* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB/ehca: Reject dynamic memory add/remove when ehca adapter is present
  IB/ehca: Fix reported max number of QPs and CQs in systems with >1 adapter
  IPoIB: Set netdev offload features properly for child (VLAN) interfaces
  IPoIB: Clean up ethtool support
  mlx4_core: Add Ethernet PCI device IDs
  mlx4_en: Add driver for Mellanox ConnectX 10GbE NIC
  mlx4_core: Multiple port type support
  mlx4_core: Ethernet MAC/VLAN management
  mlx4_core: Get ethernet MTU and default address from firmware
  mlx4_core: Support multiple pre-reserved QP regions
  Update NetEffect maintainer emails to Intel emails
  RDMA/cxgb3: Remove cmid reference on tid allocation failures
  IB/mad: Use krealloc() to resize snoop table
  IPoIB: Always initialize poll_timer to avoid crash on unload
  IB/ehca: Don't allow creating UC QP with SRQ
  mlx4_core: Add QP range reservation support
  RDMA/ucma: Test ucma_alloc_multicast() return against NULL, not with IS_ERR()

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  sata_via: load DEVICE register when CTL changes
  libata: set device class to NONE if phys_offline
  libata-eh: fix slave link EH action mask handling
  libata: transfer EHI control flags to slave ehc.i
  libata-sff: fix ata_sff_post_internal_cmd()
  libata: initialize port_task when !CONFIG_ATA_SFF

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] clps711x: add sparsemem definitions
  [ARM] 5315/1: Fix section mismatch warning (sa1111)
  [ARM] Orion: activate workaround for 88f6183 SPI clock erratum
  [ARM] Orion: instantiate the dsa switch driver
  [ARM] mv78xx0: force link speed/duplex on eth2/eth3
  [ARM] remove extra brace in arch/arm/mach-pxa/trizeps4.c
  [ARM] balance parenthesis in header file
  [ARM] pxa: fix trizeps PCMCIA build
  [ARM] pxa: fix trizeps defconfig
  [ARM] dmabounce requires ZONE_DMA
  [ARM] 5303/1: period_cycles should be greater than 1
  [ARM] 5310/1: Fix cache flush functions for ARMv4
  [ARM] pxa: fix 3bca103a
  [ARM] pxa: fix redefinition of NR_IRQS
  [ARM] S3C24XX: Fix redefine of DEFINE_TIMER() in s3c24xx pwm-clock.c
  [ARM] S3C2443: Fix HCLK rate
  [ARM] S3C24XX: Serial driver debug depends on DEBUG_LL
  [ARM] S3C24XX: pwm-clock set_parent mask fix

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: (41 commits)
  [IA64] Fix annoying IA64_TR_ALLOC_MAX message.
  [IA64] kill sys32_pipe
  [IA64] remove sys32_pause
  [IA64] Add Variable Page Size and IA64 Support in Intel IOMMU
  ia64/pv_ops: paravirtualized instruction checker.
  ia64/xen: a recipe for using xen/ia64 with pv_ops.
  ia64/pv_ops: update Kconfig for paravirtualized guest and xen.
  ia64/xen: preliminary support for save/restore.
  ia64/xen: define xen machine vector for domU.
  ia64/pv_ops/xen: implement xen pv_time_ops.
  ia64/pv_ops/xen: implement xen pv_irq_ops.
  ia64/pv_ops/xen: define the nubmer of irqs which xen needs.
  ia64/pv_ops/xen: implement xen pv_iosapic_ops.
  ia64/pv_ops/xen: paravirtualize entry.S for ia64/xen.
  ia64/pv_ops/xen: paravirtualize ivt.S for xen.
  ia64/pv_ops/xen: paravirtualize DO_SAVE_MIN for xen.
  ia64/pv_ops/xen: define xen paravirtualized instructions for hand written assembly code
  ia64/pv_ops/xen: define xen pv_cpu_ops.
  ia64/pv_ops/xen: define xen pv_init_ops for various xen initialization.
  ia64/pv_ops/xen: elf note based xen startup.
  ...

VIA controllers clear DEVICE register when IEN changes.  Make sure
DEVICE is updated along with CTL.

This change is separated from Joseph Chan's larger patch.

  http://thread.gmane.org/gmane.linux.kernel.commits.mm/40640Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Joseph Chan <JosephChan@via.com.tw>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

Reset methods don't have access to phys link status for slave links
and may incorrectly indicate device presence causing unnecessary probe
failures for unoccupied links.  This patch clears device class to NONE
during post-reset processing if phys link is offline.

As on/offlineness semantics is strictly defined and used in multiple
places by the core layer, this won't change behavior for drivers which
don't use slave links.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

Slave link action mask is transferred to master link and all the EH
actions are taken by the master link.  ata_eh_about_to_do() and
ata_eh_done() are called with ATA_EH_ALL_ACTIONS to clear the slave
link actions during transfer.  This always sets ATA_PFLAG_RECOVERED
flag causing spurious "EH complete" messages.

Don't set ATA_PFLAG_RECOVERED for slave link actions.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

ATA_EHI_NO_AUTOPSY and ATA_EHI_QUIET are used to control the behavior
of EH.  As only the master link is visible outside EH, these flags are
set only for the master link although they should also apply to the
slave link, which causes spurious EH messages during probe and
suspend/resume.

This patch transfers those two flags to slave ehc.i before performing
slave autopsy and reporting.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

ata_sff_post_internal_cmd() needs to grab port lock before calling
ata_bmdma_stop() and also need to clear hsm_task_state.  Fix it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

ap->port_task was not initialized if !CONFIG_ATA_SFF later triggering
lockdep warning.  Make sure it's initialized.

Reported by Larry Finger.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

Since the ehca device driver does not support dynamic memory add and
remove operations, the driver must explicitly reject such requests in
order to prevent unpredictable behaviors related to existing memory
regions that cover all of memory being used by InfiniBand protocols in
the kernel.

The solution (for now at least) is to add a memory notifier to the
ehca device driver and if a request for dynamic memory add or remove
comes in, ehca will always reject it.  The user can add or remove
memory by hot-removing the ehca adapter, performing the memory
operation, and then hot-adding the ehca adapter back.
Signed-off-by: Stefan Roscher <stefan.roscher@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Because ehca adapters can differ in the maximum number of QPs and CQs
we have to save the maximum number of these ressources per adapter and
not globally per ehca driver. This fix introduces 2 new members to the
shca structure to store the maximum value for QPs and CQs per adapter.

The module parameters are now used as initial values for those
variables.  If a user selects an invalid number of CQs or QPs we don't
print an error any longer, instead we will inform the user with a
warning and set the values to the respective maximum supported by the
HW.
Signed-off-by: Stefan Roscher <stefan.roscher@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Child devices were created without any offload features set, fix this by
moving the code that computes the features into generic function which is
now called through non-child and child device creation.
Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com>

-- v1 has a bug where the 'result' flag in ipoib_vlan_add may be used uninitialized
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Add a get_rx_csum method.  Remove the driver's own get_tso method, as
the ethtool kernel code uses the default one if nothing is provided.
Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

The Mellanox ConnectX can operate as an InfiniBand adapter, as an
Ethernet NIC, or as a Fibre Channel (FC) HBA.  The kernel has a
low-level driver, mlx4_core, which handles multiplexing access to the
device, and there is also already an InfiniBad driver, mlx4_ib.

This patch adds a new driver, mlx4_en, which implements a standard
Ethernet NIC driver.
Signed-off-by: Liran Liss <liranl@mellanox.co.il>
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Multi-protocol adapters support different port types.  Each consumer
of mlx4_core queries for supported port types; in particular mlx4_ib
can no longer assume that all physical ports belong to it.  Port type
is configured through a sysfs interface.  When the type of a port is
changed, all mlx4 interfaces are unregistered, and then registered
again with the new port types.
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Add support for managing MAC and VLAN filters for each port.
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: Oren Duer <oren@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Get maximum ethernet MTU and default MAC address from the firmware
QUERY_DEV_CAP command.
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

For ethernet support, we need to reserve QPs for the ethernet and
fibre channel driver.  The QPs are reserved at the end of the QP
table.  (This way we assure that they are aligned to their size)

We need to consider these reserved ranges in bitmap creation, so we
extend the mlx4 bitmap utility functions to allow reserved ranges at
both the bottom and the top of the range.
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Fix the edb7211_defconfig build errors.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

This patch fixes the section mismatch warning from
sa1111.o at buildtime.

  CC      arch/arm/common/sa1111.o
  LD      arch/arm/common/built-in.o
  LD      vmlinux.o
  MODPOST vmlinux.o
WARNING: vmlinux.o(.text+0x87f4): Section mismatch in reference from the function sa1111_probe() to the function .devinit.text:sa1110_mb_enable()
The function sa1111_probe() references
the function __devinit sa1110_mb_enable().
This is often because sa1111_probe lacks a __devinit
annotation or the annotation of sa1110_mb_enable is wrong.
Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Commit f06febc9 ("timers: fix itimer/
many thread hang") introduced a new task_cputime interface and
subsequently only converted binfmt_elf over to it.  This results in the
build for binfmt_elf_fdpic blowing up given that p->signal->{u,s}time
have disappeared from underneath us.

Apply the same trivial fix from binfmt_elf to binfmt_elf_fdpic.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Removed duplicated #include <linux/vmalloc.h> in mm/vmalloc.c and
"internal.h" in mm/memory.c.
Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We're trying to keep the !CONFIG_SHMEM tiny-shmem.c (using ramfs without
swap) in synch with CONFIG_SHMEM shmem.c (and mpm is preparing patches
to combine them).  I was glad to see EXPORT_SYMBOL_GPL(shmem_file_setup)
go into shmem.c, but why not support DRM-GEM when !CONFIG_SHMEM too?
But caution says still depend on MMU, since !CONFIG_MMU is.. different.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Matt Mackall <mpm@selenic.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

commit 9b7530cc ("i915: cleanup coding
horrors in i915_gem_gtt_pwrite()")

broke the i386 build for CONFIG_HIGHMEM=y.

Caught by automatic testing http://www.tglx.de/autoqa-logs/000137-0006-0001.logSigned-off-by: Thomas Gleixner <tglx@linutronix.de>
[ My bad. It's the same patch I sent out earlier, nobody noticed then either.. ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

powerpc doesn't use the generic WARN_ON infrastructure.  The newly
introduced WARN() as a result didn't print the message, this patch adds
the printk for this specific case.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This fixes

  kernel/kexec.c: In function 'crash_save_vmcoreinfo_init':
  kernel/kexec.c:1374: error: 'vmlist' undeclared (first use in this function)
  kernel/kexec.c:1374: error: (Each undeclared identifier is reported only once
  kernel/kexec.c:1374: error: for each function it appears in.)
  kernel/kexec.c:1410: error: invalid use of undefined type 'struct vm_struct'
  make[1]: *** [kernel/kexec.o] Error 1
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6:
  parisc: convert to generic compat_sys_ptrace
  parisc: add rtc platform driver
  parisc: initialize unwinder much earlier
  parisc: add new syscalls
  parisc: hijack jump to start_kernel
  parisc: add pdc_coproc_cfg_unlocked and set_firmware_width_unlocked
  parisc: move include/asm-parisc to arch/parisc/include/asm
  parisc: move pdc_result to real2.S
  parisc: unify CCIO_COLLECT_STATS implementation
  parisc: add arch/parisc/kernel/.gitignore
  parisc: ropes.h - fix <asm-parisc/*> -> <asm/*>
  parisc: parisc-agp - fix <asm-parisc/*> -> <asm/*>

Resolve remove/rename conflict: include/asm-parisc/a.out.h is no longer
relevant.

This gets rid of an annoying warning in ehci-hcd.c when DEBUG isn't
enabled:

    warning: label 'err_debug' defined but not used

by moving it inside the already-existing #ifdef DEBUG, so that it
matches the goto.  And now my regular build is warning-free again.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Yes, this will probably be switched over to a cleaner model anyway, but
in the meantime I don't want to see the 'unused variable' warnings that
come from the disgusting #ifdef code.  Make the special case be a nice
inlien function of its own, clean up the code, and make the warning go
away.

I wish people didn't write code that gets (valid) warnings from the
compiler, but I'll limit my fixes to code that I actually care about (in
this case just because I see the warning and it annoys me).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use "%zd" for size_t, and make sure to have a space between the numbers
instead of depending on the field width.

I don't like warnings in my default targeted build.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'bkl-removal' of git://git.lwn.net/linux-2.6:
  UIO: BKL removal

* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (41 commits)
  PCI: fix pci_ioremap_bar() on s390
  PCI: fix AER capability check
  PCI: use pci_find_ext_capability everywhere
  PCI: remove #ifdef DEBUG around dev_dbg call
  PCI hotplug: fix get_##name return value problem
  PCI: document the pcie_aspm kernel parameter
  PCI: introduce an pci_ioremap(pdev, barnr) function
  powerpc/PCI: Add legacy PCI access via sysfs
  PCI: Add ability to mmap legacy_io on some platforms
  PCI: probing debug message uniformization
  PCI: support PCIe ARI capability
  PCI: centralize the capabilities code in probe.c
  PCI: centralize the capabilities code in pci-sysfs.c
  PCI: fix 64-vbit prefetchable memory resource BARs
  PCI: replace cfg space size (256/4096) by macros.
  PCI: use resource_size() everywhere.
  PCI: use same arg names in PCI_VDEVICE comment
  PCI hotplug: rpaphp: make debug var unique
  PCI: use %pF instead of print_fn_descriptor_symbol() in quirks.c
  PCI: fix hotplug get_##name return value problem
  ...

Merge branch 'tracing-v28-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'tracing-v28-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (131 commits)
  tracing/fastboot: improve help text
  tracing/stacktrace: improve help text
  tracing/fastboot: fix initcalls disposition in bootgraph.pl
  tracing/fastboot: fix bootgraph.pl initcall name regexp
  tracing/fastboot: fix issues and improve output of bootgraph.pl
  tracepoints: synchronize unregister static inline
  tracepoints: tracepoint_synchronize_unregister()
  ftrace: make ftrace_test_p6nop disassembler-friendly
  markers: fix synchronize marker unregister static inline
  tracing/fastboot: add better resolution to initcall debug/tracing
  trace: add build-time check to avoid overrunning hex buffer
  ftrace: fix hex output mode of ftrace
  tracing/fastboot: fix initcalls disposition in bootgraph.pl
  tracing/fastboot: fix printk format typo in boot tracer
  ftrace: return an error when setting a nonexistent tracer
  ftrace: make some tracers reentrant
  ring-buffer: make reentrant
  ring-buffer: move page indexes into page headers
  tracing/fastboot: only trace non-module initcalls
  ftrace: move pc counter in irqtrace
  ...

Manually fix conflicts:
 - init/main.c: initcall tracing
 - kernel/module.c: verbose level vs tracepoints
 - scripts/bootgraph.pl: fallout from cherry-picking commits.

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86 ACPI: fix breakage of resume on 64-bit UP systems with SMP kernel
  Introduce is_vmalloc_or_module_addr() and use with DEBUG_VIRTUAL

Merge branch 'genirq-v28-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

This merges branches irq/genirq, irq/sparseirq-v4, timers/hpet-percpu
and x86/uv.

The sparseirq branch is just preliminary groundwork: no sparse IRQs are
actually implemented by this tree anymore - just the new APIs are added
while keeping the old way intact as well (the new APIs map 1:1 to
irq_desc[]).  The 'real' sparse IRQ support will then be a relatively
small patch ontop of this - with a v2.6.29 merge target.

* 'genirq-v28-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (178 commits)
  genirq: improve include files
  intr_remapping: fix typo
  io_apic: make irq_mis_count available on 64-bit too
  genirq: fix name space collisions of nr_irqs in arch/*
  genirq: fix name space collision of nr_irqs in autoprobe.c
  genirq: use iterators for irq_desc loops
  proc: fixup irq iterator
  genirq: add reverse iterator for irq_desc
  x86: move ack_bad_irq() to irq.c
  x86: unify show_interrupts() and proc helpers
  x86: cleanup show_interrupts
  genirq: cleanup the sparseirq modifications
  genirq: remove artifacts from sparseirq removal
  genirq: revert dynarray
  genirq: remove irq_to_desc_alloc
  genirq: remove sparse irq code
  genirq: use inline function for irq_to_desc
  genirq: consolidate nr_irqs and for_each_irq_desc()
  x86: remove sparse irq from Kconfig
  genirq: define nr_irqs for architectures with GENERIC_HARDIRQS=n
  ...