- 07 Nov, 2018 40 commits
-
-
Yangtao Li authored
ture->true Signed-off-by:
Yangtao Li <tiny.windzz@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Yangtao Li authored
ture->true Signed-off-by:
-
Ian Abbott authored
The `insn_write` handler for the AO subdevice (`labpc_ao_insn_write()`) currently ignores `insn->n` (the number of samples to write) and assumes a single sample is to be written. But `insn->n` could be 0, meaning no samples should be written, in which case `data[0]` is invalid. Follow the usual Comedi guidelines and change `labpc_ao_insn_write()` to write the specified number of samples. This fixes the assumption that `data[0]` is valid. Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Ian Abbott authored
The `insn_write` handler for the AO subdevice (`cb_pcidda_ao_insn_write()`) currently ignores `insn->n` (the number of samples to write) and assumes a single sample is to be written. But `insn->n` could be 0, meaning no samples should be written, in which case `data[0]` is invalid. Follow the usual Comedi guidelines and change `cb_pcidda_ao_insn_write()` to write the specified number of samples. This fixes the assumption that `data[0]` is valid. Signed-off-by:
-
Ian Abbott authored
The `insn_read` handler for the EEPROM subdevice (`apci3501_eeprom_insn_read()`) currently ignores `insn->n` (the number of samples to be read) and assumes a single sample is to be read. But `insn->n` could be 0, meaning no samples should be read, in which case `data[0]` ought not to be written. (The comedi core at least ensures that `data[0]` exists, but we should not rely on that.) Following the usual Comedi guidelines and interpret `insn->n` as the number of samples to be read, but only read the EEPROM location once and make `insn->n` copies, as we don't expect the contents of the EEPROM location to change between readings. Signed-off-by:
-
Ian Abbott authored
The contents of the Comedi configuration instruction `INSN_CONFIG_TIMER_1` instruction are not very well defined, but the one driver that uses it (the "cb_pcidas64" driver for the PCI-DAS4020/12 card) assumes its `insn->n` is 5. Add a check in `check_insn_config_length()` to verify that `insn->n` is correct for this configuration instruction. Signed-off-by:
-
Ian Abbott authored
The `insn_read` handler for the EEPROM subdevice (`eeprom_insn_read()`) currently ignores `insn->n` (the number of samples to be read) and assumes a single sample is to be read. But `insn->n` could be 0, meaning no samples should be read, in which case `data[0]` ought not to be written. (The comedi core at least ensures that `data[0]` exists, but we should not rely on that.) Follow the usual Comedi guidelines and interpret `insn->n` as the number of samples to be read, but only read the EEPROM location once and make `insn->n` copies, as we don't expect the contents of the EEPROM location to change between readings. Signed-off-by:
-
Ian Abbott authored
The `insn_write` handler for the AO subdevice (`ao_winsn()` currently ignores `insn->n` (the number of samples to write) and assumes a single sample is to be written. But `insn->n` could be 0, meaning no samples should be written, in which case `data[0]` is invalid. Follow the usual Comedi guidelines and change `ao_winsn()` to write the specified number of samples. This fixes the assumption that `data[0]` is valid. Signed-off-by:
-
Hans de Goede authored
Use DRM_FB_HELPER_DEFAULT_OPS rather then open-coding it. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Hans de Goede authored
This is a leftover from when the driver was out of tree and also build against older kernels. Signed-off-by:
-
Hans de Goede authored
Add myself as MODULE_AUTHOR. Signed-off-by:
-
Hans de Goede authored
Add #ifdef CONFIG_PM_SLEEP around the suspend/hibernate functions. Remove unnecessary #ifdef CONFIG_COMPAT, the .compat_ioctl member is always available and if CONFIG_COMPAT is not set then drm_compat_ioctl is defined to NULL. Signed-off-by:
-
Hans de Goede authored
Use PCI_DEVICE() for our pci_id table and also simplify the terminating entry tio just "{ }". Signed-off-by: -
Hans de Goede authored
Stop adding -Iinclude/drm to the CFLAGS and stop using the obsolete "include-all" drm/drmP.h header. Signed-off-by:
-
Michael Straube authored
Cleanup a line over 80 characters in rtw_hal_xmit() by using if(x) instead of if(x == true). Also clears a missing spaces around '|' checkpatch issue. Signed-off-by:
Michael Straube <straube.linux@gmail.com> Signed-off-by:
-
Michael Straube authored
The function rtw_hal_xmit() returns true or false. Change the return type from s32 to bool. Signed-off-by:
-
Michael Straube authored
The function rtl8188eu_xmitframe_complete() returns true or false. Change the return type from s32 to bool. Signed-off-by:
-
Michael Straube authored
The field enable of struct recv_reorder_ctrl is only used for boolean values, so change the type from u8 to bool. Signed-off-by:
-
Michael Straube authored
The field accept_addba_req of struct mlme_ext_info has type bool. Use the value of accept_addba_req directly instead of the ternary operator in an asignment. Signed-off-by:
-
Michael Straube authored
The variable is_cck_rate is used for boolean values, so change the type from u8 to bool. The initializations to zero and use of ternary operator in the assignments are unnecessary, remove them as well. Suggested-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Michael Straube authored
Rename the variable isCCKrate to avoid CamelCase. isCCKrate -> is_cck_rate Signed-off-by:
-
Michael Straube authored
Rename the variable Max_spatial_stream to avoid CamelCase. Max_spatial_stream -> max_spatial_stream Signed-off-by:
-
Michael Straube authored
Use clamp() to simplify code in odm_evm_db_to_percentage(). Signed-off-by:
-
Nicolas Saenz Julienne authored
The following tasks were completed or not the right solution: 1/2- Not the proper solution, we should register a platform device in vchiq the same way it's done with bcm2835-camera as commented here: https://lkml.org/lkml/2018/10/16/1131 2/3- Fixed by Takashi Iwai here: https://lkml.org/lkml/2018/9/4/587 Also, adds a new task as per mailing list conversation. Signed-off-by:
Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Acked-by:
Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by:
-
Nicolas Saenz Julienne authored
It was called bcm2835_alsa0_driver, that "0" didn't mean much. Suggested-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Nicolas Saenz Julienne authored
There will only be one probe function, there is no use for appendig "_dt" the end of the name. Signed-off-by:
-
Nicolas Saenz Julienne authored
In this case explicitly naming the union doesn't help overall code comprehension and clutters it. Signed-off-by:
-
Nicolas Saenz Julienne authored
When it comes to declaring variables it's preferred, when possible, to use an inverted tree organization scheme. Also, removes some comments that were useless. Signed-off-by:
-
Nicolas Saenz Julienne authored
The memory is being allocated with devres_alloc(), wich ultimately uses __GFP_ZERO to call kmalloc. We don't need to zero the memory area again in bcm2835-audio. Signed-off-by:
-
Nicolas Saenz Julienne authored
The device communicates with the audio core using FOURCC codes. The driver was generating them using different macros/expressions. We now use the same macro to create them and centralize all the definitions. Signed-off-by:
-
Cristian Sicilia authored
This patch fixes two line ending with parenthesis, which did not conform to the linux kernel coding style. Signed-off-by:
Cristian Sicilia <sicilia.cristian@gmail.com> Signed-off-by:
-
Rohit Sarkar authored
"Exiting" instead of "Exitting" Signed-off-by:
Rohit Sarkar <rohitsarkar5398@gmail.com> Signed-off-by:
-
Laís Pessine do Carmo authored
Add spaces around '+' to correct the following checkpath.pl warnings: WARNING: line over 80 characters + write_dpPort(accel, *(unsigned int *)(pSrcbuf + (j * 4))); WARNING: line over 80 characters + memcpy(ajRemain, pSrcbuf+ul4BytesPerScan, ulBytesRemain); Signed-off-by:
Laís Pessine do Carmo <laispc19@gmail.com> Signed-off-by:
-
Colin Ian King authored
Rename struct _rt_firmare_seg_container to _fw_seg_container to match the typedef name of this structure. Also removes the spelling mistake of 'firmare'. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Colin Ian King authored
Trivial fix to clean up indentation issues across the driver Signed-off-by:
Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by:
-
Colin Ian King authored
Trivial fix to clean up an indentation issue Signed-off-by:
-
Robert Eshleman authored
Rename fields in fw_priv struct from CamelCase to snake_case. Reported by checkpatch. Signed-off-by:
Robert Eshleman <bobbyeshleman@gmail.com> Signed-off-by:
-
Colin Ian King authored
Trivial fix to common spelling mistakes in some rtl* drivers Signed-off-by:
-
Jeeeun Evans authored
Cleanup extra line found by checkpatch.pl Signed-off-by:
Jeeeun Evans <jeeeunevans@gmail.com> Signed-off-by:
-
Nícolas F. R. A. Prado authored
Correct the following warning from checkpatch.pl: WARNING: Missing a blank line after declarations + struct msdc_host *host = mmc_priv(mmc); + msdc_pm(state, (void *)host); Signed-off-by:
Nícolas F. R. A. Prado <nfraprado@protonmail.com> Signed-off-by:
-
