- 16 Jan, 2017 3 commits
-
-
Gilad Ben-Yossef authored
ah6 input processing uses the asynchronous hash crypto API which supplies an error code as part of the operation completion but the error code was being ignored. Treat a crypto API error indication as a verification failure. While a crypto API reported error would almost certainly result in a memcpy of the digest failing anyway and thus the security risk seems minor, performing a memory compare on what might be uninitialized memory is wrong. Signed-off-by:
Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com>
-
Gilad Ben-Yossef authored
ah4 input processing uses the asynchronous hash crypto API which supplies an error code as part of the operation completion but the error code was being ignored. Treat a crypto API error indication as a verification failure. While a crypto API reported error would almost certainly result in a memcpy of the digest failing anyway and thus the security risk seems minor, performing a memory compare on what might be uninitialized memory is wrong. Signed-off-by:
-
Florian Westphal authored
Dan reports following smatch warning: net/xfrm/xfrm_state.c:659 error: we previously assumed 'afinfo' could be null (see line 651) 649 struct xfrm_state_afinfo *afinfo = xfrm_state_afinfo_get_rcu(family); 651 if (afinfo) ... 658 } 659 afinfo->init_temprop(x, tmpl, daddr, saddr); I am resonably sure afinfo cannot be NULL here. xfrm_state4.c and state6.c are both part of ipv4/ipv6 (depends on CONFIG_XFRM, a boolean) but even if ipv6 is a module state6.c can't be removed (ipv6 lacks module_exit so it cannot be removed). The only callers for xfrm6_fini that leads to state backend unregister are error unwinding paths that can be called during ipv6 init function. So after ipv6 module is loaded successfully the state backend cannot go away anymore. The family value from policy lookup path is taken from dst_entry, so that should always be AF_INET(6). However, since this silences the warning and avoids readers of this code wondering about possible null deref it seems preferrable to be defensive and just add the old check back. Fixes: 711059b9 ("xfrm: add and use xfrm_state_afinfo_get_rcu") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
- 10 Jan, 2017 5 commits
-
-
Florian Westphal authored
Instead of: if (foo) { unlock(); return bar(); } unlock(); do: unlock(); if (foo) return bar(); This is ok because rcu protected structure is only dereferenced before the conditional. Signed-off-by: -
Florian Westphal authored
xfrm_init_tempstate is always called from within rcu read side section. We can thus use a simpler function that doesn't call rcu_read_lock again. While at it, also make xfrm_init_tempstate return value void, the return value was never tested. A followup patch will replace remaining callers of xfrm_state_get_afinfo with xfrm_state_afinfo_get_rcu variant and then remove the 'old' get_afinfo interface. Signed-off-by:
-
Florian Westphal authored
commit 44abdc30 ("xfrm: replace rwlock on xfrm_state_afinfo with rcu") made xfrm_state_put_afinfo equivalent to rcu_read_unlock. Use spatch to replace it with direct calls to rcu_read_unlock: @@ struct xfrm_state_afinfo *a; @@ - xfrm_state_put_afinfo(a); + rcu_read_unlock(); old: text data bss dec hex filename 22570 72 424 23066 5a1a xfrm_state.o 1612 0 0 1612 64c xfrm_output.o new: 22554 72 424 23050 5a0a xfrm_state.o 1596 0 0 1596 63c xfrm_output.o Signed-off-by:
-
Florian Westphal authored
xfrm/xfrm_state.c:1973:21: error: incompatible types in comparison expression (different address spaces) Harmless, but lets fix it to reduce the noise. While at it, get rid of unneeded NULL check, its never hit: net/ipv4/xfrm4_state.c: xfrm_state_register_afinfo(&xfrm4_state_afinfo); net/ipv6/xfrm6_state.c: return xfrm_state_register_afinfo(&xfrm6_state_afinfo); net/ipv6/xfrm6_state.c: xfrm_state_unregister_afinfo(&xfrm6_state_afinfo); ... are the only callsites. Signed-off-by:
-
Florian Westphal authored
Has been ifdef'd out for more than 10 years, remove it. Signed-off-by:
-
- 06 Jan, 2017 1 commit
-
-
Florian Westphal authored
Once flow cache gets removed the mtu initialisation happens for every skb that gets an xfrm attached, so this lock starts to show up in perf. It is not obvious why this lock is required -- the caller holds reference on the state struct, type->destructor is only called from the state gc worker (all state structs on gc list must have refcount 0). xfrm_init_state already has been called (else private data accessed by type->get_mtu() would not be set up). So just remove the lock -- the race on the state (DEAD?) doesn't matter (could change right after dropping the lock too). Signed-off-by:
-
- 04 Jan, 2017 1 commit
-
-
Alexander Alemayhu authored
o s/descentant/descendant o s/workarbound/workaround Signed-off-by:
Alexander Alemayhu <alexander@alemayhu.com> Signed-off-by:
-
- 02 Jan, 2017 30 commits
-
-
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by:Philippe Reynes <tremyfr@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: -
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: -
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: -
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. The previous implementation of set_settings was modifying the value of speed and duplex, but with the new API, it's not possible. The structure ethtool_link_ksettings is defined as const. Signed-off-by: -
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: -
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: -
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: -
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: -
Philippe Reynes authored
There is a function in mdio for the old ethtool api gset. We add a new function mdio45_ethtool_ksettings_get for the new ethtool api glinksettings. Signed-off-by:
-
David S. Miller authored
Saeed Mahameed says: ==================== Mellanox mlx5 core and ODP updates 2017-01-01 The following eleven patches mainly come from Artemy Kovalyov who expanded mlx5 on-demand-paging (ODP) support. In addition there are three cleanup patches which don't change any functionality, but are needed to align codebase prior accepting other patches. Memory region (MR) in IB can be huge and ODP (on-demand paging) technique allows to use unpinned memory, which can be consumed and released on demand. This allows to applications do not pin down the underlying physical pages of the address space, and save from them need to track the validity of the mappings. Rather, the HCA requests the latest translations from the OS when pages are not present, and the OS invalidates translations which are no longer valid due to either non-present pages or mapping changes. In existing ODP implementation applications is needed to register memory buffers for communication, though registered memory regions need not have valid mappings at registration time. This patch set performs the following steps to expand current ODP implementation: 1. It refactors UMR to support large regions, by introducing generic function to perform HCA translation table modifications. This function supports both atomic and process contexts and is not limited by number of modified entries. This function allows to enable reallocated memory regions of arbitrary size, so adding MR cache buckets to support up to 16GB MRs. 2. It changes page fault event format and refactor page faults logic together with addition of atomic support. 3. It prepares mlx5 core code to support implicit registration with simplified and relaxed semantics. Implicit ODP semantics allows to applications provide special memory key that represents their complete address space. Thus all IO accesses referencing to this key (with proper access rights associated with the key) wouldn't need not register any virtual address range. Thanks, Artemy, Ilya and Leon v1->v2: - Don't use 'inline' in .c files ==================== Signed-off-by: -
Artemy Kovalyov authored
Add "type" field to mlx5_core MKEY struct. Check whether page fault happens on MKEY corresponding to MR. Signed-off-by:
Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Artemy Kovalyov authored
Handle ODP atomic operations. When initiator of RDMA atomic operation use ODP MR to provide source data handle pagefault properly. Signed-off-by:
-
Artemy Kovalyov authored
* Update page fault event according to last specification. * Separate code path for page fault EQ, completion EQ and async EQ. * Move page fault handling work queue from mlx5_ib static variable into mlx5_core page fault EQ. * Allocate memory to store ODP event dynamically as the events arrive, since in atomic context - use mempool. * Make mlx5_ib page fault handler run in process context. Signed-off-by:
-
Artemy Kovalyov authored
Update PAGE_FAULT_RESUME command layout. Three bit fields describing page fault: rdma, rdma_write, req_res gave 8 possible combinations, while only a few were legal. Now they are interpreted as three-bit type field, where former legal combinations turns into corresponding types and unused were added as new types. Signed-off-by:
-
Artemy Kovalyov authored
In this change we turn mlx5_ib_update_mtt() into generic mlx5_ib_update_xlt() to perfrom HCA translation table modifiactions supporting both atomic and process contexts and not limited by number of modified entries. Using this function we increase preallocated MRs up to 16GB. Signed-off-by:
-
Artemy Kovalyov authored
Make use of extended UMR translation offset. Signed-off-by:
-
Artemy Kovalyov authored
* Update struct mlx5_wqe_umr_ctrl_seg. * Currenlty UMR send_flags aim only certain use cases: enabled/disable cached MR, modifying XLT for ODP. By making flags independent make UMR more flexible allowing arbitrary manipulations. * Since different UMR formats have different entry sizes UMR request should receive exact size of translation table update instead of number of entries. Rename field npages to xlt_size in struct mlx5_umr_wr and update relevant code accordingly. * Add support of length64 bit. Signed-off-by:
-
Artemy Kovalyov authored
This patch adds the following items to IFC file. 1. MLX5_MKC_ACCESS_MODE_KSM enum value for creating KSM memory keys. KSM access mode used when indirect MKey associated with fixed memory size entries. 2. null_mkey field that is used to indicate non-present KLM/KSM entries, where it causes the device to generate page fault event when trying to access it. 3. struct mlx5_ifc_cmd_hca_cap_bits capability bits indicating related value/field is supported: * fixed_buffer_size - MLX5_MKC_ACCESS_MODE_KSM * umr_extended_translation_offset - translation_offset_42_16 in UMR ctrl segment * null_mkey - null_mkey in QUERY_SPECIAL_CONTEXTS Signed-off-by: -
Binoy Jayan authored
Clean up the following common code (to post a list of work requests to the send queue of the specified QP) at various places and add a helper function 'mlx5_ib_post_send_wait' to implement the same. - Initialize 'mlx5_ib_umr_context' on stack - Assign "mlx5_umr_wr:wr:wr_cqe to umr_context.cqe - Acquire the semaphore - call ib_post_send with a single ib_send_wr - wait_for_completion() - Check for umr_context.status - Release the semaphore Signed-off-by:
Binoy Jayan <binoy.jayan@linaro.org> Signed-off-by:
-
Leon Romanovsky authored
The order of features exposed by private mlx5-abi.h file is CQE zipping, packet pacing and multi-packet WQE. The internal order implemented in mlx5_ib_query_device() is multi-packet WQE, CQE zipping and packet pacing. Such difference hurts code readability, so let's sync, while mlx5-abi.h (exposed to userspace) is the primary order. This commit doesn't change any functionality. Signed-off-by:
-
Max Gurtovoy authored
Fix offset for reserved fields. Fixes: 7486216b ("{net,IB}/mlx5: mlx5_ifc updates") Fixes: b4ff3a36 ("net/mlx5: Use offset based reserved field names in the IFC header file") Fixes: 7d5e1423 ("net/mlx5: Update mlx5_ifc hardware features") Signed-off-by:
Max Gurtovoy <maxg@mellanox.com> Reviewed-by:
-
David S. Miller authored
Merge tag 'wireless-drivers-next-for-davem-2017-01-02' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.11 The most notable change here is the inclusion of airtime fairness scheduling to ath9k. It prevents slow clients from hogging all the airtime and unfairly slowing down faster clients. Otherwise smaller changes and cleanup. Major changes: ath9k * cleanup eeprom endian handling * add airtime fairness scheduling ath10k * fix issues for new QCA9377 firmware version * support dev_coredump() for firmware crash dump * enable channel 169 on 5 GHz band ==================== Signed-off-by:
-
Niklas Cassel authored
For core revision 3.x Address-Aligned Beats is available in two registers. The DT property snps,aal was created for AAL in the DMA bus register, which is a read/write bit. The DT property snps,axi_all was created for AXI_AAL in the AXI bus mode register, which is a read only bit that reflects the value of AAL in the DMA bus register. Since the value of snps,axi_all is never used in the driver, and since the property was created for a bit that is read only, it should be safe to remove the property. Acked-by:
Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by:
Niklas Cassel <niklas.cassel@axis.com> Signed-off-by:
-
David S. Miller authored
Yuval Mintz says: ==================== qed*: Driver updates The more interesting changes in this series include: - Restructuring of the qede files - qede_main.c has grown big and this series splits it into 3 parts [patches #2 and #3]. - Some significant changes in the API through which RSS indirection table gets configured [#8]. - Support for ndo_set_vf_trust() [#9] which would regulate which VFs are allowed to use promisc/multi-promisc mode. It also contains various minor changes to qed/qede, as well as non-functional changes [#1, #12] to complement other changes. ==================== Signed-off-by: -
Mintz, Yuval authored
Signed-off-by:
Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by:
-
Ram Amrani authored
If qedr isn't part of the kernel then don't allocate RDMA resources for it in qed. Signed-off-by:
Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by:
-
Mintz, Yuval authored
Currently multicast traffic wouldn't be routed internally to listener; Instead it would only be sent to network via the physical carrier. Signed-off-by:
-
Mintz, Yuval authored
Trusted VFs would be allowed to receive promiscuous and multicast promiscuous data. Signed-off-by:
-
Mintz, Yuval authored
A step toward having qede agnostic to the queue configurations in firmware/hardware - let the RSS indirections use queue handles instead of actual queue indices. Signed-off-by:
-
