Jiri Pirko says:

====================
mlxsw: Preparations for VRF offload

Ido says:

This patchset aims to prepare the mlxsw driver for VRF offload. The
follow-up patchsets that introduce VRF support can be found here:
https://github.com/idosch/linux/tree/idosch-next

The first four patches are mainly concerned with the netdevice
notification block. There are no functional changes, but merely
restructuring to more easily integrate VRF enslavement.

Patches 5-10 remove various assumptions throughout the code about a
single virtual router (VR) and also restructure the internal data
structures to more accurately represent the device's operation.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When the abort mechanism is invoked it binds the first virtual router
(VR) to an LPM tree and inserts a default route to direct packets to the
CPU.

With VRFs, we can have router interfaces (RIFs) bound to multiple VRs,
so we need to make sure packets are trapped from all VRs and not just
the first one.

Upon abort invocation, bind all active VRs to the same LPM tree and
insert a default route in each.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Up until now we implicitly associated all the router interfaces (RIFs)
with the first virtual router (VR). This must be changed in order to
enable VRF offload. Otherwise, a packet received via a VRF slave would
do a FIB lookup in the same table used by other VRFs.

Instead, bind the RIF to a VR according to the table where FIB lookup
should be performed for packets received via the RIF.

Currently, we only care about the MAIN and LOCAL tables (which we squash
together).
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A virtual router (VR) is an entity within the device to which routing
tables and interfaces can be bound to. It can be used to implement VRFs.

In the initial implementation we associated the VR with a specific
protocol (e.g., IPv4) and an LPM tree. However, this isn't really
accurate, as the same VR can be used for both IPv4 and IPv6 traffic, by
binding a different LPM tree to a {VR, Proto} pair.

This patch aims to restructure the VR code according to the above logic,
so that VRs are more accurately represented by the driver's data
structures. The main motivation behind this change is to prepare the
driver for VRF offload.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When looking for a new LPM tree we should always consider all the unused
trees. It doesn't matter if the new tree is required due to changes in
currently used prefixes inside an existing routing table or because a
route was inserted into an empty table.

Both cases are functionally identical and therefore should be treated
the same.

When looking for a new LPM tree, consider all unused trees and don't
reserve trees for specific cases.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The inetaddr notification block is currently implemented in the main
driver file, but this isn't really appropriate, as it mainly creates and
destroys router interfaces (RIFs) which belong with the rest of the
router code.

This will become even more apparent later on when we'll need to bind
these RIFs to virtual routers according to the VRF's table.

Structure the driver better and prevent unnecessary function exports by
moving the RIF related code with the rest of the router code.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Allow 'unreachable', 'blackhole' and 'prohibit' route types to be
programmed into the device by sending any packet hitting them to the
CPU.

This is needed so that users will be able to program a default route
into the VRF's table, thereby preventing lookup from leaking to other
tables.

Audit the code paths to make sure we don't rely on the presence of a
nexthop netdev, as it doesn't exist for above mentioned route types.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We only use the RIF reference count to determine when the last IP
address was removed, but instead we can just test 'in_dev->ifa_list'.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When a VLAN device is configured on top of a LAG device (f.e.,
bond0.10), a vPort is created on top of each of the LAG's slaves and its
'dev' pointer is set to the VLAN device.

This is in contrast to the implicit PVID vPort (representing 'bond0'),
whose 'dev' pointer keeps pointing to the port netdev itself (f.e.,
'sw1p1').

Make both cases consistent by setting their 'dev' pointer to the actual
netdev they represent. Either the LAG device itself (in the case of the
PVID vPort) or the VLAN device on top of it.

This will later allow us to more easily understand for which netdev we
should create the router interface (RIF) upon enslavement to a VRF
master.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When an upper device is configured on top of a vPort we make sure it's a
bridge master during PRECHANGEUPPER and fail otherwise. Therefore, when
CHANGEUPPER is later received we don't bother checking the upper's type.

Make the code more extendable in preparation for VRF uppers, by checking
the upper's type.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We're going to allow bridges stacked on top of port netdevs to be
enslaved to a VRF, but for now, only VLAN uppers of the VLAN-aware
bridge are supported.

Sanitize any other bridge upper. This is consistent with the way we
sanitize port netdevs' uppers.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jiri Pirko says:

====================
mlxsw: spectrum: Add support for VLAN offload for cls_flower

This patchset adds support to offload VLAN modify TC action and adds support
to offload cls_flower rules that include VID and PCP matching.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Introduce MLXSW_AFK_ELEMENT_VID, PCP and declare them in afk_element
infos that contain them.  Use the elements when VLAD ID or priority are
used in the flow.

Also add MLXSW_AFK_ELEMENT_VID, PCP to mlxsw_sp_acl_tcam_pattern_ipv4.
Both items are included in mlxsw_sp_afk_element_info_l2_dmac,
resp. _smac, and both MLXSW_AFK_ELEMENT_SMAC and _DMAC are already in
the pattern.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add VLAN action offloading. Invoke it from Spectrum flower handler for
"vlan modify" actions.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The functions that are returning tcp sequence number also setup
TS offset value, so rename them to better describe their purpose.

No functional changes in this patch.
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In original driver was implemented support for half-
and full-duplex modes, but it was not enabled. Instead
of it ks8851_rx_1msg method always returns "true" that
means "full-duplex" mode.

This patch replaces hard-coded functionality with
flexible solution that supports both SPI modes.
Signed-off-by: Sergey Shcherbakov <shchers@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Mahesh Bandewar says:

====================
bonding: winter cleanup

Few cleanup patches that I have accumulated over some time now.

(a) First two patches are basically to move the work-queue initialization
    from every ndo_open / bond_open operation to once at the beginning while
    port creation. Work-queue initialization is an unnecessary operation
    for every 'ifup' operation. However we have some mode-specific work-queues
    and mode can change anytime after port creation. So the second patch is
    to ensure the correct work-handler is called based on the mode.

(b) Third patch is simple and straightforward that removes hard-coded value
    that was added into the initial commit and replaces it with the default
    value configured.

(c) The final patch in the series removes the unimplemented "port-moved" state
    from the LACP state machine. This state is defined but never set so
    removing from the state machine logic makes code little cleaner.

(d) Reduce scope of some global variables to local.

Note: None of these patches are making any functional changes.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Many of the bond param variables are declared global while it's not
really necessary for these variables to be global. So moving them to
the location these are used.
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

LACP state-machine defines "port-moved" state when the same ActorSystemID
and Port are seen in a LACPDU received on different port. The state is
never set since it's not implemented. However the state-machine attempts
to clear that state occasionally. LACP state machine is already complicated
and since this state is not implemented, removing it's checks makes the
state-machine little simpler.
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Eliminate hard-coded value and use the default that is set.
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Initializing work-queues every time ifup operation performed is unnecessary
and can be performed only once when the port is created.
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In preparation to move the work-queue initialization to port creation
from current port_open phase. Work-queue initialization does not make
sense every time we do 'ifup/ifdown'. So moving to port creation phase.

Arp monitoring work depends on the bonding mode and that is not tied
to the port creation and can change anytime during the life after port
creation. So this restructuring allows us to move the initialization
at creation without losing the ability to arm the correct work for the
mode user has selected.
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
nfp: CRC32 RSS hash, port name reporting and misc fastpath cleanups

This series adds support for CRC32 RSS hash function to kernel API
of which NFP driver immediately makes use.  There is also a
.ndo_get_phys_port_name() implementation conforming to switchdev
name format.  Small patch takes advantage of napi_complete_done()'s
return code.  Simon provides a fix for potentially trusting values
returned from FW too much.

A handful of unassuming fast path adjustments is also thrown in to make
the upcoming xdp_adjust_head() series easier to review.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Prevent theoretical buffer overrun by returning an error if
the number of entries returned by the firmware does not match those
present.

Also use a common handling error path.

Found by inspection.
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Tested-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We only need FW version in the first cache line of adapter struct
because we need to know the metadata format.  To save space add a
metadata format bit.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make use of return code from napi_complete_done() to avoid rearming
interrupts when busy polling is on.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We really only need the device pointer on the fast path, stash it at
the beginning of the adapter structure and move pci_dev pointer down.
This saves up a few lines of code.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Reorder variables longest to shortest to comply with netdev coding style.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We already print most of ring configuration including descriptors
in debugfs, add the few missing pieces and remove debug prints.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

NSP reports to us port labels.  First id is the id of the physical
port, the other one tells us which logical interface is it within a
split port.  Instead of printing them as string keep them in integer
format.  Compute which interfaces are part of port split.

On netdev side use port labels and split information to provide a
.ndo_get_phys_port_name() implementation.  We follow the name format
of mlxsw which is also suggested in "Port Netdev Naming" section
of Documentation/networking/switchdev.txt.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some firmware images may reuse CRC32 hardware to compute RXHASH.
Make sure we report the correct hash function.  Note that we don't
support changing functions at runtime.  That would also require
a few more additions to the way the key is set because different
functions have different key sizes.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

CRC32 engines are usually easily available in hardware and generate
OK spread for RSS hash.  Add CRC32 RSS hash function to ethtool API.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently the sock queue's spin locks get their lockdep
classes by the default init_spin_lock() initializer:
all socket families get - usually, see below - a single
class for rx, another specific class for tx, etc.
This can lead to false positive lockdep splat, as
reported by Andrey.
Moreover there are two separate initialization points
for the sock queues, one in sk_clone_lock() and one
in sock_init_data(), so that e.g. the rx queue lock
can get one of two possible, different classes, depending
on the socket being cloned or not.
This change tries to address the above, setting explicitly
a per address family lockdep class for each queue's
spinlock. Also, move the duplicated initialization code to a
single location.

v1 -> v2:
 - renamed the init helper

rfc -> v1:
 - no changes, tested with several different workload
Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Synopsys provides a new DesignWare Core Enterprise Ethernet MAC
IP (DWC-XLGMAC) for Ethernet designs. It is compliant with the
IEEE 802.3-2012 specifications, including IEEE 802.3ba and
consortium specifications.

This patch provides the initial 25G/40G/50G/100G Ethernet driver
for Synopsys XLGMAC IP Prototyping Kit.
Signed-off-by: Jie Deng <jiedeng@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Iyappan Subramanian says:

====================
drivers: net: xgene-v2: Add RGMII based 1G driver

This patch set adds support for RGMII based 1GbE hardware which uses a linked
list of DMA descriptor architecture (v2) for APM X-Gene SoCs.

v4: Address review comments from v3
	- fixed local variable declarations to reverse christmas tree order

v3: Address review comments from v2
	- fixed kbuild warnings (this 'if' clause does not guard)

v2: Address review comments from v1
	- moved create_desc_ring and delete_desc_ring to open() and close()
	  respectively
	- changed to use dma_zalloc APIs
	- fixed tx_timeout()
	- removed tx completion polling upper bound
	- added error checking on rx packets
	- added netif_stop_queue() and netif_wake_queue()

v1:
	- Initial version
====================
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds a MAINTAINERS entry for the ethernet driver for
the on-chip ethernet interface which uses a linked list of DMA
descriptor architecture (v2) for APM X-Gene SoCs.
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: Keyur Chudgar <kchudgar@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds,
    - Transmit
    - Transmit completion poll
    - Receive poll
    - NAPI handler

and enables the driver.
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: Keyur Chudgar <kchudgar@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds,

     - probe, remove, shutdown
     - open, close and stats
     - create and delete ring
     - request and delete irq
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: Keyur Chudgar <kchudgar@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds functions to configure ethernet hardware.
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: Keyur Chudgar <kchudgar@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds functions to configure and control mac.  This
patch also adds helper functions to get/set registers.
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: Keyur Chudgar <kchudgar@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>