Kroah-Hartman)"

* tag 'acpi-part2-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: sbshc: remove raw pointer from printk() message
  ACPI: SPCR: Make SPCR available to x86
  ACPI / CPPC: Use 64-bit arithmetic instead of 32-bit
  ACPI / tables: Add IORT to injectable table list
  ACPI / bus: Parse tables as term_list for Dell XPS 9570 and Precision M5530
  ACPICA: Update version to 20180105
  ACPICA: All acpica: Update copyrights to 2018
  ACPI / processor: Set default C1 idle state description
  ACPI / battery: Add quirk for Asus UX360UA and UX410UAK
  ACPI: processor_perflib: Do not send _PPC change notification if not ready
  ACPI / scan: Use acpi_bus_get_status() to initialize ACPI_TYPE_DEVICE devs
  ACPI / bus: Do not call _STA on battery devices with unmet dependencies
  PCI: acpiphp_ibm: prepare for acpi_get_object_info() no longer returning status
  ACPI: export acpi_bus_get_status_handle()
  ACPICA: Add a missing pair of parentheses
  ACPICA: Prefer ACPI_TO_POINTER() over ACPI_ADD_PTR()
  ACPICA: Avoid NULL pointer arithmetic
  ACPICA: Linux: add support for X32 ABI compilation
  ACPI / video: Use true for boolean value

Pull more power management updates from Rafael Wysocki:
 "These are mostly fixes and cleanups and removal of the no longer
  needed at32ap-cpufreq driver.

  Specifics:

   - Drop the at32ap-cpufreq driver which is useless after the removal
     of the corresponding arch (Corentin LABBE).

   - Fix a regression from the 4.14 cycle in the APM idle driver by
     making it initialize the polling state properly (Rafael Wysocki).

   - Fix a crash on failing system suspend due to a missing check in the
     cpufreq core (Bo Yan).

   - Make the intel_pstate driver initialize the hardware-managed
     P-state control (HWP) feature on CPU0 upon resume from system
     suspend if HWP had been enabled before the system was suspended
     (Chen Yu).

   - Fix up the SCPI cpufreq driver after recent changes (Sudeep Holla,
     Wei Yongjun).

   - Avoid pointer subtractions during frequency table walks in cpufreq
     (Dominik Brodowski).

   - Avoid the check for ProcFeedback in ST/CZ in the cpufreq driver for
     AMD processors and add a MODULE_ALIAS for cpufreq on ARM IMX (Akshu
     Agrawal, Nicolas Chauvet).

   - Fix the prototype of swsusp_arch_resume() on x86 (Arnd Bergmann).

   - Fix up the parsing of power domains DT data (Ulf Hansson)"

* tag 'pm-part2-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  arm: imx: Add MODULE_ALIAS for cpufreq
  cpufreq: Add and use cpufreq_for_each_{valid_,}entry_idx()
  cpufreq: intel_pstate: Enable HWP during system resume on CPU0
  cpufreq: scpi: fix error return code in scpi_cpufreq_init()
  x86: hibernate: fix swsusp_arch_resume() prototype
  PM / domains: Fix up domain-idle-states OF parsing
  cpufreq: scpi: fix static checker warning cdev isn't an ERR_PTR
  cpufreq: remove at32ap-cpufreq
  cpufreq: AMD: Ignore the check for ProcFeedback in ST/CZ
  x86: PM: Make APM idle driver initialize polling state
  cpufreq: Skip cpufreq resume if it's not suspended

Calling __UDPX_INC_STATS() from a preemptible context leads to a
warning of the form:

 BUG: using __this_cpu_add() in preemptible [00000000] code: kworker/u5:0/31
 caller is xs_udp_data_receive_workfn+0x194/0x270
 CPU: 1 PID: 31 Comm: kworker/u5:0 Not tainted 4.15.0-rc8-00076-g90ea9f1b #2
 Workqueue: xprtiod xs_udp_data_receive_workfn
 Call Trace:
  dump_stack+0x85/0xc1
  check_preemption_disabled+0xce/0xe0
  xs_udp_data_receive_workfn+0x194/0x270
  process_one_work+0x318/0x620
  worker_thread+0x20a/0x390
  ? process_one_work+0x620/0x620
  kthread+0x120/0x130
  ? __kthread_bind_mask+0x60/0x60
  ret_from_fork+0x24/0x30

Since we're taking a spinlock in those functions anyway, let's fix the
issue by moving the call so that it occurs under the spinlock.
Reported-by: kernel test robot <fengguang.wu@intel.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

The omapfb driver fails to build after commit 23c35f48
("pinctrl: remove include file from <linux/device.h>") because it
relies on the <linux/pinctrl/consumer.h> and <linux/seq_file.h>
being pulled in by the <linux/device.h> header implicitly.

Include these headers explicitly to avoid the build failures.

Fixes: 23c35f48 ("pinctrl: remove include file from <linux/device.h>")
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
[b.zolnierkie: fix include order and patch description]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

Jesper Dangaard Brouer says:

====================
While playing with using libbpf for the Suricata project, we had
issues LLVM >= 4.0.1 generating ELF files that could not be loaded
with libbpf (tools/lib/bpf/).

During the troubleshooting phase, I wrote a test program and improved
the debugging output in libbpf.  I turned this into a selftests
program, and it also serves as a code example for libbpf in itself.

I discovered that there are at least three ELF load issues with
libbpf.  I left them as TODO comments in (tools/testing/selftests/bpf)
test_libbpf.sh. I've only fixed the load issue with eh_frames, and
other types of relo-section that does not have exec flags.  We can
work on the other issues later.
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

V3: More generic skipping of relo-section (suggested by Daniel)

If clang >= 4.0.1 is missing the option '-target bpf', it will cause
llc/llvm to create two ELF sections for "Exception Frames", with
section names '.eh_frame' and '.rel.eh_frame'.

The BPF ELF loader library libbpf fails when loading files with these
sections.  The other in-kernel BPF ELF loader in samples/bpf/bpf_load.c,
handle this gracefully. And iproute2 loader also seems to work with these
"eh" sections.

The issue in libbpf is caused by bpf_object__elf_collect() skipping
some sections, and later when performing relocation it will be
pointing to a skipped section, as these sections cannot be found by
bpf_object__find_prog_by_idx() in bpf_object__collect_reloc().

This is a general issue that also occurs for other sections, like
debug sections which are also skipped and can have relo section.

As suggested by Daniel.  To avoid keeping state about all skipped
sections, instead perform a direct qlookup in the ELF object.  Lookup
the section that the relo-section points to and check if it contains
executable machine instructions (denoted by the sh_flags
SHF_EXECINSTR).  Use this check to also skip irrelevant relo-sections.

Note, for samples/bpf/ the '-target bpf' parameter to clang cannot be used
due to incompatibility with asm embedded headers, that some of the samples
include. This is explained in more details by Yonghong Song in bpf_devel_QA.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

This script test_libbpf.sh will be part of the 'make run_tests'
invocation, but can also be invoked manually in this directory,
and a verbose mode can be enabled via setting the environment
variable $VERBOSE like:

 $ VERBOSE=yes ./test_libbpf.sh

The script contains some tests that are commented out, as they
currently fail.  They are reminders about what we need to improve
for the libbpf loader library.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

V2: Moved program into selftests/bpf from tools/libbpf

This program can be used on its own for testing/debugging if a
BPF ELF-object file can be loaded with libbpf (from tools/lib/bpf).

If something is wrong with the ELF object, the program have
a --debug mode that will display the ELF sections and especially
the skipped sections.  This allows for quickly identifying the
problematic ELF section number, which can be corrolated with the
readelf tool.

The program signal error via return codes, and also have
a --quiet mode, which is practical for use in scripts like
selftests/bpf.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

While debugging a bpf ELF loading issue, I needed to correlate the
ELF section number with the failed relocation section reference.
Thus, add section numbers/index to the pr_debug.

In debug mode, also print section that were skipped.  This helped
me identify that a section (.eh_frame) was skipped, and this was
the reason the relocation section (.rel.eh_frame) could not find
that section number.

The section numbers corresponds to the readelf tools Section Headers [Nr].
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

I recently fixed up a lot of commits that forgot to keep the tooling
headers in sync.  And then I forgot to do the same thing in commit
cb5f7334 ("bpf: add comments to BPF ld/ldx sizes"). Let correct
that before people notice ;-).

Lawrence did partly fix/sync this for bpf.h in commit d6d4f60c
("bpf: add selftest for tcpbpf").

Fixes: cb5f7334 ("bpf: add comments to BPF ld/ldx sizes")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>