- 28 Mar, 2011 40 commits
-
-
Dan Carpenter authored
There were two places in sony_nc_add() where we returned zero on failure instead of a negative error code. Signed-off-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
Matthew Garrett <mjg@redhat.com>
-
Dan Carpenter authored
Sparse complains that these variables should be static. Signed-off-by:
-
Keng-Yu Lin authored
Signed-off-by:
Keng-Yu Lin <keng-yu.lin@canonical.com> Signed-off-by:
-
Ike Panhc authored
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=25922 On ideapad Y530, the brightness key notify will be blocked if the last notify is not responsed by getting the brightness value. Read value when we get the notify shall fix the problem and will not have any difference on other ideapads. Signed-off-by:
Ike Panhc <ike.pan@canonical.com> Signed-off-by:
-
Randy Dunlap authored
Fix eeepc-wmi build when CONFIG_HOTPLUG_PCI is not enabled: eeepc-wmi.c:(.text+0x3bc5e9): undefined reference to `pci_hp_deregister' eeepc-wmi.c:(.text+0x3bcca4): undefined reference to `__pci_hp_register' Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Corentin Chary authored
Signed-off-by:
Corentin Chary <corentincj@iksaif.net> Signed-off-by:
-
Corentin Chary authored
Signed-off-by:
-
Corentin Chary authored
I also found some leds ids (0x00020011-0x00020016 and 0x00040015), but since they are not really present on the notebook, I can't guess their name . Signed-off-by:
-
Corentin Chary authored
Introduce a new driver for Asus Notebooks shipped with a WMI device instead of the old ACPI device. The WMI device is almost the same as the one present in Eee PC, but the event guid and the keymap are different. The keymap comes from asus-laptop module. On Asus notebooks, when you call the WMI device, you always need a 64bit buffer, even if you only want to get the state of a device (tested on a G73). Signed-off-by:
-
Corentin Chary authored
Also add some # format flags to debugfs output. Signed-off-by:
-
Corentin Chary authored
INIT() call is needed to enable hotkeys on G73 SPEC() and SFUN() allow us to know more about available features. Signed-off-by:
-
Corentin Chary authored
Signed-off-by:
-
Corentin Chary authored
This is tricky, new WMI aware notebooks seems to use 0x53545344 while Eee PCs are using 0x53544344. But there is no way to know if there is an Eee PC in that wild that is using 0x53545344 or a notebook using 0x53544344. So the driver try to guess the available DSTS method ... But most Eee PCs never return 0xFFFFFFFE when a method is not available, they return 0 instead (and that's useless). So, first, try 0x53544344 then 0x53545344. We will find a better way when we got more data. Signed-off-by:
-
Corentin Chary authored
This patch create a single function to call the WMI methods. This function handle inexistent methods (when implemented by the WMI devices, and this is not the case on Eee PCs), ACPI errors, etc.. Also pack struct bios_arg, and make sure that we always send a 64bit buffer when calling a WMI method, because this is needed on Asus notebooks. Signed-off-by:
-
Corentin Chary authored
Signed-off-by:
-
Corentin Chary authored
First, this allow use to remove the custom asusrfkill_wlan_query, but this will also allow us to give struct asus_wmi * to get_devstate/set_devstate later. Signed-off-by:
-
Corentin Chary authored
Signed-off-by:
-
Corentin Chary authored
New Asus notebooks are using a WMI device similar to the one used in Eee PCs. Since we don't want to load eeepc-wmi module on Asus notebooks, and we want to keep the eeepc-wmi module for backward compatibility, this patch introduce a new module, named asus-wmi, that will be used by eeepc-wmi and the new Asus Notebook WMI Driver. eeepc-wmi's input device strings (device name and phys) are kept, but rfkill and led names are changed (s/eeepc/asus/). This should not break anything since rfkill are used by type or index, not by name, and the eeepc::touchpad led wasn't working correctly before 2.6.39 anyway. Signed-off-by:
-
Corentin Chary authored
New Asus notebooks are using a WMI device similar to the one used in Eee PCs. Since we don't want to load a module named eeepc-laptop on Asus Notebooks, start by copying all the code to asus-wmi.c. Signed-off-by:
-
Durgadoss R authored
This is the basic thermal sensor driver for Intel MID platform using the Medfield chipset. It plugs in via the thermal drivers and provides sensor readings for the device sensors. Signed-off-by:
Durgadoss R <durgadoss.r@intel.com> Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Anssi Hannula authored
Some recent HP laptops use a new wireless query command type 0x1b. Add support for it. Tested on HP Mini 5102. Signed-off-by:
Anssi Hannula <anssi.hannula@iki.fi> Signed-off-by:
-
Anssi Hannula authored
hp_wmi_rfkill_setup cleans up after itself now, so failing completely is no longer necessary. Signed-off-by:
-
Anssi Hannula authored
NULLify rfkill pointers during initialization. This prevents dereference of invalid pointer in case the driver is rebound and some rfkill device isn't detected anymore. Clear them also in hp_wmi_rfkill_setup failure path so that an rfkill initialization failure doesn't need to be fatal for the whole driver. Signed-off-by:
-
Anssi Hannula authored
Split initialization of rfkill devices from hp_wmi_bios_setup() to hp_wmi_rfkill_setup(). This makes the code somewhat cleaner, especially with the future command 0x1b rfkill support. Signed-off-by:
-
Anssi Hannula authored
Split buffersize parameter of hp_wmi_perform_query to insize and outsize. Existing callers are changed to use the same value for insize and outsize to avoid any regressions, with the exception of hp_wmi_set_block where the output buffer is unused and therefore outsize is set to 0 (this change is not seen by BIOS code). The maximum input buffer size is kept at 4 bytes as per struct bios_args. Some commands exist that take longer buffers, but they haven't been implemented. The data portion of bios_args can be trivially made dynamically allocated later when such larger buffers become needed. Signed-off-by:
-
Anssi Hannula authored
Remove the status variable from hp_wmi_perform_query which holds the return value from wmi_evaluate_method(). It is never checked as the function bails out if the output buffer hasn't been allocated which indicates the call failed. Signed-off-by:
-
Anssi Hannula authored
Check BIOS provided return value code in hp_wmi_perform_query and print a warning on error. Printing is suppressed for HPWMI_RET_UNKNOWN_CMDTYPE which is returned when the command type is unsupported. Signed-off-by:
-
Mattia Dongili authored
Reasonably recent Vaios have a 0x12f or 0x137 handler that exposes a fine lid backlight regulation with values ranging from 0 to 255. The patch is based on findings and code from Javier Achirica <achirica@gmail.com> and Marco Chiappero <marco@absence.it> Signed-off-by:
Mattia Dongili <malattia@linux.it> Signed-off-by:
-
Mattia Dongili authored
Recent Vaios have the opportunity to control the keyboard backlight via ACPI calls to the SNC device. Introduce two module parameters to control how keyboard backlight should be set at module loading (default to on and with 10 seconds timeout). Tested-by:
Marco Chiappero <marco@absence.it> Signed-off-by:
-
Mattia Dongili authored
Avoid calling into acpi each time we need to lookup a method handle and report the available handles to ease collection of information when debugging issues. Also move initialization of the platform driver earlier to allow adding files from other setup functions. Signed-off-by:
-
Mattia Dongili authored
Signed-off-by:
-
Mattia Dongili authored
Signed-off-by:
-
Mattia Dongili authored
There is not much use for these events in userspace and handling the events themselves seems to get in the way of the actual activation of the rf devices. The SNC device doesn't expose them already. https://bugzilla.kernel.org/show_bug.cgi?id=15303Signed-off-by:
-
Mattia Dongili authored
Signed-off-by:
-
Mattia Dongili authored
Signed-off-by:
-
Randy Dunlap authored
intel_mid_powerbtn.c uses input interfaces, so it should depend on INPUT to fix build errors when CONFIG_INPUT is not enabled: intel_mid_powerbtn.c:(.text+0x56ca8f): undefined reference to `input_event' intel_mid_powerbtn.c:(.devinit.text+0x2e7b4): undefined reference to `input_allocate_device' intel_mid_powerbtn.c:(.devinit.text+0x2e7ff): undefined reference to `input_set_capability' intel_mid_powerbtn.c:(.devinit.text+0x2e84a): undefined reference to `input_register_device' intel_mid_powerbtn.c:(.devinit.text+0x2e88b): undefined reference to `input_free_device' intel_mid_powerbtn.c:(.devexit.text+0x42f0): undefined reference to `input_unregister_device' Signed-off-by:
-
Colin Ian King authored
Enable volume up and down hotkeys on WMI events GUID 284A0E6B-380E-472A-921F-E52786257FB4 and GUID 02314822-307C-4F66-bf0E-48AEAEB26CC8. Also works around a firmware bug where the _WED method should return an integer containing the key code and in fact the method returns the key code in element zero of a buffer. BugLink: http://bugs.launchpad.net/bugs/701530 BugLink: http://bugs.launchpad.net/bugs/676997Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Hong Liu authored
The power button is connected to MSIC on Medfield, we will get two interrupts from IOAPIC when pressing or releasing the power button. Signed-off-by:
Hong Liu <hong.liu@intel.com> [Minor fixes as noted by Dmitry] Signed-off-by:
Dmitry Torokhov <dtor@mail.ru> Signed-off-by:
-
Corentin Chary authored
These keys are supposed to be handled by any software using the camera (like webKam or cheese...). They can also be used to actually move the camera when possible. Signed-off-by:
-
Corentin Chary authored
Each device seems to be in a "group" (devid >> 16 & 0xFF). Signed-off-by:
-
